From d9a2c2204fca866385e2c8a858846afcc9ea3f61 Mon Sep 17 00:00:00 2001 From: Patrick Lee <31744877+patricklee2@users.noreply.github.com> Date: Mon, 2 Apr 2018 13:29:55 -0700 Subject: [PATCH] php-fpm + nginx --- 7.2.5-nginx-fpm-xdebug/Dockerfile.template | 9 + 7.2.5-nginx-fpm-xdebug/Readme.md | 3 + 7.2.5-nginx-fpm/Dockerfile | 172 +++++++++ 7.2.5-nginx-fpm/hostingstart.html | 38 ++ 7.2.5-nginx-fpm/init_container.sh | 49 +++ 7.2.5-nginx-fpm/nginx.conf | 51 +++ 7.2.5-nginx-fpm/php-fpm.init | 156 ++++++++ 7.2.5-nginx-fpm/sshd_config | 15 + 7.2.5-nginx-fpm/www.conf | 425 +++++++++++++++++++++ 7.2.5-nginx-fpm/zz-docker.conf | 6 + build.sh | 10 + 11 files changed, 934 insertions(+) create mode 100644 7.2.5-nginx-fpm-xdebug/Dockerfile.template create mode 100644 7.2.5-nginx-fpm-xdebug/Readme.md create mode 100644 7.2.5-nginx-fpm/Dockerfile create mode 100644 7.2.5-nginx-fpm/hostingstart.html create mode 100644 7.2.5-nginx-fpm/init_container.sh create mode 100644 7.2.5-nginx-fpm/nginx.conf create mode 100644 7.2.5-nginx-fpm/php-fpm.init create mode 100644 7.2.5-nginx-fpm/sshd_config create mode 100644 7.2.5-nginx-fpm/www.conf create mode 100644 7.2.5-nginx-fpm/zz-docker.conf diff --git a/7.2.5-nginx-fpm-xdebug/Dockerfile.template b/7.2.5-nginx-fpm-xdebug/Dockerfile.template new file mode 100644 index 00000000..cad007e7 --- /dev/null +++ b/7.2.5-nginx-fpm-xdebug/Dockerfile.template @@ -0,0 +1,9 @@ +FROM reponame/php:7.2.5-nginx-fpm_buildnumber + +LABEL maintainer="Azure App Services Container Images " + +RUN yes | pecl install xdebug \ + && echo "zend_extension=$(find /usr/local/lib/php/extensions/ -name xdebug.so)" > /usr/local/etc/php/conf.d/xdebug.ini \ + && echo "xdebug.remote_enable=on" >> /usr/local/etc/php/conf.d/xdebug.ini \ + && echo "xdebug.remote_autostart=off" >> /usr/local/etc/php/conf.d/xdebug.ini \ + && echo "xdebug.profiler_output_dir=/home/LogFiles" >> /usr/local/etc/php/conf.d/xdebug.ini diff --git a/7.2.5-nginx-fpm-xdebug/Readme.md b/7.2.5-nginx-fpm-xdebug/Readme.md new file mode 100644 index 00000000..1caf070c --- /dev/null +++ b/7.2.5-nginx-fpm-xdebug/Readme.md @@ -0,0 +1,3 @@ +# Enabling XDebug for PHP containers in Azure App Service + +To use the xdebug version of the PHP container in Azure App Service, set an appsetting called PHP_ZENDEXTENSIONS with the value xdebug. diff --git a/7.2.5-nginx-fpm/Dockerfile b/7.2.5-nginx-fpm/Dockerfile new file mode 100644 index 00000000..968a87e6 --- /dev/null +++ b/7.2.5-nginx-fpm/Dockerfile @@ -0,0 +1,172 @@ +FROM php:7.2.5-fpm-alpine3.7 +LABEL maintainer="Azure App Services Container Images " + +COPY init_container.sh /bin/init_container.sh +COPY hostingstart.html /home/site/wwwroot/hostingstart.html + +RUN chmod 755 /bin/init_container.sh && \ + # set log directories + chmod 777 /var/log && \ + chmod 777 /var/run && \ + chmod 777 /var/lock && \ + rm -rf /var/www/html && \ + rm -rf /var/log/nginx && \ + mkdir -p /home/LogFiles && \ + ln -s /home/site/wwwroot /var/www/html && \ + ln -s /home/LogFiles /var/log/nginx && \ + # Install Nginx + apk update && \ + apk add nginx && \ + # user www-data should already exist + chown -R www-data:www-data /var/lib/nginx && \ + chown -R www-data:www-data /var/www/html + +# Define mountable directories. +VOLUME ["/etc/nginx/sites-enabled", "/etc/nginx/certs", "/etc/nginx/conf.d", "/var/log/nginx"] + +# install libraries and tools we need +# best guesses +RUN apk update && \ + apk add --no-cache openrc \ + libpng-dev \ + libjpeg-turbo-dev \ + postgresql-dev \ + libmcrypt-dev \ + libmcrypt \ + openldap-dev \ + ldb-dev \ + icu-dev \ + gmp-dev \ + imagemagick-dev \ + imap-dev \ + tidyhtml-dev \ + krb5-dev \ + gettext-dev \ + autoconf \ + make \ + g++ \ + libxslt-dev \ + unixodbc-dev \ + openssh-server \ + openssh \ + vim \ + curl \ + wget \ + tcptraceroute && \ + echo "root:Docker!" | chpasswd && \ + echo "cd /home" >> /etc/bash.bashrc && \ + pecl install imagick-beta && \ + pecl install mcrypt-1.0.1 && \ + # install php extensions + docker-php-ext-configure imap --with-kerberos --with-imap-ssl && \ + docker-php-ext-configure pdo_odbc --with-pdo-odbc=unixODBC,/usr && \ + docker-php-ext-configure gd --with-png-dir=/usr --with-jpeg-dir=/usr && \ + docker-php-ext-install gd \ + mysqli \ + opcache \ + pdo \ + pdo_mysql \ + pdo_pgsql \ + pgsql \ + ldap \ + intl \ + gmp \ + zip \ + bcmath \ + mbstring \ + pcntl \ + calendar \ + exif \ + gettext \ + imap \ + tidy \ + shmop \ + soap \ + sockets \ + sysvmsg \ + sysvsem \ + sysvshm \ + pdo_odbc \ + wddx \ + xmlrpc \ + xsl && \ + docker-php-ext-enable imagick && \ + docker-php-ext-enable mcrypt + +# install odbc php ext +RUN apk update && \ + apk add unixodbc-dev + +RUN set -x && \ + docker-php-source extract && \ + cd /usr/src/php/ext/odbc && \ + phpize && \ + sed -ri 's@^ *test +"\$PHP_.*" *= *"no" *&& *PHP_.*=yes *$@#&@g' configure && \ + ./configure --with-unixODBC=shared,/usr && \ + docker-php-ext-install odbc + +# php settings +RUN { \ + echo 'opcache.memory_consumption=128'; \ + echo 'opcache.interned_strings_buffer=8'; \ + echo 'opcache.max_accelerated_files=4000'; \ + echo 'opcache.revalidate_freq=60'; \ + echo 'opcache.fast_shutdown=1'; \ + echo 'opcache.enable_cli=1'; \ + } > /usr/local/etc/php/conf.d/opcache-recommended.ini + +RUN { \ + echo 'error_log=/var/log/nginx/php-error.log'; \ + echo 'display_errors=Off'; \ + echo 'log_errors=On'; \ + echo 'display_startup_errors=Off'; \ + echo 'date.timezone=UTC'; \ + } > /usr/local/etc/php/conf.d/php.ini + +# openrc settings +# https://github.com/dockage/alpine-openrc/blob/master/Dockerfile +RUN sed -i 's/^\(tty\d\:\:\)/#\1/g' /etc/inittab && \ + sed -i \ + # Change subsystem type to "docker" + -e 's/#rc_sys=".*"/rc_sys="docker"/g' \ + # Allow all variables through + -e 's/#rc_env_allow=".*"/rc_env_allow="\*"/g' \ + # Start crashed services + -e 's/#rc_crashed_stop=.*/rc_crashed_stop=NO/g' \ + -e 's/#rc_crashed_start=.*/rc_crashed_start=YES/g' \ + # Define extra dependencies for services + -e 's/#rc_provide=".*"/rc_provide="loopback net"/g' \ + /etc/rc.conf && \ +# Remove unnecessary services + rm -f /etc/init.d/hwdrivers \ + /etc/init.d/hwclock \ + /etc/init.d/hwdrivers \ + /etc/init.d/modules \ + /etc/init.d/modules-load \ + /etc/init.d/modloop && \ + # Can't do cgroups + sed -i 's/cgroup_add_service /# cgroup_add_service /g' /lib/rc/sh/openrc-run.sh && \ + sed -i 's/VSERVER/DOCKER/Ig' /lib/rc/sh/init.sh + +# Expose ports +# http +EXPOSE 8080 +# ssh +EXPOSE 2222 + +COPY www.conf /usr/local/etc/php-fpm.d/www.conf +# replace zz-docker +COPY zz-docker.conf /usr/local/etc/php-fpm.d/zz-docker.conf +COPY nginx.conf /etc/nginx/nginx.conf +COPY sshd_config /etc/ssh/sshd_config +COPY php-fpm.init /etc/init.d/php-fpm +RUN chmod 777 /etc/init.d/php-fpm + +ENV PHP_VERSION 7.2.5 +ENV WEBSITE_ROLE_INSTANCE_ID localRoleInstance +ENV WEBSITE_INSTANCE_ID localInstance +ENV PATH ${PATH}:/home/site/wwwroot + +WORKDIR /home/site/wwwroot + +ENTRYPOINT ["/bin/init_container.sh"] diff --git a/7.2.5-nginx-fpm/hostingstart.html b/7.2.5-nginx-fpm/hostingstart.html new file mode 100644 index 00000000..580cc125 --- /dev/null +++ b/7.2.5-nginx-fpm/hostingstart.html @@ -0,0 +1,38 @@ + + + + + + + +Microsoft Azure App Service - Welcome + + + + + + +
+
+hostingstart-v2-02 +
+
+

Your App Service app has been created

+

Go to your app's + +Quick Start guide in the Azure portal to get started or read our + +deployment documentation. +

+
+
+ + + + \ No newline at end of file diff --git a/7.2.5-nginx-fpm/init_container.sh b/7.2.5-nginx-fpm/init_container.sh new file mode 100644 index 00000000..01c09913 --- /dev/null +++ b/7.2.5-nginx-fpm/init_container.sh @@ -0,0 +1,49 @@ +#!/bin/sh + +cat >/etc/motd < + \/ \/ \/ +A P P S E R V I C E O N L I N U X + +Documentation: http://aka.ms/webapp-linux +PHP quickstart: https://aka.ms/php-qs + +EOL +cat /etc/motd + +# Get environment variables to show up in SSH session +eval $(printenv | sed -n "s/^\([^=]\+\)=\(.*\)$/export \1=\2/p" | sed 's/"/\\\"/g' | sed '/=/s//="/' | sed 's/$/"/' >> /etc/profile) + +# start after openrc +( + sleep 5 + echo "Starting SSH ..." + rc-update add sshd + rc-service sshd restart +) & + +( + sleep 5 + # make the socket + mkdir -p /var/run/php && \ + touch /var/run/php/php-fpm.sock && \ + chown www-data:www-data /var/run/php/php-fpm.sock && \ + chmod 660 /var/run/php/php-fpm.sock + + echo "Starting php-fpm ..." + rc-service php-fpm restart +) & + +( + sleep 5 + echo "Starting Nginx ..." + rc-service nginx restart +) & + +# openrc needs to start as PID 1 +echo "Starting openrc ..." +exec /sbin/init diff --git a/7.2.5-nginx-fpm/nginx.conf b/7.2.5-nginx-fpm/nginx.conf new file mode 100644 index 00000000..1387b45e --- /dev/null +++ b/7.2.5-nginx-fpm/nginx.conf @@ -0,0 +1,51 @@ +user www-data; +worker_processes 1; +daemon on; + +error_log /dev/stdout warn; +pid /var/run/nginx.pid; + +events { + worker_connections 1024; +} + +http { + include /etc/nginx/mime.types; + default_type application/octet-stream; + sendfile on; + access_log /dev/stdout; + keepalive_timeout 3000; + server { + listen 8080; + root /var/www/html; + index index.php index.htm index.html hostingstart.html; + server_name localhost; + client_max_body_size 32m; + error_page 500 502 503 504 /50x.html; + location = /50x.html { + root /var/lib/nginx/html; + } + location ~ [^/]\.php(/|$) { + fastcgi_split_path_info ^(.+?\.php)(/.*)$; + if (!-f $document_root$fastcgi_script_name) { + return 404; + } + + # Mitigate https://httpoxy.org/ vulnerabilities + fastcgi_param HTTP_PROXY ""; + + fastcgi_pass unix:/var/run/php/php-fpm.sock; + # fastcgi_pass 127.0.0.1:9000; + fastcgi_index index.php; + + # include the fastcgi_param setting + include fastcgi_params; + + # SCRIPT_FILENAME parameter is used for PHP FPM determining + # the script name. If it is not set in fastcgi_params file, + # i.e. /etc/nginx/fastcgi_params or in the parent contexts, + # please comment off following line: + fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; + } + } +} diff --git a/7.2.5-nginx-fpm/php-fpm.init b/7.2.5-nginx-fpm/php-fpm.init new file mode 100644 index 00000000..1958ca45 --- /dev/null +++ b/7.2.5-nginx-fpm/php-fpm.init @@ -0,0 +1,156 @@ +#! /bin/sh + +### BEGIN INIT INFO +# Provides: php-fpm +# Required-Start: $remote_fs $network +# Required-Stop: $remote_fs $network +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: starts php-fpm +# Description: starts the PHP FastCGI Process Manager daemon +### END INIT INFO + +prefix=@prefix@ +exec_prefix=@exec_prefix@ + +php_fpm_BIN=/usr/local/sbin/php-fpm +php_fpm_CONF=/usr/local/etc/php-fpm.conf +php_fpm_PID=/var/run/php-fpm.pid + + +php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID" + + +wait_for_pid () { + try=0 + + while test $try -lt 35 ; do + + case "$1" in + 'created') + if [ -f "$2" ] ; then + try='' + break + fi + ;; + + 'removed') + if [ ! -f "$2" ] ; then + try='' + break + fi + ;; + esac + + echo -n . + try=`expr $try + 1` + sleep 1 + + done + +} + +case "$1" in + start) + echo -n "Starting php-fpm " + + $php_fpm_BIN --daemonize $php_opts + + if [ "$?" != 0 ] ; then + echo " failed" + exit 1 + fi + + wait_for_pid created $php_fpm_PID + + if [ -n "$try" ] ; then + echo " failed" + exit 1 + else + echo " done" + fi + ;; + + stop) + echo -n "Gracefully shutting down php-fpm " + + if [ ! -r $php_fpm_PID ] ; then + echo "warning, no pid file found - php-fpm is not running ?" + exit 1 + fi + + kill -QUIT `cat $php_fpm_PID` + + wait_for_pid removed $php_fpm_PID + + if [ -n "$try" ] ; then + echo " failed. Use force-quit" + exit 1 + else + echo " done" + fi + ;; + + status) + if [ ! -r $php_fpm_PID ] ; then + echo "php-fpm is stopped" + exit 0 + fi + + PID=`cat $php_fpm_PID` + if ps -p $PID | grep -q $PID; then + echo "php-fpm (pid $PID) is running..." + else + echo "php-fpm dead but pid file exists" + fi + ;; + + force-quit) + echo -n "Terminating php-fpm " + + if [ ! -r $php_fpm_PID ] ; then + echo "warning, no pid file found - php-fpm is not running ?" + exit 1 + fi + + kill -TERM `cat $php_fpm_PID` + + wait_for_pid removed $php_fpm_PID + + if [ -n "$try" ] ; then + echo " failed" + exit 1 + else + echo " done" + fi + ;; + + restart) + $0 stop + $0 start + ;; + + reload) + + echo -n "Reload service php-fpm " + + if [ ! -r $php_fpm_PID ] ; then + echo "warning, no pid file found - php-fpm is not running ?" + exit 1 + fi + + kill -USR2 `cat $php_fpm_PID` + + echo " done" + ;; + + configtest) + $php_fpm_BIN -t + ;; + + *) + echo "Usage: $0 {start|stop|force-quit|restart|reload|status|configtest}" + exit 1 + ;; + +esac \ No newline at end of file diff --git a/7.2.5-nginx-fpm/sshd_config b/7.2.5-nginx-fpm/sshd_config new file mode 100644 index 00000000..a3690f23 --- /dev/null +++ b/7.2.5-nginx-fpm/sshd_config @@ -0,0 +1,15 @@ +# This is ssh server systemwide configuration file. +# +# /etc/sshd_config + +Port 2222 +ListenAddress 0.0.0.0 +LoginGraceTime 180 +X11Forwarding yes +Ciphers aes128-cbc,3des-cbc,aes256-cbc +MACs hmac-sha1,hmac-sha1-96 +StrictModes yes +SyslogFacility DAEMON +PasswordAuthentication yes +PermitEmptyPasswords no +PermitRootLogin yes diff --git a/7.2.5-nginx-fpm/www.conf b/7.2.5-nginx-fpm/www.conf new file mode 100644 index 00000000..7992c6ee --- /dev/null +++ b/7.2.5-nginx-fpm/www.conf @@ -0,0 +1,425 @@ +; Start a new pool named 'www'. +; the variable $pool can be used in any directive and will be replaced by the +; pool name ('www' here) +[www] + +; Per pool prefix +; It only applies on the following directives: +; - 'access.log' +; - 'slowlog' +; - 'listen' (unixsocket) +; - 'chroot' +; - 'chdir' +; - 'php_values' +; - 'php_admin_values' +; When not set, the global prefix (or NONE) applies instead. +; Note: This directive can also be relative to the global prefix. +; Default Value: none +;prefix = /path/to/pools/$pool + +; Unix user/group of processes +; Note: The user is mandatory. If the group is not set, the default user's group +; will be used. +user = www-data +group = www-data + +; The address on which to accept FastCGI requests. +; Valid syntaxes are: +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on +; a specific port; +; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on +; a specific port; +; 'port' - to listen on a TCP socket to all addresses +; (IPv6 and IPv4-mapped) on a specific port; +; '/path/to/unix/socket' - to listen on a unix socket. +; Note: This value is mandatory. +listen = /var/run/php/php-fpm.sock +; listen = 127.0.0.1:9000 + +; Set listen(2) backlog. +; Default Value: 511 (-1 on FreeBSD and OpenBSD) +;listen.backlog = 511 + +; Set permissions for unix socket, if one is used. In Linux, read/write +; permissions must be set in order to allow connections from a web server. Many +; BSD-derived systems allow connections regardless of permissions. +; Default Values: user and group are set as the running user +; mode is set to 0660 +listen.owner = www-data +listen.group = www-data +listen.mode = 0660 + +; When POSIX Access Control Lists are supported you can set them using +; these options, value is a comma separated list of user/group names. +; When set, listen.owner and listen.group are ignored +;listen.acl_users = +;listen.acl_groups = + +; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. +; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original +; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address +; must be separated by a comma. If this value is left blank, connections will be +; accepted from any ip address. +; Default Value: any +;listen.allowed_clients = 127.0.0.1 + +; Specify the nice(2) priority to apply to the pool processes (only if set) +; The value can vary from -19 (highest priority) to 20 (lower priority) +; Note: - It will only work if the FPM master process is launched as root +; - The pool processes will inherit the master process priority +; unless it specified otherwise +; Default Value: no set +; process.priority = -19 + +; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user +; or group is differrent than the master process user. It allows to create process +; core dump and ptrace the process for the pool user. +; Default Value: no +; process.dumpable = yes + +; Choose how the process manager will control the number of child processes. +; Possible Values: +; static - a fixed number (pm.max_children) of child processes; +; dynamic - the number of child processes are set dynamically based on the +; following directives. With this process management, there will be +; always at least 1 children. +; pm.max_children - the maximum number of children that can +; be alive at the same time. +; pm.start_servers - the number of children created on startup. +; pm.min_spare_servers - the minimum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is less than this +; number then some children will be created. +; pm.max_spare_servers - the maximum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is greater than this +; number then some children will be killed. +; ondemand - no children are created at startup. Children will be forked when +; new requests will connect. The following parameter are used: +; pm.max_children - the maximum number of children that +; can be alive at the same time. +; pm.process_idle_timeout - The number of seconds after which +; an idle process will be killed. +; Note: This value is mandatory. +pm = dynamic + +; The number of child processes to be created when pm is set to 'static' and the +; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. +; This value sets the limit on the number of simultaneous requests that will be +; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. +; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP +; CGI. The below defaults are based on a server without much resources. Don't +; forget to tweak pm.* to fit your needs. +; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' +; Note: This value is mandatory. +pm.max_children = 50 + +; The number of child processes created on startup. +; Note: Used only when pm is set to 'dynamic' +; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 +pm.start_servers = 5 + +; The desired minimum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.min_spare_servers = 5 + +; The desired maximum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.max_spare_servers = 6 + +; The number of seconds after which an idle process will be killed. +; Note: Used only when pm is set to 'ondemand' +; Default Value: 10s +;pm.process_idle_timeout = 10s; + +; The number of requests each child process should execute before respawning. +; This can be useful to work around memory leaks in 3rd party libraries. For +; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. +; Default Value: 0 +;pm.max_requests = 500 + +; The URI to view the FPM status page. If this value is not set, no URI will be +; recognized as a status page. It shows the following informations: +; pool - the name of the pool; +; process manager - static, dynamic or ondemand; +; start time - the date and time FPM has started; +; start since - number of seconds since FPM has started; +; accepted conn - the number of request accepted by the pool; +; listen queue - the number of request in the queue of pending +; connections (see backlog in listen(2)); +; max listen queue - the maximum number of requests in the queue +; of pending connections since FPM has started; +; listen queue len - the size of the socket queue of pending connections; +; idle processes - the number of idle processes; +; active processes - the number of active processes; +; total processes - the number of idle + active processes; +; max active processes - the maximum number of active processes since FPM +; has started; +; max children reached - number of times, the process limit has been reached, +; when pm tries to start more children (works only for +; pm 'dynamic' and 'ondemand'); +; Value are updated in real time. +; Example output: +; pool: www +; process manager: static +; start time: 01/Jul/2011:17:53:49 +0200 +; start since: 62636 +; accepted conn: 190460 +; listen queue: 0 +; max listen queue: 1 +; listen queue len: 42 +; idle processes: 4 +; active processes: 11 +; total processes: 15 +; max active processes: 12 +; max children reached: 0 +; +; By default the status page output is formatted as text/plain. Passing either +; 'html', 'xml' or 'json' in the query string will return the corresponding +; output syntax. Example: +; http://www.foo.bar/status +; http://www.foo.bar/status?json +; http://www.foo.bar/status?html +; http://www.foo.bar/status?xml +; +; By default the status page only outputs short status. Passing 'full' in the +; query string will also return status for each pool process. +; Example: +; http://www.foo.bar/status?full +; http://www.foo.bar/status?json&full +; http://www.foo.bar/status?html&full +; http://www.foo.bar/status?xml&full +; The Full status returns for each process: +; pid - the PID of the process; +; state - the state of the process (Idle, Running, ...); +; start time - the date and time the process has started; +; start since - the number of seconds since the process has started; +; requests - the number of requests the process has served; +; request duration - the duration in µs of the requests; +; request method - the request method (GET, POST, ...); +; request URI - the request URI with the query string; +; content length - the content length of the request (only with POST); +; user - the user (PHP_AUTH_USER) (or '-' if not set); +; script - the main script called (or '-' if not set); +; last request cpu - the %cpu the last request consumed +; it's always 0 if the process is not in Idle state +; because CPU calculation is done when the request +; processing has terminated; +; last request memory - the max amount of memory the last request consumed +; it's always 0 if the process is not in Idle state +; because memory calculation is done when the request +; processing has terminated; +; If the process is in Idle state, then informations are related to the +; last request the process has served. Otherwise informations are related to +; the current request being served. +; Example output: +; ************************ +; pid: 31330 +; state: Running +; start time: 01/Jul/2011:17:53:49 +0200 +; start since: 63087 +; requests: 12808 +; request duration: 1250261 +; request method: GET +; request URI: /test_mem.php?N=10000 +; content length: 0 +; user: - +; script: /home/fat/web/docs/php/test_mem.php +; last request cpu: 0.00 +; last request memory: 0 +; +; Note: There is a real-time FPM status monitoring sample web page available +; It's available in: /usr/local/share/php/fpm/status.html +; +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;pm.status_path = /status + +; The ping URI to call the monitoring page of FPM. If this value is not set, no +; URI will be recognized as a ping page. This could be used to test from outside +; that FPM is alive and responding, or to +; - create a graph of FPM availability (rrd or such); +; - remove a server from a group if it is not responding (load balancing); +; - trigger alerts for the operating team (24/7). +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;ping.path = /ping + +; This directive may be used to customize the response of a ping request. The +; response is formatted as text/plain with a 200 response code. +; Default Value: pong +;ping.response = pong + +; The access log file +; Default: not set +;access.log = log/$pool.access.log + +; The access log format. +; The following syntax is allowed +; %%: the '%' character +; %C: %CPU used by the request +; it can accept the following format: +; - %{user}C for user CPU only +; - %{system}C for system CPU only +; - %{total}C for user + system CPU (default) +; %d: time taken to serve the request +; it can accept the following format: +; - %{seconds}d (default) +; - %{miliseconds}d +; - %{mili}d +; - %{microseconds}d +; - %{micro}d +; %e: an environment variable (same as $_ENV or $_SERVER) +; it must be associated with embraces to specify the name of the env +; variable. Some exemples: +; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e +; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e +; %f: script filename +; %l: content-length of the request (for POST request only) +; %m: request method +; %M: peak of memory allocated by PHP +; it can accept the following format: +; - %{bytes}M (default) +; - %{kilobytes}M +; - %{kilo}M +; - %{megabytes}M +; - %{mega}M +; %n: pool name +; %o: output header +; it must be associated with embraces to specify the name of the header: +; - %{Content-Type}o +; - %{X-Powered-By}o +; - %{Transfert-Encoding}o +; - .... +; %p: PID of the child that serviced the request +; %P: PID of the parent of the child that serviced the request +; %q: the query string +; %Q: the '?' character if query string exists +; %r: the request URI (without the query string, see %q and %Q) +; %R: remote IP address +; %s: status (response code) +; %t: server time the request was received +; it can accept a strftime(3) format: +; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t +; %T: time the log has been written (the request has finished) +; it can accept a strftime(3) format: +; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t +; %u: remote user +; +; Default: "%R - %u %t \"%m %r\" %s" +;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" + +; The log file for slow requests +; Default Value: not set +; Note: slowlog is mandatory if request_slowlog_timeout is set +;slowlog = log/$pool.log.slow + +; The timeout for serving a single request after which a PHP backtrace will be +; dumped to the 'slowlog' file. A value of '0s' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_slowlog_timeout = 0 + +; Depth of slow log stack trace. +; Default Value: 20 +;request_slowlog_trace_depth = 20 + +; The timeout for serving a single request after which the worker process will +; be killed. This option should be used when the 'max_execution_time' ini option +; does not stop script execution for some reason. A value of '0' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_terminate_timeout = 0 + +; Set open file descriptor rlimit. +; Default Value: system defined value +;rlimit_files = 1024 + +; Set max core size rlimit. +; Possible Values: 'unlimited' or an integer greater or equal to 0 +; Default Value: system defined value +;rlimit_core = 0 + +; Chroot to this directory at the start. This value must be defined as an +; absolute path. When this value is not set, chroot is not used. +; Note: you can prefix with '$prefix' to chroot to the pool prefix or one +; of its subdirectories. If the pool prefix is not set, the global prefix +; will be used instead. +; Note: chrooting is a great security feature and should be used whenever +; possible. However, all PHP paths will be relative to the chroot +; (error_log, sessions.save_path, ...). +; Default Value: not set +;chroot = + +; Chdir to this directory at the start. +; Note: relative path can be used. +; Default Value: current directory or / when chroot +;chdir = /var/www + +; Redirect worker stdout and stderr into main error log. If not set, stdout and +; stderr will be redirected to /dev/null according to FastCGI specs. +; Note: on highloaded environement, this can cause some delay in the page +; process time (several ms). +; Default Value: no +;catch_workers_output = yes + +; Clear environment in FPM workers +; Prevents arbitrary environment variables from reaching FPM worker processes +; by clearing the environment in workers before env vars specified in this +; pool configuration are added. +; Setting to "no" will make all environment variables available to PHP code +; via getenv(), $_ENV and $_SERVER. +; Default Value: yes +;clear_env = no + +; Limits the extensions of the main script FPM will allow to parse. This can +; prevent configuration mistakes on the web server side. You should only limit +; FPM to .php extensions to prevent malicious users to use other extensions to +; execute php code. +; Note: set an empty value to allow all extensions. +; Default Value: .php +;security.limit_extensions = .php .php3 .php4 .php5 .php7 + +; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from +; the current environment. +; Default Value: clean env +;env[HOSTNAME] = $HOSTNAME +;env[PATH] = /usr/local/bin:/usr/bin:/bin +;env[TMP] = /tmp +;env[TMPDIR] = /tmp +;env[TEMP] = /tmp + +; Additional php.ini defines, specific to this pool of workers. These settings +; overwrite the values previously defined in the php.ini. The directives are the +; same as the PHP SAPI: +; php_value/php_flag - you can set classic ini defines which can +; be overwritten from PHP call 'ini_set'. +; php_admin_value/php_admin_flag - these directives won't be overwritten by +; PHP call 'ini_set' +; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. + +; Defining 'extension' will load the corresponding shared extension from +; extension_dir. Defining 'disable_functions' or 'disable_classes' will not +; overwrite previously defined php.ini values, but will append the new value +; instead. + +; Note: path INI options can be relative and will be expanded with the prefix +; (pool, global or /usr/local) + +; Default Value: nothing is defined by default except the values in php.ini and +; specified at startup with the -d argument +;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com +;php_flag[display_errors] = off +;php_admin_value[error_log] = /var/log/fpm-php.www.log +;php_admin_flag[log_errors] = on +;php_admin_value[memory_limit] = 32M diff --git a/7.2.5-nginx-fpm/zz-docker.conf b/7.2.5-nginx-fpm/zz-docker.conf new file mode 100644 index 00000000..909a7b1a --- /dev/null +++ b/7.2.5-nginx-fpm/zz-docker.conf @@ -0,0 +1,6 @@ +[global] +daemonize = yes + +; overwriten by www.conf +; [www] +; listen = 9000 diff --git a/build.sh b/build.sh index 2848245f..ccfe27ab 100755 --- a/build.sh +++ b/build.sh @@ -13,11 +13,13 @@ docker login -u "$2" -p "$3" docker build -q -t "$1"/php:5.6.36-apache_"$buildnumber" 5.6.36-apache docker build -q -t "$1"/php:7.0.30-apache_"$buildnumber" 7.0.30-apache docker build -q -t "$1"/php:7.2.5-apache_"$buildnumber" -t "$1"/php:latest_"$buildnumber" 7.2.5-apache +docker build -q -t "$1"/php:7.2.5-nginx-fpm_"$buildnumber" 7.2.5-nginx-fpm docker tag "$1"/php:latest_"$buildnumber" "$1"/php:latest docker push "$1"/php:5.6.36-apache_"$buildnumber" docker push "$1"/php:7.0.30-apache_"$buildnumber" docker push "$1"/php:7.2.5-apache_"$buildnumber" +docker push "$1"/php:7.2.5-nginx-fpm_"$buildnumber" docker push "$1"/php:latest_"$buildnumber" docker push "$1"/php:latest @@ -26,15 +28,23 @@ docker push "$1"/php:latest sed -e s/reponame/"$1"/g -e s/buildnumber/"$buildnumber"/g 5.6.36-apache-xdebug/Dockerfile.template > 5.6.36-apache-xdebug/Dockerfile sed -e s/reponame/"$1"/g -e s/buildnumber/"$buildnumber"/g 7.0.30-apache-xdebug/Dockerfile.template > 7.0.30-apache-xdebug/Dockerfile sed -e s/reponame/"$1"/g -e s/buildnumber/"$buildnumber"/g 7.2.5-apache-xdebug/Dockerfile.template > 7.2.5-apache-xdebug/Dockerfile +sed -e s/reponame/"$1"/g -e s/buildnumber/"$buildnumber"/g 7.2.5-nginx-fpm-xdebug/Dockerfile.template > 7.2.5-nginx-fpm-xdebug/Dockerfile # build xdebug images docker build -q -t "$1"/php:5.6.36-apache-xdebug_"$buildnumber" 5.6.36-apache-xdebug docker build -q -t "$1"/php:7.0.30-apache-xdebug_"$buildnumber" 7.0.30-apache-xdebug docker build -q -t "$1"/php:7.2.5-apache-xdebug_"$buildnumber" -t "$1"/php:latest-xdebug_"$buildnumber" 7.2.5-apache-xdebug +docker build -q -t "$1"/php:7.2.5-nginx-fpm-xdebug_"$buildnumber" 7.2.5-nginx-fpm-xdebug docker push "$1"/php:5.6.36-apache-xdebug_"$buildnumber" docker push "$1"/php:7.0.30-apache-xdebug_"$buildnumber" docker push "$1"/php:7.2.5-apache-xdebug_"$buildnumber" +docker push "$1"/php:7.2.5-nginx-fpm-xdebug_"$buildnumber" docker push "$1"/php:latest-xdebug_"$buildnumber" docker logout + +rm 5.6.36-apache-xdebug/Dockerfile +rm 7.0.30-apache-xdebug/Dockerfile +rm 7.2.5-apache-xdebug/Dockerfile +rm 7.2.5-nginx-fpm-xdebug/Dockerfile