Skip to content

Latest commit

 

History

History
117 lines (85 loc) · 4.43 KB

yocto-development.md

File metadata and controls

117 lines (85 loc) · 4.43 KB

Yocto in OpenBMC

The Yocto Project is an open source collaboration project that provides templates, tools and methods to help you create custom Linux-based systems for embedded products regardless of the hardware architecture.

OpenBMC uses the Yocto tools to manage configuration and creation of BMC images.

Developing with Yocto

There are two main use-cases for Yocto in OpenBMC:

  1. Building from master or existing tags
  2. Developing changes for submission to master

The first is the easy case, and largely involves picking the system configuration to build before invoking bitbake. Examples for Palmetto and Zaius are in the cheatsheet.

The second case can be helped with Yocto's devtool. After running . openbmc-env, a tool called devtool will be in your path, and can be applied in several ways.

If you have an existing source tree you'd like to integrate, running devtool modify -n ${PACKAGE} ${SRCTREE} first creates a new Yocto layer in your build directory where devtool stores recipe modifications. It then constructs a .bbappend for the package recipe and uses the externalsource class to replace the download, fetch, and patch steps with no-ops. The result is that when you build the package, it will use the local source directory as is. Keep in mind that the package recipe may not perform a clean and depending on what you are doing, you may need to run ${PACKAGE} build system's clean command in ${SRCTREE} to clear any built objects. Also if you change the source, you may need to run bitbake -c cleansstate ${PACKAGE} to clear BitBake's caches.

Alternatively, if you don't already have a local source tree but would still like to modify the package, invoking devtool modify ${PACKAGE} will handle the fetch, unpack and patch phases for you and drop a source tree into your default workspace location.

When you are all done, run devtool reset ${PACKAGE} to remove the .bbappend from the devtool Yocto layer.

Further information on devtool can be found in the Yocto Mega Manual.

Adding a file to your image

There are a lot of examples of working with BitBake out there. The recipe example from OpenEmbedded is a great one and the premise of this OpenBMC tailored section.

So you wrote some code. You've been scp'ing the compiled binary on to the OpenBMC system for a while and you know there is a better way. Have it built as part of your flash image.

Run the devtool command to add your repo to the workspace. In my example I have a repo out on GitHub that contains my code.

devtool add welcome https://github.com/causten/hello.git

Now edit the bb file it created for you. You can just use vim but devtool can also edit the recipe devtool edit-recipe welcome without having to type the complete path.

Add/Modify these lines.

do_install () {
        install -m 0755 -d ${D}${bindir} ${D}${datadir}/welcome
        install -m 0644 ${S}/hello ${D}${bindir}
        install -m 0644 ${S}/README.md ${D}${datadir}/welcome/
}

The install directives create directories and then copies the files into them. Now BitBake will pick them up from the traditional /usr/bin and /usr/shared/doc/hello/README.md.

The Final Step is to tell BitBake that you need the welcome recipe

vim conf/local.conf
IMAGE_INSTALL_append = " welcome"

That's it, recompile and boot your system, the binary hello will be in /usr/bin and the README.md will be in /usr/shared/doc/welcome.

Know what your image has

Sure you could flash and boot your system to see if your file made it, but there is a faster way. The rootfs directory down in the depths of the build/tmp path is the staging area where files are placed to be packaged.

In my example to check if README.md was going to be added just do...

ls build/tmp/work/${MACHINE}-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/usr/share/welcome/README.md

NXP wrote a few examples of useful commands with BitBake that find the file too

bitbake -g obmc-phosphor-image && cat pn-depends.dot |grep welcome