docs.md

LibUV in Lua

The luv project provides access to the multi-platform support library libuv in Lua code. It was primarily developed for the luvit project as the built-in uv module, but can be used in other Lua environments.

More information about the core libuv library can be found at the original libuv documentation page.

TCP Echo Server Example

Here is a small example showing a TCP echo server:

local uv = require("luv") -- "luv" when stand-alone, "uv" in luvi apps

local server = uv.new_tcp()
server:bind("127.0.0.1", 1337)
server:listen(128, function (err)
  assert(not err, err)
  local client = uv.new_tcp()
  server:accept(client)
  client:read_start(function (err, chunk)
    assert(not err, err)
    if chunk then
      client:write(chunk)
    else
      client:shutdown()
      client:close()
    end
  end)
end)
print("TCP server listening at 127.0.0.1 port 1337")
uv.run() -- an explicit run call is necessary outside of luvit

Module Layout

The luv library contains a single Lua module referred to hereafter as uv for simplicity. This module consists mostly of functions with names corresponding to their original libuv versions. For example, the libuv function uv_tcp_bind has a luv version at uv.tcp_bind. Currently, only two non-function fields exists: uv.constants and uv.errno, which are tables.

Functions vs Methods

In addition to having simple functions, luv provides an optional method-style API. For example, uv.tcp_bind(server, host, port) can alternatively be called as server:bind(host, port). Note that the first argument server becomes the object and tcp_ is removed from the function name. Method forms are documented below where they exist.

Synchronous vs Asynchronous Functions

Functions that accept a callback are asynchronous. These functions may immediately return results to the caller to indicate their initial status, but their final execution is deferred until at least the next libuv loop iteration. After completion, their callbacks are executed with any results passed to it.

Functions that do not accept a callback are synchronous. These functions immediately return their results to the caller.

Some (generally FS and DNS) functions can behave either synchronously or asynchronously. If a callback is provided to these functions, they behave asynchronously; if no callback is provided, they behave synchronously.

Pseudo-Types

Some unique types are defined. These are not actual types in Lua, but they are used here to facilitate documenting consistent behavior:

• fail: an assertable nil, string, string tuple (see Error Handling)
• callable: a function; or a table or userdata with a __call metamethod
• buffer: a string or a sequential table of strings
• threadargs: variable arguments (...) of type nil, boolean, number, string, or userdata, numbers of argument limited to 9.

Contents

This documentation is mostly a retelling of the libuv API documentation within the context of luv's Lua API. Low-level implementation details and unexposed C functions and types are not documented here except for when they are relevant to behavior seen in the Lua module.

• Constants
• Error Handling
• Version Checking
• uv_loop_t — Event loop
• uv_req_t — Base request
• uv_handle_t — Base handle
  • uv_timer_t — Timer handle
  • uv_prepare_t — Prepare handle
  • uv_check_t — Check handle
  • uv_idle_t — Idle handle
  • uv_async_t — Async handle
  • uv_poll_t — Poll handle
  • uv_signal_t — Signal handle
  • uv_process_t — Process handle
  • uv_stream_t — Stream handle
    • uv_tcp_t — TCP handle
    • uv_pipe_t — Pipe handle
    • uv_tty_t — TTY handle
  • uv_udp_t — UDP handle
  • uv_fs_event_t — FS Event handle
  • uv_fs_poll_t — FS Poll handle
• File system operations
• Thread pool work scheduling
• DNS utility functions
• Threading and synchronization utilities
• Miscellaneous utilities
• Metrics operations

Constants

As a Lua library, luv supports and encourages the use of lowercase strings to represent options. For example:

-- signal start with string input
uv.signal_start("sigterm", function(signame)
  print(signame) -- string output: "sigterm"
end)

However, luv also superficially exposes libuv constants in a Lua table at uv.constants where its keys are uppercase constant names and their associated values are integers defined internally by libuv. The values from this table may be supported as function arguments, but their use may not change the output type. For example:

-- signal start with integer input
uv.signal_start(uv.constants.SIGTERM, function(signame)
  print(signame) -- string output: "sigterm"
end)

The uppercase constants defined in uv.constants that have associated lowercase option strings are listed below.

Address Families

• AF_UNIX: "unix"
• AF_INET: "inet"
• AF_INET6: "inet6"
• AF_IPX: "ipx"
• AF_NETLINK: "netlink"
• AF_X25: "x25"
• AF_AX25: "as25"
• AF_ATMPVC: "atmpvc"
• AF_APPLETALK: "appletalk"
• AF_PACKET: "packet"

Signals

• SIGHUP: "sighup"
• SIGINT: "sigint"
• SIGQUIT: "sigquit"
• SIGILL: "sigill"
• SIGTRAP: "sigtrap"
• SIGABRT: "sigabrt"
• SIGIOT: "sigiot"
• SIGBUS: "sigbus"
• SIGFPE: "sigfpe"
• SIGKILL: "sigkill"
• SIGUSR1: "sigusr1"
• SIGSEGV: "sigsegv"
• SIGUSR2: "sigusr2"
• SIGPIPE: "sigpipe"
• SIGALRM: "sigalrm"
• SIGTERM: "sigterm"
• SIGCHLD: "sigchld"
• SIGSTKFLT: "sigstkflt"
• SIGCONT: "sigcont"
• SIGSTOP: "sigstop"
• SIGTSTP: "sigtstp"
• SIGBREAK: "sigbreak"
• SIGTTIN: "sigttin"
• SIGTTOU: "sigttou"
• SIGURG: "sigurg"
• SIGXCPU: "sigxcpu"
• SIGXFSZ: "sigxfsz"
• SIGVTALRM: "sigvtalrm"
• SIGPROF: "sigprof"
• SIGWINCH: "sigwinch"
• SIGIO: "sigio"
• SIGPOLL: "sigpoll"
• SIGLOST: "siglost"
• SIGPWR: "sigpwr"
• SIGSYS: "sigsys"

Socket Types

• SOCK_STREAM: "stream"
• SOCK_DGRAM: "dgram"
• SOCK_SEQPACKET: "seqpacket"
• SOCK_RAW: "raw"
• SOCK_RDM: "rdm"

TTY Modes

• TTY_MODE_NORMAL: "normal"
• TTY_MODE_RAW: "raw"
• TTY_MODE_IO: "io"
• TTY_MODE_RAW_VT: "raw_vt"

FS Modification Times

• FS_UTIME_NOW: "now"
• FS_UTIME_OMIT: "omit"

Error Handling

In libuv, errors are represented by negative numbered constants. While these constants are made available in the uv.errno table, they are not returned by luv functions and the libuv functions used to handle them are not exposed. Instead, if an internal error is encountered, the failing luv function will return to the caller an assertable nil, err, name tuple:

• nil idiomatically indicates failure
• err is a string with the format {name}: {message}
  • {name} is the error name provided internally by uv_err_name
  • {message} is a human-readable message provided internally by uv_strerror
• name is the same string used to construct err

This tuple is referred to below as the fail pseudo-type.

When a function is called successfully, it will return either a value that is relevant to the operation of the function, or the integer 0 to indicate success, or sometimes nothing at all. These cases are documented below.

Below is a list of known error names and error strings. See libuv's error constants page for an original source.

• E2BIG: argument list too long.
• EACCES: permission denied.
• EADDRINUSE: address already in use.
• EADDRNOTAVAIL: address not available.
• EAFNOSUPPORT: address family not supported.
• EAGAIN: resource temporarily unavailable.
• EAI_ADDRFAMILY: address family not supported.
• EAI_AGAIN: temporary failure.
• EAI_BADFLAGS: bad ai_flags value.
• EAI_BADHINTS: invalid value for hints.
• EAI_CANCELED: request canceled.
• EAI_FAIL: permanent failure.
• EAI_FAMILY: ai_family not supported.
• EAI_MEMORY: out of memory.
• EAI_NODATA: no address.
• EAI_NONAME: unknown node or service.
• EAI_OVERFLOW: argument buffer overflow.
• EAI_PROTOCOL: resolved protocol is unknown.
• EAI_SERVICE: service not available for socket type.
• EAI_SOCKTYPE: socket type not supported.
• EALREADY: connection already in progress.
• EBADF: bad file descriptor.
• EBUSY: resource busy or locked.
• ECANCELED: operation canceled.
• ECHARSET: invalid Unicode character.
• ECONNABORTED: software caused connection abort.
• ECONNREFUSED: connection refused.
• ECONNRESET: connection reset by peer.
• EDESTADDRREQ: destination address required.
• EEXIST: file already exists.
• EFAULT: bad address in system call argument.
• EFBIG: file too large.
• EHOSTUNREACH: host is unreachable.
• EINTR: interrupted system call.
• EINVAL: invalid argument.
• EIO: i/o error.
• EISCONN: socket is already connected.
• EISDIR: illegal operation on a directory.
• ELOOP: too many symbolic links encountered.
• EMFILE: too many open files.
• EMSGSIZE: message too long.
• ENAMETOOLONG: name too long.
• ENETDOWN: network is down.
• ENETUNREACH: network is unreachable.
• ENFILE: file table overflow.
• ENOBUFS: no buffer space available.
• ENODEV: no such device.
• ENOENT: no such file or directory.
• ENOMEM: not enough memory.
• ENONET: machine is not on the network.
• ENOPROTOOPT: protocol not available.
• ENOSPC: no space left on device.
• ENOSYS: function not implemented.
• ENOTCONN: socket is not connected.
• ENOTDIR: not a directory.
• ENOTEMPTY: directory not empty.
• ENOTSOCK: socket operation on non-socket.
• ENOTSUP: operation not supported on socket.
• EOVERFLOW: value too large for defined data type.
• EPERM: operation not permitted.
• EPIPE: broken pipe.
• EPROTO: protocol error.
• EPROTONOSUPPORT: protocol not supported.
• EPROTOTYPE: protocol wrong type for socket.
• ERANGE: result too large.
• EROFS: read-only file system.
• ESHUTDOWN: cannot send after transport endpoint shutdown.
• ESPIPE: invalid seek.
• ESRCH: no such process.
• ETIMEDOUT: connection timed out.
• ETXTBSY: text file is busy.
• EXDEV: cross-device link not permitted.
• UNKNOWN: unknown error.
• EOF: end of file.
• ENXIO: no such device or address.
• EMLINK: too many links.
• ENOTTY: inappropriate ioctl for device.
• EFTYPE: inappropriate file type or format.
• EILSEQ: illegal byte sequence.
• ESOCKTNOSUPPORT: socket type not supported.

Version Checking

uv.version()

Returns the libuv version packed into a single integer. 8 bits are used for each component, with the patch number stored in the 8 least significant bits. For example, this would be 0x010203 in libuv 1.2.3.

Returns: integer

uv.version_string()

Returns the libuv version number as a string. For example, this would be "1.2.3" in libuv 1.2.3. For non-release versions, the version suffix is included.

Returns: string

uv_loop_t — Event loop

The event loop is the central part of libuv's functionality. It takes care of polling for I/O and scheduling callbacks to be run based on different sources of events.

In luv, there is an implicit uv loop for every Lua state that loads the library. You can use this library in an multi-threaded environment as long as each thread has it's own Lua state with its corresponding own uv loop. This loop is not directly exposed to users in the Lua module.

uv.loop_close()

Closes all internal loop resources. In normal execution, the loop will automatically be closed when it is garbage collected by Lua, so it is not necessary to explicitly call loop_close(). Call this function only after the loop has finished executing and all open handles and requests have been closed, or it will return EBUSY.

Returns: 0 or fail

uv.run([mode])

Parameters:

• mode: string or nil (default: "default")

This function runs the event loop. It will act differently depending on the specified mode:

• "default": Runs the event loop until there are no more active and referenced handles or requests. Returns true if uv.stop() was called and there are still active handles or requests. Returns false in all other cases.

• "once": Poll for I/O once. Note that this function blocks if there are no pending callbacks. Returns false when done (no active handles or requests left), or true if more callbacks are expected (meaning you should run the event loop again sometime in the future).

• "nowait": Poll for I/O once but don't block if there are no pending callbacks. Returns false if done (no active handles or requests left), or true if more callbacks are expected (meaning you should run the event loop again sometime in the future).

Returns: boolean or fail

Note: Luvit will implicitly call uv.run() after loading user code, but if you use the luv bindings directly, you need to call this after registering your initial set of event callbacks to start the event loop.

uv.loop_configure(option, ...)

Parameters:

• option: string
• ...: any depends on option

Set additional loop options. You should normally call this before the first call to uv_run() unless mentioned otherwise.

Supported options:

• "block_signal": Block a signal when polling for new events. The second argument to loop_configure() is the signal name (as a lowercase string) or the signal number. This operation is currently only implemented for "sigprof" signals, to suppress unnecessary wakeups when using a sampling profiler. Requesting other signals will fail with EINVAL.
• "metrics_idle_time": Accumulate the amount of idle time the event loop spends in the event provider. This option is necessary to use metrics_idle_time().

An example of a valid call to this function is:

uv.loop_configure("block_signal", "sigprof")

Returns: 0 or fail

Note: Be prepared to handle the ENOSYS error; it means the loop option is not supported by the platform.

uv.loop_mode()

If the loop is running, returns a string indicating the mode in use. If the loop is not running, nil is returned instead.

Returns: string or nil

uv.loop_alive()

Returns true if there are referenced active handles, active requests, or closing handles in the loop; otherwise, false.

Returns: boolean or fail

uv.stop()

Stop the event loop, causing uv.run() to end as soon as possible. This will happen not sooner than the next loop iteration. If this function was called before blocking for I/O, the loop won't block for I/O on this iteration.

Returns: Nothing.

uv.backend_fd()

Get backend file descriptor. Only kqueue, epoll, and event ports are supported.

This can be used in conjunction with uv.run("nowait") to poll in one thread and run the event loop's callbacks in another

Returns: integer or nil

Note: Embedding a kqueue fd in another kqueue pollset doesn't work on all platforms. It's not an error to add the fd but it never generates events.

uv.backend_timeout()

Get the poll timeout. The return value is in milliseconds, or -1 for no timeout.

Returns: integer

uv.now()

Returns the current timestamp in milliseconds. The timestamp is cached at the start of the event loop tick, see uv.update_time() for details and rationale.

The timestamp increases monotonically from some arbitrary point in time. Don't make assumptions about the starting point, you will only get disappointed.

Returns: integer

Note: Use uv.hrtime() if you need sub-millisecond granularity.

uv.update_time()

Update the event loop's concept of "now". Libuv caches the current time at the start of the event loop tick in order to reduce the number of time-related system calls.

You won't normally need to call this function unless you have callbacks that block the event loop for longer periods of time, where "longer" is somewhat subjective but probably on the order of a millisecond or more.

Returns: Nothing.

uv.walk(callback)

Parameters:

• callback: callable
  • handle: userdata for sub-type of uv_handle_t

Walk the list of handles: callback will be executed with each handle.

Returns: Nothing.

-- Example usage of uv.walk to close all handles that aren't already closing.
uv.walk(function (handle)
  if not handle:is_closing() then
    handle:close()
  end
end)

uv_req_t — Base request

uv_req_t is the base type for all libuv request types.

uv.cancel(req)

method form req:cancel()

Parameters:

• req: userdata for sub-type of uv_req_t

Cancel a pending request. Fails if the request is executing or has finished executing. Only cancellation of uv_fs_t, uv_getaddrinfo_t, uv_getnameinfo_t and uv_work_t requests is currently supported.

Returns: 0 or fail

uv.req_get_type(req)

method form req:get_type()

Parameters:

• req: userdata for sub-type of uv_req_t

Returns the name of the struct for a given request (e.g. "fs" for uv_fs_t) and the libuv enum integer for the request's type (uv_req_type).

Returns: string, integer

uv_handle_t — Base handle

uv_handle_t is the base type for all libuv handle types. All API functions defined here work with any handle type.

uv.is_active(handle)

method form handle:is_active()

Parameters:

• handle: userdata for sub-type of uv_handle_t

Returns true if the handle is active, false if it's inactive. What "active” means depends on the type of handle:

• A uv_async_t handle is always active and cannot be deactivated, except by closing it with uv.close().

• A uv_pipe_t, uv_tcp_t, uv_udp_t, etc. handle - basically any handle that deals with I/O - is active when it is doing something that involves I/O, like reading, writing, connecting, accepting new connections, etc.

• A uv_check_t, uv_idle_t, uv_timer_t, etc. handle is active when it has been started with a call to uv.check_start(), uv.idle_start(), uv.timer_start() etc. until it has been stopped with a call to its respective stop function.

Returns: boolean or fail

uv.is_closing(handle)

method form handle:is_closing()

Parameters:

• handle: userdata for sub-type of uv_handle_t

Returns true if the handle is closing or closed, false otherwise.

Returns: boolean or fail

Note: This function should only be used between the initialization of the handle and the arrival of the close callback.

uv.close(handle, [callback])

method form handle:close([callback])

Parameters:

• handle: userdata for sub-type of uv_handle_t
• callback: callable or nil

Request handle to be closed. callback will be called asynchronously after this call. This MUST be called on each handle before memory is released.

Handles that wrap file descriptors are closed immediately but callback will still be deferred to the next iteration of the event loop. It gives you a chance to free up any resources associated with the handle.

In-progress requests, like uv_connect_t or uv_write_t, are cancelled and have their callbacks called asynchronously with ECANCELED.

Returns: Nothing.

uv.ref(handle)

method form handle:ref()

Parameters:

• handle: userdata for sub-type of uv_handle_t

Reference the given handle. References are idempotent, that is, if a handle is already referenced calling this function again will have no effect.

Returns: Nothing.

See Reference counting.

uv.unref(handle)

method form handle:unref()

Parameters:

• handle: userdata for sub-type of uv_handle_t

Un-reference the given handle. References are idempotent, that is, if a handle is not referenced calling this function again will have no effect.

Returns: Nothing.

See Reference counting.

uv.has_ref(handle)

method form handle:has_ref()

Parameters:

• handle: userdata for sub-type of uv_handle_t

Returns true if the handle referenced, false if not.

Returns: boolean or fail

See Reference counting.

uv.send_buffer_size(handle, [size])

method form handle:send_buffer_size([size])

Parameters:

• handle: userdata for sub-type of uv_handle_t
• size: integer or nil (default: 0)

Gets or sets the size of the send buffer that the operating system uses for the socket.

If size is omitted (or 0), this will return the current send buffer size; otherwise, this will use size to set the new send buffer size.

This function works for TCP, pipe and UDP handles on Unix and for TCP and UDP handles on Windows.

Returns:

• integer or fail (if size is nil or 0)
• 0 or fail (if size is not nil and not 0)

Note: Linux will set double the size and return double the size of the original set value.

uv.recv_buffer_size(handle, [size])

method form handle:recv_buffer_size([size])

Parameters:

• handle: userdata for sub-type of uv_handle_t
• size: integer or nil (default: 0)

Gets or sets the size of the receive buffer that the operating system uses for the socket.

If size is omitted (or 0), this will return the current send buffer size; otherwise, this will use size to set the new send buffer size.

This function works for TCP, pipe and UDP handles on Unix and for TCP and UDP handles on Windows.

Returns:

• integer or fail (if size is nil or 0)
• 0 or fail (if size is not nil and not 0)

Note: Linux will set double the size and return double the size of the original set value.

uv.fileno(handle)

method form handle:fileno()

Parameters:

• handle: userdata for sub-type of uv_handle_t

Gets the platform dependent file descriptor equivalent.

The following handles are supported: TCP, pipes, TTY, UDP and poll. Passing any other handle type will fail with EINVAL.

If a handle doesn't have an attached file descriptor yet or the handle itself has been closed, this function will return EBADF.

Returns: integer or fail

Warning: Be very careful when using this function. libuv assumes it's in control of the file descriptor so any change to it may lead to malfunction.

uv.handle_get_type(handle)

method form handle:get_type()

Parameters:

• handle: userdata for sub-type of uv_handle_t

Returns the name of the struct for a given handle (e.g. "pipe" for uv_pipe_t) and the libuv enum integer for the handle's type (uv_handle_type).

Returns: string, integer

Reference counting

The libuv event loop (if run in the default mode) will run until there are no active and referenced handles left. The user can force the loop to exit early by unreferencing handles which are active, for example by calling uv.unref() after calling uv.timer_start().

A handle can be referenced or unreferenced, the refcounting scheme doesn't use a counter, so both operations are idempotent.

All handles are referenced when active by default, see uv.is_active() for a more detailed explanation on what being active involves.

uv_timer_t — Timer handle

uv_handle_t functions also apply.

Timer handles are used to schedule callbacks to be called in the future.

uv.new_timer()

Creates and initializes a new uv_timer_t. Returns the Lua userdata wrapping it.

Returns: uv_timer_t userdata or fail

-- Creating a simple setTimeout wrapper
local function setTimeout(timeout, callback)
  local timer = uv.new_timer()
  timer:start(timeout, 0, function ()
    timer:stop()
    timer:close()
    callback()
  end)
  return timer
end

-- Creating a simple setInterval wrapper
local function setInterval(interval, callback)
  local timer = uv.new_timer()
  timer:start(interval, interval, function ()
    callback()
  end)
  return timer
end

-- And clearInterval
local function clearInterval(timer)
  timer:stop()
  timer:close()
end

uv.timer_start(timer, timeout, repeat, callback)

method form timer:start(timeout, repeat, callback)

Parameters:

• timer: uv_timer_t userdata
• timeout: integer
• repeat: integer
• callback: callable

Start the timer. timeout and repeat are in milliseconds.

If timeout is zero, the callback fires on the next event loop iteration. If repeat is non-zero, the callback fires first after timeout milliseconds and then repeatedly after repeat milliseconds.

Returns: 0 or fail

uv.timer_stop(timer)

method form timer:stop()

Parameters:

• timer: uv_timer_t userdata

Stop the timer, the callback will not be called anymore.

Returns: 0 or fail

uv.timer_again(timer)

method form timer:again()

Parameters:

• timer: uv_timer_t userdata

Stop the timer, and if it is repeating restart it using the repeat value as the timeout. If the timer has never been started before it raises EINVAL.

Returns: 0 or fail

uv.timer_set_repeat(timer, repeat)

method form timer:set_repeat(repeat)

Parameters:

• timer: uv_timer_t userdata
• repeat: integer

Set the repeat interval value in milliseconds. The timer will be scheduled to run on the given interval, regardless of the callback execution duration, and will follow normal timer semantics in the case of a time-slice overrun.

For example, if a 50 ms repeating timer first runs for 17 ms, it will be scheduled to run again 33 ms later. If other tasks consume more than the 33 ms following the first timer callback, then the callback will run as soon as possible.

Returns: Nothing.

uv.timer_get_repeat(timer)

method form timer:get_repeat()

Parameters:

• timer: uv_timer_t userdata

Get the timer repeat value.

Returns: integer

uv.timer_get_due_in(timer)

method form timer:get_due_in()

Parameters:

• timer: uv_timer_t userdata

Get the timer due value or 0 if it has expired. The time is relative to uv.now().

Returns: integer

Note: New in libuv version 1.40.0.

uv_prepare_t — Prepare handle

uv_handle_t functions also apply.

Prepare handles will run the given callback once per loop iteration, right before polling for I/O.

local prepare = uv.new_prepare()
prepare:start(function()
  print("Before I/O polling")
end)

uv.new_prepare()

Creates and initializes a new uv_prepare_t. Returns the Lua userdata wrapping it.

Returns: uv_prepare_t userdata

uv.prepare_start(prepare, callback)

method form prepare:start(callback)

Parameters:

• prepare: uv_prepare_t userdata
• callback: callable

Start the handle with the given callback.

Returns: 0 or fail

uv.prepare_stop(prepare)

method form prepare:stop()

Parameters:

• prepare: uv_prepare_t userdata

Stop the handle, the callback will no longer be called.

Returns: 0 or fail

uv_check_t — Check handle

uv_handle_t functions also apply.

Check handles will run the given callback once per loop iteration, right after polling for I/O.

local check = uv.new_check()
check:start(function()
  print("After I/O polling")
end)

uv.new_check()

Creates and initializes a new uv_check_t. Returns the Lua userdata wrapping it.

Returns: uv_check_t userdata

uv.check_start(check, callback)

method form check:start(callback)

Parameters:

• check: uv_check_t userdata
• callback: callable

Start the handle with the given callback.

Returns: 0 or fail

uv.check_stop(check)

method form check:stop()

Parameters:

• check: uv_check_t userdata

Stop the handle, the callback will no longer be called.

Returns: 0 or fail

uv_idle_t — Idle handle

uv_handle_t functions also apply.

Idle handles will run the given callback once per loop iteration, right before the uv_prepare_t handles.

Note: The notable difference with prepare handles is that when there are active idle handles, the loop will perform a zero timeout poll instead of blocking for I/O.

Warning: Despite the name, idle handles will get their callbacks called on every loop iteration, not when the loop is actually "idle".

local idle = uv.new_idle()
idle:start(function()
  print("Before I/O polling, no blocking")
end)

uv.new_idle()

Creates and initializes a new uv_idle_t. Returns the Lua userdata wrapping it.

Returns: uv_idle_t userdata

uv.idle_start(idle, callback)

method form idle:start(callback)

Parameters:

• idle: uv_idle_t userdata
• callback: callable

Start the handle with the given callback.

Returns: 0 or fail

uv.idle_stop(idle)

method form idle:stop()

Parameters:

• idle: uv_idle_t userdata

Stop the handle, the callback will no longer be called.

Returns: 0 or fail

uv_async_t — Async handle

uv_handle_t functions also apply.

Async handles allow the user to "wakeup" the event loop and get a callback called from another thread.

local async
async = uv.new_async(function()
  print("async operation ran")
  async:close()
end)

async:send()

uv.new_async(callback)

Parameters:

• callback: callable
  • ...: threadargs passed to/from uv.async_send(async, ...)

Creates and initializes a new uv_async_t. Returns the Lua userdata wrapping it.

Returns: uv_async_t userdata or fail

Note: Unlike other handle initialization functions, this immediately starts the handle.

uv.async_send(async, ...)

method form async:send(...)

Parameters:

• async: uv_async_t userdata
• ...: threadargs

Wakeup the event loop and call the async handle's callback.

Returns: 0 or fail

Note: It's safe to call this function from any thread. The callback will be called on the loop thread.

Warning: libuv will coalesce calls to uv.async_send(async), that is, not every call to it will yield an execution of the callback. For example: if uv.async_send() is called 5 times in a row before the callback is called, the callback will only be called once. If uv.async_send() is called again after the callback was called, it will be called again.

uv_poll_t — Poll handle

uv_handle_t functions also apply.

Poll handles are used to watch file descriptors for readability and writability, similar to the purpose of poll(2).

The purpose of poll handles is to enable integrating external libraries that rely on the event loop to signal it about the socket status changes, like c-ares or libssh2. Using uv_poll_t for any other purpose is not recommended; uv_tcp_t, uv_udp_t, etc. provide an implementation that is faster and more scalable than what can be achieved with uv_poll_t, especially on Windows.

It is possible that poll handles occasionally signal that a file descriptor is readable or writable even when it isn't. The user should therefore always be prepared to handle EAGAIN or equivalent when it attempts to read from or write to the fd.

It is not okay to have multiple active poll handles for the same socket, this can cause libuv to busyloop or otherwise malfunction.

The user should not close a file descriptor while it is being polled by an active poll handle. This can cause the handle to report an error, but it might also start polling another socket. However the fd can be safely closed immediately after a call to uv.poll_stop() or uv.close().

Note: On windows only sockets can be polled with poll handles. On Unix any file descriptor that would be accepted by poll(2) can be used.

uv.new_poll(fd)

Parameters:

• fd: integer

Initialize the handle using a file descriptor.

The file descriptor is set to non-blocking mode.

Returns: uv_poll_t userdata or fail

uv.new_socket_poll(fd)

Parameters:

• fd: integer

Initialize the handle using a socket descriptor. On Unix this is identical to uv.new_poll(). On windows it takes a SOCKET handle.

The socket is set to non-blocking mode.

Returns: uv_poll_t userdata or fail

uv.poll_start(poll, [events], callback)

method form poll:start(events, callback)

Parameters:

• poll: uv_poll_t userdata
• events: string or nil (default: "rw")
• callback: callable
  • err: nil or string
  • events: string or nil

Starts polling the file descriptor. events are: "r", "w", "rw", "d", "rd", "wd", "rwd", "p", "rp", "wp", "rwp", "dp", "rdp", "wdp", or "rwdp" where r is READABLE, w is WRITABLE, d is DISCONNECT, and p is PRIORITIZED. As soon as an event is detected the callback will be called with status set to 0, and the detected events set on the events field.

The user should not close the socket while the handle is active. If the user does that anyway, the callback may be called reporting an error status, but this is not guaranteed.

Returns: 0 or fail

Note: Calling uv.poll_start() on a handle that is already active is fine. Doing so will update the events mask that is being watched for.

uv.poll_stop(poll)

method form poll:stop()

Parameters:

• poll: uv_poll_t userdata

Stop polling the file descriptor, the callback will no longer be called.

Returns: 0 or fail

uv_signal_t — Signal handle

uv_handle_t functions also apply.

Signal handles implement Unix style signal handling on a per-event loop bases.

Windows Notes:

Reception of some signals is emulated on Windows:

• SIGINT is normally delivered when the user presses CTRL+C. However, like on Unix, it is not generated when terminal raw mode is enabled.
• SIGBREAK is delivered when the user pressed CTRL + BREAK.
• SIGHUP is generated when the user closes the console window. On SIGHUP the program is given approximately 10 seconds to perform cleanup. After that Windows will unconditionally terminate it.
• SIGWINCH is raised whenever libuv detects that the console has been resized. SIGWINCH is emulated by libuv when the program uses a uv_tty_t handle to write to the console. SIGWINCH may not always be delivered in a timely manner; libuv will only detect size changes when the cursor is being moved. When a readable uv_tty_t handle is used in raw mode, resizing the console buffer will also trigger a SIGWINCH signal.
• Watchers for other signals can be successfully created, but these signals are never received. These signals are: SIGILL, SIGABRT, SIGFPE, SIGSEGV, SIGTERM and SIGKILL.
• Calls to raise() or abort() to programmatically raise a signal are not detected by libuv; these will not trigger a signal watcher.

Unix Notes:

• SIGKILL and SIGSTOP are impossible to catch.
• Handling SIGBUS, SIGFPE, SIGILL or SIGSEGV via libuv results into undefined behavior.
• SIGABRT will not be caught by libuv if generated by abort(), e.g. through assert().
• On Linux SIGRT0 and SIGRT1 (signals 32 and 33) are used by the NPTL pthreads library to manage threads. Installing watchers for those signals will lead to unpredictable behavior and is strongly discouraged. Future versions of libuv may simply reject them.

-- Create a new signal handler
local signal = uv.new_signal()
-- Define a handler function
uv.signal_start(signal, "sigint", function(signame)
  print("got " .. signame .. ", shutting down")
  os.exit(1)
end)

uv.new_signal()

Creates and initializes a new uv_signal_t. Returns the Lua userdata wrapping it.

Returns: uv_signal_t userdata or fail

uv.signal_start(signal, signame, callback)

method form signal:start(signame, callback)

Parameters:

• signal: uv_signal_t userdata
• signame: string or integer
• callback: callable
  • signame: string

Start the handle with the given callback, watching for the given signal.

See Constants for supported signame input and output values.

Returns: 0 or fail

uv.signal_start_oneshot(signal, signame, callback)

method form signal:start_oneshot(signame, callback)

Parameters:

• signal: uv_signal_t userdata
• signame: string or integer
• callback: callable
  • signame: string

Same functionality as uv.signal_start() but the signal handler is reset the moment the signal is received.

See Constants for supported signame input and output values.

Returns: 0 or fail

uv.signal_stop(signal)

method form signal:stop()

Parameters:

• signal: uv_signal_t userdata

Stop the handle, the callback will no longer be called.

Returns: 0 or fail

uv_process_t — Process handle

uv_handle_t functions also apply.

Process handles will spawn a new process and allow the user to control it and establish communication channels with it using streams.

uv.disable_stdio_inheritance()

Disables inheritance for file descriptors / handles that this process inherited from its parent. The effect is that child processes spawned by this process don't accidentally inherit these handles.

It is recommended to call this function as early in your program as possible, before the inherited file descriptors can be closed or duplicated.

Returns: Nothing.

Note: This function works on a best-effort basis: there is no guarantee that libuv can discover all file descriptors that were inherited. In general it does a better job on Windows than it does on Unix.

uv.spawn(path, options, on_exit)

Parameters:

• path: string
• options: table

  • args: string[] or nil Command line arguments as a list of strings. The first string should not be the path to the program, since that is already provided via path. On Windows, this uses CreateProcess which concatenates the arguments into a string. This can cause some strange errors (see options.verbatim below for Windows).

  • stdio: table or nil Set the file descriptors that will be made available to the child process. The convention is that the first entries are stdin, stdout, and stderr.

    The entries can take many shapes.

    • If integer, then the child process inherits that same zero-indexed fd from the parent process.
    • If uv_stream_t handles are passed in, those are used as a read-write pipe or inherited stream depending if the stream has a valid fd.
    • If nil, means to ignore that fd in the child process.

    Note: On Windows, file descriptors after the third are available to the child process only if the child processes uses the MSVCRT runtime.

    • [1, 2, 3, ..., n]: integer or userdata for sub-type of uv_stream_t or nil

  • env: string[] or nil Set environment variables for the new process. Each entry should be a string in the form of NAME=VALUE.

  • cwd: string or nil Set the current working directory for the sub-process.

  • uid: string or nil Set the child process' user id.

  • gid: string or nil Set the child process' group id.

  • verbatim: boolean or nil If true, do not wrap any arguments in quotes, or perform any other escaping, when converting the argument list into a command line string. This option is only meaningful on Windows systems. On Unix it is silently ignored.

  • detached: boolean or nil If true, spawn the child process in a detached state - this will make it a process group leader, and will effectively enable the child to keep running after the parent exits. Note that the child process will still keep the parent's event loop alive unless the parent process calls uv.unref() on the child's process handle.

  • hide: boolean or nil If true, hide the subprocess console window that would normally be created. This option is only meaningful on Windows systems. On Unix it is silently ignored.

• on_exit: callable
  • code: integer
  • signal: integer

Initializes the process handle and starts the process. If the process is successfully spawned, this function will return the handle and pid of the child process.

Possible reasons for failing to spawn would include (but not be limited to) the file to execute not existing, not having permissions to use the setuid or setgid specified, or not having enough memory to allocate for the new process.

local stdin = uv.new_pipe()
local stdout = uv.new_pipe()
local stderr = uv.new_pipe()

print("stdin", stdin)
print("stdout", stdout)
print("stderr", stderr)

local handle, pid = uv.spawn("cat", {
  stdio = {stdin, stdout, stderr}
}, function(code, signal) -- on exit
  print("exit code", code)
  print("exit signal", signal)
end)

print("process opened", handle, pid)

uv.read_start(stdout, function(err, data)
  assert(not err, err)
  if data then
    print("stdout chunk", stdout, data)
  else
    print("stdout end", stdout)
  end
end)

uv.read_start(stderr, function(err, data)
  assert(not err, err)
  if data then
    print("stderr chunk", stderr, data)
  else
    print("stderr end", stderr)
  end
end)

uv.write(stdin, "Hello World")

uv.shutdown(stdin, function()
  print("stdin shutdown", stdin)
  uv.close(handle, function()
    print("process closed", handle, pid)
  end)
end)

When the child process exits, on_exit is called with an exit code and signal.

Returns: uv_process_t userdata or nil, integer or string, uv.error_name or nil

uv.process_kill(process, [signame])

method form process:kill(signame)

Parameters:

• process: uv_process_t userdata
• signame: string or integer or nil (default: sigterm)

Sends the specified signal to the given process handle. Check the documentation on uv_signal_t for signal support, specially on Windows.

See Constants for supported signame input values.

Returns: 0 or fail

uv.kill(pid, [signame])

Parameters:

• pid: integer
• signame: string or integer or nil (default: sigterm)

Sends the specified signal to the given PID. Check the documentation on uv_signal_t for signal support, specially on Windows.

See Constants for supported signame input values.

Returns: 0 or fail

uv.process_get_pid(process)

method form process:get_pid()

Parameters:

• process: uv_process_t userdata

Returns the handle's pid.

Returns: integer

uv_stream_t — Stream handle

uv_handle_t functions also apply.

Stream handles provide an abstraction of a duplex communication channel. uv_stream_t is an abstract type, libuv provides 3 stream implementations in the form of uv_tcp_t, uv_pipe_t and uv_tty_t.

uv.shutdown(stream, [callback])

method form stream:shutdown([callback])

Parameters:

• stream: userdata for sub-type of uv_stream_t
• callback: callable or nil
  • err: nil or string

Shutdown the outgoing (write) side of a duplex stream. It waits for pending write requests to complete. The callback is called after shutdown is complete.

Returns: uv_shutdown_t userdata or fail

uv.listen(stream, backlog, callback)

method form stream:listen(backlog, callback)

Parameters:

• stream: userdata for sub-type of uv_stream_t
• backlog: integer
• callback: callable
  • err: nil or string

Start listening for incoming connections. backlog indicates the number of connections the kernel might queue, same as listen(2). When a new incoming connection is received the callback is called.

Returns: 0 or fail

uv.accept(stream, client_stream)

method form stream:accept(client_stream)

Parameters:

• stream: userdata for sub-type of uv_stream_t
• client_stream: userdata for sub-type of uv_stream_t

This call is used in conjunction with uv.listen() to accept incoming connections. Call this function after receiving a callback to accept the connection.

When the connection callback is called it is guaranteed that this function will complete successfully the first time. If you attempt to use it more than once, it may fail. It is suggested to only call this function once per connection call.

Returns: 0 or fail

server:listen(128, function (err)
  local client = uv.new_tcp()
  server:accept(client)
end)

uv.read_start(stream, callback)

method form stream:read_start(callback)

Parameters:

• stream: userdata for sub-type of uv_stream_t
• callback: callable
  • err: nil or string
  • data: string or nil

Read data from an incoming stream. The callback will be made several times until there is no more data to read or uv.read_stop() is called. When we've reached EOF, data will be nil.

Returns: 0 or fail

stream:read_start(function (err, chunk)
  if err then
    -- handle read error
  elseif chunk then
    -- handle data
  else
    -- handle disconnect
  end
end)

uv.read_stop(stream)

method form stream:read_stop()

Parameters:

• stream: userdata for sub-type of uv_stream_t

Stop reading data from the stream. The read callback will no longer be called.

This function is idempotent and may be safely called on a stopped stream.

Returns: 0 or fail

uv.write(stream, data, [callback])

method form stream:write(data, [callback])

Parameters:

• stream: userdata for sub-type of uv_stream_t
• data: buffer
• callback: callable or nil
  • err: nil or string

Write data to stream.

data can either be a Lua string or a table of strings. If a table is passed in, the C backend will use writev to send all strings in a single system call.

The optional callback is for knowing when the write is complete.

Returns: uv_write_t userdata or fail

uv.write2(stream, data, send_handle, [callback])

method form stream:write2(data, send_handle, [callback])

Parameters:

• stream: userdata for sub-type of uv_stream_t
• data: buffer
• send_handle: userdata for sub-type of uv_stream_t
• callback: callable or nil
  • err: nil or string

Extended write function for sending handles over a pipe. The pipe must be initialized with ipc option true.

Returns: uv_write_t userdata or fail

Note: send_handle must be a TCP socket or pipe, which is a server or a connection (listening or connected state). Bound sockets or pipes will be assumed to be servers.

uv.try_write(stream, data)

method form stream:try_write(data)

Parameters:

• stream: userdata for sub-type of uv_stream_t
• data: buffer

Same as uv.write(), but won't queue a write request if it can't be completed immediately.

Will return number of bytes written (can be less than the supplied buffer size).

Returns: integer or fail

uv.try_write2(stream, data, send_handle)

method form stream:try_write2(data, send_handle)

Parameters:

• stream: userdata for sub-type of uv_stream_t
• data: buffer
• send_handle: userdata for sub-type of uv_stream_t

Like uv.write2(), but with the properties of uv.try_write(). Not supported on Windows, where it returns UV_EAGAIN.

Will return number of bytes written (can be less than the supplied buffer size).

Returns: integer or fail

uv.is_readable(stream)

method form stream:is_readable()

Parameters:

• stream: userdata for sub-type of uv_stream_t

Returns true if the stream is readable, false otherwise.

Returns: boolean

uv.is_writable(stream)

method form stream:is_writable()

Parameters:

• stream: userdata for sub-type of uv_stream_t

Returns true if the stream is writable, false otherwise.

Returns: boolean

uv.stream_set_blocking(stream, blocking)

method form stream:set_blocking(blocking)

Parameters:

• stream: userdata for sub-type of uv_stream_t
• blocking: boolean

Enable or disable blocking mode for a stream.

When blocking mode is enabled all writes complete synchronously. The interface remains unchanged otherwise, e.g. completion or failure of the operation will still be reported through a callback which is made asynchronously.

Returns: 0 or fail

Warning: Relying too much on this API is not recommended. It is likely to change significantly in the future. Currently this only works on Windows and only for uv_pipe_t handles. Also libuv currently makes no ordering guarantee when the blocking mode is changed after write requests have already been submitted. Therefore it is recommended to set the blocking mode immediately after opening or creating the stream.

uv.stream_get_write_queue_size(stream)

method form stream:get_write_queue_size()

Parameters:

• stream: userdata for sub-type of uv_stream_t

Returns the stream's write queue size.

Returns: integer

uv_tcp_t — TCP handle

uv_handle_t and uv_stream_t functions also apply.

TCP handles are used to represent both TCP streams and servers.

uv.new_tcp([flags])

Parameters:

• flags: string or integer or nil

Creates and initializes a new uv_tcp_t. Returns the Lua userdata wrapping it.

If set, flags must be a valid address family. See Constants for supported address family input values.

Returns: uv_tcp_t userdata or fail

uv.tcp_open(tcp, sock)

method form tcp:open(sock)

Parameters:

• tcp: uv_tcp_t userdata
• sock: integer

Open an existing file descriptor or SOCKET as a TCP handle.

Returns: 0 or fail

Note: The passed file descriptor or SOCKET is not checked for its type, but it's required that it represents a valid stream socket.

uv.tcp_nodelay(tcp, enable)

method form tcp:nodelay(enable)

Parameters:

• tcp: uv_tcp_t userdata
• enable: boolean

Enable / disable Nagle's algorithm.

Returns: 0 or fail

uv.tcp_keepalive(tcp, enable, [delay], [intvl], [cnt])

method form tcp:keepalive(enable, [delay], [intvl], [cnt])

Parameters:

• tcp: uv_tcp_t userdata
• enable: boolean
• delay: integer or nil
• intvl: integer or nil
• cnt: integer or nil

Enable / disable TCP keep-alive. delay is the initial delay in seconds, intvl is the time in seconds between individual keep-alive probes, and cnt is the number of probes to send before assuming the connection is dead. ignored when enable is false.

Returns: 0 or fail

Note: intvl and cnt are only supported with Libuv >= 1.52.0.

uv.tcp_simultaneous_accepts(tcp, enable)

method form tcp:simultaneous_accepts(enable)

Parameters:

• tcp: uv_tcp_t userdata
• enable: boolean

Enable / disable simultaneous asynchronous accept requests that are queued by the operating system when listening for new TCP connections.

This setting is used to tune a TCP server for the desired performance. Having simultaneous accepts can significantly improve the rate of accepting connections (which is why it is enabled by default) but may lead to uneven load distribution in multi-process setups.

Returns: 0 or fail

uv.tcp_bind(tcp, host, port, [flags])

method form tcp:bind(host, port, [flags])

Parameters:

• tcp: uv_tcp_t userdata
• host: string
• port: integer
• flags: table or nil
  • ipv6only: boolean

Bind the handle to an host and port. host should be an IP address and not a domain name. Any flags are set with a table with field ipv6only equal to true or false.

When the port is already taken, you can expect to see an EADDRINUSE error from either uv.tcp_bind(), uv.listen() or uv.tcp_connect(). That is, a successful call to this function does not guarantee that the call to uv.listen() or uv.tcp_connect() will succeed as well.

Use a port of 0 to let the OS assign an ephemeral port. You can look it up later using uv.tcp_getsockname().

Returns: 0 or fail

uv.tcp_getpeername(tcp)

method form tcp:getpeername()

Parameters:

• tcp: uv_tcp_t userdata

Get the address of the peer connected to the handle.

See Constants for supported address family output values.

Returns: table or fail

• ip: string
• family: string
• port: integer

uv.tcp_getsockname(tcp)

method form tcp:getsockname()

Parameters:

• tcp: uv_tcp_t userdata

Get the current address to which the handle is bound.

See Constants for supported address family output values.

Returns: table or fail

• ip: string
• family: string
• port: integer

uv.tcp_connect(tcp, host, port, callback)

method form tcp:connect(host, port, callback)

Parameters:

• tcp: uv_tcp_t userdata
• host: string
• port: integer
• callback: callable
  • err: nil or string

Establish an IPv4 or IPv6 TCP connection.

Returns: uv_connect_t userdata or fail

local client = uv.new_tcp()
client:connect("127.0.0.1", 8080, function (err)
  -- check error and carry on.
end)

uv.tcp_write_queue_size(tcp)

method form tcp:write_queue_size()

Deprecated: Please use uv.stream_get_write_queue_size() instead.

uv.tcp_close_reset(tcp, [callback])

method form tcp:close_reset([callback])

Parameters:

• tcp: uv_tcp_t userdata
• callback: callable or nil

Resets a TCP connection by sending a RST packet. This is accomplished by setting the SO_LINGER socket option with a linger interval of zero and then calling uv.close(). Due to some platform inconsistencies, mixing of uv.shutdown() and uv.tcp_close_reset() calls is not allowed.

Returns: 0 or fail

uv.socketpair([socktype], [protocol], [flags1], [flags2])

Parameters:

• socktype: string or integer or nil (default: stream)
• protocol: string or integer or nil (default: 0)
• flags1: table or nil
  • nonblock: boolean (default: false)
• flags2: table or nil
  • nonblock: boolean (default: false)

Create a pair of connected sockets with the specified properties. The resulting handles can be passed to uv.tcp_open, used with uv.spawn, or for any other purpose.

See Constants for supported socktype input values.

When protocol is set to 0 or nil, it will be automatically chosen based on the socket's domain and type. When protocol is specified as a string, it will be looked up using the getprotobyname(3) function (examples: "ip", "icmp", "tcp", "udp", etc).

Flags:

• nonblock: Opens the specified socket handle for OVERLAPPED or FIONBIO/O_NONBLOCK I/O usage. This is recommended for handles that will be used by libuv, and not usually recommended otherwise.

Equivalent to socketpair(2) with a domain of AF_UNIX.

Returns: [integer, integer] or fail

-- Simple read/write with tcp
local fds = uv.socketpair(nil, nil, {nonblock=true}, {nonblock=true})

local sock1 = uv.new_tcp()
sock1:open(fds[1])

local sock2 = uv.new_tcp()
sock2:open(fds[2])

sock1:write("hello")
sock2:read_start(function(err, chunk)
  assert(not err, err)
  print(chunk)
end)

uv_pipe_t — Pipe handle

uv_handle_t and uv_stream_t functions also apply.

Pipe handles provide an abstraction over local domain sockets on Unix and named pipes on Windows.

local pipe = uv.new_pipe(false)

pipe:bind('/tmp/sock.test')

pipe:listen(128, function()
  local client = uv.new_pipe(false)
  pipe:accept(client)
  client:write("hello!\n")
  client:close()
end)

uv.new_pipe([ipc])

Parameters:

• ipc: boolean or nil (default: false)

Creates and initializes a new uv_pipe_t. Returns the Lua userdata wrapping it. The ipc argument is a boolean to indicate if this pipe will be used for handle passing between processes.

Returns: uv_pipe_t userdata or fail

uv.pipe_open(pipe, fd)

method form pipe:open(fd)

Parameters:

• pipe: uv_pipe_t userdata
• fd: integer

Open an existing file descriptor or uv_handle_t as a pipe.

Returns: 0 or fail

Note: The file descriptor is set to non-blocking mode.

uv.pipe_bind(pipe, name)

method form pipe:bind(name)

Parameters:

• pipe: uv_pipe_t userdata
• name: string

Bind the pipe to a file path (Unix) or a name (Windows).

Returns: 0 or fail

Note: Paths on Unix get truncated to sizeof(sockaddr_un.sun_path) bytes, typically between 92 and 108 bytes.

uv.pipe_connect(pipe, name, [callback])

method form pipe:connect(name, [callback])

Parameters:

• pipe: uv_pipe_t userdata
• name: string
• callback: callable or nil
  • err: nil or string

Connect to the Unix domain socket or the named pipe.

Returns: uv_connect_t userdata or fail

Note: Paths on Unix get truncated to sizeof(sockaddr_un.sun_path) bytes, typically between 92 and 108 bytes.

uv.pipe_getsockname(pipe)

method form pipe:getsockname()

Parameters:

• pipe: uv_pipe_t userdata

Get the name of the Unix domain socket or the named pipe.

Returns: string or fail

uv.pipe_getpeername(pipe)

method form pipe:getpeername()

Parameters:

• pipe: uv_pipe_t userdata

Get the name of the Unix domain socket or the named pipe to which the handle is connected.

Returns: string or fail

uv.pipe_pending_instances(pipe, count)

method form pipe:pending_instances(count)

Parameters:

• pipe: uv_pipe_t userdata
• count: integer

Set the number of pending pipe instance handles when the pipe server is waiting for connections.

Returns: Nothing.

Note: This setting applies to Windows only.

uv.pipe_pending_count(pipe)

method form pipe:pending_count()

Parameters:

• pipe: uv_pipe_t userdata

Returns the pending pipe count for the named pipe.

Returns: integer

uv.pipe_pending_type(pipe)

method form pipe:pending_type()

Parameters:

• pipe: uv_pipe_t userdata

Used to receive handles over IPC pipes.

First - call uv.pipe_pending_count(), if it's > 0 then initialize a handle of the given type, returned by uv.pipe_pending_type() and call uv.accept(pipe, handle).

Returns: string

uv.pipe_chmod(pipe, flags)

method form pipe:chmod(flags)

Parameters:

• pipe: uv_pipe_t userdata
• flags: string

Alters pipe permissions, allowing it to be accessed from processes run by different users. Makes the pipe writable or readable by all users. flags are: "r", "w", "rw", or "wr" where r is READABLE and w is WRITABLE. This function is blocking.

Returns: 0 or fail

uv.pipe([read_flags], [write_flags])

Parameters:

• read_flags: table or nil
  • nonblock: boolean (default: false)
• write_flags: table or nil
  • nonblock: boolean (default: false)

Create a pair of connected pipe handles. Data may be written to the write fd and read from the read fd. The resulting handles can be passed to pipe_open, used with spawn, or for any other purpose.

Flags:

• nonblock: Opens the specified socket handle for OVERLAPPED or FIONBIO/O_NONBLOCK I/O usage. This is recommended for handles that will be used by libuv, and not usually recommended otherwise.

Equivalent to pipe(2) with the O_CLOEXEC flag set.

Returns: table or fail

• read: integer (file descriptor)
• write: integer (file descriptor)

-- Simple read/write with pipe_open
local fds = uv.pipe({nonblock=true}, {nonblock=true})

local read_pipe = uv.new_pipe()
read_pipe:open(fds.read)

local write_pipe = uv.new_pipe()
write_pipe:open(fds.write)

write_pipe:write("hello")
read_pipe:read_start(function(err, chunk)
  assert(not err, err)
  print(chunk)
end)

uv.pipe_bind2(pipe, name, [flags])

method form pipe:bind2(name, [flags])

Parameters:

• pipe: uv_pipe_t userdata
• name: string
• flags: integer or table or nil (default: 0)

Bind the pipe to a file path (Unix) or a name (Windows).

Flags:

• If type(flags) is number, it must be 0 or uv.constants.PIPE_NO_TRUNCATE.
• If type(flags) is table, it must be {} or { no_truncate = true|false }.
• If type(flags) is nil, it use default value 0.
• Returns EINVAL for unsupported flags without performing the bind operation.

Supports Linux abstract namespace sockets. namelen must include the leading '\0' byte but not the trailing nul byte.

Returns: 0 or fail

Note:

1. Paths on Unix get truncated to sizeof(sockaddr_un.sun_path) bytes, typically between 92 and 108 bytes.
2. New in version 1.46.0.

uv.pipe_connect2(pipe, name, [flags], [callback])

method form pipe:connect2(name, [flags], [callback])

Parameters:

• pipe: uv_pipe_t userdata
• name: string
• flags: integer or table or nil (default: 0)
• callback: callable or nil
  • err: nil or string

Connect to the Unix domain socket or the named pipe.

Flags:

• If type(flags) is number, it must be 0 or uv.constants.PIPE_NO_TRUNCATE.
• If type(flags) is table, it must be {} or { no_truncate = true|false }.
• If type(flags) is nil, it use default value 0.
• Returns EINVAL for unsupported flags without performing the bind operation.

Supports Linux abstract namespace sockets. namelen must include the leading nul byte but not the trailing nul byte.

Returns: uv_connect_t userdata or fail

Note:

1. Paths on Unix get truncated to sizeof(sockaddr_un.sun_path) bytes, typically between 92 and 108 bytes.
2. New in version 1.46.0.

uv_tty_t — TTY handle

uv_handle_t and uv_stream_t functions also apply.

TTY handles represent a stream for the console.

-- Simple echo program
local stdin = uv.new_tty(0, true)
local stdout = uv.new_tty(1, false)

stdin:read_start(function (err, data)
  assert(not err, err)
  if data then
    stdout:write(data)
  else
    stdin:close()
    stdout:close()
  end
end)

uv.new_tty(fd, readable)

Parameters:

• fd: integer
• readable: boolean

Initialize a new TTY stream with the given file descriptor. Usually the file descriptor will be:

• 0 - stdin
• 1 - stdout
• 2 - stderr

On Unix this function will determine the path of the fd of the terminal using ttyname_r(3), open it, and use it if the passed file descriptor refers to a TTY. This lets libuv put the tty in non-blocking mode without affecting other processes that share the tty.

This function is not thread safe on systems that don’t support ioctl TIOCGPTN or TIOCPTYGNAME, for instance OpenBSD and Solaris.

Returns: uv_tty_t userdata or fail

Note: If reopening the TTY fails, libuv falls back to blocking writes.

uv.tty_set_mode(tty, mode)

method form tty:set_mode(mode)

Parameters:

• tty: uv_tty_t userdata
• mode: string or integer

Set the TTY using the specified terminal mode.

See Constants for supported TTY mode input values.

Returns: 0 or fail

uv.tty_reset_mode()

To be called when the program exits. Resets TTY settings to default values for the next process to take over.

This function is async signal-safe on Unix platforms but can fail with error code EBUSY if you call it when execution is inside uv.tty_set_mode().

Returns: 0 or fail

uv.tty_get_winsize(tty)

method form tty:get_winsize()

Parameters:

• tty: uv_tty_t userdata

Gets the current Window width and height.

Returns: integer, integer or fail

uv.tty_set_vterm_state(state)

Parameters:

• state: string

Controls whether console virtual terminal sequences are processed by libuv or console. Useful in particular for enabling ConEmu support of ANSI X3.64 and Xterm 256 colors. Otherwise Windows10 consoles are usually detected automatically. State should be one of: "supported" or "unsupported".

This function is only meaningful on Windows systems. On Unix it is silently ignored.

Returns: Nothing.

uv.tty_get_vterm_state()

Get the current state of whether console virtual terminal sequences are handled by libuv or the console. The return value is "supported" or "unsupported".

This function is not implemented on Unix, where it returns ENOTSUP.

Returns: string or fail

uv_udp_t — UDP handle

uv_handle_t functions also apply.

UDP handles encapsulate UDP communication for both clients and servers.

uv.new_udp([flags])

Parameters:

• flags: table or nil
  • family: string or nil
  • mmsgs: integer or nil (default: 1)

Creates and initializes a new uv_udp_t. Returns the Lua userdata wrapping it. The actual socket is created lazily.

See Constants for supported address family input values.

When specified, mmsgs determines the number of messages able to be received at one time via recvmmsg(2) (the allocated buffer will be sized to be able to fit the specified number of max size dgrams). Only has an effect on platforms that support recvmmsg(2).

Note: For backwards compatibility reasons, flags can also be a string or integer. When it is a string, it will be treated like the family key above. When it is an integer, it will be used directly as the flags parameter when calling uv_udp_init_ex.

Returns: uv_udp_t userdata or fail

uv.udp_get_send_queue_size(udp)

method form udp:get_send_queue_size()

Parameters:

• udp: uv_udp_t userdata

Returns the handle's send queue size.

Returns: integer

uv.udp_get_send_queue_count(udp)

method form udp:get_send_queue_count()

Parameters:

• udp: uv_udp_t userdata

Returns the handle's send queue count.

Returns: integer

uv.udp_open(udp, fd, [flags])

method form udp:open(fd, [flags])

Parameters:

• udp: uv_udp_t userdata
• fd: integer
• flags: table or integer or nil
  • reuseaddr: boolean or nil
  • reuseport: boolean or nil

Opens an existing file descriptor or Windows SOCKET as a UDP handle.

Unix only: The only requirement of the sock argument is that it follows the datagram contract (works in unconnected mode, supports sendmsg()/recvmsg(), etc). In other words, other datagram-type sockets like raw sockets or netlink sockets can also be passed to this function.

The file descriptor is set to non-blocking mode.

Note: The passed file descriptor or SOCKET is not checked for its type, but it's required that it represents a valid datagram socket.

Returns: 0 or fail

Note: flags is only supported with Libuv >= 1.52.0.

uv.udp_bind(udp, host, port, [flags])

method form udp:bind(host, port, [flags])

Parameters:

• udp: uv_udp_t userdata
• host: string
• port: number
• flags: table or nil
  • ipv6only: boolean or nil
  • reuseaddr: boolean or nil
  • linux_recverr: boolean or nil
  • reuseport: boolean or nil

Bind the UDP handle to an IP address and port. Any flags are set with a table with fields reuseaddr, ipv6only, linux_recverr, reuseport equal to true or false.

• reuseaddr: Indicates if SO_REUSEADDR will be set when binding the handle. This sets the SO_REUSEPORT socket flag on the BSDs (except for DragonFlyBSD), OS X, and other platforms where SO_REUSEPORTs don't have the capability of load balancing, as the opposite of what reuseport would do. On other Unix platforms, it sets the SO_REUSEADDR flag. What that means is that multiple threads or processes can bind to the same address without error (provided they all set the flag) but only the last one to bind will receive any traffic, in effect "stealing" the port from the previous listener.
• ipv6only: Disables dual stack mode.
• linux_recverr: Indicates if IP_RECVERR/IPV6_RECVERR will be set when binding the handle. This sets IP_RECVERR for IPv4 and IPV6_RECVERR for IPv6 UDP sockets on Linux. This stops the Linux kernel from suppressing some ICMP error messages and enables full ICMP error reporting for faster failover. This flag is no-op on platforms other than Linux.
• reuseport: Indicates if SO_REUSEPORT will be set when binding the handle. This sets the SO_REUSEPORT socket option on supported platforms. Unlike reuseaddr, this flag will make multiple threads or processes that are binding to the same address and port "share" the port, which means incoming datagrams are distributed across the receiving sockets among threads or processes. This flag is available only on Linux 3.9+, DragonFlyBSD 3.6+, FreeBSD 12.0+, Solaris 11.4, and AIX 7.2.5+ for now.

Returns: 0 or fail

Note: The flag linux_recverr is only supported with Libuv >= 1.42.0. The flag reuseport is only supported with Libuv >= 1.49.0.

uv.udp_getsockname(udp)

method form udp:getsockname()

Parameters:

• udp: uv_udp_t userdata

Get the local IP and port of the UDP handle.

Returns: table or fail

• ip: string
• family: string
• port: integer

uv.udp_getpeername(udp)

method form udp:getpeername()

Parameters:

• udp: uv_udp_t userdata

Get the remote IP and port of the UDP handle on connected UDP handles.

Returns: table or fail

• ip: string
• family: string
• port: integer

uv.udp_set_membership(udp, multicast_addr, [interface_addr], membership)

method form udp:set_membership(multicast_addr, interface_addr, membership)

Parameters:

• udp: uv_udp_t userdata
• multicast_addr: string
• interface_addr: string or nil
• membership: string

Set membership for a multicast address. multicast_addr is multicast address to set membership for. interface_addr is interface address. membership can be the string "leave" or "join".

Returns: 0 or fail

uv.udp_set_source_membership(udp, multicast_addr, [interface_addr], source_addr, membership)

method form udp:set_source_membership(multicast_addr, interface_addr, source_addr, membership)

Parameters:

• udp: uv_udp_t userdata
• multicast_addr: string
• interface_addr: string or nil
• source_addr: string
• membership: string

Set membership for a source-specific multicast group. multicast_addr is multicast address to set membership for. interface_addr is interface address. source_addr is source address. membership can be the string "leave" or "join".

Returns: 0 or fail

uv.udp_set_multicast_loop(udp, on)

method form udp:set_multicast_loop(on)

Parameters:

• udp: uv_udp_t userdata
• on: boolean

Set IP multicast loop flag. Makes multicast packets loop back to local sockets.

Returns: 0 or fail

uv.udp_set_multicast_ttl(udp, ttl)

method form udp:set_multicast_ttl(ttl)

Parameters:

• udp: uv_udp_t userdata
• ttl: integer

Set the multicast ttl.

ttl is an integer 1 through 255.

Returns: 0 or fail

uv.udp_set_multicast_interface(udp, interface_addr)

method form udp:set_multicast_interface(interface_addr)

Parameters:

• udp: uv_udp_t userdata
• interface_addr: string

Set the multicast interface to send or receive data on.

Returns: 0 or fail

uv.udp_set_broadcast(udp, on)

method form udp:set_broadcast(on)

Parameters:

• udp: uv_udp_t userdata
• on: boolean

Set broadcast on or off.

Returns: 0 or fail

uv.udp_set_ttl(udp, ttl)

method form udp:set_ttl(ttl)

Parameters:

• udp: uv_udp_t userdata
• ttl: integer

Set the time to live.

ttl is an integer 1 through 255.

Returns: 0 or fail

uv.udp_send(udp, data, host, port, callback)

method form udp:send(data, host, port, callback)

Parameters:

• udp: uv_udp_t userdata
• data: buffer
• host: string
• port: integer
• callback: callable
  • err: nil or string

Send data over the UDP socket. If the socket has not previously been bound with uv.udp_bind() it will be bound to 0.0.0.0 (the "all interfaces" IPv4 address) and a random port number.

Returns: uv_udp_send_t userdata or fail

uv.udp_try_send(udp, data, host, port)

method form udp:try_send(data, host, port)

Parameters:

• udp: uv_udp_t userdata
• data: buffer
• host: string
• port: integer

Same as uv.udp_send(), but won't queue a send request if it can't be completed immediately.

Returns: integer or fail

uv.udp_try_send2(udp, messages, [flags], port)

method form udp:try_send2(messages, flags)

Parameters:

• udp: uv_udp_t userdata
• messages: table
  • [1, 2, 3, ..., n]: table
    • data: buffer
    • addr: table
      • ip: string
      • port: integer
• flags: 0 or table or nil
• port: integer

Like uv.udp_try_send(), but can send multiple datagrams. Lightweight abstraction around sendmmsg(2), with a sendmsg(2) fallback loop for platforms that do not support the former. The udp handle must be fully initialized, either from a uv.udp_bind call, another call that will bind automatically (udp_send, udp_try_send, etc), or from uv.udp_connect.

messages should be an array-like table, where addr must be specified if the udp has not been connected via udp_connect. Otherwise, addr must be nil.

flags is reserved for future extension and must currently be nil or 0 or {}.

Returns the number of messages sent successfully. An error will only be returned if the first datagram failed to be sent.

Returns: integer or fail

-- If client:connect(...) was not called
local addr = { ip = "127.0.0.1", port = 1234 }
client:try_send2({
  { data = "Message 1", addr = addr },
  { data = "Message 2", addr = addr },
})

-- If client:connect(...) was called
client:try_send2({
  { data = "Message 1" },
  { data = "Message 2" },
})

uv.udp_recv_start(udp, callback)

method form udp:recv_start(callback)

Parameters:

• udp: uv_udp_t userdata
• callback: callable
  • err: nil or string
  • data: string or nil
  • addr: table or nil
    • ip: string
    • port: integer
    • family: string
  • flags: table
    • partial: boolean or nil
    • mmsg_chunk: boolean or nil

Prepare for receiving data. If the socket has not previously been bound with uv.udp_bind() it is bound to 0.0.0.0 (the "all interfaces" IPv4 address) and a random port number.

See Constants for supported address family output values.

Returns: 0 or fail

uv.udp_recv_stop(udp)

method form udp:recv_stop()

Parameters:

• udp: uv_udp_t userdata

Stop listening for incoming datagrams.

Returns: 0 or fail

uv.udp_connect(udp, host, port)

method form udp:connect(host, port)

Parameters:

• udp: uv_udp_t userdata
• host: string
• port: integer

Associate the UDP handle to a remote address and port, so every message sent by this handle is automatically sent to that destination. Calling this function with a NULL addr disconnects the handle. Trying to call uv.udp_connect() on an already connected handle will result in an EISCONN error. Trying to disconnect a handle that is not connected will return an ENOTCONN error.

Returns: 0 or fail

uv_fs_event_t — FS Event handle

uv_handle_t functions also apply.

FS Event handles allow the user to monitor a given path for changes, for example, if the file was renamed or there was a generic change in it. This handle uses the best backend for the job on each platform.

uv.new_fs_event()

Creates and initializes a new uv_fs_event_t. Returns the Lua userdata wrapping it.

Returns: uv_fs_event_t userdata or fail

uv.fs_event_start(fs_event, path, flags, callback)

method form fs_event:start(path, flags, callback)

Parameters:

• fs_event: uv_fs_event_t userdata
• path: string
• flags: table
  • watch_entry: boolean or nil (default: false)
  • stat: boolean or nil (default: false)
  • recursive: boolean or nil (default: false)
• callback: callable
  • err: nil or string
  • filename: string
  • events: table
    • change: boolean or nil
    • rename: boolean or nil

Start the handle with the given callback, which will watch the specified path for changes.

Returns: 0 or fail

uv.fs_event_stop(fs_event)

method form fs_event:stop()

Parameters:

• fs_event: uv_fs_event_t userdata

Stop the handle, the callback will no longer be called.

Returns: 0 or fail

uv.fs_event_getpath(fs_event)

method form fs_event:getpath()

Parameters:

• fs_event: uv_fs_event_t userdata

Get the path being monitored by the handle.

Returns: string or fail

uv_fs_poll_t — FS Poll handle

uv_handle_t functions also apply.

FS Poll handles allow the user to monitor a given path for changes. Unlike uv_fs_event_t, fs poll handles use stat to detect when a file has changed so they can work on file systems where fs event handles can't.

uv.new_fs_poll()

Creates and initializes a new uv_fs_poll_t. Returns the Lua userdata wrapping it.

Returns: uv_fs_poll_t userdata or fail

uv.fs_poll_start(fs_poll, path, interval, callback)

method form fs_poll:start(path, interval, callback)

Parameters:

• fs_poll: uv_fs_poll_t userdata
• path: string
• interval: integer
• callback: callable
  • err: nil or string
  • prev: table or nil (see uv.fs_stat)
  • curr: table or nil (see uv.fs_stat)

Check the file at path for changes every interval milliseconds.

Note: For maximum portability, use multi-second intervals. Sub-second intervals will not detect all changes on many file systems.

Returns: 0 or fail

uv.fs_poll_stop(fs_poll)

method form fs_poll:stop()

Parameters:

• fs_poll: uv_fs_poll_t userdata

Stop the handle, the callback will no longer be called.

Returns: 0 or fail

uv.fs_poll_getpath(fs_poll)

method form fs_poll:getpath()

Parameters:

• fs_poll: uv_fs_poll_t userdata

Get the path being monitored by the handle.

Returns: string or fail

File system operations

Most file system functions can operate synchronously or asynchronously. When a synchronous version is called (by omitting a callback), the function will immediately return the results of the FS call. When an asynchronous version is called (by providing a callback), the function will immediately return a uv_fs_t userdata and asynchronously execute its callback; if an error is encountered, the first and only argument passed to the callback will be the err error string; if the operation completes successfully, the first argument will be nil and the remaining arguments will be the results of the FS call.

Synchronous and asynchronous versions of readFile (with naive error handling) are implemented below as an example:

local function readFileSync(path)
  local fd = assert(uv.fs_open(path, "r", 438))
  local stat = assert(uv.fs_fstat(fd))
  local data = assert(uv.fs_read(fd, stat.size, 0))
  assert(uv.fs_close(fd))
  return data
end

local data = readFileSync("main.lua")
print("synchronous read", data)

local function readFile(path, callback)
  uv.fs_open(path, "r", 438, function(err, fd)
    assert(not err, err)
    uv.fs_fstat(fd, function(err, stat)
      assert(not err, err)
      uv.fs_read(fd, stat.size, 0, function(err, data)
        assert(not err, err)
        uv.fs_close(fd, function(err)
          assert(not err, err)
          return callback(data)
        end)
      end)
    end)
  end)
end

readFile("main.lua", function(data)
  print("asynchronous read", data)
end)

uv.fs_close(fd, [callback])

Parameters:

• fd: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to close(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_open(path, flags, mode, [callback])

Parameters:

• path: string
• flags: string or integer
• mode: integer (octal chmod(1) mode, e.g. tonumber('644', 8))
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • fd: integer or nil

Equivalent to open(2). Access flags may be an integer or one of: "r", "rs", "sr", "r+", "rs+", "sr+", "w", "wx", "xw", "w+", "wx+", "xw+", "a", "ax", "xa", "a+", "ax+", or "xa+".

Returns (sync version): integer or fail

Returns (async version): uv_fs_t userdata

Note: On Windows, libuv uses CreateFileW and thus the file is always opened in binary mode. Because of this, the O_BINARY and O_TEXT flags are not supported.

uv.fs_read(fd, size, [offset], [callback])

Parameters:

• fd: integer
• size: integer
• offset: integer or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • data: string or nil

Equivalent to preadv(2). Returns any data. An empty string indicates EOF.

If offset is nil or omitted, it will default to -1, which indicates 'use and update the current file offset.'

Note: When offset is >= 0, the current file offset will not be updated by the read.

Returns (sync version): string or fail

Returns (async version): uv_fs_t userdata

uv.fs_unlink(path, [callback])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to unlink(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_write(fd, data, [offset], [callback])

Parameters:

• fd: integer
• data: buffer
• offset: integer or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • bytes: integer or nil

Equivalent to pwritev(2). Returns the number of bytes written.

If offset is nil or omitted, it will default to -1, which indicates 'use and update the current file offset.'

Note: When offset is >= 0, the current file offset will not be updated by the write.

Returns (sync version): integer or fail

Returns (async version): uv_fs_t userdata

uv.fs_mkdir(path, mode, [callback])

Parameters:

• path: string
• mode: integer (octal chmod(1) mode, e.g. tonumber('755', 8))
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to mkdir(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_mkdtemp(template, [callback])

Parameters:

• template: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • path: string or nil

Equivalent to mkdtemp(3).

Returns (sync version): string or fail

Returns (async version): uv_fs_t userdata

uv.fs_mkstemp(template, [callback])

Parameters:

• template: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • fd: integer or nil
  • path: string or nil

Equivalent to mkstemp(3). Returns a temporary file handle and filename.

Returns (sync version): integer, string or fail

Returns (async version): uv_fs_t userdata

uv.fs_rmdir(path, [callback])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to rmdir(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_scandir(path, [callback])

Parameters:

• path: string
• callback: callable or nil
  • err: nil or string
  • success: uv_fs_t userdata or nil

Equivalent to scandir(3), with a slightly different API. Returns a handle that the user can pass to uv.fs_scandir_next().

Note: This function can be used synchronously or asynchronously. The request userdata is always synchronously returned regardless of whether a callback is provided and the same userdata is passed to the callback if it is provided.

Returns: uv_fs_t userdata or fail

uv.fs_scandir_next(fs)

Parameters:

• fs: uv_fs_t userdata

Called on a uv_fs_t returned by uv.fs_scandir() to get the next directory entry data as a name, type pair. When there are no more entries, nil is returned.

Note: This function only has a synchronous version. See uv.fs_opendir and its related functions for an asynchronous version.

Returns: string, string or nil or fail

uv.fs_stat(path, [callback])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • stat: table or nil
    • dev: integer
    • mode: integer
    • nlink: integer
    • uid: integer
    • gid: integer
    • rdev: integer
    • ino: integer
    • size: integer
    • blksize: integer
    • blocks: integer
    • flags: integer
    • gen: integer
    • atime: table
      • sec: integer
      • nsec: integer
    • mtime: table
      • sec: integer
      • nsec: integer
    • ctime: table
      • sec: integer
      • nsec: integer
    • birthtime: table
      • sec: integer
      • nsec: integer
    • type: string

Equivalent to stat(2).

Returns (sync version): table or fail

• dev: integer
• mode: integer
• nlink: integer
• uid: integer
• gid: integer
• rdev: integer
• ino: integer
• size: integer
• blksize: integer
• blocks: integer
• flags: integer
• gen: integer
• atime: table
  • sec: integer
  • nsec: integer
• mtime: table
  • sec: integer
  • nsec: integer
• ctime: table
  • sec: integer
  • nsec: integer
• birthtime: table
  • sec: integer
  • nsec: integer
• type: string

Returns (async version): uv_fs_t userdata

uv.fs_fstat(fd, [callback])

Parameters:

• fd: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • stat: table or nil
    • dev: integer
    • mode: integer
    • nlink: integer
    • uid: integer
    • gid: integer
    • rdev: integer
    • ino: integer
    • size: integer
    • blksize: integer
    • blocks: integer
    • flags: integer
    • gen: integer
    • atime: table
      • sec: integer
      • nsec: integer
    • mtime: table
      • sec: integer
      • nsec: integer
    • ctime: table
      • sec: integer
      • nsec: integer
    • birthtime: table
      • sec: integer
      • nsec: integer
    • type: string

Equivalent to fstat(2).

Returns (sync version): table or fail

• dev: integer
• mode: integer
• nlink: integer
• uid: integer
• gid: integer
• rdev: integer
• ino: integer
• size: integer
• blksize: integer
• blocks: integer
• flags: integer
• gen: integer
• atime: table
  • sec: integer
  • nsec: integer
• mtime: table
  • sec: integer
  • nsec: integer
• ctime: table
  • sec: integer
  • nsec: integer
• birthtime: table
  • sec: integer
  • nsec: integer
• type: string

Returns (async version): uv_fs_t userdata

uv.fs_lstat(path, [callback])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • stat: table or nil
    • dev: integer
    • mode: integer
    • nlink: integer
    • uid: integer
    • gid: integer
    • rdev: integer
    • ino: integer
    • size: integer
    • blksize: integer
    • blocks: integer
    • flags: integer
    • gen: integer
    • atime: table
      • sec: integer
      • nsec: integer
    • mtime: table
      • sec: integer
      • nsec: integer
    • ctime: table
      • sec: integer
      • nsec: integer
    • birthtime: table
      • sec: integer
      • nsec: integer
    • type: string

Equivalent to lstat(2).

Returns (sync version): table or fail

• dev: integer
• mode: integer
• nlink: integer
• uid: integer
• gid: integer
• rdev: integer
• ino: integer
• size: integer
• blksize: integer
• blocks: integer
• flags: integer
• gen: integer
• atime: table
  • sec: integer
  • nsec: integer
• mtime: table
  • sec: integer
  • nsec: integer
• ctime: table
  • sec: integer
  • nsec: integer
• birthtime: table
  • sec: integer
  • nsec: integer
• type: string

Returns (async version): uv_fs_t userdata

uv.fs_rename(path, new_path, [callback])

Parameters:

• path: string
• new_path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to rename(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_fsync(fd, [callback])

Parameters:

• fd: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to fsync(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_fdatasync(fd, [callback])

Parameters:

• fd: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to fdatasync(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_ftruncate(fd, offset, [callback])

Parameters:

• fd: integer
• offset: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to ftruncate(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_sendfile(out_fd, in_fd, in_offset, size, [callback])

Parameters:

• out_fd: integer
• in_fd: integer
• in_offset: integer
• size: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • bytes: integer or nil

Limited equivalent to sendfile(2). Returns the number of bytes written.

Returns (sync version): integer or fail

Returns (async version): uv_fs_t userdata

uv.fs_access(path, mode, [callback])

Parameters:

• path: string
• mode: string (a combination of the 'r', 'w' and 'x' characters denoting the symbolic mode as per chmod(1))
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • permission: boolean or nil

Equivalent to access(2) on Unix. Windows uses GetFileAttributesW(). Access mode can be an integer or a string containing "R" or "W" or "X". Returns true or false indicating access permission.

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_chmod(path, mode, [callback])

Parameters:

• path: string
• mode: integer (octal chmod(1) mode, e.g. tonumber('644', 8))
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to chmod(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_fchmod(fd, mode, [callback])

Parameters:

• fd: integer
• mode: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to fchmod(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_utime(path, [atime], [mtime], [callback])

Parameters:

• path: string
• atime: number or string or nil
• mtime: number or string or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to utime(2).

See Constants for supported FS Modification Time constants.

Passing "now" or uv.constants.FS_UTIME_NOW as the atime or mtime sets the timestamp to the current time.

Passing nil, "omit", or uv.constants.FS_UTIME_OMIT as the atime or mtime leaves the timestamp untouched.

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_futime(fd, [atime], [mtime], [callback])

Parameters:

• fd: integer
• atime: number or string or nil
• mtime: number or string or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to futimes(3).

See Constants for supported FS Modification Time constants.

Passing "now" or uv.constants.FS_UTIME_NOW as the atime or mtime sets the timestamp to the current time.

Passing nil, "omit", or uv.constants.FS_UTIME_OMIT as the atime or mtime leaves the timestamp untouched.

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_lutime(path, [atime], [mtime], [callback])

Parameters:

• path: string
• atime: number or string or nil
• mtime: number or string or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to lutimes(3).

See Constants for supported FS Modification Time constants.

Passing "now" or uv.constants.FS_UTIME_NOW as the atime or mtime sets the timestamp to the current time.

Passing nil, "omit", or uv.constants.FS_UTIME_OMIT as the atime or mtime leaves the timestamp untouched.

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_link(path, new_path, [callback])

Parameters:

• path: string
• new_path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to link(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_symlink(path, new_path, [flags], [callback])

Parameters:

• path: string
• new_path: string
• flags: table or integer or nil
  • dir: boolean or nil
  • junction: boolean or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to symlink(2). If the flags parameter is omitted, then the 3rd parameter will be treated as the callback.

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_readlink(path, [callback])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • path: string or nil

Equivalent to readlink(2).

Returns (sync version): string or fail

Returns (async version): uv_fs_t userdata

uv.fs_realpath(path, [callback])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • path: string or nil

Equivalent to realpath(3).

Returns (sync version): string or fail

Returns (async version): uv_fs_t userdata

uv.fs_chown(path, uid, gid, [callback])

Parameters:

• path: string
• uid: integer
• gid: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to chown(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_fchown(fd, uid, gid, [callback])

Parameters:

• fd: integer
• uid: integer
• gid: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to fchown(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_lchown(fd, uid, gid, [callback])

Parameters:

• fd: integer
• uid: integer
• gid: integer
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Equivalent to lchown(2).

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_copyfile(path, new_path, [flags], [callback])

Parameters:

• path: string
• new_path: string
• flags: table or integer or nil
  • excl: boolean or nil
  • ficlone: boolean or nil
  • ficlone_force: boolean or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Copies a file from path to new_path. If the flags parameter is omitted, then the 3rd parameter will be treated as the callback.

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_opendir(path, [callback], [entries])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • dir: luv_dir_t userdata or nil
• entries: integer or nil

Opens path as a directory stream. Returns a handle that the user can pass to uv.fs_readdir(). The entries parameter defines the maximum number of entries that should be returned by each call to uv.fs_readdir().

Returns (sync version): luv_dir_t userdata or fail

Returns (async version): uv_fs_t userdata

uv.fs_readdir(dir, [callback])

method form dir:readdir([callback])

Parameters:

• dir: luv_dir_t userdata
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • entries: table or nil
    • [1, 2, 3, ..., n]: table
      • name: string
      • type: string

Iterates over the directory stream luv_dir_t returned by a successful uv.fs_opendir() call. A table of data tables is returned where the number of entries n is equal to or less than the entries parameter used in the associated uv.fs_opendir() call.

Returns (sync version): table or fail

• [1, 2, 3, ..., n]: table
  • name: string
  • type: string

Returns (async version): uv_fs_t userdata

uv.fs_closedir(dir, [callback])

method form dir:closedir([callback])

Parameters:

• dir: luv_dir_t userdata
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • success: boolean or nil

Closes a directory stream returned by a successful uv.fs_opendir() call.

Returns (sync version): boolean or fail

Returns (async version): uv_fs_t userdata

uv.fs_statfs(path, [callback])

Parameters:

• path: string
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • stat: table or nil
    • type: integer
    • bsize: integer
    • blocks: integer
    • bfree: integer
    • bavail: integer
    • files: integer
    • ffree: integer
    • frsize: integer or nil

Equivalent to statfs(2).

Returns (sync version): table or fail

• type: integer
• bsize: integer
• blocks: integer
• bfree: integer
• bavail: integer
• files: integer
• ffree: integer
• frsize: integer or nil

Returns (async version): uv_fs_t userdata

Thread pool work scheduling

Libuv provides a threadpool which can be used to run user code and get notified in the loop thread. This threadpool is internally used to run all file system operations, as well as getaddrinfo and getnameinfo requests.

local function work_callback(a, b)
  return a + b
end

local function after_work_callback(c)
  print("The result is: " .. c)
end

local work = uv.new_work(work_callback, after_work_callback)

work:queue(1, 2)

-- output: "The result is: 3"

uv.new_work(work_callback, after_work_callback)

Parameters:

• work_callback: callable or string
  • ...: threadargs passed to/from uv.queue_work(work_ctx, ...)
• after_work_callback: callable
  • ...: threadargs returned from work_callback

Creates and initializes a new luv_work_ctx_t (not uv_work_t). work_callback is a Lua function or a string containing Lua code or bytecode dumped from a function. Returns the Lua userdata wrapping it.

Returns: luv_work_ctx_t userdata

uv.queue_work(work_ctx, ...)

method form work_ctx:queue(...)

Parameters:

• work_ctx: luv_work_ctx_t userdata
• ...: threadargs

Queues a work request which will run work_callback in a new Lua state in a thread from the threadpool with any additional arguments from .... Values returned from work_callback are passed to after_work_callback, which is called in the main loop thread.

Returns: boolean or fail

DNS utility functions

uv.getaddrinfo([host], [service], [hints], [callback])

Parameters:

• host: string or nil
• service: string or nil
• hints: table or nil
  • family: string or integer or nil
  • socktype: string or integer or nil
  • protocol: string or integer or nil
  • addrconfig: boolean or nil
  • v4mapped: boolean or nil
  • all: boolean or nil
  • numerichost: boolean or nil
  • passive: boolean or nil
  • numericserv: boolean or nil
  • canonname: boolean or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • addresses: table or nil
    • [1, 2, 3, ..., n]: table
      • addr: string
      • family: string
      • port: integer or nil
      • socktype: string
      • protocol: string
      • canonname: string or nil

Equivalent to getaddrinfo(3). Either node or service may be nil but not both.

See Constants for supported address family input and output values.

See Constants for supported socktype input and output values.

When protocol is set to 0 or nil, it will be automatically chosen based on the socket's domain and type. When protocol is specified as a string, it will be looked up using the getprotobyname(3) function. Examples: "ip", "icmp", "tcp", "udp", etc.

Returns (sync version): table or fail

• [1, 2, 3, ..., n]: table
  • addr: string
  • family: string
  • port: integer or nil
  • socktype: string
  • protocol: string
  • canonname: string or nil

Returns (async version): uv_getaddrinfo_t userdata or fail

uv.getnameinfo(address, [callback])

Parameters:

• address: table
  • ip: string or nil
  • port: integer or nil
  • family: string or integer or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • host: string or nil
  • service: string or nil

Equivalent to getnameinfo(3).

See Constants for supported address family input values.

Returns (sync version): string, string or fail

Returns (async version): uv_getnameinfo_t userdata or fail

Threading and synchronization utilities

Libuv provides cross-platform implementations for multiple threading and synchronization primitives. The API largely follows the pthreads API.

uv.new_thread([options], entry, ...)

Parameters:

• options: table or nil
  • stack_size: integer or nil
• entry: function or string
• ...: threadargs passed to entry

Creates and initializes a luv_thread_t (not uv_thread_t). Returns the Lua userdata wrapping it and asynchronously executes entry, which can be either a Lua function or a string containing Lua code or bytecode dumped from a function. Additional arguments ... are passed to the entry function and an optional options table may be provided. Currently accepted option fields are stack_size.

Returns: luv_thread_t userdata or fail

Note: unsafe, please make sure the thread end of life before Lua state close.

uv.thread_equal(thread, other_thread)

method form thread:equal(other_thread)

Parameters:

• thread: luv_thread_t userdata
• other_thread: luv_thread_t userdata

Returns a boolean indicating whether two threads are the same. This function is equivalent to the __eq metamethod.

Returns: boolean

uv.thread_setaffinity(thread, affinity, [get_old_affinity])

method form thread:setaffinity(affinity, [get_old_affinity])

Parameters:

• thread: luv_thread_t userdata
• affinity: table
  • [1, 2, 3, ..., n]: boolean
• get_old_affinity: boolean or nil

Sets the specified thread's affinity setting.

affinity must be a table where each of the keys are a CPU number and the values are booleans that represent whether the thread should be eligible to run on that CPU. If the length of the affinity table is not greater than or equal to uv.cpumask_size(), any CPU numbers missing from the table will have their affinity set to false. If setting the affinity of more than uv.cpumask_size() CPUs is desired, affinity must be an array-like table with no gaps, since #affinity will be used as the cpumask_size if it is greater than uv.cpumask_size().

If get_old_affinity is true, the previous affinity settings for the thread will be returned. Otherwise, true is returned after a successful call.

Note: Thread affinity setting is not atomic on Windows. Unsupported on macOS.

Returns: table or fail

• [1, 2, 3, ..., n]: boolean

uv.thread_getaffinity(thread, [mask_size])

method form thread:getaffinity([mask_size])

Parameters:

• thread: luv_thread_t userdata
• mask_size: integer or nil

Gets the specified thread's affinity setting.

If mask_size is provided, it must be greater than or equal to uv.cpumask_size(). If the mask_size parameter is omitted, then the return of uv.cpumask_size() will be used. Returns an array-like table where each of the keys correspond to a CPU number and the values are booleans that represent whether the thread is eligible to run on that CPU.

Note: Thread affinity getting is not atomic on Windows. Unsupported on macOS.

Returns: table or fail

• [1, 2, 3, ..., n]: boolean

uv.thread_getcpu()

Gets the CPU number on which the calling thread is running.

Note: The first CPU will be returned as the number 1, not 0. This allows for the number to correspond with the table keys used in uv.thread_getaffinity and uv.thread_setaffinity.

Returns: integer or fail

uv.thread_setpriority(thread, priority)

method form thread:setpriority(priority)

Parameters:

• thread: luv_thread_t userdata
• priority: integer

Sets the specified thread's scheduling priority setting. It requires elevated privilege to set specific priorities on some platforms.

The priority can be set to the following constants.

• uv.constants.THREAD_PRIORITY_HIGHEST
• uv.constants.THREAD_PRIORITY_ABOVE_NORMAL
• uv.constants.THREAD_PRIORITY_NORMAL
• uv.constants.THREAD_PRIORITY_BELOW_NORMAL
• uv.constants.THREAD_PRIORITY_LOWEST

Returns: boolean or fail

uv.thread_getpriority(thread)

method form thread:getpriority()

Parameters:

• thread: luv_thread_t userdata

Gets the thread's priority setting.

Retrieves the scheduling priority of the specified thread. The returned priority value is platform dependent.

For Linux, when schedule policy is SCHED_OTHER (default), priority is 0.

Returns: integer or fail

uv.thread_self()

Returns the handle for the thread in which this is called.

Returns: luv_thread_t userdata

uv.thread_join(thread)

method form thread:join()

Parameters:

• thread: luv_thread_t userdata

Waits for the thread to finish executing its entry function.

Returns: boolean or fail

uv.thread_detach(thread)

method form thread:detach()

Parameters:

• thread: luv_thread_t userdata

Detaches a thread. Detached threads automatically release their resources upon termination, eliminating the need for the application to call uv.thread_join.

Returns: boolean or fail

uv.thread_setname(name)

Parameters:

• name: string

Sets the name of the current thread. Different platforms define different limits on the max number of characters a thread name can be: Linux, IBM i (16), macOS (64), Windows (32767), and NetBSD (32), etc. The name will be truncated if name is larger than the limit of the platform.

Returns: 0 or fail

uv.thread_getname(thread)

method form thread:getname()

Parameters:

• thread: luv_thread_t userdata

Gets the name of the thread specified by thread.

Returns: string or fail

uv.sleep(msec)

Parameters:

• msec: integer

Pauses the thread in which this is called for a number of milliseconds.

Returns: Nothing.

uv.new_sem([value])

Parameters:

• value: integer or nil

Creates a new semaphore with the specified initial value. A semaphore is safe to share across threads. It represents an unsigned integer value that can incremented and decremented atomically but any attempt to make it negative will "wait" until the value can be decremented by another thread incrementing it.

The initial value must be a non-negative integer.

Returns: luv_sem_t userdata or fail

Note: A semaphore must be shared between threads, any uv.sem_wait() on a single thread that blocks will deadlock.

uv.sem_post(sem)

method form sem:post()

Parameters:

• sem: luv_sem_t userdata

Increments (unlocks) a semaphore, if the semaphore's value consequently becomes greater than zero then another thread blocked in a sem_wait call will be woken and proceed to decrement the semaphore.

Returns: Nothing.

uv.sem_wait(sem)

method form sem:wait()

Parameters:

• sem: luv_sem_t userdata

Decrements (locks) a semaphore, if the semaphore's value is greater than zero then the value is decremented and the call returns immediately. If the semaphore's value is zero then the call blocks until the semaphore's value rises above zero or the call is interrupted by a signal.

Returns: Nothing.

uv.sem_trywait(sem)

method form sem:trywait()

Parameters:

• sem: luv_sem_t userdata

The same as uv.sem_wait() but returns immediately if the semaphore is not available.

If the semaphore's value was decremented then true is returned, otherwise the semaphore has a value of zero and false is returned.

Returns: boolean

Miscellaneous utilities

uv.exepath()

Returns the executable path.

Returns: string or fail

uv.cwd()

Returns the current working directory.

Returns: string or fail

uv.chdir(cwd)

Parameters:

• cwd: string

Sets the current working directory with the string cwd.

Returns: 0 or fail

uv.get_process_title()

Returns the title of the current process.

Returns: string or fail

uv.set_process_title(title)

Parameters:

• title: string

Sets the title of the current process with the string title.

Returns: 0 or fail

uv.get_total_memory()

Returns the current total system memory in bytes.

Returns: number

uv.get_free_memory()

Returns the current free system memory in bytes.

Returns: number

uv.get_constrained_memory()

Gets the amount of memory available to the process in bytes based on limits imposed by the OS. If there is no such constraint, or the constraint is unknown, 0 is returned. Note that it is not unusual for this value to be less than or greater than the total system memory.

Returns: number

uv.get_available_memory()

Gets the amount of free memory that is still available to the process (in bytes). This differs from uv.get_free_memory() in that it takes into account any limits imposed by the OS. If there is no such constraint, or the constraint is unknown, the amount returned will be identical to uv.get_free_memory().

Returns: number

uv.resident_set_memory()

Returns the resident set size (RSS) for the current process.

Returns: integer or fail

uv.getrusage()

Returns the resource usage.

Returns: table or fail

• utime: table (user CPU time used)
  • sec: integer
  • usec: integer
• stime: table (system CPU time used)
  • sec: integer
  • usec: integer
• maxrss: integer (maximum resident set size)
• ixrss: integer (integral shared memory size)
• idrss: integer (integral unshared data size)
• isrss: integer (integral unshared stack size)
• minflt: integer (page reclaims (soft page faults))
• majflt: integer (page faults (hard page faults))
• nswap: integer (swaps)
• inblock: integer (block input operations)
• oublock: integer (block output operations)
• msgsnd: integer (IPC messages sent)
• msgrcv: integer (IPC messages received)
• nsignals: integer (signals received)
• nvcsw: integer (voluntary context switches)
• nivcsw: integer (involuntary context switches)

uv.getrusage_thread()

Gets the resource usage measures for the calling thread.

Note Not supported on all platforms. May return ENOTSUP. On macOS and Windows not all fields are set (the unsupported fields are filled with zeroes).

Returns: table or fail

• utime: table (user CPU time used)
  • sec: integer
  • usec: integer
• stime: table (system CPU time used)
  • sec: integer
  • usec: integer
• maxrss: integer (maximum resident set size)
• ixrss: integer (integral shared memory size)
• idrss: integer (integral unshared data size)
• isrss: integer (integral unshared stack size)
• minflt: integer (page reclaims (soft page faults))
• majflt: integer (page faults (hard page faults))
• nswap: integer (swaps)
• inblock: integer (block input operations)
• oublock: integer (block output operations)
• msgsnd: integer (IPC messages sent)
• msgrcv: integer (IPC messages received)
• nsignals: integer (signals received)
• nvcsw: integer (voluntary context switches)
• nivcsw: integer (involuntary context switches)

uv.available_parallelism()

Returns an estimate of the default amount of parallelism a program should use. Always returns a non-zero value.

On Linux, inspects the calling thread’s CPU affinity mask to determine if it has been pinned to specific CPUs.

On Windows, the available parallelism may be underreported on systems with more than 64 logical CPUs.

On other platforms, reports the number of CPUs that the operating system considers to be online.

Returns: integer

uv.cpu_info()

Returns information about the CPU(s) on the system as a table of tables for each CPU found.

Returns: table or fail

• [1, 2, 3, ..., n]: table
  • model: string
  • speed: integer
  • times: table
    • user: integer
    • nice: integer
    • sys: integer
    • idle: integer
    • irq: integer

uv.cpumask_size()

Returns the maximum size of the mask used for process/thread affinities, or ENOTSUP if affinities are not supported on the current platform.

Returns: integer or fail

uv.getpid()

Deprecated: Please use uv.os_getpid() instead.

uv.getuid()

Returns the user ID of the process.

Returns: integer

Note: This is not a libuv function and is not supported on Windows.

uv.getgid()

Returns the group ID of the process.

Returns: integer

Note: This is not a libuv function and is not supported on Windows.

uv.setuid(id)

Parameters:

• id: integer

Sets the user ID of the process with the integer id.

Returns: Nothing.

Note: This is not a libuv function and is not supported on Windows.

uv.setgid(id)

Parameters:

• id: integer

Sets the group ID of the process with the integer id.

Returns: Nothing.

Note: This is not a libuv function and is not supported on Windows.

uv.hrtime()

Returns a current high-resolution time in nanoseconds as a number. This is relative to an arbitrary time in the past. It is not related to the time of day and therefore not subject to clock drift. The primary use is for measuring time between intervals.

Returns: integer

uv.clock_gettime(clock_id)

Parameters:

• clock_id: string

Obtain the current system time from a high-resolution real-time or monotonic clock source. clock_id can be the string "monotonic" or "realtime".

The real-time clock counts from the UNIX epoch (1970-01-01) and is subject to time adjustments; it can jump back in time.

The monotonic clock counts from an arbitrary point in the past and never jumps back in time.

Returns: table or fail

• sec: integer
• nsec: integer

uv.uptime()

Returns the current system uptime in seconds.

Returns: number or fail

uv.print_all_handles()

Prints all handles associated with the main loop to stderr. The format is [flags] handle-type handle-address. Flags are R for referenced, A for active and I for internal.

Returns: Nothing.

Note: This is not available on Windows.

Warning: This function is meant for ad hoc debugging, there are no API/ABI stability guarantees.

uv.print_active_handles()

The same as uv.print_all_handles() except only active handles are printed.

Returns: Nothing.

Note: This is not available on Windows.

Warning: This function is meant for ad hoc debugging, there are no API/ABI stability guarantees.

uv.guess_handle(fd)

Parameters:

• fd: integer

Used to detect what type of stream should be used with a given file descriptor fd. Usually this will be used during initialization to guess the type of the stdio streams.

Returns: string

uv.gettimeofday()

Cross-platform implementation of gettimeofday(2). Returns the seconds and microseconds of a unix time as a pair.

Returns: integer, integer or fail

uv.interface_addresses()

Returns address information about the network interfaces on the system in a table. Each table key is the name of the interface while each associated value is an array of address information where fields are ip, family, netmask, internal, and mac.

See Constants for supported address family output values.

Returns: table or fail

• [string]: table
  • ip: string
  • family: string
  • netmask: string
  • internal: boolean
  • mac: string

uv.if_indextoname(ifindex)

Parameters:

• ifindex: integer

IPv6-capable implementation of if_indextoname(3).

Returns: string or fail

uv.if_indextoiid(ifindex)

Parameters:

• ifindex: integer

Retrieves a network interface identifier suitable for use in an IPv6 scoped address. On Windows, returns the numeric ifindex as a string. On all other platforms, uv.if_indextoname() is used.

Returns: string or fail

uv.loadavg()

Returns the load average as a triad. Not supported on Windows.

Returns: number, number, number

uv.os_uname()

Returns system information.

Returns: table

• sysname: string
• release: string
• version: string
• machine: string

uv.os_gethostname()

Returns the hostname.

Returns: string

uv.os_getenv(name, [size])

Parameters:

• name: string
• size: integer or nil (default: LUA_BUFFERSIZE)

Returns the environment variable specified by name as string. The internal buffer size can be set by defining size. If omitted, LUAL_BUFFERSIZE is used. If the environment variable exceeds the storage available in the internal buffer, ENOBUFS is returned. If no matching environment variable exists, ENOENT is returned.

Returns: string or fail

Warning: This function is not thread-safe.

uv.os_setenv(name, value)

Parameters:

• name: string
• value: string

Sets the environmental variable specified by name with the string value.

Returns: boolean or fail

Warning: This function is not thread-safe.

uv.os_unsetenv(name)

Parameters:

• name: string

Unsets the environmental variable specified by name.

Returns: boolean or fail

Warning: This function is not thread-safe.

uv.os_environ()

Returns all environmental variables as a dynamic table of names associated with their corresponding values.

Returns: table

Warning: This function is not thread-safe.

uv.os_homedir()

Returns the home directory.

Returns: string or fail

Warning: This function is not thread-safe.

uv.os_tmpdir()

Returns a temporary directory.

Returns: string or fail

Warning: This function is not thread-safe.

uv.os_get_passwd()

Gets a subset of the password file entry for the current effective uid (not the real uid). On Windows, uid, gid, and shell are set to nil.

Returns: table or fail

• username: string
• uid: integer? (nil on Windows)
• gid: integer? (nil on Windows)
• shell: string? (nil on Windows)
• homedir: string

uv.os_getpid()

Returns the current process ID.

Returns: number

uv.os_getppid()

Returns the parent process ID.

Returns: number

uv.os_getpriority(pid)

Parameters:

• pid: integer

Returns the scheduling priority of the process specified by pid.

Returns: integer or fail

uv.os_setpriority(pid, priority)

Parameters:

• pid: integer
• priority: integer

Sets the scheduling priority of the process specified by pid. The priority range is between -20 (high priority) and 19 (low priority).

Returns: boolean or fail

uv.random(len, [flags], [callback])

Parameters:

• len: integer
• flags: 0 or table or nil
• callback: callable or nil (async if provided, sync if nil)
  • err: nil or string
  • bytes: string or nil

Fills a string of length len with cryptographically strong random bytes acquired from the system CSPRNG. flags is reserved for future extension and must currently be nil or 0 or {}.

Short reads are not possible. When less than len random bytes are available, a non-zero error value is returned or passed to the callback. If the callback is omitted, this function is completed synchronously.

The synchronous version may block indefinitely when not enough entropy is available. The asynchronous version may not ever finish when the system is low on entropy.

Returns (sync version): string or fail

Returns (async version): 0 or fail

uv.translate_sys_error(errcode)

Parameters:

• errcode: integer

Returns the libuv error message and error name (both in string form, see err and name in Error Handling) equivalent to the given platform dependent error code: POSIX error codes on Unix (the ones stored in errno), and Win32 error codes on Windows (those returned by GetLastError() or WSAGetLastError()).

Returns: string, string or nil

Metrics operations

uv.metrics_idle_time()

Retrieve the amount of time the event loop has been idle in the kernel’s event provider (e.g. epoll_wait). The call is thread safe.

The return value is the accumulated time spent idle in the kernel’s event provider starting from when the uv_loop_t was configured to collect the idle time.

Note: The event loop will not begin accumulating the event provider’s idle time until calling loop_configure with "metrics_idle_time".

Returns: number

uv.metrics_info()

Get the metrics table from current set of event loop metrics. It is recommended to retrieve these metrics in a prepare callback (see uv.new_prepare, uv.prepare_start) in order to make sure there are no inconsistencies with the metrics counters.

Returns: table

• loop_count: number
• events: integer
• events_waiting: number

String manipulation functions

These string utilities are needed internally for dealing with Windows, and are exported to allow clients to work uniformly with this data when the libuv API is not complete.

Notes:

1. New in luv version 1.49.0.
2. See the WTF-8 spec for information about WTF-8.
3. Luv uses Lua-style strings, which means that all inputs and return values (UTF-8 or UTF-16 strings) do not include a NUL terminator.

uv.utf16_length_as_wtf8(utf16)

Parameters:

• utf16: string

Get the length (in bytes) of a UTF-16 (or UCS-2) string utf16 value after converting it to WTF-8.

Returns: integer

uv.utf16_to_wtf8(utf16)

Parameters:

• utf16: string

Convert UTF-16 (or UCS-2) string utf16 to WTF-8 string. The endianness of the UTF-16 (or UCS-2) string is assumed to be the same as the native endianness of the platform.

Returns: string

uv.wtf8_length_as_utf16(wtf8)

Parameters:

• wtf8: string

Get the length (in UTF-16 code units) of a WTF-8 wtf8 value after converting it to UTF-16 (or UCS-2). Note: The number of bytes needed for a UTF-16 (or UCS-2) string is <number of code units> * 2.

Returns: integer

uv.wtf8_to_utf16(wtf8)

Parameters:

• wtf8: string

Convert WTF-8 string in wtf8 to UTF-16 (or UCS-2) string. The endianness of the UTF-16 (or UCS-2) string will be the same as the native endianness of the platform.

Returns: string

---