We’ve updated our print settings for the UltiMaker S-series to ensure your parts aren't just high-quality, but also high-performance. These updates deliver higher-quality prints at faster speeds, whether for prototyping or production. Visit our website if you want to learn which of our S Series 3D printers is right for you
+Factor 4 Plus is supported by a new, field-proven gantry system specifically designed to maintain strict quality standards during continuous, round-the-clock industrial cycles. It is a heavy-duty architecture built to run shift after shift. Industrial-grade hardware optimized for manufacturing and defense. Built for manufacturing, delivering up to twice the productivity of the Factor 4. High-speed printing that never compromises on precision or part accuracy. Learn more about this printer here
diff --git a/cura/resources/texts/whats_new/1.html b/cura/resources/texts/whats_new/1.html deleted file mode 100644 index 31b9ed8..0000000 --- a/cura/resources/texts/whats_new/1.html +++ /dev/null @@ -1,2 +0,0 @@ -Fewer mistakes, less wasted time. Settings for disabled extruders are now greyed out to prevent "ghost editing," where you might spend time fine-tuning the Printing Temperature or Retraction Distance for Extruder 2, only to realize later that the entire model was set to print with Extruder 1. Additionally, a warning appears in the Preview stage if your model is hidden because an extruder is unchecked.
diff --git a/cura/resources/texts/whats_new/2.html b/cura/resources/texts/whats_new/2.html deleted file mode 100644 index 8913185..0000000 --- a/cura/resources/texts/whats_new/2.html +++ /dev/null @@ -1,2 +0,0 @@ -Bridging behavior over rectangular empty spaces and infill are now placed in a smarter way. The bridge lines are now anchored to layers below where possible. Bridge lines can now also be interlaced for improved quality.
diff --git a/cura/resources/texts/whats_new/3.html b/cura/resources/texts/whats_new/3.html deleted file mode 100644 index 8a8bccf..0000000 --- a/cura/resources/texts/whats_new/3.html +++ /dev/null @@ -1,2 +0,0 @@ -New Honeycomb and Octagon infill types ensure the toolpath never crosses its own path on the same layer, reducing the chance of the nozzle hitting the infill during printing. Infill Start/End Move settings move the infill starts away from the wall to prevent surface blobs from a nozzle traveling to start a new infill line.
diff --git a/cura/resources/texts/whats_new/4.html b/cura/resources/texts/whats_new/4.html deleted file mode 100644 index 9f4a108..0000000 --- a/cura/resources/texts/whats_new/4.html +++ /dev/null @@ -1,2 +0,0 @@ -Cura Cloud is an online version of Cura designed for fast, confident slicing within the UltiMaker ecosystem. It lives in UltiMaker Digital Factory - ideal for connected printers, beginners, and anyone who values simplicity. We’ve made it available for everyone to try out, even without an account. click here to take a look