OpenCL_C.txt

// Copyright 2017-2020 The Khronos Group. This work is licensed under a
// Creative Commons Attribution 4.0 International License; see
// http://creativecommons.org/licenses/by/4.0/

= The OpenCL^(TM)^ C Specification
:R: pass:q,r[^(R)^]
Khronos{R} OpenCL Working Group
:data-uri:
:icons: font
:toc2:
:toclevels: 3
:max-width: 100
:numbered:
:imagewidth: 800
:fullimagewidth: width="800"
:source-highlighter: coderay
:title-logo-image: image:images/OpenCL.png[Logo,pdfwidth=4in,align=right]
:sectnumoffset: 5

// Needed for expressing C math in unary ops section
:pp: ++

:cpp: pass:[C++]
:cpp11: pass:[C++11]
:private: pass:[__private]
:global: pass:[__global]
:local: pass:[__local]
:constant: pass:[__constant]
:rte: pass:[_rte]
:rtz: pass:[_rtz]
:rtn: pass:[_rtn]
:rtp: pass:[_rtp]

// Various special / math symbols. This is easier to edit with than Unicode.
include::config/attribs.txt[]

// External Footnotes
include::c/footnotes.asciidoc[]

<<<<

include::copyrights.txt[]

<<<

// :numbered:

:leveloffset: 1


[[the-opencl-c-programming-language]]
= The OpenCL C Programming Language

[NOTE]
--
This document starts at chapter 6 to keep the section numbers historically
consistent with previous versions of the OpenCL and OpenCL C Programming
Language specifications.
--

This section describes the OpenCL C programming language.
The OpenCL C programming language may be used to write kernels that execute
on an OpenCL device.

The OpenCL C programming language (also referred to as OpenCL C) is based
on the <<C99-spec,ISO/IEC 9899:1999 Programming languages - C>> specification
(also referred to as the C99 specification, or just C99), with extensions
and restrictions to support parallel kernels.
In addition, some features of OpenCL C are based on the <<C11-spec,ISO/IEC
9899:2011 Information technology - Programming languages - C>> specification
(also referred to as the C11 specification, or just C11).

This document describes the modifications and restrictions to C99 and C11
in OpenCL C.
Please refer to the C99 specification for a detailed description of the
language grammar.

[[unified-spec]]
== Unified Specification

This document specifies all versions of OpenCL C.

There are several ways that an OpenCL C feature may be described in terms of
what versions of OpenCL C specify that feature.

  * Requires support for OpenCL C _major.minor_ or newer: Features that were
    introduced in version _major.minor_.
    Compilers for an earlier version of OpenCL C will not provide these
    features.
  ** In some instances the variation of "For OpenCL C _major.minor_ or newer"
     is used, it has the identical meaning.
  * Requires support for OpenCL C 2.0, or OpenCL C 3.0 or newer and the
    `+__opencl_c_feature_name+` feature:
    Features that were introduced in OpenCL C 2.0 as mandatory, but made
    <<optional-functionality, optional>> in OpenCL C 3.0.
    Compilers for versions of OpenCL C 1.2 or below will not provide these
    features, compilers for OpenCL C 2.0 will provide these features,
    compilers for OpenCL C 3.0 or newer may provide these features.
  * Requires support for OpenCL C 3.0 or newer and the
    `+__opencl_c_feature_name+` feature: <<optional-functionality,
    Optional>> features that were introduced in OpenCL C 3.0.
    Compilers for an earlier version of OpenCL C will not provide these
    features, compilers for OpenCL C 3.0 or newer may provide these features.
  * Deprecated by OpenCL C _major.minor_: Features that were deprecated
    in version _major.minor_, see the definition of deprecation in the
    glossary of the main OpenCL specification.
  * Universal: Features that have no mention of what version they are missing
    before or deprecated by are specified for all versions of OpenCL C.

[[optional-functionality]]
== Optional functionality

Some language functionality is optional and will not be supported by all
devices. Such functionality is represented by optional language features or
language extensions. Support of optional functionality in OpenCL C is indicated
by the presence of special predefined macros.

[[features]]
=== Features

IMPORTANT: Feature test macros <<unified-spec, require>> support for OpenCL C
3.0 or newer.

Optional language features are described in this document. They are optional
from OpenCL C 3.0 onwards and therefore are not supported by all
implementations. When an OpenCL C 3.0 optional feature is supported, an
associated __feature test macro__ will be predefined.

The following table describes OpenCL C 3.0 or newer features and their
meaning. The naming convention for the feature macros is
`+__opencl_c_<name>+`.

Feature macro identifiers are used as names of features in this document.

[[table-optional-lang-features]]
.Optional features in OpenCL C 3.0 or newer and their predefined macros.
[cols="1,1",options="header",]
|====
| *Feature Macro/Name*
| *Brief Description*

| `+__opencl_c_3d_image_writes+`
| The OpenCL C compiler supports built-in functions for writing to 3D image
objects.

OpenCL C compilers that define the feature macro `+__opencl_c_3d_image_writes+`
must also define the feature macro `+__opencl_c_images+`.

| `+__opencl_c_atomic_order_acq_rel+`
| The OpenCL C compiler supports enumerations and built-in functions for atomic
operations with acquire and release memory consistency orders.

| `+__opencl_c_atomic_order_seq_cst+`
| The OpenCL C compiler supports enumerations and built-in functions for atomic
operations and fences with sequentially consistent memory consistency order.

| `+__opencl_c_atomic_scope_device+`
| The OpenCL C compiler supports enumerations and built-in functions for atomic
operations and fences with device memory scope.

| `+__opencl_c_atomic_scope_all_devices+`
| The OpenCL C compiler supports enumerations and built-in functions for atomic
operations and fences with all with memory scope across all devices that can
share SVM memory with each other and the host process.

| `+__opencl_c_device_enqueue+`
| The OpenCL C compiler supports built-in functions to enqueue additional work
from the device.

OpenCL C compilers that define the feature macro `+__opencl_c_device_enqueue+`
must also define the feature macro `+__opencl_c_generic_address_space+`.

| `+__opencl_c_generic_address_space+`
| The OpenCL C compiler supports the unnamed generic address space.

| `+__opencl_c_fp64+`
| The OpenCL C compiler supports types and built-in functions with 64-bit
floating point types.

| `+__opencl_c_images+`
| The OpenCL C compiler supports types and built-in functions for images.

| `+__opencl_c_int64+`
| The OpenCL C compiler supports types and built-in functions with 64-bit
integers.

OpenCL C compilers for FULL profile devices or devices with 64-bit pointers
must always define the `+__opencl_c_int64+` feature macro.

| `+__opencl_c_pipes+`
| The OpenCL C compiler supports the pipe modifier and built-in functions
to read and write from a pipe.

OpenCL C compilers that define the feature macro `+__opencl_c_pipes+` must
also define the feature macro `+__opencl_c_generic_address_space+`.

| `+__opencl_c_program_scope_global_variables+`
| The OpenCL C compiler supports program scope variables in the global address
space.

| `+__opencl_c_read_write_images+`
| The OpenCL C compiler supports reading from and writing to the same image
object in a kernel.

OpenCL C compilers that define the feature macro
`+__opencl_c_read_write_images+` must also define the feature macro
`+__opencl_c_images+`.

| `+__opencl_c_subgroups+`
| The OpenCL C compiler supports built-in functions operating on sub-groupings
of work-items.

| `+__opencl_c_work_group_collective_functions+`
| The OpenCL C compiler supports built-in functions that perform collective
operations across a work-group.

|====

In OpenCL C 3.0 or newer, feature macros must expand to the value `1` if the
feature macro is defined by the OpenCL C compiler. A feature macro must not be
defined if the feature is not supported by the OpenCL C compiler. A feature
macro may expand to a different value in the future, but if this occurs the
value of the feature macro must compare greater than the prior value of the
feature macro.

[[extensions]]
=== Extensions

Optional functionality that is not defined in this document is referred to
as extensions. Extensions are described in
<<opencl-extension-spec,the OpenCL Extension Specification>>.

[NOTE]
--
Prior to OpenCL C 3.0 some optional features described in this document were
referred to as optional core features. Their presence could be
indicated by the predefined extension macros. If any of the features has been
an optional extension in earlier OpenCL versions it can still be used as an
extension i.e. the same predefined extension macros are still valid in OpenCL C
3.0 or newer. However, the use of feature macros is preferred whenever
possible.
--

[[supported-data-types]]
== Supported Data Types

The following data types are supported.


[[built-in-scalar-data-types]]
=== Built-in Scalar Data Types

[open,refpage='scalarDataTypes',desc='Built-in Scalar Data Types',type='freeform',spec='clang',anchor='built-in-scalar-data-types',xrefs='alignmentOfDataTypes halfDataType otherDataTypes reservedDataTypes vectorDataTypes']
--

The following table describes the list of built-in scalar data types.

[[table-builtin-scalar-types]]
.Built-in Scalar Data Types
[cols=",",]
|====
| *Type*        | *Description*
| `bool` footnote:[{fn-bool}]
    | A conditional data type which is either _true_ or _false_.
     The value _true_ expands to the integer constant 1 and the value
     _false_ expands to the integer constant 0.
| `char`
    | A signed two's complement 8-bit integer.
| `unsigned char`, `uchar`
    | An unsigned 8-bit integer.
| `short`
    | A signed two's complement 16-bit integer.
| `unsigned short`, `ushort`
    | An unsigned 16-bit integer.
| `int`
    | A signed two's complement 32-bit integer.
| `unsigned int`, `uint`
    | An unsigned 32-bit integer.
| `long` footnote:long[{fn-long}]
    | A signed two's complement 64-bit integer.
| `unsigned long`, `ulong` footnote:long[]
    | An unsigned 64-bit integer.
| `float`
    | A 32-bit floating-point.
      The `float` data type must conform to the IEEE 754 single precision
      storage format.
| `double` footnote:[{fn-double}]
    | A 64-bit floating-point.
      The `double` data type must conform to the IEEE 754 double precision
      storage format.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
      Also see extension *cl_khr_fp64*.
| `half`
    | A 16-bit floating-point.
      The `half` data type must conform to the IEEE 754-2008 half precision
      storage format.
| `size_t` footnote:size_t[{fn-size_t}]
    | The unsigned integer type of the result of the `sizeof` operator.
| `ptrdiff_t` footnote:size_t[]
    | A signed integer type that is the result of subtracting two
      pointers.
| `intptr_t` footnote:size_t[]
    | A signed integer type with the property that any valid pointer to
      `void` can be converted to this type, then converted back to pointer
      to `void`, and the result will compare equal to the original pointer.
| `uintptr_t` footnote:size_t[]
    | An unsigned integer type with the property that any valid pointer
      to `void` can be converted to this type, then converted back to
      pointer to `void`, and the result will compare equal to the original
      pointer.
| `void`
    | The `void` type comprises an empty set of values; it is an incomplete
      type that cannot be completed.
|====

Most built-in scalar data types are also declared as appropriate types in
the OpenCL API (and header files) that can be used by an application.
The following table describes the built-in scalar data type in the OpenCL C
programming language and the corresponding data type available to the
application:

[cols=",",]
|====
| *Type in OpenCL Language*  | *API type for application*
| `bool`                     | n/a
| `char`                     | `cl_char`
| `unsigned char`, `uchar`   | `cl_uchar`
| `short`                    | `cl_short`
| `unsigned short`, `ushort` | `cl_ushort`
| `int`                      | `cl_int`
| `unsigned int`, `uint`     | `cl_uint`
| `long`                     | `cl_long`
| `unsigned long`, `ulong`   | `cl_ulong`
| `float`                    | `cl_float`
| `double`                   | `cl_double` footnote:[{fn-cl_double}]
| `half`                     | `cl_half`
| `size_t`                   | n/a
| `ptrdiff_t`                | n/a
| `intptr_t`                 | n/a
| `uintptr_t`                | n/a
| `void`                     | `void`
|====
--


[[the-half-data-type]]
==== The `half` Data Type

[open,refpage='halfDataType',desc='The half Data Type',type='freeform',spec='clang',anchor='the-half-data-type',xrefs='alignmentOfDataTypes otherDataTypes reservedDataTypes scalarDataTypes vectorDataTypes']
--

The `half` data type must be IEEE 754-2008 compliant.
`half` numbers have 1 sign bit, 5 exponent bits, and 10 mantissa bits.
The interpretation of the sign, exponent and mantissa is analogous to IEEE
754 floating-point numbers.
The exponent bias is 15.
The `half` data type must represent finite and normal numbers, denormalized
numbers, infinities and NaN.
Denormalized numbers for the `half` data type which may be generated when
converting a `float` to a `half` using *vstore_half* and converting a `half`
to a `float` using *vload_half* cannot be flushed to zero.
Conversions from `float` to `half` correctly round the mantissa to 11 bits
of precision.
Conversions from `half` to `float` are lossless; all `half` numbers are
exactly representable as `float` values.

The `half` data type can only be used to declare a pointer to a buffer that
contains `half` values.
A few valid examples are given below:

[source,c]
----------
void
bar (__global half *p)
{
    ...
}

__kernel void
foo (__global half *pg, __local half *pl)
{
    __global half *ptr;
    int offset;

    ptr = pg + offset;
    bar(ptr);
}
----------

Below are some examples that are not valid usage of the `half` type:

[source,c]
----------
half a;
half b[100];
half *p;
a = *p; //  not allowed. must use *vload_half* function
----------

Loads from a pointer to a `half` and stores to a pointer to a `half` can be
performed using the <<vector-data-load-and-store-functions,vector data load
and store functions>> *vload_half*, *vload_half__n__*, *vloada_halfn* and
*vstore_half*, *vstore_half__n__*, and *vstorea_halfn*.
The load functions read scalar or vector `half` values from memory and
convert them to a scalar or vector `float` value.
The store functions take a scalar or vector `float` value as input, convert
it to a `half` scalar or vector value (with appropriate rounding mode) and
write the `half` scalar or vector value to memory.
--


[[built-in-vector-data-types]]
=== Built-in Vector Data Types

[open,refpage='vectorDataTypes',desc='Built-in Vector Data Types',type='freeform',spec='clang',anchor='built-in-vector-data-types',xrefs='alignmentOfDataTypes otherDataTypes reservedDataTypes scalarDataTypes']
--

The `char`, `unsigned char`, `short`, `unsigned short`, `int`, `unsigned int`,
`long`, `unsigned long`, `float` and `double vector data types are supported.
footnote:[{fn-vector-types}]
The vector data type is defined with the type name, i.e. `char`, `uchar`,
`short`, `ushort`, `int`, `uint`, `long`, `ulong`, `float`, or `double`
followed by a literal value _n_ that defines the number of elements in the
vector.
Supported values of _n_ are 2, 3, 4, 8, and 16 for all vector data types.

NOTE: Vector types with three elements, i.e. where _n_ is 3, <<unified-spec,
require>> support for OpenCL C 1.1 or newer.

The following table describes the list of built-in vector data types.

[[table-builtin-vector-types]]
.Built-in Vector Data Types
[cols=",",]
|====
| *Type* | *Description*
| `char__n__`
    | A vector of _n_ 8-bit signed two's complement integer values.
| `uchar__n__`
    | A vector of _n_ 8-bit unsigned integer values.
| `short__n__`
    | A vector of _n_ 16-bit signed two's complement integer values.
| `ushort__n__`
    | A vector of _n_ 16-bit unsigned integer values.
| `int__n__`
    | A vector of _n_ 32-bit signed two's complement integer values.
| `uint__n__`
    | A vector of _n_ 32-bit unsigned integer values.
| `long__n__` footnote:long-vec[{fn-long-vec}]
    | A vector of _n_ 64-bit signed two's complement integer values.
| `ulong__n__` footnote:long-vec[]
    | A vector of _n_ 64-bit unsigned integer values.
| `float__n__`
    | A vector of _n_ 32-bit floating-point values.
| `double__n__` footnote:[{fn-double-vec}]
    | A vector of _n_ 64-bit floating-point values.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
      Also see extension *cl_khr_fp64*.
|====

The built-in vector data types are also declared as appropriate types in the
OpenCL API (and header files) that can be used by an application.
The following table describes the built-in vector data type in the OpenCL C
programming language and the corresponding data type available to the
application:

[cols=",",]
|====
| *Type in OpenCL Language* | *API type for application*
| `char__n__`               | `cl_char__n__`
| `uchar__n__`              | `cl_uchar__n__`
| `short__n__`              | `cl_short__n__`
| `ushort__n__`             | `cl_ushort__n__`
| `int__n__`                | `cl_int__n__`
| `uint__n__`               | `cl_uint__n__`
| `long__n__`               | `cl_long__n__`
| `ulong__n__`              | `cl_ulong__n__`
| `float__n__`              | `cl_float__n__`
| `double__n__`             | `cl_double__n__`
|====
--


[[other-built-in-data-types]]
=== Other Built-in Data Types

[open,refpage='otherDataTypes',desc='Other Built-in Data Types',type='freeform',spec='clang',anchor='other-built-in-data-types',xrefs='alignmentOfDataTypes reservedDataTypes scalarDataTypes vectorDataTypes']
--

The following table describes the list of additional data types supported by
OpenCL.

[[table-other-builtin-types]]
.Other Built-in Data Types
[cols=",",]
|====
| *Type* | *Description*
| `image2d_t` footnote:image-functions[{fn-image-functions}]
    | A 2D image.
| `image3d_t` footnote:image-functions[]
    | A 3D image.
| `image2d_array_t` footnote:image-functions[]
    | A 2D image array.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| `image1d_t` footnote:image-functions[]
    | A 1D image.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| `image1d_buffer_t` footnote:image-functions[]
    | A 1D image created from a buffer object.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| `image1d_array_t` footnote:image-functions[]
    | A 1D image array.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| `image2d_depth_t` footnote:image-functions[]
    | A 2D depth image.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| `image2d_array_depth_t` footnote:image-functions[]
    | A 2D depth image array.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| `sampler_t` footnote:image-functions[]
    | A sampler type.
| `queue_t`
    | A device command queue.
      This queue can only be used to enqueue commands from kernels executing
      on the device.

      <<unifed-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_device_enqueue+` feature.
| `ndrange_t`
    | The N-dimensional range over which a kernel executes.

      <<unified-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_device_enqueue+` feature.
| `clk_event_t`
    | A device side event that identifies a command enqueue to
      a device command queue.

      <<unified-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_device_enqueue+` feature.
| `reserve_id_t`
    | A reservation ID.
      This opaque type is used to identify the reservation for
      <<pipe-functions,reading and writing a pipe>>.

      <<unified-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_pipes+` feature.
| `event_t`
    | An event.
      This can be used to identify <<async-copies,async copies>> from
      `global` to `local` memory and vice-versa.
| `cl_mem_fence_flags`
    | This is a bitfield and can be 0 or a combination of the following
      values ORed together:

      `CLK_GLOBAL_MEM_FENCE` +
      `CLK_LOCAL_MEM_FENCE` +
      `CLK_IMAGE_MEM_FENCE`

      These flags are described in detail in the
      <<synchronization-functions, synchronization functions>> section.
|====

[NOTE]
====
The `image2d_t`, `image3d_t`, `image2d_array_t`, `image1d_t`,
`image1d_buffer_t`, `image1d_array_t`, `image2d_depth_t`,
`image2d_array_depth_t` and `sampler_t` types are only defined if the device
supports images, i.e. the value of the <<opencl-device-queries,
`CL_DEVICE_IMAGE_SUPPORT` device query>>) is `CL_TRUE`.
If this is the case then an OpenCL C 3.0 or newer compiler must also define
the `+__opencl_c_images+` feature macro.
====

The C99 derived types (arrays, structs, unions, functions, and pointers),
constructed from the built-in <<built-in-scalar-data-types,scalar>>,
<<built-in-vector-data-types,vector>>, and
<<other-built-in-data-types,other>> data types are supported, with specified
<<restrictions,restrictions>>.

The following tables describe the other built-in data types in OpenCL
described in <<table-other-builtin-types>> and the corresponding data type
available to the application:

[cols=",",]
|====
| *Type in OpenCL C* | *API type for application*
| `image2d_t`        | `cl_mem`
| `image3d_t`        | `cl_mem`
| `image2d_array_t`  | `cl_mem`
| `image1d_t`        | `cl_mem`
| `image1d_buffer_t` | `cl_mem`
| `image1d_array_t`  | `cl_mem`
| `image2d_depth_t`  | `cl_mem`
| `image2d_array_depth_t` | `cl_mem`
| `sampler_t`        | `cl_sampler`
| `queue_t`          | `cl_command_queue`
| `ndrange_t`        | N/A
| `clk_event_t`      | N/A
| `reserve_id_t`     | N/A
| `event_t`          | N/A
| `cl_mem_fence_flags`  | N/A
|====
--


[[reserved-data-types]]
=== Reserved Data Types

[open,refpage='reservedDataTypes',desc='Reserved Data Types',type='freeform',spec='clang',anchor='reserved-data-types',xrefs='alignmentOfDataTypes otherDataTypes scalarDataTypes vectorDataTypes']
--

The data type names described in the following table are reserved and cannot
be used by applications as type names.
The vector data type names defined in <<table-builtin-vector-types>>, but
where _n_ is any value other than 2, 3, 4, 8 and 16, are also reserved.

[[table-reserved-types]]
.Reserved Data Types
[cols=",",]
|====
| *Type* | *Description*
| `bool__n__`
    | A boolean vector.
| `half__n__`
    | A 16-bit floating-point vector.
| `quad`, `quad__n__`
    | A 128-bit floating-point scalar and vector.
| `complex half`, `complex half__n__`
    | A complex 16-bit floating-point scalar and vector.
| `imaginary half`, `imaginary half__n__`
    | An imaginary 16-bit floating-point scalar and vector.
| `complex float`, `complex float__n__`
    | A complex 32-bit floating-point scalar and vector.
| `imaginary float`, `imaginary float__n__`
    | An imaginary 32-bit floating-point scalar and vector.
| `complex double`, `complex double__n__`
    | A complex 64-bit floating-point scalar and vector.
| `imaginary double`, `imaginary double__n__`
    | An imaginary 64-bit floating-point scalar and vector.
| `complex quad`, `complex quad__n__`
    | A complex 128-bit floating-point scalar and vector.
| `imaginary quad`, `imaginary quad__n__`
    | An imaginary 128-bit floating-point scalar and vector.
| `float__n__x__m__`
    | An _n_ {times} _m_ matrix of single precision floating-point values
      stored in column-major order.
| `double__n__x__m__`
    | An _n_ {times} _m_ matrix of double precision floating-point values
      stored in column-major order.
| `long double`, `long double__n__`
    | A floating-point scalar and vector type with at least as much
      precision and range as a `double` and no more precision and range than
      a quad.
| `long long, long long__n__`
    | A 128-bit signed integer scalar and vector.
| `unsigned long long`,
  `ulong long`,
  `ulong long__n__`
    | A 128-bit unsigned integer scalar and vector.
|====
--


[[alignment-of-types]]
=== Alignment of Types

[open,refpage='alignmentOfDataTypes',desc='Alignment of Data Types',type='freeform',spec='clang',anchor='alignment-of-types',xrefs='otherDataTypes reservedDataTypes scalarDataTypes vectorDataTypes']
--

A data item declared to be a data type in memory is always aligned to the
size of the data type in bytes.
For example, a `float4` variable will be aligned to a 16-byte boundary, a
`char2` variable will be aligned to a 2-byte boundary.

For 3-component vector data types, the size of the data type is `4 *
sizeof(component)`.
This means that a 3-component vector data type will be aligned to a `4 *
sizeof(component)` boundary.
The *vload3* and *vstore3* built-in functions can be used to read and write,
respectively, 3-component vector data types from an array of packed scalar
data type.

A built-in data type that is not a power of two bytes in size must be
aligned to the next larger power of two.
This rule applies to built-in types only, not structs or unions.

The OpenCL compiler is responsible for aligning data items to the
appropriate alignment as required by the data type.
For arguments to a `+__kernel+` function declared to be a pointer to a data
type, the OpenCL compiler can assume that the pointee is always
appropriately aligned as required by the data type.
The behavior of an unaligned load or store is undefined, except for the
<<vector-data-load-and-store-functions,vector data load and store
functions>> *vload__n__*, *vload_half__n__*, *vstore__n__*, and
*vstore_half__n__*.
The vector load functions can read a vector from an address aligned to the
element type of the vector.
The vector store functions can write a vector to an address aligned to the
element type of the vector.
--


[[vector-literals]]
=== Vector Literals

Vector literals can be used to create vectors from a list of scalars,
vectors or a mixture thereof.
A vector literal can be used either as a vector initializer or as a primary
expression.
Whether a vector literal can be used as an l-value is implementation-defined.

A vector literal is written as a parenthesized vector type followed by a
parenthesized comma delimited list of parameters.
A vector literal operates as an overloaded function.
The forms of the function that are available is the set of possible argument
lists for which all arguments have the same element type as the result
vector, and the total number of elements is equal to the number of elements
in the result vector.
In addition, a form with a single scalar of the same type as the element
type of the vector is available.
For example, the following forms are available for `float4`:

[source,c]
----------
(float4)( float, float, float, float )
(float4)( float2, float, float )
(float4)( float, float2, float )
(float4)( float, float, float2 )
(float4)( float2, float2 )
(float4)( float3, float )
(float4)( float, float3 )
(float4)( float )
----------

Operands are evaluated by standard rules for function evaluation, except
that implicit scalar widening shall not occur.
The order in which the operands are evaluated is undefined.
The operands are assigned to their respective positions in the result vector
as they appear in memory order.
That is, the first element of the first operand is assigned to `result.x`,
the second element of the first operand (or the first element of the second
operand if the first operand was a scalar) is assigned to `result.y`, etc.
In the case of the form that has a single scalar operand, the operand is
replicated across all lanes of the vector.

Examples:

[source,c]
----------
float4 f = (float4)(1.0f, 2.0f, 3.0f, 4.0f);
uint4 u = (uint4)(1); //  u will be (1, 1, 1, 1).
float4 f = (float4)((float2)(1.0f, 2.0f), (float2)(3.0f, 4.0f));
float4 f = (float4)(1.0f, (float2)(2.0f, 3.0f), 4.0f);
float4 f = (float4)(1.0f, 2.0f); //  error
----------


[[vector-components]]
=== Vector Components

The components of vector data types can be addressed as
`<vector_data_type>.xyzw`.
Vector data types with two or more components, such as `char2`, can access `.xy` elements.
Vector data types with three or more components, such as `uint3`, can access `.xyz` elements.
Vector data types with four or more components, such as `ulong4` or `float8`, can access `.xyzw` elements.

In OpenCL C 3.0, the components of vector data types can also be addressed as
`<vector_data_type>.rgba`.
Vector data types with two or more components can access `.rg` elements.
Vector data types with three or more components can access `.rgb` elements.
Vector data types with four or more components can access `.rgba` elements.

Accessing components beyond those declared for the vector type is an error
so, for example:

[source,c]
----------
float2 coord;
coord.x = 1.0f; // is legal
coord.r = 1.0f; // is legal in OpenCL C 3.0
coord.z = 1.0f; // is illegal, since coord only has two components

float3 pos;
pos.z = 1.0f; // is legal
pos.b = 1.0f; // is legal in OpenCL C 3.0
pos.w = 1.0f; // is illegal, since pos only has three components
----------

The component selection syntax allows multiple components to be selected by
appending their names after the period (*.*).

[source,c]
----------
float4 c;

c.xyzw = (float4)(1.0f, 2.0f, 3.0f, 4.0f);
c.z = 1.0f;
c.xy = (float2)(3.0f, 4.0f);
c.xyz = (float3)(3.0f, 4.0f, 5.0f);
----------

The component selection syntax also allows components to be permuted or
replicated.

[source,c]
----------
float4 pos = (float4)(1.0f, 2.0f, 3.0f, 4.0f);

float4 swiz= pos.wzyx; // swiz = (4.0f, 3.0f, 2.0f, 1.0f)

float4 dup = pos.xxyy; // dup = (1.0f, 1.0f, 2.0f, 2.0f)
----------

The component group notation can occur on the left hand side of an
expression.
To form an l-value, swizzling must be applied to an l-value of vector type,
contain no duplicate components, and it results in an l-value of scalar or
vector type, depending on number of components specified.
Each component must be a supported scalar or vector type.

[source,c]
----------
float4 pos = (float4)(1.0f, 2.0f, 3.0f, 4.0f);

pos.xw = (float2)(5.0f, 6.0f);// pos = (5.0f, 2.0f, 3.0f, 6.0f)
pos.wx = (float2)(7.0f, 8.0f);// pos = (8.0f, 2.0f, 3.0f, 7.0f)
pos.xyz = (float3)(3.0f, 5.0f, 9.0f); // pos = (3.0f, 5.0f, 9.0f, 4.0f)
pos.xx = (float2)(3.0f, 4.0f);// illegal - 'x' used twice

// illegal - mismatch between float2 and float4
pos.xy = (float4)(1.0f, 2.0f, 3.0f, 4.0f);

float4 a, b, c, d;
float16 x;
x = (float16)(a, b, c, d);
x = (float16)(a.xxxx, b.xyz, c.xyz, d.xyz, a.yzw);

// illegal - component a.xxxxxxx is not a valid vector type
x = (float16)(a.xxxxxxx, b.xyz, c.xyz, d.xyz);
----------

Elements of vector data types can also be accessed using a numeric index to
refer to the appropriate element in the vector.
The numeric indices that can be used are given in the table below:

[[table-vector-indices]]
.Numeric indices for built-in vector data types
[cols=",",]
|====
| *Vector Components* | *Numeric indices that can be used*
| 2-component         | 0, 1
| 3-component         | 0, 1, 2
| 4-component         | 0, 1, 2, 3
| 8-component         | 0, 1, 2, 3, 4, 5, 6, 7
| 16-component        | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
                        a, A, b, B, c, C, d, D, e, E, f, F
|====

The numeric indices must be preceded by the letter `s` or `S`.

In the following example

[source,c]
----------
float8 f;
----------

`f.s0` refers to the 1^st^ element of the `float8` variable `f` and `f.s7`
refers to the 8^th^ element of the `float8` variable `f`.

In the following example

[source,c]
----------
float16 x;
----------

`x.sa` (or `x.sA`) refers to the 11^th^ element of the `float16` variable
`x` and `x.sf` (or `x.sF`) refers to the 16^th^ element of the `float16`
variable `x`.

The numeric indices used to refer to an appropriate element in the vector
cannot be intermixed with `.xyzw` notation used to access elements of a 1 ..
4 component vector.

For example

[source,c]
----------
float4 f, a;

a = f.x12w;       // illegal use of numeric indices with .xyzw

a.xyzw = f.s0123; // valid
----------

Vector data types can use the `.lo` (or `.even`) and `.hi` (or `.odd`)
suffixes to get smaller vector types or to combine smaller vector types to a
larger vector type.
Multiple levels of `.lo` (or `.even`) and `.hi` (or `.odd`) suffixes can be
used until they refer to a scalar term.

The `.lo` suffix refers to the lower half of a given vector.
The `.hi` suffix refers to the upper half of a given vector.

The `.even` suffix refers to the even elements of a vector.
The `.odd` suffix refers to the odd elements of a vector.

Some examples to help illustrate this are given below:

[source,c]
----------
float4 vf;

float2 low = vf.lo;    // returns vf.xy
float2 high = vf.hi;   // returns vf.zw

float2 even = vf.even; // returns vf.xz
float2 odd = vf.odd;   // returns vf.yw
----------

The suffixes `.lo` (or `.even`) and `.hi` (or `.odd`) for a 3-component
vector type operate as if the 3-component vector type is a 4-component
vector type with the value in the `w` component undefined.

Some examples are given below:

[source,c]
----------
float8 vf;
float4 odd = vf.odd;
float4 even = vf.even;
float2 high = vf.even.hi;
float2 low = vf.odd.lo;

// interleave LR stereo stream
float4 left, right;
float8 interleaved;
interleaved.even = left;
interleaved.odd = right;

// deinterleave
left = interleaved.even;
right = interleaved.odd;

// transpose a 4x4 matrix

void transpose( float4 m[4] )
{
    // read matrix into a float16 vector
    float16 x = (float16)( m[0], m[1], m[2], m[3] );
    float16 t;

    // transpose
    t.even = x.lo;
    t.odd = x.hi;
    x.even = t.lo;
    x.odd = t.hi;

    // write back
    m[0] = x.lo.lo; // { m[0][0], m[1][0], m[2][0], m[3][0] }
    m[1] = x.lo.hi; // { m[0][1], m[1][1], m[2][1], m[3][1] }
    m[2] = x.hi.lo; // { m[0][2], m[1][2], m[2][2], m[3][2] }
    m[3] = x.hi.hi; // { m[0][3], m[1][3], m[2][3], m[3][3] }
}

float3 vf = (float3)(1.0f, 2.0f, 3.0f);
float2 low = vf.lo; // (1.0f, 2.0f);
float2 high = vf.hi; // (3.0f, _undefined_);
----------

It is an error to take the address of a vector element and will result in a
compilation error.
For example:

[source,c]
----------
float8 vf;

float *f = &vf.x; m         // is illegal
float2 *f2 = &vf.s07;       // is illegal

float4 *odd = &vf.odd;      // is illegal
float4 *even = &vf.even;    // is illegal
float2 *high = &vf.even.hi; // is illegal
float2 *low = &vf.odd.lo;   // is illegal
----------


[[aliasing-rules]]
=== Aliasing Rules

OpenCL C programs shall comply with the C99 type-based aliasing rules
defined in <<C99-spec,section 6.5, item 7 of the C99 Specification>>.
The OpenCL C built-in vector data types are considered aggregate types
footnote:[{fn-aggregate-types}] for the purpose of applying these
aliasing rules.

[[keywords]]
=== Keywords

The following names are reserved for use as keywords in OpenCL C and shall
not be used otherwise.

  * Names reserved as keywords by C99.
  * OpenCL C data types defined in <<table-builtin-vector-types>>,
    <<table-other-builtin-types>>, and <<table-reserved-types>>.
  * Address space qualifiers: `+__global+`, `global`, `+__local+`, `local`,
    `+__constant+`, `constant`, `+__private+`, and `private`.
    `+__generic+` and `generic` are reserved for future use.
  * Function qualifiers: `+__kernel+` and `kernel`.
  * Access qualifiers: `+__read_only+`, `read_only`, `+__write_only+`,
    `write_only`, `+__read_write+` and `read_write`.
  * `uniform`, `pipe`.


[[conversions-and-type-casting]]
== Conversions and Type Casting


[[implicit-conversions]]
=== Implicit Conversions

Implicit conversions between scalar built-in types defined in
<<table-builtin-scalar-types>> (except `void` and `half`
footnote:[{fn-cl_khr_fp16}]) are supported.
When an implicit conversion is done, it is not just a re-interpretation of
the expression's value but a conversion of that value to an equivalent value
in the new type.
For example, the integer value 5 will be converted to the floating-point
value 5.0.

Implicit conversions from a scalar type to a vector type are allowed.
In this case, the scalar may be subject to the usual arithmetic conversion
to the element type used by the vector.
The scalar type is then widened to the vector.

Implicit conversions between built-in vector data types are disallowed.

Implicit conversions for pointer types follow the rules described in the
<C99-spec,C99 Specification>>.


[[explicit-casts]]
=== Explicit Casts

Standard typecasts for built-in scalar data types defined in
<<table-builtin-scalar-types>> will perform appropriate conversion (except
`void` and `half` footnote:[{fn-cl_khr_fp16}]).
In the example below:

[9] Unless the *cl_khr_fp16* extension is supported and has been enabled.

[source,c]
----------
float f = 1.0f;
int i = (int)f;
----------

`f` stores `0x3F800000` and `i` stores `0x1` which is the floating-point
value `1.0f` in `f` converted to an integer value.

Explicit casts between vector types are not legal.
The examples below will generate a compilation error.

[source,c]
----------
int4 i;
uint4 u = (uint4) i; //  not allowed

float4 f;
int4 i = (int4) f; //  not allowed

float4 f;
int8 i = (int8) f; //  not allowed
----------

Scalar to vector conversions may be performed by casting the scalar to the
desired vector data type.
Type casting will also perform appropriate arithmetic conversion.
The round to zero rounding mode will be used for conversions to built-in
integer vector types.
The default rounding mode will be used for conversions to floating-point
vector types.
When casting a `bool` to a vector integer data type, the vector components
will be set to -1 (i.e. all bits set) if the bool value is _true_ and 0
otherwise.

Below are some correct examples of explicit casts.

[source,c]
----------
float f = 1.0f;
float4 va = (float4)f;

// va is a float4 vector with elements (f, f, f, f).

uchar u = 0xFF;
float4 vb = (float4)u;

// vb is a float4 vector with elements
// ((float)u, (float)u, (float)u, (float)u).

float f = 2.0f;
int2 vc = (int2)f;

// vc is an int2 vector with elements ((int)f, (int)f).

uchar4 vtrue = (uchar4)true;

// vtrue is a uchar4 vector with elements (0xff, 0xff,
// 0xff, 0xff).
----------


[[explicit-conversions]]
=== Explicit Conversions

Explicit conversions may be performed using the

[source,c]
----------
convert_destType(sourceType)
----------

suite of functions.
These provide a full set of type conversions between supported
<<built-in-scalar-data-types,scalar>>,
<<built-in-vector-data-types,vector>>, and
<<other-built-in-data-types,other>> data types except for the following
types: `bool`, `half`, `size_t`, `ptrdiff_t`, `intptr_t`, `uintptr_t`, and
`void`.

The number of elements in the source and destination vectors must match.

In the example below:

[source,c]
----------
uchar4 u;
int4 c = convert_int4(u);
----------

`convert_int4` converts a `uchar4` vector `u` to an `int4` vector `c`.

[source,c]
----------
float f;
int i = convert_int(f);
----------

`convert_int` converts a `float` scalar `f` to an int scalar `i`.

The behavior of the conversion may be modified by one or two optional
modifiers that specify saturation for out-of-range inputs and rounding
behavior.

The full form of the scalar convert function is:

[source,c]
----------
destType convert_destType<_sat><_roundingMode>(sourceType)
----------

where `dstType` is the destination scalar type and `sourceType` is the source scalar type.

The full form of the vector convert function is:

[source,c]
----------
destTypen convert_destTypen<_sat><_roundingMode>(sourceTypen)
----------

where `destTypen` is the n-element destination vector type and `sourceTypen` is the n-element source vector type.


[[data-types]]
==== Data Types

Conversions are available for the following scalar types: `char`, `uchar`,
`short`, `ushort`, `int`, `uint`, `long`, `ulong`, `float`, and built-in
vector types derived therefrom.
The operand and result type must have the same number of elements.
The operand and result type may be the same type in which case the
conversion has no effect on the type or value of an expression.

Conversions between integer types follow the conversion rules specified in
<<C99-spec,sections 6.3.1.1 and 6.3.1.3 of the C99 Specification>> except
for <<out-of-range-behavior,out-of-range behavior and saturated
conversions>>.


[[rounding-modes]]
==== Rounding Modes

Conversions to and from floating-point type shall conform to IEEE-754
rounding rules.
Conversions may have an optional rounding mode modifier described in the
following table.

[[table-rounding-mode]]
.Rounding Modes
[cols=",",]
|====
| *Modifier*            | *Rounding Mode Description*
| `_rte`                | Round to nearest even
| `_rtz`                | Round toward zero
| `_rtp`                | Round toward positive infinity
| `_rtn`                | Round toward negative infinity
| no modifier specified | Use the default rounding mode for this destination
                          type, `_rtz` for conversion to integers or the
                          default rounding mode for conversion to
                          floating-point types.
|====

By default, conversions to integer type use the `_rtz` (round toward zero)
rounding mode and conversions to floating-point type
footnote:[{fn-float-conversion-rounding}] use the default rounding mode.
The only default floating-point rounding mode supported is round to nearest
even i.e the default rounding mode will be `_rte` for floating-point types.

[[out-of-range-behavior]]
==== Out-of-Range Behavior and Saturated Conversions

When the conversion operand is either greater than the greatest
representable destination value or less than the least representable
destination value, it is said to be out-of-range.
The result of out-of-range conversion is determined by the conversion rules
specified by <<C99-spec,section 6.3 of the C99 Specification>>.
When converting from a floating-point type to integer type, the behavior is
implementation-defined.

Conversions to integer type may opt to convert using the optional saturated
mode by appending the _sat modifier to the conversion function name.
When in saturated mode, values that are outside the representable range
shall clamp to the nearest representable value in the destination format.
(NaN should be converted to 0).

Conversions to floating-point type shall conform to IEEE-754 rounding rules.
The `_sat` modifier may not be used for conversions to floating-point
formats.


[[explicit-conversion-examples]]
==== Explicit Conversion Examples

Example 1:

[source,c]
----------
short4 s;

// negative values clamped to 0
ushort4 u = convert_ushort4_sat( s );

// values > CHAR_MAX converted to CHAR_MAX
// values < CHAR_MIN converted to CHAR_MIN
char4 c = convert_char4_sat( s );
----------

Example 2:

[source,c]
----------
float4 f;

// values implementation defined for
// f > INT_MAX, f < INT_MIN or NaN
int4 i = convert_int4( f );

// values > INT_MAX clamp to INT_MAX, values < INT_MIN clamp
// to INT_MIN. NaN should produce 0.
// The _rtz_ rounding mode is used to produce the integer values.
int4 i2 = convert_int4_sat( f );

// similar to convert_int4, except that floating-point values
// are rounded to the nearest integer instead of truncated
int4 i3 = convert_int4_rte( f );

// similar to convert_int4_sat, except that floating-point values
// are rounded to the nearest integer instead of truncated
int4 i4 = convert_int4_sat_rte( f );
----------

Example 3:

[source,c]
----------
int4 i;

// convert ints to floats using the default rounding mode.
float4 f = convert_float4( i );

// convert ints to floats. integer values that cannot
// be exactly represented as floats should round up to the
// next representable float.
float4 f = convert_float4_rtp( i );
----------


[[reinterpreting-data-as-another-type]]
=== Reinterpreting Data As Another Type

It is frequently necessary to reinterpret bits in a data type as another
data type in OpenCL.
This is typically required when direct access to the bits in a
floating-point type is needed, for example to mask off the sign bit or make
use of the result of a vector <<operators-relational,relational operator>>
on floating-point data footnote:[{fn-float-reinterpretation}].
Several methods to achieve this (non-) conversion are frequently practiced
in C, including pointer aliasing, unions and memcpy.
Of these, only memcpy is strictly correct in C99.
Since OpenCL does not provide *memcpy*, other methods are needed.

[[reinterpreting-types-using-unions]]
==== Reinterpreting Types Using Unions

The OpenCL language extends the union to allow the program to access a
member of a union object using a member of a different type.
The relevant bytes of the representation of the object are treated as an
object of the type used for the access.
If the type used for access is larger than the representation of the object,
then the value of the additional bytes is undefined.

Examples:

[source,c]
----------
// d only if double precision is supported
union { float f; uint u; double d; } u;

u.u = 1;    // u.f contains 2**-149.  u.d is undefined --
            // depending on endianness the low or high half
            // of d is unknown

u.f = 1.0f; // u.u contains 0x3f800000, u.d contains an
            // undefined value -- depending on endianness
            // the low or high half of d is unknown

u.d = 1.0;  // u.u contains 0x3ff00000 (big endian) or 0
            // (little endian). u.f contains either 0x1.ep0f
            // (big endian) or 0.0f (little endian)
----------


[[reinterpreting-types-using-as_type-and-as_typen]]
==== Reinterpreting Types Using *as_type*() and *as_type__n__*()

[open,refpage='as_typen',desc='Reinterpreting Types',type='freeform',spec='clang',anchor='reinterpreting-types-using-as_type-and-as_typen',xrefs='convert_T scalarDataTypes vectorDataTypes']
--
All data types described in <<table-builtin-scalar-types>> and
<<table-builtin-vector-types>> (except `bool`, `void`, and `half`
footnote:[{fn-cl_khr_fp16}]) may be also reinterpreted as another data type of
the same size using the *as_type*() operator for scalar data types and the
*as_type__n__*() operator footnote:[{fn-reinterpret-vector-types}] for vector
data types.
When the operand and result type contain the same number of elements, the
bits in the operand shall be returned directly without modification as the
new type.
The usual type promotion for function arguments shall not be performed.

For example, `*as_float*(0x3f800000)` returns `1.0f`, which is the value
that the bit pattern `0x3f800000` has if viewed as an IEEE-754 single
precision value.

When the operand and result type contain a different number of elements, the
result shall be implementation-defined except if the operand is a
4-component vector and the result is a 3-component vector.
In this case, the bits in the operand shall be returned directly without
modification as the new type.
That is, a conforming implementation shall explicitly define a behavior, but
two conforming implementations need not have the same behavior when the
number of elements in the result and operand types does not match.
The implementation may define the result to contain all, some or none of the
original bits in whatever order it chooses.
It is an error to use *as_type*() or *as_type__n__*() operator to
reinterpret data to a type of a different number of bytes.

Examples:

[source,c]
----------
float f = 1.0f;
uint u = as_uint(f); // Legal. Contains:  0x3f800000

float4 f = (float4)(1.0f, 2.0f, 3.0f, 4.0f);
// Legal. Contains:
// (int4)(0x3f800000, 0x40000000, 0x40400000, 0x40800000)
int4 i = as_int4(f);

float4 f, g;
int4  is_less = f < g;

// Legal. f[i] = f[i] < g[i] ? f[i] : 0.0f
f = as_float4(as_int4(f) & is_less);

int i;
// Legal. Result is implementation-defined.
short2 j = as_short2(i);

int4 i;
// Legal. Result is implementation-defined.
short8 j = as_short8(i);

float4 f;
// Error. Result and operand have different sizes
double4 g = as_double4(f); // Only if double precision is supported.

float4 f;
// Legal. g.xyz will have same values as f.xyz. g.w is undefined
float3 g = as_float3(f);
----------
--


[[pointer-casting]]
=== Pointer Casting

Pointers to old and new types may be cast back and forth to each other.
Casting a pointer to a new type represents an unchecked assertion that the
address is correctly aligned.
The developer will also need to know the endianness of the OpenCL device and
the endianness of the data to determine how the scalar and vector data
elements are stored in memory.


[[usual-arithmetic-conversions]]
=== Usual Arithmetic Conversions

Many operators that expect operands of arithmetic type cause conversions and
yield result types in a similar way.
The purpose is to determine a common real type for the operands and result.
For the specified operands, each operand is converted, without change of
type domain, to a type whose corresponding real type is the common real
type.
For this purpose, all vector types shall be considered to have higher
conversion ranks than scalars.
Unless explicitly stated otherwise, the common real type is also the
corresponding real type of the result, whose type domain is the type domain
of the operands if they are the same, and complex otherwise.
This pattern is called the usual arithmetic conversions.
If the operands are of more than one vector type, then an error shall occur.
<<implicit-conversions,Implicit conversions>> between vector types are not
permitted.

Otherwise, if there is only a single vector type, and all other operands are
scalar types, the scalar types are converted to the type of the vector
element, then widened into a new vector containing the same number of
elements as the vector, by duplication of the scalar value across the width
of the new vector.
An error shall occur if any scalar operand has greater rank than the type of
the vector element.
For this purpose, the rank order defined as follows:

  . The rank of a floating-point type is greater than the rank of another
    floating-point type, if the first floating-point type can exactly
    represent all numeric values in the second floating-point type.
    (For this purpose, the encoding of the floating-point value is used,
    rather than the subset of the encoding usable by the device.)
  . The rank of any floating-point type is greater than the rank of any
    integer type.
  . The rank of an integer type is greater than the rank of an integer type
    with less precision.
  . The rank of an unsigned integer type is *greater than* the rank of a
    signed integer type with the same precision
    footnote:[{fn-integer-conversion-rank}].
  . The rank of the bool type is less than the rank of any other type.
  . The rank of an enumerated type shall equal the rank of the compatible
    integer type.
  . For all types, `T1`, `T2` and `T3`, if `T1` has greater rank than `T2`,
    and `T2` has greater rank than `T3`, then `T1` has greater rank than
    `T3`.

Otherwise, if all operands are scalar, the usual arithmetic conversions
apply, per <<C99-spec,section 6.3.1.8 of the C99 Specification>>.

[NOTE]
====
Both the standard orderings in <<C99-spec,sections 6.3.1.8 and 6.3.1.1 of
the C99 Specification>> were examined and rejected.
Had we used integer conversion rank here, `int4 + 0U` would have been legal
and had `int4` return type.
Had we used standard C99 usual arithmetic conversion rules for scalars, then
the standard integer promotion would have been performed on vector integer
element types and `short8 + char` would either have return type of `int8` or
be illegal.
====


[[operators]]
== Operators

ifdef::refpageOnly[]
// This is an index page, generated only in the OpenCL refpages and not in
// the Specification. It's here so the index remains consistent with the
// spec.
[open,refpage='operators',desc='OpenCL Operators',type='freeform',spec='clang',anchor='operators',xrefs='']
--
OpenCL C includes a variety of operators, described individually in the
following sections:

  * link:arithmeticOperators.html[Arithmetic Operators]
  * link:unaryOperators.html[Unary Operators]
  * link:prePostOperators.html[Pre- and Post-Operators]
  * link:relationalOperators.html[Relational Operators]
  * link:equalityOperators.html[Equality Operators]
  * link:bitwiseOperators.html[Bitwise Operators]
  * link:logicalOperators.html[Logical Operators]
  * link:unaryLogicalOperator.html[Unary Logical Operator]
  * link:selectionOperator.html[Ternary Selection Operator]
  * link:shiftOperators.html[Shift Operators]
  * link:sizeofOperator.html[Sizeof Operator]
  * link:commaOperator.html[Comma Operator]
  * link:indirectionOperator.html[Indirection Operator]
  * link:addressOperator.html[Address Operator]
  * link:assignmentOperator.html[Assignment Operator]
--
endif::refpageOnly[]


[[operators-arithmetic]]
=== Arithmetic Operators

[open,refpage='arithmeticOperators',desc='Arithmetic Operators',type='freeform',spec='clang',anchor='operators-arithmetic',xrefs='operators']
--
The arithmetic operators add (*+++*), subtract (*-*), multiply (*+*+*) and
divide (*/*) operate on built-in integer and floating-point scalar, and
vector data types.
The arithmetic operator remainder (*%*) operates on built-in integer scalar
and integer vector data types.
All arithmetic operators return result of the same built-in type (integer or
floating-point) as the type of the operands, after operand type conversion.
After conversion, the following cases are valid:

  * The two operands are scalars.
    In this case, the operation is applied, resulting in a scalar.
  * One operand is a scalar, and the other is a vector.
    In this case, the scalar may be subject to the usual arithmetic
    conversion to the element type used by the vector operand.
    The scalar type is then widened to a vector that has the same number of
    components as the vector operand.
    The operation is done component-wise resulting in the same size vector.
  * The two operands are vectors of the same type.
    In this case, the operation is done component-wise resulting in the same
    size vector.

All other cases of implicit conversions are illegal.
Division on integer types which results in a value that lies outside of the
range bounded by the maximum and minimum representable values of the integer
type will not cause an exception but will result in an unspecified value.
A divide by zero with integer types does not cause an exception but will
result in an unspecified value.
Division by zero for floating-point types will result in {plusmn}{inf} or
NaN as prescribed by the IEEE-754 standard.
Use the built-in functions *dot* and *cross* to get, respectively, the
vector dot product and the vector cross product.
--


[[operators-unary]]
=== Unary Operators

[open,refpage='unaryOperators',desc='Unary Operators',type='freeform',spec='clang',anchor='operators-unary',xrefs='operators']
--
The arithmetic unary operators (*+* and *-*) operate on built-in scalar and
vector types.
--


[[operators-prepost]]
=== Pre- and Post-Operators

[open,refpage='prePostOperators',desc='Pre- and Post-Operators',type='freeform',spec='clang',anchor='operators-prepost',xrefs='operators']
--
The arithmetic post- and pre-increment and decrement operators (*--* and
*++*) operate on built-in scalar and vector types except the built-in scalar
and vector `float` types footnote:[{fn-float-increment-decrement}].
All unary operators work component-wise on their operands.
These result with the same type they operated on.
For post- and pre-increment and decrement, the expression must be one that
could be assigned to (an l-value).
Pre-increment and pre-decrement add or subtract 1 to the contents of the
expression they operate on, and the value of the pre-increment or
pre-decrement expression is the resulting value of that modification.
Post-increment and post-decrement expressions add or subtract 1 to the
contents of the expression they operate on, but the resulting expression has
the expression's value before the post-increment or post-decrement was
executed.
--


[[operators-relational]]
=== Relational Operators

[open,refpage='relationalOperators',desc='Relational Operators',type='freeform',spec='clang',anchor='operators-relational',xrefs='operators']
--
The relational operators greater than (*>*), less than (*<*), greater than or
equal (*>=*), and less than or equal (*\<=*) operate on scalar and vector types
footnote:[{fn-relational-any-all}].
All relational operators result in an integer type.
After operand type conversion, the following cases are valid:

  * The two operands are scalars.
    In this case, the operation is applied, resulting in an `int` scalar.
  * One operand is a scalar, and the other is a vector.
    In this case, the scalar may be subject to the usual arithmetic
    conversion to the element type used by the vector operand.
    The scalar type is then widened to a vector that has the same number of
    components as the vector operand.
    The operation is done component-wise resulting in the same size vector.
  * The two operands are vectors of the same type.
    In this case, the operation is done component-wise resulting in the same
    size vector.

All other cases of implicit conversions are illegal.

The result is a scalar signed integer of type `int` if the source operands
are scalar and a vector signed integer type of the same size as the source
operands if the source operands are vector types.
Vector source operands of type `char__n__` and `uchar__n__` return a
`char__n__` result; vector source operands of type `short__n__` and
`ushort__n__` return a `short__n__` result; vector source operands of type
`int__n__`, `uint__n__` and `float__n__` return an `int__n__` result; vector
source operands of type `long__n__`, `ulong__n__` and `double__n__` return a
`long__n__` result.
For scalar types, the relational operators shall return 0 if the specified
relation is _false_ and 1 if the specified relation is _true_.
For vector types, the relational operators shall return 0 if the specified
relation is _false_ and -1 (i.e. all bits set) if the specified relation is
_true_.
The relational operators always return 0 if either argument is not a number
(NaN).
--


[[operators-equality]]
=== Equality Operators

[open,refpage='equalityOperators',desc='Equality Operators',type='freeform',spec='clang',anchor='operators-equality',xrefs='operators']
--
The equality operators equal (*==*) and not equal (*!=*) operate on
built-in scalar and vector types footnote:[{fn-relational-any-all}].
All equality operators result in an integer type.
After operand type conversion, the following cases are valid:

  * The two operands are scalars.
    In this case, the operation is applied, resulting in a scalar.
  * One operand is a scalar, and the other is a vector.
    In this case, the scalar may be subject to the usual arithmetic
    conversion to the element type used by the vector operand.
    The scalar type is then widened to a vector that has the same number of
    components as the vector operand.
    The operation is done component-wise resulting in the same size vector.
  * The two operands are vectors of the same type.
    In this case, the operation is done component-wise resulting in the same
    size vector.

All other cases of implicit conversions are illegal.

The result is a scalar signed integer of type `int` if the source operands
are scalar and a vector signed integer type of the same size as the source
operands if the source operands are vector types.
Vector source operands of type `char__n__` and `uchar__n__` return a
`char__n__` result; vector source operands of type `short__n__` and
`ushort__n__` return a `short__n__` result; vector source operands of type
`int__n__`, `uint__n__` and `float__n__` return an `int__n__` result; vector
source operands of type `long__n__`, `ulong__n__` and `double__n__` return a
`long__n__` result.

For scalar types, the equality operators return 0 if the specified relation
is _false_ and return 1 if the specified relation is _true_.
For vector types, the equality operators shall return 0 if the specified
relation is _false_ and -1 (i.e. all bits set) if the specified relation is
_true_.
The equality operator equal (*==*) returns 0 if one or both arguments are
not a number (NaN).
The equality operator not equal (*!=*) returns 1 (for scalar source
operands) or -1 (for vector source operands) if one or both arguments are
not a number (NaN).
--


[[operators-bitwise]]
=== Bitwise Operators

[open,refpage='bitwiseOperators',desc='Bitwise Operators',type='freeform',spec='clang',anchor='operators-bitwise',xrefs='operators']
--
The bitwise operators and (*&*), or (*|*), exclusive or (*^*), and not
(*+~+*) operate on all scalar and vector built-in types except the built-in
scalar and vector `float` types.
For vector built-in types, the operators are applied component-wise.
If one operand is a scalar and the other is a vector, the scalar may be
subject to the usual arithmetic conversion to the element type used by the
vector operand.
The scalar type is then widened to a vector that has the same number of
components as the vector operand.
The operation is done component-wise resulting in the same size vector.
--


[[operators-logical]]
=== Logical Operators

[open,refpage='logicalOperators',desc='Logical Operators',type='freeform',spec='clang',anchor='operators-logical',xrefs='operators']
--
The logical operators and (*&&*) and or (*||*) operate on all scalar and
vector built-in types.
For scalar built-in types only, and (*&&*) will only evaluate the right hand
operand if the left hand operand compares unequal to 0.
For scalar built-in types only, or (*||*) will only evaluate the right hand
operand if the left hand operand compares equal to 0.
For built-in vector types, both operands are evaluated and the operators are
applied component-wise.
If one operand is a scalar and the other is a vector, the scalar may be
subject to the usual arithmetic conversion to the element type used by the
vector operand.
The scalar type is then widened to a vector that has the same number of
components as the vector operand.
The operation is done component-wise resulting in the same size vector.

The logical operator exclusive or (*^^*) is reserved.

The result is a scalar signed integer of type `int` if the source operands
are scalar and a vector signed integer type of the same size as the source
operands if the source operands are vector types.
Vector source operands of type `char__n__` and `uchar__n__` return a
`char__n__` result; vector source operands of type `short__n__` and
`ushort__n__` return a `short__n__` result; vector source operands of type
`int__n__`, `uint__n__` and `float__n__` return an `int__n__` result; vector
source operands of type `long__n__`, `ulong__n__` and `double__n__` return a
`long__n__` result.

For scalar types, the logical operators shall return 0 if the result of the
operation is _false_ and 1 if the result is _true_.
For vector types, the logical operators shall return 0 if the result of the
operation is _false_ and -1 (i.e. all bits set) if the result is _true_.
--


[[operators-logical-unary]]
=== Unary Logical Operator

[open,refpage='unaryLogicalOperator',desc='Unary Logical Operator',type='freeform',spec='clang',anchor='operators-logical-unary',xrefs='operators']
--
The logical unary operator not (*!*) operates on all scalar and vector
built-in types.
For built-in vector types, the operators are applied component-wise.

The result is a scalar signed integer of type `int` if the source operands
are scalar and a vector signed integer type of the same size as the source
operands if the source operands are vector types.
Vector source operands of type `char__n__` and `uchar__n__` return a
`char__n__` result; vector source operands of type `short__n__` and
`ushort__n__` return a `short__n__` result; vector source operands of type
`int__n__`, `uint__n__` and `float__n__` return an `int__n__` result; vector
source operands of type `long__n__`, `ulong__n__` and `double__n__` return a
`long__n__` result.

For scalar types, the result of the logical unary operator is 0 if the value
of its operand compares unequal to 0, and 1 if the value of its operand
compares equal to 0.
For vector types, the unary operator shall return a 0 if the value of its
operand compares unequal to 0, and -1 (i.e. all bits set) if the value of
its operand compares equal to 0.
--


[[operators-ternary-selection]]
=== Ternary Selection Operator

[open,refpage='selectionOperator',desc='Ternary Selection Operator',type='freeform',spec='clang',anchor='operators-ternary-selection',xrefs='operators']
--
The ternary selection operator (*?:*) operates on three expressions (_exp1_
*?* _exp2_ *:* _exp3_).
This operator evaluates the first expression _exp1_, which can be a scalar
or vector result except `float`.
If all three expressions are scalar values, the C99 rules for ternary
operator are followed.
If the result is a vector value, then this is equivalent to calling
*select*(_exp3_, _exp2_, _exp1_).
The *select* function is described in <<table-builtin-relational>>.
The second and third expressions can be any type, as long their types match,
or there is an <<implicit-conversions,implicit conversion>> that can be
applied to one of the expressions to make their types match, or one is a
vector and the other is a scalar and the scalar may be subject to the usual
arithmetic conversion to the element type used by the vector operand and
widened to the same type as the vector type.
This resulting matching type is the type of the entire expression.
--


[[operators-shift]]
=== Shift Operators

[open,refpage='shiftOperators',desc='Shift Operators',type='freeform',spec='clang',anchor='operators-shift',xrefs='operators']
--
The operators right-shift (*>>*), left-shift (*<<*) operate on all scalar
and vector built-in types except the built-in scalar and vector `float`
types.
For built-in vector types, the operators are applied component-wise.
For the right-shift (*>>*), left-shift (*<<*) operators, the rightmost
operand must be a scalar if the first operand is a scalar, and the rightmost
operand can be a vector or scalar if the first operand is a vector.

The result of `E1` *<<* `E2` is `E1` left-shifted by log~2~(N) least significant
bits in `E2` viewed as an unsigned integer value, where N is the number of bits
used to represent the data type of `E1` after integer promotion
footnote:[{fn-integer-promotion}], if `E1` is a scalar, or the number of bits
used to represent the type of `E1` elements, if `E1` is a vector.
The vacated bits are filled with zeros.

The result of `E1` *>>* `E2` is `E1` right-shifted by log~2~(N) least
significant bits in `E2` viewed as an unsigned integer value, where N is the
number of bits used to represent the data type of `E1` after integer
promotion, if `E1` is a scalar, or the number of bits used to represent the
type of `E1` elements, if `E1` is a vector.
If `E1` has an unsigned type or if `E1` has a signed type and a nonnegative
value, the vacated bits are filled with zeros.
If `E1` has a signed type and a negative value, the vacated bits are filled
with ones.
--


[[operators-sizeof]]
=== Sizeof Operator

[open,refpage='sizeofOperator',desc='Sizeof Operator',type='freeform',spec='clang',anchor='operators-sizeof',xrefs='operators']
--
The `sizeof` operator yields the size (in bytes) of its operand, including
any <<alignment-of-types,padding bytes needed for alignment>>, which may be
an expression or the parenthesized name of a type.
The size is determined from the type of the operand.
The result is of type `size_t`.
If the type of the operand is a variable length array
footnote:[{fn-variable-length-array-restriction}] type, the operand is
evaluated; otherwise, the operand is not evaluated and the result is an integer
constant.

When applied to an operand that has type `char` or `uchar`, the result is 1.
When applied to an operand that has type `short`, `ushort`, or `half` the
result is 2.
When applied to an operand that has type `int`, `uint` or `float`, the
result is 4.
When applied to an operand that has type `long`, `ulong` or `double`, the
result is 8.
When applied to an operand that is a vector type, the result is the number of
components times the size of each scalar component footnote:[{fn-vec3-size}].
When applied to an operand that has array type, the result is the total
number of bytes in the array.
When applied to an operand that has structure or union type, the result is
the total number of bytes in such an object, including internal and trailing
padding.
The `sizeof` operator shall not be applied to an expression that has
function type or an incomplete type, to the parenthesized name of such a
type, or to an expression that designates a bit-field struct member
footnote:[{fn-bitfield-struct-restriction}].

The behavior of applying the `sizeof` operator to the `bool`, `image2d_t`,
`image3d_t`, `image2d_array_t`, `image1d_t`, `image1d_buffer_t`,
`image1d_array_t`, `image2d_depth_t`, `image2d_array_depth_t`,
`sampler_t`, `queue_t, `ndrange_t`, `clk_event_t`, `reserve_id_t`, and
`event_t` types is implementation-defined.
--


[[operators-comma]]
=== Comma Operator

[open,refpage='commaOperator',desc='Comma Operator',type='freeform',spec='clang',anchor='operators-comma',xrefs='operators']
--
The comma (*,*) operator operates on expressions by returning the type and
value of the right-most expression in a comma separated list of expressions.
All expressions are evaluated, in order, from left to right.
--


[[operators-indirection]]
=== Indirection Operator

[open,refpage='indirectionOperator',desc='Indirection Operator',type='freeform',spec='clang',anchor='operators-indirection',xrefs='operators']
--
The unary (*+*+*) operator denotes indirection.
If the operand points to an object, the result is an l-value designating the
object.
If the operand has type "pointer to __type__", the result has type
"__type__".
If an invalid value has been assigned to the pointer, the behavior of the unary
*+*+* operator is undefined footnote:[{fn-pointer-invalid-value-indirection}].
--


[[operators-address]]
=== Address Operator

[open,refpage='addressOperator',desc='Address Operator',type='freeform',spec='clang',anchor='operators-address',xrefs='operators']
--
The unary (*&*) operator returns the address of its operand.
If the operand has type "__type__", the result has type "pointer to
__type__".
If the operand is the result of a unary *+*+* operator, neither that operator
nor the *&* operator is evaluated and the result is as if both were omitted,
except that the constraints on the operators still apply and the result is
not an l-value.
Similarly, if the operand is the result of a *[]* operator, neither the *&*
operator nor the unary *+*+* that is implied by the *[]* is evaluated and the
result is as if the *&* operator were removed and the *[]* operator were
changed to a *+* operator.
Otherwise, the result is a pointer to the object designated by its
operand footnote:[{fn-address-operator-result}].
--


[[operators-assignment]]
=== Assignment Operator

[open,refpage='assignmentOperator',desc='Assignment Operator',type='freeform',spec='clang',anchor='operators-assignment',xrefs='operators']
--
Assignments of values to variable names are done with the assignment
operator (*=*), like

[none]
* _lvalue_ = _expression_

The assignment operator stores the value of _expression_ into _lvalue_.
The _expression_ and _lvalue_ must have the same type, or the expression
must have a type in <<table-builtin-scalar-types>>, in which case an
implicit conversion will be done on the expression before the assignment is
done.

If _expression_ is a scalar type and _lvalue_ is a vector type, the scalar
is converted to the element type used by the vector operand.
The scalar type is then widened to a vector that has the same number of
components as the vector operand.
The operation is done component-wise resulting in the same size vector.

Any other desired type-conversions must be specified explicitly.
L-values must be writable.
Variables that are built-in types, entire structures or arrays, structure
fields, l-values with the field selector (*.*) applied to select components
or swizzles without repeated fields, l-values within parentheses, and
l-values dereferenced with the array subscript operator (*[]*) are all
l-values.
Other binary or unary expressions, function names, swizzles with repeated
fields, and constants cannot be l-values.
The ternary operator (*?:*) is also not allowed as an l-value.

The order of evaluation of the operands is unspecified.
If an attempt is made to modify the result of an assignment operator or to
access it after the next sequence point, the behavior is undefined.
Other assignment operators are the assignments add into (**+=**), subtract
from (*-=*), multiply into (*=*), divide into (*/=*), modulus into (*%=*),
left shift by (*<\<=*), right shift by (*>>=*), and into (*&=*), inclusive
or into (*|=*), and exclusive or into (*^=*).

The expression

[none]
* _lvalue_ __op__ *=* _expression_

is equivalent to

[none]
* _lvalue_ = _lvalue_ _op_ _expression_

and the _lvalue_ and _expression_ must satisfy the requirements for both
operator _op_ and assignment (*=*).

[NOTE]
====
Except for the `sizeof` operator, the `half` data type cannot be used with
any of the operators described in this section.
====
--


[[vector-operations]]
== Vector Operations

Vector operations are component-wise.
Usually, when an operator operates on a vector, it is operating
independently on each component of the vector, in a component-wise fashion.

For example,

[source,c]
----------
float4 v, u;
float f;

v = u + f;
----------

will be equivalent to

[source,c]
----------
v.x = u.x + f;
v.y = u.y + f;
v.z = u.z + f;
v.w = u.w + f;
----------

And

[source,c]
----------
float4 v, u, w;

w = v + u;
----------

will be equivalent to

[source,c]
----------
w.x = v.x + u.x;
w.y = v.y + u.y;
w.z = v.z + u.z;
w.w = v.w + u.w;
----------

and likewise for most operators and all integer and floating-point vector
types.


[[address-space-qualifiers]]
== Address Space Qualifiers

[open,refpage='addressSpaceQualifiers',desc='Address Space Qualifiers',type='freeform',spec='clang',anchor='address-space-qualifiers',xrefs='constant genericAddressSpace global local private']
--

OpenCL implements the following disjoint named address spaces: `+__global+`,
`+__local+`, `+__constant+` and `+__private+`.
The address space qualifier may be used in variable declarations to specify
the region of memory that is used to allocate the object.
The C syntax for type qualifiers is extended in OpenCL to include an address
space name as a valid type qualifier.
If the type of an object is qualified by an address space name, the object
is allocated in the specified address space name.

The address space names without the `+__+` prefix, i.e. `global`, `local`,
`constant` and `private`, may be substituted for the corresponding address
space names with the `+__+` prefix.

The address space name for arguments to a function in a program, or local
variables of a function is `+__private+`.
All function arguments shall be in the `+__private+` address space.

Additionally, all function return values shall be in the `+__private+` address space.

For OpenCL C 2.0, or OpenCL 3.0 or newer with the
`+__opencl_c_program_scope_global_variables+` feature, the address space for a
variable at program scope or a `static` or `extern` variable inside a function
may be either `+__constant+` or `+__global+`,
and the address space defaults to `+__global+` if not specified.
Otherwise, the address space for a variable at program scope or a `static` or `extern`
variable inside a function must explicitly be `+__constant+`.

Examples:

[source,c]
----------
// declares a pointer p in the global address space that
// points to an object in the global address space
global int *p;

void foo (...)
{
    // declares an array of 4 floats in the private address space
    float x[4];
    ...
}
----------

For OpenCL C 2.0, or with the `+__opencl_c_generic_address_space+` feature,
there is an additional unnamed generic address space. The unnamed generic
address space overlaps the named `+__global+`, `+__local+`, and `+__private+
address spaces. The unnamed generic address space does not overlap the named
`+__constant+` address space; the named `+__constant+` address space is not in
the generic address space.

If the generic address space is supported,
pointers that are declared without pointing to a named address space point
to the generic address space.
Otherwise, when the generic address space is not supported, pointers that
are declared without pointing to a named address space point to the
`+__private+` address space.

Kernel function arguments declared to be a pointer or an array of a type
must point to one of the named address spaces `+__global+`, `+__local+` or
`+__constant+`.

A pointer to address space A can be assigned to a pointer to the same
address space A or be implicitly converted and assigned to a pointer
to the generic address space.
Casting a pointer to address space A to a pointer to address space B is
illegal if A and B are named address spaces and A is not the same as B.

Examples:

[source,c]
----------
// OK.
int f() { ... }

// Error. Address space qualifier cannot be used with non-pointer return type.
private int f() { ... }

// OK. Address space qualifier can be used with pointer return type.
local int *f() { ... }
----------

The `+__global+`, `+__constant+`, `+__local+`, `+__private+`, `global`,
`constant`, `local`, and `private` names are reserved for use as address
space qualifiers and shall not be used otherwise.
The `+__generic+` and `generic` names are reserved for future use.

[NOTE]
====
The size of pointers to different address spaces may differ.
It is not correct to assume that, for example, `+sizeof(__global int *)+`
always equals `+sizeof(__local int *)+`.
====
--


[[global-or-global]]
=== `+__global+` (or `global`)

[open,refpage='global',desc='global Address Space Qualifiers',type='freeform',spec='clang',anchor='global-or-global',xrefs='addressSpaceQualifiers constant genericAddressSpace local private']
--

The `+__global+` or `global` address space name is used to refer to memory
objects (buffer or image objects) allocated from the `global` memory pool.

A buffer memory object can be declared as a pointer to a scalar, vector or
user-defined struct.
This allows the kernel to read and/or write any location in the buffer.

The actual size of the array memory object is determined when the memory
object is allocated via appropriate API calls in the host code.

Some examples are:

[source,c]
----------
global float4 *color; // An array of float4 elements

typedef struct {
    float a[3];
    int b[2];
} foo_t;

global foo_t *my_info; // An array of foo_t elements.
----------

As image objects are always allocated from the `global` address space, the
`+__global+` or `global` qualifier should not be specified for image types.
The elements of an image object cannot be directly accessed.
Built-in functions to read from and write to an image object are provided.

For OpenCL C 2.0, or with the `+__opencl_c_program_scope_global_variables+`
feature,
variables defined at program scope and `static` variables inside a function
can also be declared in the `global` address space.
They can be defined with any valid OpenCL C data type except for those in
<<table-other-builtin-types>>.
Such program scope variables may be of any user-defined type,
or a pointer to a user-defined type.
In the presence of shared virtual memory, these pointers or pointer members
should work as expected as long as they are shared virtual memory pointers
and the referenced storage has been mapped appropriately.
These variables in the `global` address space have the same lifetime as the
program, and their values persist between calls to any of the kernels in the
program.
These variables are not shared across devices.
They have distinct storage.

Program scope and `static` variables in the `global` address space are zero
initialized by default. A constant expression may be given as an initializer.

Examples:

[source,c]
----------
// Note: these examples assume OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_program_scope_global_variables feature.

global int foo;         // OK.
int foo;                // OK. Declared in the global address space.
global uchar buf[512];  // OK.
global int baz = 12;    // OK. Initialization is allowed.
static global int bat;  // OK. Internal linkage.

static int foo;         // OK. Declared in the global address space.
static global int foo;  // OK.

int *foo;               // OK. foo is allocated in the global address space.
                        // foo points to a location in the private or
                        // generic address space.

void func(...)
{
    int *foo;           // OK. foo is allocated in the private address space.
                        // foo points to a location in the private or
                        // generic address space.
    ...
}

global int * global ptr;          // OK.
int * global ptr;                 // OK.
constant int *global ptr=&baz;    // Error, baz is in the global address
                                  // space.
global int * constant ptr = &baz; // OK

global image2d_t im;    // Error. Invalid type for program scope variables.

global event_t ev;      // Error. Invalid type for program scope variables.
----------

The `const` qualifier can also be used with the `+__global+` qualifier to
specify a read-only buffer memory object.
--


[[local-or-local]]
=== `+__local+` (or `local`)

[open,refpage='local',desc='local Address Space Qualifiers',type='freeform',spec='clang',anchor='local-or-local',xrefs='addressSpaceQualifiers constant genericAddressSpace global private']
--

The `+__local+` or `local` address space name is used to describe variables
that need to be allocated in local memory and are shared by all work-items
of a work-group.
Pointers to the `+__local+` address space are allowed as arguments to
functions (including kernel functions).
Variables declared in the `+__local+` address space inside a kernel function
must occur at kernel function scope.

Some examples of variables allocated in the `+__local+` address space inside
a kernel function are:

[source,c]
----------
kernel void my_func(...)
{
    local float a;     // A single float allocated
                       // in local address space

    local float b[10]; // An array of 10 floats
                       // allocated in local address space.

    if (...)
    {
        // example of variable in __local address space but not
        // declared at __kernel function scope.
        local float c; // not allowed.
    }
}
----------

Variables allocated in the `+__local+` address space inside a kernel
function cannot be initialized.

[source,c]
----------
kernel void my_func(...)
{
    local float a = 1; // not allowed

    local float b;
    b = 1;             // allowed
}
----------

[NOTE]
====
Variables allocated in the `+__local+` address space inside a kernel
function are allocated for each work-group executing the kernel and exist
only for the lifetime of the work-group executing the kernel.
====
--


[[constant-or-constant]]
=== `+__constant+` (or `constant`)

[open,refpage='constant',desc='constant Address Space Qualifiers',type='freeform',spec='clang',anchor='constant-or-constant',xrefs='addressSpaceQualifiers genericAddressSpace global local private']
--

The `+__constant+` or `constant` address space name is used to describe
variables allocated in `global` memory and which are accessed inside a
kernel(s) as read-only variables.
These read-only variables can be accessed by all (global) work-items of the
kernel during its execution.
Pointers to the `+__constant+` address space are allowed as arguments to
functions (including kernel functions) and for variables declared inside
functions.

All string literal storage shall be in the `+__constant+` address space.

[NOTE]
====
Each argument to a kernel that is a pointer to the `+__constant+` address
space is counted separately towards the maximum number of such arguments,
defined as the value of the <<opencl-device-queries,
`CL_DEVICE_MAX_CONSTANT_ARGS` device query>>.
====

Variables in the program scope can be declared in the `+__constant+` address
space.
Variables in the outermost scope of kernel functions can be declared in the
`+__constant+` address space.
These variables are required to be initialized and the values used to
initialize these variables must be a compile time constant.
Writing to such a variable results in a compile-time error.

Implementations are not required to aggregate these declarations into the
fewest number of constant arguments.
This behavior is implementation defined.

Thus portable code must conservatively assume that each variable declared
inside a function or in program scope allocated in the `+__constant+`
address space counts as a separate constant argument.
--


[[private-or-private]]
=== `+__private+` (or `private`)

[open,refpage='private',desc='private Address Space Qualifiers',type='freeform',spec='clang',anchor='private-or-private',xrefs='addressSpaceQualifiers constant genericAddressSpace global local']
--

Variables inside a kernel function not declared with an address space
qualifier, all variables inside non-kernel functions, and all function
arguments are in the `+__private+` or `private` address space.
--


[[the-generic-address-space]]
=== The Generic Address Space

[open,refpage='genericAddressSpace',desc='The Generic Address Space',type='freeform',spec='clang',anchor='the-generic-address-space',xrefs='addressSpaceQualifiers constant global local private']
--

NOTE: The functionality described in this section <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and the
`+__opencl_c_generic_address_space+` feature.

The following rules apply when using pointers that point to the generic
address space:

  * A pointer that points to the `global`, `local` or `private` address
    space can be implicitly converted to a pointer to the unnamed generic
    address space but not vice-versa.
  * Pointer casts can be used to cast a pointer that points to the `global`,
    `local` or `private` space to the unnamed generic address space and
    vice-versa.
  * A pointer that points to the `constant` address space cannot be cast or
    implicitly converted to the generic address space.

A few examples follow.

This is the canonical example.
In this example, function `foo` is declared with an argument that is a
pointer with no address space qualifier.

[source,c]
----------
void foo(int *a)
{
    *a = *a + 2;
}

kernel void k1(local int *a)
{
    ...
    foo(a);
    ...
}

kernel void k2(global int *a)
{
    ...
    foo(a);
    ...
}
----------

In the example below, `var` is a pointer to the unnamed generic address space.
A pointer to the `global` or `local` address space may be assigned to `var`
depending on the result of a conditional expression.

[source,c]
----------
kernel void bar(global int *g, local int *l)
{
    int *var;

    if (is_even(get_global_id(0))
        var = g;
    else
        var = l;
    *var = 42;
    ...
}
----------

In the example below, the same pointer to the unnamed generic address
space is used to point to objects allocated in different named address spaces.
A pointer to the unnamed generic address space may point to
objects in the `global`, `local`, and `private` address spaces,
but it is not legal for a pointer to the unnamed generic address to
point to an object in the `constant` address space.

[source,c]
----------
int *ptr;
global int g;
ptr = &g; // legal

local int l;
ptr = &l; // legal

private int p;
ptr = &p; // legal

constant int c;
ptr = &c; // illegal
----------

In the example below, pointers to named address spaces are assigned to
a pointer to the unnamed generic address space.
It is legal to assign a pointer to the `global`, `local`, and `private`
address spaces to a pointer to the unnamed generic address space without
an explicit cast.
It is not legal to assign a pointer to the `constant` address space to
a pointer to the unnamed generic address space.
It is also not legal to assign a pointer to the unnamed generic address
space to a pointer to a named address space without a cast.

[source,c]
----------
global int *gp;
local int *lp;
private int *pp;
constant int *cp;

int *p;
p = gp; // legal
p = lp; // legal
p = pp; // legal
p = cp; // illegal

// it is illegal to convert from a generic pointer
// to an explicit address space pointer without a cast:
gp = p; // compile-time error
lp = p; // compile-time error
pp = p; // compile-time error
cp = p; // compile-time error
----------
--


// Formerly "Changes to ISO/IEC 9899:1999"

[[changes-to-C99]]
=== Changes to C99

This section details the modifications to the <<C99-spec, C99
Specification>> needed to incorporate the functionality of named address
space and the generic address space:

*Clause 6.2.5 - Types, replace paragraph 26 with the following paragraphs*:

If type `T` is qualified by the address space qualifier for address space
`A`, then " `T` is in `A` ".
If type `T` is in address space `A`, a pointer to `T` is also a " pointer
into `A` " and the referenced address space of the pointer is `A`.

A pointer to `void` in any address space shall have the same representation
and alignment requirements as a pointer to a character type in the same
address space.
Similarly, pointers to differently access-qualified versions of compatible
types shall have the same representation and alignment requirements.
All pointers to structure types in the same address space shall have the
same representation and alignment requirements as each other.
All pointers to union types in the same address space shall have the same
representation and alignment requirements as each other.

*Clause 6.3.2.3 - Pointers, replace the first two paragraphs with the
following paragraphs*:

If a pointer into one address space is converted to a pointer into another
address space, then unless the original pointer is a null pointer or the
location referred to by the original pointer is within the second address
space, the behavior is undefined.
(For the original pointer to refer to a location within the second address
space, the two address spaces must overlap).

A pointer to `void` in any address space may be converted to or from a
pointer to any incomplete or object type.
A pointer to any incomplete or object type in some address space may be
converted to a pointer to `void` in an enclosing address space and back
again; the result shall compare equal to the original pointer.

For any qualifier _q_, a pointer to a non-_q_-qualified type may be
converted to a pointer to the _q_-qualified version of the type (but with
the same address-space qualifier or the generic address space); the values
stored in the original and converted pointers shall compare equal.

*Clause 6.3.2.3 - Pointers, replace the last sentence of paragraph 4 with*:

Conversion of a null pointer to another pointer type yields a null pointer
of that type.
Any two null pointers whose referenced address spaces overlap shall compare
equal.

*Clause 6.5.2.2 - Function calls, change the second bullet of paragraph 6
to*:

both types are pointers to qualified or unqualified versions of a character
type or `void` in the same address space or one type is a pointer in a named
address space and the other is a pointer in the generic address space.

*Clause 6.5.6 - Additive operators, add another constraint paragraph*:

For subtraction, if the two operands are pointers into different address
spaces, the address spaces must overlap.

*Clause 6.5.8 - Relational operators, add another constraint paragraph*:

If the two operands are pointers into different address spaces, the address
spaces must overlap.

*Clause 6.5.8 - Relational operators, add a new paragraph between existing
paragraphs 3 and 4*:

If the two operands are pointers into different address spaces, one of the
address spaces encloses the other.
The pointer into the enclosed address space is first converted to a pointer
to the same reference type except with any address-space qualifier removed
and any address-space qualifier of the other pointer's reference type added.
(After this conversion, both pointers are pointers into the same address
space).

Examples:

[source,c]
----------
kernel void test1()
{
    global int arr[5] = { 0, 1, 2, 3, 4 };
    int *p = &arr[1];
    global int *q = &arr[3];

    // q implicitly converted to the generic address space
    // since the generic address space encloses the global
    // address space
    if (q >= p)
        printf("true\n");

    // q implicitly converted to the generic address space
    // since the generic address space encloses the global
    // address space
    if (p <= q)
        printf("true\n");
}
----------

*Clause 6.5.9 - Equality operators, add another constraint paragraph*:

If the two operands are pointers into different address spaces, the address
spaces must overlap.

*Clause 6.5.9 - Equality operators, replace paragraph 5 with*:

Otherwise, at least one operand is a pointer.
If one operand is a pointer and the other is a null pointer constant, the
null pointer constant is converted to the type of the pointer.
If both operands are pointers, each of the following conversions is
performed as applicable:

  * If the two operands are pointers into different address spaces, one of
    the address spaces encloses the other.
    The pointer into the enclosed address space is first converted to a
    pointer to the same reference type except with any address-space
    qualifier removed and any address-space qualifier of the other pointer's
    reference type added.
    (After this conversion, both pointers are pointers into the same address
    space).
  * Then, if one operand is a pointer to an object or incomplete type and
    the other is a pointer to a qualified or unqualified version of `void`,
    the former is converted to the type of the latter.

Examples:

[source,c]
----------
int *ptr = NULL;
local int lval = SOME_VAL;
local int *lptr = &lval;
global int gval = SOME_OTHER_VAL;
global int *gptr = &gval;

ptr = lptr;

if (ptr == gptr) // legal
{
    ...
}

if (ptr == lptr) // legal
{
    ...
}

if (lptr == gptr) // illegal, compiler error
{
    ...
}
----------

Consider the following example:

[source,c]
----------
bool callee(int *p1, int *p2)
{
    if (p1 == p2)
        return true;
    return false;
}

void caller()
{
    global int *gptr = 0xdeadbeef;
    private int *pptr = 0xdeadbeef;

    // behavior of callee is undefined
    bool b = callee(gptr, pptr);
}
----------

The behavior of callee is undefined as gptr and pptr are in different
address spaces.
The example above would have the same undefined behavior if the equality
operator is replaced with a relational operator.

Examples:

[source,c]
----------
int *ptr = NULL;
local int *lptr = NULL;
global int *gptr = NULL;

if (ptr == NULL) // legal
{
    ...
}

if (ptr == lptr) // legal
{
    ...
}

if (lptr == gptr) // compile-time error
{
    ...
}

ptr = lptr; // legal

intptr l = (intptr_t)lptr;
if (l == 0) // legal
{
    ...
}

if (l == NULL) // legal
{
    ...
}
----------

*Clause 6.5.9 - Equality operators, replace first sentence of paragraph 6
with*:

Two pointers compare equal if and only if both are null pointers with
overlapping address spaces.

*Clause 6.5.15 - Conditional operator, add another constraint paragraph*:

If the second and third operands are pointers into different address spaces,
the address spaces must overlap.

Examples:

[source,c]
----------
kernel void test1()
{
    global int arr[5] = { 0, 1, 2, 3, 4 };
    int *p = &arr[1];
    global int *q = &arr[3];
    local int *r = NULL;
    int *val = NULL;

    // legal. 2nd and 3rd operands are in address spaces
    // that overlap
    val = (q >= p) ? q : p;

    // compiler error. 2nd and 3rd operands are in disjoint
    // address spaces
    val = (q >= p) ? q : r;
}
----------

*Clause 6.5.16.1 - Simple assignment, change the third and fourth bullets of
paragraph 1 to*:

  - both operands are pointers to qualified or unqualified versions of
    compatible types, the referenced address space of the left encloses the
    referenced address space of the right, and the type pointed to by the
    left has all the qualifiers of the type pointed to by the right.
  - one operand is a pointer to an object or incomplete type and the other
    is a pointer to a qualified or unqualified version of `void`, the
    referenced address space of the left encloses the referenced address
    space of the right, and the type pointed to by the left has all the
    qualifiers of the type pointed to by the right.

Examples:

[source,c]
----------
kernel void f()
{
int *ptr;
local int *lptr;
global int *gptr;
local int val = 55;

ptr = &val;  // legal: implicit cast to generic, then assign
lptr = ptr;  // illegal: no implicit cast from
             // generic to local
lptr = gptr; // illegal: no implicit cast from
             // global to local
ptr = gptr;  // legal: implicit cast from global to generic,
             // then assign
}
----------

*Clause 6.7.2.1 - Structure and union specifiers, add a new constraint
paragraph*:

Within a structure or union specifier, the type of a member shall not be
qualified by an address space qualifier.

*Clause 6.7.3 - Type qualifiers, add three new constraint paragraphs*:

No type shall be qualified by qualifiers for two or more different address
spaces.


[[access-qualifiers]]
== Access Qualifiers

[open,refpage='accessQualifiers',desc='Access Qualifiers',type='freeform',spec='clang',anchor='access-qualifiers',xrefs='kernel optionalAttributeQualifiers']
--

Image objects specified as arguments to a kernel can be declared to be
read-only or write-only.

For OpenCL C 2.0, or with the `+__opencl_c_read_write_images+` feature,
image objects specified as arguments to a kernel can additionally be
declared to be read-write.

The `+__read_only+` (or `read_only`) access qualifier specifies that the
image object is only being read by a kernel or function.
The `+__write_only+` (or `write_only`) access qualifier specifies that the
image object is only being written to by a kernel or function.
The `+__read_write+` (or `read_write`) access qualifier specifies that the
image object may be both read from or written to by a kernel or function.

The default access qualifier is `read_only`, if no access qualifier is declared.

In the following example

[source,c]
----------
kernel void
foo (read_only image2d_t imageA,
     write_only image2d_t imageB)
{
    ...
}
----------

imageA is a read-only 2D image object, and image is a write-only 2D image
object.

The sampler-less read image and write image built-ins can be used with image
declared with the `+__read_write+` (or `read_write`) qualifier.
Calls to built-ins that read from an image using a sampler for images
declared with the `+__read_write+` (or `read_write`) qualifier will be a
compilation error.

Pipe objects specified as arguments to a kernel also use these access
qualifiers.
See the <<pipe-functions,detailed description on how these access qualifiers
can be used with pipes>>.

The `+__read_only+`, `+__write_only+`, `+__read_write+`, `read_only`,
`write_only` and `read_write` names are reserved for use as access
qualifiers and shall not be used otherwise.
--


[[function-qualifiers]]
== Function Qualifiers


[[kernel-or-kernel]]
=== `+__kernel+` (or `kernel`)

[open,refpage='kernel',desc='Qualifiers for Kernel Functions',type='freeform',spec='clang',anchor='kernel-or-kernel',xrefs='accessQualifiers optionalAttributeQualifiers',alias='functionQualifiers']
--

The `+__kernel+` (or `kernel`) qualifier declares a function to be a kernel
that can be executed by an application on an OpenCL device(s).
The following rules apply to functions that are declared with this
qualifier:

  * It can be executed on the device only
  * It can be called by the host
  * It is just a regular function call if a `+__kernel+` function is called
    by another kernel function.

[NOTE]
====
Kernel functions with variables declared inside the function with the
`+__local+` or `local` qualifier can be called by the host using appropriate
APIs such as *clEnqueueNDRangeKernel*.
====

The `+__kernel+` and `kernel` names are reserved for use as functions
qualifiers and shall not be used otherwise.
--


[[optional-attribute-qualifiers]]
=== Optional Attribute Qualifiers

[open,refpage='optionalAttributeQualifiers',desc='Optional Attribute Qualifiers',type='freeform',spec='clang',anchor='optional-attribute-qualifiers',xrefs='accessQualifiers kernel',alias='reqd_work_group_size vec_type_hint work_group_size_hint']
--

The `+__kernel+` qualifier can be used with the keyword __attribute__ to
declare additional information about the kernel function as described below.

The optional `+__attribute__((vec_type_hint(<type>)))+`
footnote:[{fn-vec-type-hint}] is a hint to the compiler and is intended to be a
representation of the computational _width_ of the `+__kernel+`, and should
serve as the basis for calculating processor bandwidth utilization when the
compiler is looking to autovectorize the code.
In the `+__attribute__((vec_type_hint(<type>)))+` qualifier <type> is one of
the built-in vector types listed in <<table-builtin-vector-types>> or the
constituent scalar element types.
If `vec_type_hint (<type>)` is not specified, the kernel is assumed to have
the `+__attribute__((vec_type_hint(int)))+` qualifier.

For example, where the developer specified a width of `float4`, the compiler
should assume that the computation usually uses up to 4 lanes of a `float`
vector, and would decide to merge work-items or possibly even separate one
work-item into many threads to better match the hardware capabilities.
A conforming implementation is not required to autovectorize code, but shall
support the hint.
A compiler may autovectorize, even if no hint is provided.
If an implementation merges N work-items into one thread, it is responsible
for correctly handling cases where the number of `global` or `local`
work-items in any dimension modulo N is not zero.

Examples:

[source,c]
----------
// autovectorize assuming float4 as the
// basic computation width
__kernel __attribute__((vec_type_hint(float4)))
void foo( __global float4 *p ) { ... }

// autovectorize assuming double as the
// basic computation width
__kernel __attribute__((vec_type_hint(double)))
void foo( __global float4 *p ) { ... }

// autovectorize assuming int (default)
// as the basic computation width
__kernel
void foo( __global float4 *p ) { ... }
----------

If for example, a `+__kernel+` function is declared with

[none]
* `+__attribute__(( vec_type_hint (float4)))+`

(meaning that most operations in the `+__kernel+` function are explicitly
vectorized using `float4`) and the kernel is running using Intel^{reg}^
Advanced Vector Instructions (Intel^{reg}^ AVX) which implements a
8-float-wide vector unit, the autovectorizer might choose to merge two
work-items to one thread, running a second work-item in the high half of the
256-bit AVX register.

As another example, a Power4 machine has two scalar double precision
floating-point units with an 6-cycle deep pipe.
An autovectorizer for the Power4 machine might choose to interleave six
kernels declared with the `+__attribute__(( vec_type_hint (double2)))+`
qualifier into one hardware thread, to ensure that there is always 12-way
parallelism available to saturate the FPUs.
It might also choose to merge 4 or 8 work-items (or some other number) if it
concludes that these are better choices, due to resource utilization
concerns or some preference for divisibility by 2.

The optional `+__attribute__((work_group_size_hint(X, Y, Z)))+` is a hint to
the compiler and is intended to specify the work-group size that may be used
i.e. value most likely to be specified by the _local_work_size_ argument to
*clEnqueueNDRangeKernel*.
For example, the `+__attribute__((work_group_size_hint(1, 1, 1)))+` is a
hint to the compiler that the kernel will most likely be executed with a
work-group size of 1.

The optional `+__attribute__((reqd_work_group_size(X, Y, Z)))+` is the
work-group size that must be used as the _local_work_size_ argument to
*clEnqueueNDRangeKernel*.
This allows the compiler to optimize the generated code appropriately for
this kernel.

If `Z` is one, the _work_dim_ argument to *clEnqueueNDRangeKernel* can be 2
or 3.
If `Y` and `Z` are one, the _work_dim_ argument to *clEnqueueNDRangeKernel*
can be 1, 2 or 3.
--


[[storage-class-specifiers]]
== Storage-Class Specifiers

[open,refpage='storageSpecifiers',desc='Storage-Class Specifiers',type='freeform',spec='clang',anchor='storage-class-specifiers',alias='typedef extern static']
--

The `typedef` storage-class specifier is supported.
The `extern` and `static` storage-class specifiers are supported but
<<unified-spec, require>> support for OpenCL C 1.2 or newer.
The `auto` and `register` storage-class specifiers are not supported.

The `extern` storage-class specifier can only be used for functions (kernel
and non-kernel functions) and `global` variables declared in program scope
or variables declared inside a function (kernel and non-kernel functions).
The `static` storage-class specifier can only be used for non-kernel
functions, `global` variables declared in program scope and variables inside
a function declared in the `global` or `constant` address space.

Examples:

[source,c]
----------
extern constant float4 noise_table[256];
static constant float4 color_table[256];

extern kernel void my_foo(image2d_t img);
extern void my_bar(global float *a);

kernel void my_func(image2d_t img, global float *a)
{
    extern constant float4 a;
    static constant float4 b = (float4)(1.0f); // OK.
    static float c;  // Error: No implicit address space
    global int hurl; // Error: Must be static
    ...
    my_foo(img);
    ...
    my_bar(a);
    ...
    while (1)
    {
        static global int inside; // OK.
        ...
    }
    ...
}
----------
--


[[restrictions]]
== Restrictions

[open,refpage='restrictions',desc='Restrictions',type='freeform',spec='clang',anchor='restrictions']
--

[loweralpha]
  . The use of pointers is somewhat restricted.
    The following rules apply:
    * Arguments to kernel functions declared in a program that are pointers
      must be declared with the `+__global+`, `+__constant+` or `+__local+`
      qualifier.
    * A pointer declared with the `+__constant+` qualifier can only be
      assigned to a pointer declared with the `+__constant+` qualifier
      respectively.
    * Pointers to functions are not allowed.
    * Arguments to kernel functions in a program cannot be
      declared as a pointer to a pointer(s).
      Variables inside a function or arguments to non-kernel functions in a
      program can be declared as a pointer to a pointer(s).
      This restriction only applies to OpenCL C 1.2 or below.
  . An image type (`image2d_t`, `image3d_t`, `image2d_array_t`, `image1d_t`,
    `image1d_buffer_t` or `image1d_array_t`) can only be used as the type of
    a function argument.
    An image function argument cannot be modified.
    Elements of an image can only be accessed using the built-in
    <<image-read-and-write-functions,image read and write functions>>.
+
An image type cannot be used to declare a variable, a structure or union
field, an array of images, a pointer to an image, or the return type of a
function.
An image type cannot be used with the `+__global+`, `+__private+`,
`+__local+` and `+__constant+` address space qualifiers.
+
The sampler type (`sampler_t`) can only be used as the type of a function
argument or a variable declared in the program scope or the outermost scope
of a kernel function.
The behavior of a sampler variable declared in a non-outermost scope of a
kernel function is implementation-defined.
A sampler argument or variable cannot be modified.
+
The sampler type cannot be used to declare a structure or union field, an
array of samplers, a pointer to a sampler, or the return type of a function.
The sampler type cannot be used with the `+__local+` and `+__global+`
address space qualifiers.
  . [[restrictions-bitfield]] Bit-field struct members are currently not
    supported.
  . [[restrictions-variable-length]] Variable length arrays and structures
    with flexible (or unsized) arrays are not supported.
  . Variadic functions are not supported, with the exception of `printf` and
    `enqueue_kernel`.
  . Variadic macros are not supported.
    This restriction only applies to OpenCL C 2.0 or below.
  . If a list of parameters in a function declaration is empty, the function
    takes no arguments. This is due to the above restriction on variadic
    functions.
  . Unless defined in the OpenCL specification, the library functions,
    macros, types, and constants defined in the C99 standard headers
    `assert.h`, `ctype.h`, `complex.h`, `errno.h`, `fenv.h`, `float.h`,
    `inttypes.h`, `limits.h`, `locale.h`, `setjmp.h`, `signal.h`,
    `stdarg.h`, `stdio.h`, `stdlib.h`, `string.h`, `tgmath.h`, `time.h`,
    `wchar.h` and `wctype.h` are not available and cannot be included by a
    program.
  . The `auto` and `register` storage-class specifiers are not supported.
  . Predefined identifiers are not supported.
    This restriction only applies to OpenCL C 1.1 or below.
  . Recursion is not supported.
  . The return type of a kernel function must be `void`.
  . Arguments to kernel functions in a program cannot be declared with the
    built-in scalar types `bool`, `size_t`, `ptrdiff_t`, `intptr_t`, and
    `uintptr_t` or a struct and/or union that contain fields declared to be
    one of these built-in scalar types.
    The size in bytes of these types are implementation-defined and in
    addition can also be different for the OpenCL device and the host
    processor making it difficult to allocate buffer objects to be passed as
    arguments to a kernel declared as pointer to these types.
  . `half` is not supported as `half` can be used as a storage format
    footnote:[{fn-cl_khr_fp16}] only and is not a data type on which
    floating-point arithmetic can be performed.
  . Whether or not irreducible control flow is illegal is implementation
    defined.
  . The following restriction only applies to OpenCL C 1.0, also see the
    *cl_khr_byte_addressable_store* extension.
    Built-in types that are less than 32-bits in size, i.e.
    `char`, `uchar`, `char2`, `uchar2`, `short`, `ushort`, and `half`, have
    the following restriction:
+
    * Writes to a pointer (or arrays) of type `char`,
      `uchar`, `char2`, `uchar2`, `short`, `ushort`, and `half` or to
      elements of a struct that are of type `char`, `uchar`, `char2`,
      `uchar2`, `short` and `ushort` are not supported.
      Refer to _section 9.9_ for additional information.
+
The kernel example below shows what memory operations are not supported on
built-in types less than 32-bits in size.
+
[source,c]
----------
kernel void
do_proc (__global char *pA, short b,
         __global short *pB)
{
    char x[100];
    __private char *px = x;
    int id = (int)get_global_id(0);
    short f;

    f = pB[id] + b; // is allowed
    px[1] = pA[1]; // error. px cannot be written.
    pB[id] = b; // error. pB cannot be written
}
----------
  . The type qualifiers `const`, `restrict` and `volatile` as defined by the
    C99 specification are supported.
    These qualifiers cannot be used with `image2d_t`, `image3d_t`,
    `image2d_array_t`, `image2d_depth_t`, `image2d_array_depth_t`,
    `image1d_t`, `image1d_buffer_t` and `image1d_array_t` types.
    Types other than pointer types shall not use the `restrict` qualifier.
  . The event type (`event_t`) cannot be used as the type of a kernel
    function argument.
    The event type cannot be used to declare a program scope variable.
    The event type cannot be used to declare a structure or union field.
    The event type cannot be used with the `+__local+`, `+__constant+` and
    `+__global+` address space qualifiers.
  . The `clk_event_t`, `ndrange_t` and `reserve_id_t` types cannot be used
    as arguments to kernel functions that get enqueued from the host.
    The `clk_event_t` and `reserve_id_t` types cannot be declared in program
    scope.
  . Kernels enqueued by the host must continue to have their arguments that
    are a pointer to a type declared to point to a named address space.
  . A function in an OpenCL program cannot be called `main`.
  . Implicit function declaration is not supported.
--


[[preprocessor-directives-and-macros]]
== Preprocessor Directives and Macros

[open,refpage='preprocessorDirectives',desc='Preprocessor Directives and Macros',type='freeform',spec='clang',anchor='preprocessor-directives-and-macros',xrefs='clBuildProgram mathConstants EXTENSION FP_CONTRACT']
--

The preprocessing directives defined by the C99 specification are supported.

The *#pragma* directive is described as:

[none]
* *#pragma* _pp-tokens~opt~_ _new-line_

A *#pragma* directive where the preprocessing token `OPENCL` (used instead
of *`STDC`*) does not immediately follow *pragma* in the directive (prior to
any macro replacement) causes the implementation to behave in an
implementation-defined manner.
The behavior might cause translation to fail or cause the translator or the
resulting program to behave in a non-conforming manner.
Any such *pragma* that is not recognized by the implementation is ignored.
If the preprocessing token `OPENCL` does immediately follow *#pragma* in the
directive (prior to any macro replacement), then no macro replacement is
performed on the directive, and the directive shall have one of the
following forms whose meanings are described elsewhere:

[source,c]
----------
// on-off-switch is one of ON, OFF, or DEFAULT
#pragma OPENCL FP_CONTRACT on-off-switch

#pragma OPENCL EXTENSION extensionname : behavior

#pragma OPENCL EXTENSION all : behavior
----------

The following predefined macro names are available.

`+__FILE__+` ::
    The presumed name of the current source file (a character string
    literal).

`+__LINE__+` ::
    The presumed line number (within the current source file) of the current
    source line (an integer constant).

`+__OPENCL_VERSION__+` ::
    Substitutes an integer reflecting the version number of the OpenCL
    supported by the OpenCL device.
    The version of OpenCL described in this document will have
    `+__OPENCL_VERSION__+` substitute the integer 300.

`CL_VERSION_1_0` ::
    Substitutes the integer 100 reflecting the OpenCL 1.0 version.
    <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.

`CL_VERSION_1_1` ::
    Substitutes the integer 110 reflecting the OpenCL 1.1 version.
    <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.

`CL_VERSION_1_2` ::
    Substitutes the integer 120 reflecting the OpenCL 1.2 version.
    <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.

`CL_VERSION_2_0` ::
    Substitutes the integer 200 reflecting the OpenCL 2.0 version.
    <<unified-spec, Requires>> support for OpenCL C 2.0 or newer.

`CL_VERSION_3_0` ::
    Substitutes the integer 300 reflecting the OpenCL 3.0 version.
    <<unified-spec, Requires>> support for OpenCL C 3.0 or newer.

`+__OPENCL_C_VERSION__+` ::
    Substitutes an integer reflecting the OpenCL C version specified by the
    `-cl-std` build option (see <<opencl-spec,OpenCL Specification>>) to
    *clBuildProgram* or *clCompileProgram*.
    If the `-cl-std` build option is not specified, the highest OpenCL C 1.x
    language version supported by each device is used as the version of
    OpenCL C when compiling the program for each device.
    <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.

`+__ROUNDING_MODE__+` ::
    Used to determine the current rounding mode and is set to rte.
    Only affects the rounding mode of conversions to a float type.
    <<unified-spec, Deprecated by>> OpenCL C 1.1, along with the
    *cl_khr_select_fprounding_mode* extension.

`+__ENDIAN_LITTLE__+` ::
    Used to determine if the OpenCL device is a little endian architecture
    or a big endian architecture (an integer constant of 1 if device is
    little endian and is undefined otherwise).
    Also refer to the value of the <<opencl-device-queries,
    `CL_DEVICE_ENDIAN_LITTLE` device query>>.

`+__kernel_exec(X, typen)+` (and `kernel_exec(X, typen)`) ::
    is defined as:

[source,c]
----------
__kernel __attribute__((work_group_size_hint(X, 1, 1))) \
    __attribute__((vec_type_hint(typen)))
----------

`+__IMAGE_SUPPORT__+` ::
    Used to determine if the OpenCL device supports images.
    This is an integer constant of 1 if images are supported and is
    undefined otherwise.
    Also refer to the value of the <<opencl-device-queries,
    `CL_DEVICE_IMAGE_SUPPORT` device query>> and the `+__opencl_c_images+`
    feature.

`+__FAST_RELAXED_MATH__+` ::
    Used to determine if the `-cl-fast-relaxed-math` optimization option is
    specified in build options given to *clBuildProgram* or
    *clCompileProgram*.
    This is an integer constant of 1 if the `-cl-fast-relaxed-math` build
    option is specified and is undefined otherwise.

The `NULL` macro expands to a null pointer constant.
An integer constant expression with the value 0, or such an expression cast
to type `void *` is called a _null pointer constant_.
<<unified-spec, Requires>> support for OpenCL C 2.0 or newer.

The macro names defined by the C99 specification but not currently supported
by OpenCL are reserved for future use.

The predefined identifier `+__func__+` is available.
<<unified-spec, Requires>> support for OpenCL C 1.2 or newer.

In OpenCL C 3.0 or newer there are a number of optional predefined macros
indicating optional language features. Such macros are listed in the
<<table-optional-lang-features, optional features in OpenCL C 3.0 table>>.
--


[[attribute-qualifiers]]
== Attribute Qualifiers

// [open,refpage='attribute',desc='Attribute Qualifiers',type='freeform',spec='clang',anchor='attribute-qualifiers',xrefs='attributes-types attributes-variables attributes-blocksAndControlFlow attributes-loopUnroll']
// --

This section describes the syntax with which `+__attribute__+` may be used,
and the constructs to which attribute specifiers bind.

An attribute specifier is of the form

`+__attribute__ ((_attribute-list_))+`.

An attribute list is defined as:

[role="bnf"]
--
_attribute-list_ : ::
    _attribute~opt~_ +
    _attribute-list_ , _attribute~opt~_

_attribute_ : ::
    _attribute-token_ _attribute-argument-clause~opt~_

_attribute-token_ : ::
    _identifier_

_attribute-argument-clause_ : ::
    ( _attribute-argument-list_ )

_attribute-argument-list_ : ::
    _attribute-argument_ +
    _attribute-argument-list_ , _attribute-argument_

_attribute-argument_ : ::
    _assignment-expression_
--

This syntax is taken directly from GCC but unlike GCC, which allows
attributes to be applied only to functions, types, and variables, OpenCL
attributes can be associated with:

  * types;
  * functions;
  * variables;
  * blocks; and
  * control-flow statements.

In general, the rules for how an attribute binds, for a given context, are
non-trivial and the reader is pointed to GCC's documentation and Maurer and
Wong's paper [See 16.
and 17.
in _section 11_ - *References*] for the details.

// -- end 'attribute' open block

[[specifying-attributes-of-types]]
=== Specifying Attributes of Types

[open,refpage='attributes-types',desc='Specifying Attribute of Types',type='freeform',spec='clang',anchor='specifying-attributes-of-types']
--

The keyword `+__attribute__+` allows you to specify special attributes of
enum, struct and union types when you define such types.
This keyword is followed by an attribute specification inside double
parentheses.
Two attributes are currently defined for types: aligned, and packed.

You may specify type attributes in an enum, struct or union type declaration
or definition, or for other types in a `typedef` declaration.

For an enum, struct or union type, you may specify attributes either between
the enum, struct or union tag and the name of the type, or just past the
closing curly brace of the _definition_.
The former syntax is preferred.

`aligned (_alignment_)` ::
+
--
This attribute specifies a minimum alignment (in bytes) for variables of the
specified type.
For example, the declarations:

[source,c]
----------
struct S { short f[3]; } __attribute__ ((aligned (8)));
typedef int more_aligned_int __attribute__ ((aligned (8)));
----------

force the compiler to insure (as far as it can) that each variable whose
type is `struct S` or `more_aligned_int` will be allocated and aligned _at
least_ on a 8-byte boundary.

Note that the alignment of any given struct or union type is required by the
ISO C standard to be at least a perfect multiple of the lowest common
multiple of the alignments of all of the members of the struct or union in
question and must also be a power of two.
This means that you _can_ effectively adjust the alignment of a struct or
union type by attaching an aligned attribute to any one of the members of
such a type, but the notation illustrated in the example above is a more
obvious, intuitive, and readable way to request the compiler to adjust the
alignment of an entire struct or union type.

As in the preceding example, you can explicitly specify the alignment (in
bytes) that you wish the compiler to use for a given struct or union type.
Alternatively, you can leave out the alignment factor and just ask the
compiler to align a type to the maximum useful alignment for the target
machine you are compiling for.
For example, you could write:

[source,c]
----------
struct S { short f[3]; } __attribute__ ((aligned));
----------

Whenever you leave out the alignment factor in an aligned attribute
specification, the compiler automatically sets the alignment for the type to
the largest alignment which is ever used for any data type on the target
machine you are compiling for.
In the example above, the size of each `short` is 2 bytes, and therefore the
size of the entire `struct S` type is 6 bytes.
The smallest power of two which is greater than or equal to that is 8, so
the compiler sets the alignment for the entire `struct S` type to 8 bytes.

Note that the effectiveness of aligned attributes may be limited by inherent
limitations of the OpenCL device and compiler.
For some devices, the OpenCL compiler may only be able to arrange for
variables to be aligned up to a certain maximum alignment.
If the OpenCL compiler is only able to align variables up to a maximum of 8
byte alignment, then specifying `aligned(16)` in an `+__attribute__+` will
still only provide you with 8 byte alignment.
See your platform-specific documentation for further information.

The aligned attribute can only increase the alignment; but you can decrease
it by specifying packed as well.
See below.
--

`packed` ::
+
--
This attribute, attached to struct or union type definition, specifies that
each member of the structure or union is placed to minimize the memory
required.
When attached to an enum definition, it indicates that the smallest integral
type should be used.

Specifying this attribute for struct and union types is equivalent to
specifying the packed attribute on each of the structure or union members.

In the following example, the members of `my_packed_struct` are packed
closely together, but the internal layout of its `s` member is not packed.
To do that, struct `my_unpacked_struct` would need to be packed, too.

[source,c]
----------
struct my_unpacked_struct
{
    char c;
    int i;
};

struct __attribute__ ((packed)) my_packed_struct
{
    char c;
    int i;
    struct my_unpacked_struct s;
};
----------

You may only specify this attribute on the definition of a enum, struct or
union, not on a `typedef` which does not also define the enumerated type,
structure or union.
--
--

[[specifying-attributes-of-functions]]
=== Specifying Attributes of Functions

See <<function-qualifiers,Function Qualifiers>> for the function attribute
qualifiers currently supported.


[[specifying-attributes-of-variables]]
=== Specifying Attributes of Variables

[open,refpage='attributes-variables',desc='Specifying Attribute of Variables',type='freeform',spec='clang',anchor='specifying-attributes-of-variables']
--

The keyword `+__attribute__+` allows you to specify special attributes of
variables or structure fields.
This keyword is followed by an attribute specification inside double
parentheses.
The following attribute qualifiers are currently defined:

`aligned (_alignment_)` ::

This attribute specifies a minimum alignment for the variable or structure
field, measured in bytes.
For example, the declaration:
+
[source,c]
----------
int x __attribute__ ((aligned (16))) = 0;
----------
+
causes the compiler to allocate the global variable `x` on a 16-byte
boundary.
The alignment value specified must be a power of two.
+
You can also specify the alignment of structure fields.
For example, to create a double-word aligned `int` pair, you could write:
+
[source,c]
----------
struct foo { int x[2] __attribute__ ((aligned (8))); };
----------
+
This is an alternative to creating a union with a `double` member that
forces the union to be double-word aligned.
+
As in the preceding examples, you can explicitly specify the alignment (in
bytes) that you wish the compiler to use for a given variable or structure
field.
Alternatively, you can leave out the alignment factor and just ask the
compiler to align a variable or field to the maximum useful alignment for
the target machine you are compiling for.
For example, you could write:
+
[source,c]
----------
short array[3] __attribute__ ((aligned));
----------
+
Whenever you leave out the alignment factor in an aligned attribute
specification, the OpenCL compiler automatically sets the alignment for the
declared variable or field to the largest alignment which is ever used for
any data type on the target device you are compiling for.
+
When used on a struct, or struct member, the aligned attribute can only
increase the alignment; in order to decrease it, the packed attribute must
be specified as well.
When used as part of a `typedef`, the aligned attribute can both increase
and decrease alignment, and specifying the packed attribute will generate a
warning.
+
Note that the effectiveness of aligned attributes may be limited by inherent
limitations of the OpenCL device and compiler.
For some devices, the OpenCL compiler may only be able to arrange for
variables to be aligned up to a certain maximum alignment.
If the OpenCL compiler is only able to align variables up to a maximum of 8
byte alignment, then specifying `aligned(16)` in an `+__attribute__+` will
still only provide you with 8 byte alignment.
See your platform-specific documentation for further information.

`packed` ::

The packed attribute specifies that a variable or structure field should
have the smallest possible alignment -- one byte for a variable, unless you
specify a larger value with the aligned attribute.
+
Here is a structure in which the field `x` is packed, so that it immediately
follows a:
+
[source,c]
----------
struct foo
{
    char a;
    int x[2] __attribute__ ((packed));
};
----------
+
An attribute list placed at the beginning of a user-defined type applies to
the variable of that type and not the type, while attributes following the
type body apply to the type.
+
For example:
+
[source,c]
----------
/* a has alignment of 128 */
__attribute__((aligned(128))) struct A {int i;} a;

/* b has alignment of 16 */
__attribute__((aligned(16))) struct B {double d;}
__attribute__((aligned(32))) b ;

struct A a1; /* a1 has alignment of 4 */

struct B b1; /* b1 has alignment of 32 */
----------

`endian (_endiantype_)` ::

The endian attribute determines the byte ordering of a variable.
_endiantype_ can be set to `host` indicating the variable uses the
endianness of the host processor or can be set to `device` indicating the
variable uses the endianness of the device on which the kernel will be
executed.
The default is `device`.
+
For example:
+
[source,c]
----------
global float4 *p __attribute__ ((endian(host)));
----------
+
specifies that data stored in memory pointed to by p will be in the host
endian format.
+
The endian attribute can only be applied to pointer types that are in the
`global` or `constant` address space.
The endian attribute cannot be used for variables that are not a pointer
type.
The endian attribute value for both pointers must be the same when one
pointer is assigned to another.

`nosvm` ::
The `nosvm` attribute can be used with a pointer variable to inform the
compiler that the pointer does not refer to a shared virtual memory region.
<<unified-spec, Requires>> support for OpenCL C 2.0 or newer.
// __attribute__((nosvm)) was both added and deprecated in OpenCL C 2.0,
// presumably it was a later revision that deprecated the attribute.

[NOTE]
====
The `nosvm` attribute is deprecated, and the compiler can ignore it.
====

--


[[specifying-attributes-of-blocks-and-control-flow-statements]]
=== Specifying Attributes of Blocks and Control-Flow-Statements

[open,refpage='attributes-blocksAndControlFlow',desc='Specifying Attribute of Blocks and Control-Flow-Statements',type='freeform',spec='clang',anchor='specifying-attributes-of-blocks-and-control-flow-statements']
--

For basic blocks and control-flow-statements the attribute is placed before
the structure in question, for example:

[source,c]
----------
__attribute__((attr1)) {...}

for __attribute__((attr2)) (...) __attribute__((attr3)) {...}
----------

Here `attr1` applies to the block in braces and `attr2` and `attr3` apply to
the loop's control construct and body, respectively.

No attribute qualifiers for blocks and control-flow-statements are currently
defined.
--


[[specifying-attribute-for-unrolling-loops]]
=== Specifying Attribute For Unrolling Loops

[open,refpage='attributes-loopUnroll',desc='Specifying Attribute For Unrolling Loops',type='freeform',spec='clang',anchor='specifying-attribute-for-unrolling-loops']
--

The `+__attribute__((opencl_unroll_hint))+` and
`+__attribute__((opencl_unroll_hint(n)))+` attribute qualifiers can be used
to specify that a loop (for, while and do loops) can be unrolled.
This attribute qualifier can be used to specify full unrolling or partial
unrolling by a specified amount.
This is a compiler hint and the compiler may ignore this directive.

n is the loop unrolling factor and must be a positive integral compile time
constant expression.
An unroll factor of 1 disables unrolling.
If n is not specified, the compiler determines the unrolling factor for the
loop.

[NOTE]
====
The `+__attribute__((opencl_unroll_hint(n)))+` attribute qualifier must
appear immediately before the loop to be affected.
====

Examples:

[source,c]
----------
__attribute__((opencl_unroll_hint(2)))
while (*s != 0)
    *p++ = *s++;
----------

The tells the compiler to unroll the above while loop by a factor of 2.

[source,c]
----------
__attribute__((opencl_unroll_hint))
for (int i=0; i<2; i++)
{
    ...
}
----------

In the example above, the compiler will determine how much to unroll the
loop.

[source,c]
----------
__attribute__((opencl_unroll_hint(1)))
for (int i=0; i<32; i++)
{
    ...
}
----------

The above is an example where the loop should not be unrolled.

Below are some examples of invalid usage of
`+__attribute__((opencl_unroll_hint(n)))+`.

[source,c]
----------
__attribute__((opencl_unroll_hint(-1)))
while (...)
{
    ...
}
----------

The above example is an invalid usage of the loop unroll factor as the loop
unroll factor is negative.

[source,c]
----------
__attribute__((opencl_unroll_hint))
if (...)
{
    ...
}
----------

The above example is invalid because the unroll attribute qualifier is used
on a non-loop construct

[source,c]
----------
kernel void
my_kernel( ... )
{
    int x;
    __attribute__((opencl_unroll_hint(x))
    for (int i=0; i<x; i++)
    {
        ...
    }
}
----------

The above example is invalid because the loop unroll factor is not a
compile-time constant expression.
--


[[extending-attribute-qualifiers]]
=== Extending Attribute Qualifiers

The attribute syntax can be extended for standard language extensions and
vendor specific extensions.
Any extensions should follow the naming conventions outlined in the
introduction to <<opencl-extension-spec,section 9 in the OpenCL 2.0
Extension Specification>>.

Attributes are intended as useful hints to the compiler.
It is our intention that a particular implementation of OpenCL be free to
ignore all attributes and the resulting executable binary will produce the
same result.
This does not preclude an implementation from making use of the additional
information provided by attributes and performing optimizations or other
transformations as it sees fit.
In this case it is the programmer's responsibility to guarantee that the
information provided is in some sense correct.


[[blocks]]
== Blocks

[open,refpage='blocks',desc='Blocks',type='freeform',spec='clang',anchor='blocks']
--
NOTE: The functionality described in this section <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and the
`+__opencl_c_device_enqueue+` feature.

This section describes the clang block syntax
footnote:[{fn-clang-block-syntax}].

Like function types, the Block type is a pair consisting of a result value
type and a list of parameter types very similar to a function type.
Blocks are intended to be used much like functions with the key distinction
being that in addition to executable code they also contain various variable
bindings to automatic (stack) or `global` memory.
--


[[declaring-and-using-a-block]]
=== Declaring and Using a Block

You use the ^ operator to declare a Block variable and to indicate the
beginning of a Block literal.
The body of the Block itself is contained within {}, as shown in this
example (as usual with C, ; indicates the end of the statement):

The example is explained in the following illustration:

// JPG size: 556 x 228
image:images/block_example.jpg[align="center",title="Block Example"]

Notice that the Block is able to make use of variables from the same scope
in which it was defined.

If you declare a Block as a variable, you can then use it just as you would
a function:

[source,c]
----------
int multiplier = 7;

int (^myBlock)(int) = ^(int num) {
    return num * multiplier;
};

printf("%d\n", myBlock(3));
// prints 21
----------


[[declaring-a-block-reference]]
=== Declaring a Block Reference

Block variables hold references to Blocks.
You declare them using syntax similar to that you use to declare a pointer
to a function, except that you use ^ instead of *.
The Block type fully interoperates with the rest of the C type system.
The following are valid Block variable declarations:

[source,c]
----------
void (^blockReturningVoidWithVoidArgument)(void);
int (^blockReturningIntWithIntAndCharArguments)(int, char);
----------

A Block that takes no arguments must specify `void` in the argument list.
A Block reference may not be dereferenced via the pointer dereference
operation *, and thus a Block's size may not be computed at compile time.

Blocks are designed to be fully type safe by giving the compiler a full set
of metadata to use to validate use of Blocks, parameters passed to blocks,
and assignment of the return value.

You can also create types for Blocks -- doing so is generally considered to
be best practice when you use a block with a given signature in multiple
places:

[source,c]
----------
typedef float (^MyBlockType)(float, float);

MyBlockType myFirstBlock = // ...;
MyBlockType mySecondBlock = // ...;
----------


[[block-literal-expressions]]
=== Block Literal Expressions

A Block literal expression produces a reference to a Block.
It is introduced by the use of the *^* token as a unary operator.

[role="bnf"]
--
Block_literal_expression : ::
    ^ _block_decl_ _compound_statement_body_

_block_decl_ : ::
    empty +
    _parameter_list_ +
    _type_expression_
--

where _type_expression_ is extended to allow ^ as a Block reference where *
is allowed as a function reference.

The following Block literal:

[source,c]
----------
^ void (void) { printf("hello world**\n**"); }
----------

produces a reference to a Block with no arguments with no return value.

The return type is optional and is inferred from the return statements.
If the return statements return a value, they all must return a value of the
same type.
If there is no value returned the inferred type of the Block is `void`;
otherwise it is the type of the return statement value.
If the return type is omitted and the argument list is `( void )`, the `(
void )` argument list may also be omitted.

So:

[source,c]
----------
^ ( void ) { printf("hello world**\n**"); }
----------

and:

[source,c]
----------
^ { printf("hello world**\n**"); }
----------

are exactly equivalent constructs for the same expression.

The compound statement body establishes a new lexical scope within that of
its parent.
Variables used within the scope of the compound statement are bound to the
Block in the normal manner with the exception of those in automatic (stack)
storage.
Thus one may access functions and global variables as one would expect, as
well as `static` local variables.

Local automatic (stack) variables referenced within the compound statement
of a Block are imported and captured by the Block as const copies.
The capture (binding) is performed at the time of the Block literal
expression evaluation.

The compiler is not required to capture a variable if it can prove that no
references to the variable will actually be evaluated.

The lifetime of variables declared in a Block is that of a function..

Block literal expressions may occur within Block literal expressions
(nested) and all variables captured by any nested blocks are implicitly also
captured in the scopes of their enclosing Blocks.

A Block literal expression may be used as the initialization value for Block
variables at global or local `static` scope.

You can also declare a Block as a global literal in program scope.

[source,c]
----------
int GlobalInt = 0;

int (^getGlobalInt)(void) = ^{ return GlobalInt; };
----------


[[control-flow]]
=== Control Flow

The compound statement of a Block is treated much like a function body with
respect to control flow in that continue, break and goto do not escape the
Block.


[[restrictions-1]]
=== Restrictions

The following Blocks features are currently not supported in OpenCL C.

  * The `+__block+` storage type.
  * The *Block_copy*() and *Block_release*() functions that copy and release
    Blocks.
  * Blocks with variadic arguments.
  * Arrays of Blocks.
  * Blocks as structures and union members.

Block literals are assumed to allocate memory at the point of definition and
to be destroyed at the end of the same scope.
To support these behaviors, additional restrictions
footnote:[{fn-clang-block-function-pointers}] in addition to the above feature
restrictions are:

  * Block variables must be defined and used in a way that allows them to be
    statically determinable at build or "`link to executable`" time.
    In particular:
  ** Block variables assigned in one scope must be used only with the same
     or any nested scope.
  ** The `extern` storage-class specified cannot be used with program scope
     block variables.
  ** Block variable declarations are implicitly qualified with const.
     Therefore all block variables must be initialized at declaration time
     and may not be reassigned.
  ** A block cannot be a return value or a parameter of a function.
  ** Blocks cannot be used as expressions of the ternary selection operator
     (*?:*).
  * The unary operators (*+*+*) and (*&*) cannot be used with a Block.
  * Pointers to Blocks are not allowed.
  * A Block cannot capture another Block variable declared in the outer
    scope (Example 4).
  * Block capture semantics follows regular C argument passing convention,
    i.e. arrays are captured by reference (decayed to pointers) and structs
    are captured by value (Example 5).

Some examples that describe legal and illegal issue of Blocks in OpenCL C
are described below.

Example 1:

[source,c]
----------
void foo(int *x, int (^bar)(int, int))
{
    *x = bar(*x, *x);
}

kernel
void k(global int *x, global int *z)
{
    if (some expression)
        foo(x, ^int(int x, int y){return x+y+*z;}); // legal
    else
        foo(x, ^int(int x, int y){return (x*y)-*z;}); // legal
}
----------

Example 2:

[source,c]
----------
kernel
void k(global int *x, global int *z)
{
    int ^(tmp)(int, int);
    if (some expression)
    {
        tmp = ^int(int x, int y){return x+y+*z;}); // illegal
    }
    *x = foo(x, tmp);
}
----------

Example 3:

[source,c]
----------
int GlobalInt = 0;
int (^getGlobalInt)(void) = ^{ return GlobalInt; }; // legal
int (^getAnotherGlobalInt)(void);                   // illegal
extern int (^getExternGlobalInt)(void);             // illegal

void foo()

{
    ...
    getGlobalInt = ^{ return 0; }; // illegal - cannot assign to
                                   // a global block variable
    ...
}
----------

Example 4:

[source,c]
----------
void (^bl0)(void) = ^{
    ...
};

kernel void k()
{
    void(^bl1)(void) = ^{
        ...
    };

    void(^bl2)(void) = ^{
        bl0(); // legal because bl0 is a global
               // variable available in this scope
        bl1(); // illegal because bl1 would have to be captured
    };
}
----------

Example 5:

[source,c]
----------
struct v {
    int arr[2];
} s = {0, 1};

void (^bl1)() = ^(){printf("%d\n", s.arr[1]);};
// array content copied into captured struct location

int arr[2] = {0, 1};
void (^bl2)() = ^(){printf("%d\n", arr[1]);};
// array decayed to pointer while captured

s.arr[1] = arr[1] = 8;

bl1(); // prints - 1
bl2(); // prints - 8
----------


[[built-in-functions]]
== Built-in Functions

The OpenCL C programming language provides a rich set of built-in functions
for scalar and vector operations.
Many of these functions are similar to the function names provided in common
C libraries but they support scalar and vector argument types.
Applications should use the built-in functions wherever possible instead of
writing their own version.

User defined OpenCL C functions behave per C standard rules for functions as
defined in <<C99-spec,section 6.9.1 of the C99 Specification>>.
On entry to the function, the size of each variably modified parameter is
evaluated and the value of each argument expression is converted to the type
of the corresponding parameter as per the
<<usual-arithmetic-conversions,usual arithmetic conversion rules>>.
Built-in functions described in this section behave similarly, except that
in order to avoid ambiguity between multiple forms of the same built-in
function, implicit scalar widening shall not occur.
Note that some built-in functions described in this section do have forms
that operate on mixed scalar and vector types, however.


[[work-item-functions]]
=== Work-Item Functions

[open,refpage='workItemFunctions',desc='Work-Item Functions',type='freeform',spec='clang',anchor='work-item-functions',xrefs='',alias='get_enqueued_local_size get_global_id get_global_linear_id get_global_offset get_global_size get_group_id get_local_id get_local_linear_id get_local_size get_num_groups get_work_dim']
--

The following table describes the list of built-in work-item functions that
can be used to query the number of dimensions, the global and local work
size specified to *clEnqueueNDRangeKernel*, and the global and local
identifier of each work-item when this kernel is being executed on a device.

[[table-work-item-functions]]
.Built-in Work-Item Functions
[cols=",",]
|====
| *Function* | *Description*
| uint *get_work_dim*()
    | Returns the number of dimensions in use.
      This is the value given to the _work_dim_ argument specified in
      *clEnqueueNDRangeKernel*.
| size_t *get_global_size*(uint _dimindx_)
    | Returns the number of global work-items specified for dimension
      identified by _dimindx_.
      This value is given by the _global_work_size_ argument to
      *clEnqueueNDRangeKernel*.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values of _dimindx_, *get_global_size*() returns 1.
| size_t *get_global_id*(uint _dimindx_)
    | Returns the unique global work-item ID value for dimension identified
      by _dimindx_.
      The global work-item ID specifies the work-item ID based on the number
      of global work-items specified to execute the kernel.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values of _dimindx_, *get_global_id*() returns 0.
| size_t *get_local_size*(uint _dimindx_)
    | Returns the number of local work-items specified in dimension
      identified by _dimindx_.
      This value is at most the value given by the _local_work_size_
      argument to *clEnqueueNDRangeKernel* if _local_work_size_ is not
      `NULL`; otherwise the OpenCL implementation chooses an appropriate
      _local_work_size_ value which is returned by this function.
      If the kernel is executed with a non-uniform work-group size
      footnote:[{fn-non-uniform-work-groups}], calls to this built-in from some
      work-groups may return different values than calls to this built-in from
      other work-groups.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values of _dimindx_, *get_local_size*() returns 1.
| size_t *get_enqueued_local_size*(
      uint _dimindx_)
    | Returns the same value as that returned by *get_local_size*(_dimindx_)
      if the kernel is executed with a uniform work-group size.

      If the kernel is executed with a non-uniform work-group size, returns
      the number of local work-items in each of the work-groups that make up
      the uniform region of the global range in the dimension identified by
      _dimindx_.
      If the _local_work_size_ argument to *clEnqueueNDRangeKernel* is not
      `NULL`, this value will match the value specified in
      _local_work_size_[_dimindx_].
      If _local_work_size_ is `NULL`, this value will match the local size
      that the implementation determined would be most efficient at
      implementing the uniform region of the global range.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values of _dimindx_, *get_enqueued_local_size*() returns 1.

      <<unified-spec, Requires>> support for OpenCL 2.0 or newer.
| size_t *get_local_id*(uint _dimindx_)
    | Returns the unique local work-item ID, i.e. a work-item within a
      specific work-group for dimension identified by _dimindx_.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values of _dimindx_, *get_local_id*() returns 0.
| size_t *get_num_groups*(uint _dimindx_)
    | Returns the number of work-groups that will execute a kernel for
      dimension identified by _dimindx_.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values of _dimindx_, *get_num_groups*() returns 1.
| size_t *get_group_id*(uint _dimindx_)
    | *get_group_id* returns the work-group ID which is a number from 0 ..
      *get_num_groups*(_dimindx_) - 1.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values, *get_group_id*() returns 0.
| size_t *get_global_offset*(uint _dimindx_)
    | *get_global_offset* returns the offset values specified in
      _global_work_offset_ argument to *clEnqueueNDRangeKernel*.

      Valid values of _dimindx_ are 0 to *get_work_dim*() - 1.
      For other values, *get_global_offset*() returns 0.

      <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.
| size_t *get_global_linear_id*()
    | Returns the work-items 1-dimensional global ID.

      For 1D work-groups, it is computed as *get_global_id*(0) -
      *get_global_offset*(0).

      For 2D work-groups, it is computed as (*get_global_id*(1) -
      *get_global_offset*(1)) * *get_global_size*(0) {plus} (*get_global_id*(0) -
      *get_global_offset*(0)).

      For 3D work-groups, it is computed as +((+*get_global_id*(2) -
      *get_global_offset*(2)+)+ * *get_global_size*(1) * *get_global_size*(0)+)+
      {plus} +((+*get_global_id*(1) - *get_global_offset*(1)+)+ * *get_global_size*(0)+)+
      {plus} (*get_global_id*(0) - *get_global_offset*(0)+)+.

      <<unified-spec, Requires>> support for OpenCL 2.0 or newer.
| size_t *get_local_linear_id*()
    | Returns the work-items 1-dimensional local ID.

      For 1D work-groups, it is the same value as

      *get_local_id*(0).

      For 2D work-groups, it is computed as

      *get_local_id*(1) * *get_local_size*(0) {plus} *get_local_id*(0).

      For 3D work-groups, it is computed as

      (*get_local_id*(2) * *get_local_size*(1) * *get_local_size*(0)) {plus}
      (*get_local_id*(1) * *get_local_size*(0)) {plus} *get_local_id*(0).

      <<unified-spec, Requires>> support for OpenCL 2.0 or newer.
|====

NOTE: The functionality described in the following table <<unified-spec,
requires>> support for OpenCL C 3.0 or newer and the `+__opencl_c_subgroups+`
feature.

The following table describes the list of built-in work-item functions that
can be used to query the size of a subgroup, number of subgroups per work-group,
and identifier of the subgroup within a work-group and work-item within a
subgroup when this kernel is being executed on a device.

.Built-in Work-Item Functions for Subgroups
[cols="a,",options="header",]
|====
| *Function*
| *Description*

| uint *get_sub_group_size*()
| Returns the number of work-items in the subgroup.
  This value is no more than the maximum subgroup size and is
  implementation-defined based on a combination of the compiled kernel and
  the dispatch dimensions.
  This will be a constant value for the lifetime of the subgroup.

| uint *get_max_sub_group_size*()
| Returns the maximum size of a subgroup within the dispatch.
  This value will be invariant for a given set of dispatch dimensions and a
  kernel object compiled for a given device.

| uint *get_num_sub_groups*()
| Returns the number of subgroups that the current work-group is divided
  into.

  This number will be constant for the duration of a work-group's execution.
  If the kernel is executed with a non-uniform work-group size
  (i.e. the global_work_size values specified to *clEnqueueNDRangeKernel*
  are not evenly divisible by the local_work_size values for any dimension,
  calls to this built-in from some work-groups may return different values
  than calls to this built-in from other work-groups.

| uint *get_enqueued_num_sub_groups*()
| Returns the same value as that returned by *get_num_sub_groups* if the
  kernel is executed with a uniform work-group size.

  If the kernel is executed with a non-uniform work-group size, returns the
  number of subgroups in each of the work-groups that make up the uniform
  region of the global range.

| uint *get_sub_group_id*()
| *get_sub_group_id* returns the subgroup ID which is a number from 0 ..
  *get_num_sub_groups*() - 1.

  For *clEnqueueTask*, this returns 0.

| uint *get_sub_group_local_id*()
| Returns the unique work-item ID within the current subgroup.
  The mapping from *get_local_id*(__dimindx__) to *get_sub_group_local_id*
  will be invariant for the lifetime of the work-group.

|====
--


[[math-functions]]
=== Math Functions

[open,refpage='mathFunctions',desc='Math Functions',type='freeform',spec='clang',anchor='math-functions',xrefs='commonFunctions integerFunctions',alias='acos acosh acospi asin asinh asinpi atan atan2 atan2pi atanh atanpi cbrt ceil copysign cos cosh cospi divide erf erfc exp exp10 exp2 expm1 fabs fdim floor fma fmax fmin fmod fract frexp half_cos half_divide half_exp half_exp10 half_exp2 half_log half_log10 half_log2 half_powr half_recip half_rsqrt half_sin half_sqrt half_tan hypot ilogb ldexp lgamma lgamma_r log log10 log1p log2 logb mad maxmag minmag modf nan native_cos native_divide native_exp native_exp10 native_exp2 native_log native_log10 native_log2 native_powr native_recip native_rsqrt native_sin native_sqrt native_tan nextafter pow pown powr recip remainder remquo rint rootn round rsqrt sin sincos sinh sinpi sqrt tan tanh tanpi tgamma trunc']
--

The built-in math functions are categorized into the following:

  * A list of built-in functions that have scalar or vector argument
    versions, and,
  * A list of built-in functions that only take scalar `float` arguments.

The vector versions of the math functions operate component-wise.
The description is per-component.

The built-in math functions are not affected by the prevailing rounding mode
in the calling environment, and always return the same value as they would
if called with the round to nearest even rounding mode.

The <<table-builtin-math, following table>> describes the list of built-in
math functions that can take scalar or vector arguments.
We use the generic type name `gentype` to indicate that the function can take
`float`, `float2`, `float3`, `float4`, `float8`, `float16`, `double`
footnote:double-supported[{fn-double-supported}], `double2`,
`double3`, `double4`, `double8` or `double16` as the type for the arguments.
We use the generic type name `gentypef` to indicate that the function can
take `float`, `float2`, `float3`, `float4`, `float8`, or `float16` as the
type for the arguments.
We use the generic type name `gentyped` footnote:double-supported[] to
indicate that the function can take `double`, `double2`, `double3`, `double4`,
`double8` or `double16` as the type for the arguments.
For any specific use of a function, the actual type has to be the same for
all arguments and the return type, unless otherwise specified.

[[table-builtin-math]]
.Built-in Scalar and Vector Argument Math Functions
[cols=",",]
|====
| *Function* |*Description*
| gentype *acos*(gentype)
    | Arc cosine function. Returns an angle in radians.
| gentype *acosh*(gentype)
    | Inverse hyperbolic cosine. Returns an angle in radians.
| gentype *acospi*(gentype _x_)
    | Compute *acos*(_x_) / {pi}.
| gentype *asin*(gentype)
    | Arc sine function. Returns an angle in radians.
| gentype *asinh*(gentype)
    | Inverse hyperbolic sine. Returns an angle in radians.
| gentype *asinpi*(gentype _x_)
    | Compute *asin*(_x_) / {pi}.
| gentype *atan*(gentype _y_over_x_)
    | Arc tangent function. Returns an angle in radians.
| gentype *atan2*(gentype _y_, gentype _x_)
    | Arc tangent of _y_ / _x_. Returns an angle in radians.
| gentype *atanh*(gentype)
    | Hyperbolic arc tangent. Returns an angle in radians.
| gentype *atanpi*(gentype _x_)
    | Compute *atan*(_x_) / {pi}.
| gentype *atan2pi*(gentype _y_, gentype _x_)
    | Compute *atan2*(_y_, _x_) / {pi}.
| gentype *cbrt*(gentype)
    | Compute cube-root.
| gentype *ceil*(gentype)
    | Round to integral value using the round to positive infinity rounding
      mode.
| gentype *copysign*(gentype _x_, gentype _y_)
    | Returns _x_ with its sign changed to match the sign of _y_.
| gentype *cos*(gentype _x_)
    | Compute cosine, where _x_ is an angle in radians.
| gentype *cosh*(gentype _x_)
    | Compute hyperbolic cosine, where _x_ is an angle in radians.
| gentype *cospi*(gentype _x_)
    | Compute *cos*({pi} _x_).
| gentype *erfc*(gentype)
    | Complementary error function.
| gentype *erf*(gentype)
    | Error function encountered in integrating the
      http://mathworld.wolfram.com/NormalDistribution.html[_normal
      distribution_].
| gentype *exp*(gentype _x_)
    | Compute the base-_e_ exponential of _x_.
| gentype *exp2*(gentype)
    | Exponential base 2 function.
| gentype *exp10*(gentype)
    | Exponential base 10 function.
| gentype *expm1*(gentype _x_)
    | Compute _e^x^_ - 1.0.
| gentype *fabs*(gentype)
    | Compute absolute value of a floating-point number.
| gentype *fdim*(gentype _x_, gentype _y_)
    | _x_ - _y_ if _x_ > _y_, +0 if _x_ is less than or equal to y.
| gentype *floor*(gentype)
    | Round to integral value using the round to negative infinity rounding
      mode.
| gentype *fma*(gentype _a_, gentype _b_, gentype _c_)
    | Returns the correctly rounded floating-point representation of the sum
      of _c_ with the infinitely precise product of _a_ and _b_.
      Rounding of intermediate products shall not occur.
      Edge case behavior is per the IEEE 754-2008 standard.
| gentype *fmax*(gentype _x_, gentype _y_) +
  gentypef *fmax*(gentypef _x_, float _y_) +
  gentyped *fmax*(gentyped _x_, double _y_)
    | Returns _y_ if _x_ < _y_, otherwise it returns _x_.
      If one argument is a NaN, *fmax*() returns the other argument.
      If both arguments are NaNs, *fmax*() returns a NaN.
| gentype *fmin*(gentype _x_, gentype _y_) +
  gentypef *fmin*(gentypef _x_, float _y_) +
  gentyped *fmin*(gentyped _x_, double _y_)
    | Returns _y_ if _y_ < _x_, otherwise it returns _x_.
      If one argument is a NaN, *fmin*() returns the other argument.
      If both arguments are NaNs, *fmin*() returns a NaN.
      footnote:[{fn-fmin-fmax-nan}]
| gentype *fmod*(gentype _x_, gentype _y_)
    | Modulus.
      Returns _x_ - _y_ * *trunc*(_x_/_y_).
| gentype *fract*(gentype _x_, {global} gentype _*iptr_) +
  gentype *fract*(gentype _x_, {local} gentype _*iptr_) +
  gentype *fract*(gentype _x_, {private} gentype _*iptr_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  gentype *fract*(gentype _x_, gentype _*iptr_)
    | Returns *fmin*(_x_ - *floor*(_x_), `0x1.fffffep-1f`).
      *floor*(x) is returned in _iptr_.
      footnote:[{fn-fract-min}]
| float__n__ **frexp**(float__n__ _x_, {global} int__n__ *exp) +
  float **frexp**(float _x_, {global} int *exp) +

  float__n__ **frexp**(float__n__ _x_, {local} int__n__ *exp) +
  float **frexp**(float _x_, {local} int *exp) +

  float__n__ **frexp**(float__n__ _x_, {private} int__n__ *exp) +
  float **frexp**(float _x_, {private} int *exp) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  float__n__ **frexp**(float__n__ _x_, int__n__ *exp) +
  float **frexp**(float _x_, int *exp)
    | Extract mantissa and exponent from _x_.
      For each component the mantissa returned is a `float` with magnitude
      in the interval [1/2, 1) or 0.
      Each component of _x_ equals mantissa returned * 2__^exp^__.
| double__n__ **frexp**(double__n__ _x_, {global} int__n__ *exp) +
  double **frexp**(double _x_, {global} int *exp) +

  double__n__ **frexp**(double__n__ _x_, {local} int__n__ *exp) +
  double **frexp**(double _x_, {local} int *exp) +

  double__n__ **frexp**(double__n__ _x_, {private} int__n__ *exp) +
  double **frexp**(double _x_, {private} int *exp) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  double__n__ **frexp**(double__n__ _x_, int__n__ *exp) +
  double **frexp**(double _x_, int *exp)
    | Extract mantissa and exponent from _x_.
      For each component the mantissa returned is a `double` with magnitude
      in the interval [1/2, 1) or 0.
      Each component of _x_ equals mantissa returned * 2__^exp^__.
| gentype *hypot*(gentype _x_, gentype _y_)
    | Compute the value of the square root of __x__^2^+ __y__^2^ without
      undue overflow or underflow.
| int__n__ *ilogb*(float__n__ _x_) +
  int *ilogb*(float _x_) +
  int__n__ *ilogb*(double__n__ _x_) +
  int *ilogb*(double _x_)
    | Return the exponent as an integer value.
| float__n__ *ldexp*(float__n__ _x_, int__n__ _k_) +
  float__n__ *ldexp*(float__n__ _x_, int _k_) +
  float *ldexp*(float _x_, int _k_) +
  double__n__ *ldexp*(double__n__ _x_, int__n__ _k_) +
  double__n__ *ldexp*(double__n__ _x_, int _k_) +
  double *ldexp*(double _x_, int _k_)
    | Multiply _x_ by 2 to the power _k_.
| gentype *lgamma*(gentype _x_) +

  float__n__ **lgamma_r**(float__n__ _x_, {global} int__n__ *_signp_) +
  float **lgamma_r**(float _x_, {global} int *_signp_) +
  double__n__ **lgamma_r**(double__n__ _x_, {global} int__n__ *_signp_) +
  double **lgamma_r**(double _x_, {global} int *_signp_) +

  float__n__ **lgamma_r**(float__n__ _x_, {local} int__n__ *_signp_) +
  float **lgamma_r**(float _x_, {local} int *_signp_) +
  double__n__ **lgamma_r**(double__n__ _x_, {local} int__n__ *_signp_) +
  double **lgamma_r**(double _x_, {local} int *_signp_) +

  float__n__ **lgamma_r**(float__n__ _x_, {private} int__n__ *_signp_) +
  float **lgamma_r**(float _x_, {private} int *_signp_) +
  double__n__ **lgamma_r**(double__n__ _x_, {private} int__n__ *_signp_) +
  double **lgamma_r**(double _x_, {private} int *_signp_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  float__n__ **lgamma_r**(float__n__ _x_, int__n__ *_signp_) +
  float **lgamma_r**(float _x_, int *_signp_) +
  double__n__ **lgamma_r**(double__n__ _x_, int__n__ *_signp_) +
  double **lgamma_r**(double _x_, int *_signp_)
    | Log gamma function.
      Returns the natural logarithm of the absolute value of the gamma
      function.
      The sign of the gamma function is returned in the _signp_ argument of
      *lgamma_r*.
| gentype *log*(gentype)
    | Compute natural logarithm.
| gentype *log2*(gentype)
    | Compute a base 2 logarithm.
| gentype *log10*(gentype)
    | Compute a base 10 logarithm.
| gentype *log1p*(gentype _x_)
    | Compute log~e~(1.0 + _x_).
| gentype *logb*(gentype _x_)
    | Compute the exponent of _x_, which is the integral part of
      log__~r~__(\|_x_\|).
| gentype *mad*(gentype _a_, gentype _b_, gentype _c_)
    | *mad* computes _a_ * _b_ + _c_.
    The function may compute _a_ * _b_ + _c_ with reduced accuracy
    in the embedded profile.  See the OpenCL SPIR-V Environment Specification
    for details. On some hardware the mad instruction may provide better
    performance than expanded computation of _a_ * _b_ + _c_.
    footnote:[{fn-mad-caution}]
| gentype *maxmag*(gentype _x_, gentype _y_)
    | Returns _x_ if \|_x_\| > \|_y_\|, _y_ if \|_y_\| > \|_x_\|, otherwise
      *fmax*(_x_, _y_).

      <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.
| gentype *minmag*(gentype _x_, gentype _y_)
    | Returns _x_ if \|_x_\| < \|_y_\|, _y_ if \|_y_\| < \|_x_\|, otherwise
      *fmin*(_x_, _y_).

      <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.
| gentype *modf*(gentype _x_, {global} gentype _*iptr_) +
  gentype *modf*(gentype _x_, {local} gentype _*iptr_) +
  gentype *modf*(gentype _x_, {private} gentype _*iptr_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  gentype *modf*(gentype _x_, gentype _*iptr_)
    | Decompose a floating-point number.
      The *modf* function breaks the argument _x_ into integral and
      fractional parts, each of which has the same sign as the argument.
      It stores the integral part in the object pointed to by _iptr_.
| float__n__ *nan*(uint__n__ _nancode_) +
  float *nan*(uint _nancode_) +
  double__n__ *nan*(ulong__n__ _nancode_) +
  double *nan*(ulong _nancode_)
    | Returns a quiet NaN.
      The _nancode_ may be placed in the significand of the resulting NaN.
| gentype *nextafter*(gentype _x_, gentype _y_)
    | Computes the next representable single-precision floating-point value
      following _x_ in the direction of _y_.
      Thus, if _y_ is less than _x_, *nextafter*() returns the largest
      representable floating-point number less than _x_.
| gentype *pow*(gentype _x_, gentype _y_)
    | Compute _x_ to the power _y_.
| float__n__ *pown*(float__n__ _x_, int__n__ _y_) +
  float *pown*(float _x_, int _y_) +
  double__n__ *pown*(double__n__ _x_, int__n__ _y_) +
  double *pown*(double _x_, int _y_)
    | Compute _x_ to the power _y_, where _y_ is an integer.
| gentype *powr*(gentype _x_, gentype _y_)
    | Compute _x_ to the power _y_, where _x_ is >= 0.
| gentype *remainder*(gentype _x_, gentype _y_)
    | Compute the value _r_ such that _r_ = _x_ - _n_*_y_, where _n_ is the
      integer nearest the exact value of _x_/_y_.
      If there are two integers closest to _x_/_y_, _n_ shall be the even
      one.
      If _r_ is zero, it is given the same sign as _x_.
| float__n__ **remquo**(float__n__ _x_, float__n__ _y_, {global} int__n__ _*quo_) +
  float **remquo**(float _x_, float _y_, {global} int _*quo_) +

  float__n__ **remquo**(float__n__ _x_, float__n__ _y_, {local} int__n__ _*quo_) +
  float **remquo**(float _x_, float _y_, {local} int _*quo_) +

  float__n__ **remquo**(float__n__ _x_, float__n__ _y_, {private} int__n__ _*quo_) +
  float **remquo**(float _x_, float _y_, {private} int _*quo_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  float__n__ **remquo**(float__n__ _x_, float__n__ _y_, int__n__ _*quo_) +
  float **remquo**(float _x_, float _y_, int _*quo_)
    | The *remquo* function computes the value r such that _r_ = _x_ -
      _k_*_y_, where _k_ is the integer nearest the exact value of _x_/_y_.
      If there are two integers closest to _x_/_y_, _k_ shall be the even
      one.
      If _r_ is zero, it is given the same sign as _x_.
      This is the same value that is returned by the *remainder* function.
      *remquo* also calculates the lower seven bits of the integral quotient
      _x_/_y_, and gives that value the same sign as _x_/_y_.
      It stores this signed value in the object pointed to by _quo_.
| double__n__ **remquo**(double__n__ _x_, double__n__ _y_, {global} int__n__ _*quo_) +
  double **remquo**(double _x_, double _y_, {global} int _*quo_) +

  double__n__ **remquo**(double__n__ _x_, double__n__ _y_, {local} int__n__ _*quo_) +
  double **remquo**(double _x_, double _y_, {local} int _*quo_) +

  double__n__ **remquo**(double__n__ _x_, double__n__ _y_, {private} int__n__ _*quo_) +
  double **remquo**(double _x_, double _y_, {private} int _*quo_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  double__n__ **remquo**(double__n__ _x_, double__n__ _y_, int__n__ _*quo_) +
  double **remquo**(double _x_, double _y_, int _*quo_)
    | The *remquo* function computes the value r such that _r_ = _x_ -
      _k_*_y_, where _k_ is the integer nearest the exact value of _x_/_y_.
      If there are two integers closest to _x_/_y_, _k_ shall be the even
      one.
      If _r_ is zero, it is given the same sign as _x_.
      This is the same value that is returned by the *remainder* function.
      *remquo* also calculates the lower seven bits of the integral quotient
      _x_/_y_, and gives that value the same sign as _x_/_y_.
      It stores this signed value in the object pointed to by _quo_.
| gentype *rint*(gentype)
    | Round to integral value (using round to nearest even rounding mode) in
      floating-point format.
      Refer to section 7.1 for description of rounding modes.
| float__n__ *rootn*(float__n__ _x_, int__n__ _y_) +
  float *rootn*(float _x_, int _y_) +
  double__n__ *rootn*(double__n__ _x_, int__n__ _y_) +
  double *rootn*(double _x_, int _y_)
    | Compute _x_ to the power 1/_y_.
| gentype *round*(gentype _x_)
    | Return the integral value nearest to _x_ rounding halfway cases away
      from zero, regardless of the current rounding direction.
| gentype *rsqrt*(gentype)
    | Compute inverse square root.
| gentype *sin*(gentype _x_)
    | Compute sine, where _x_ is an angle in radians.
| gentype *sincos*(gentype _x_, {global} gentype _*cosval_) +
  gentype *sincos*(gentype _x_, {local} gentype _*cosval_) +
  gentype *sincos*(gentype _x_, {private} gentype _*cosval_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  gentype *sincos*(gentype _x_, gentype _*cosval_)
    | Compute sine and cosine of x.
      The computed sine is the return value and computed cosine is returned
      in _cosval_, where _x_ is an angle in radians.
| gentype *sinh*(gentype _x_)
    | Compute hyperbolic sine, where _x_ is an angle in radians
| gentype *sinpi*(gentype _x_)
    | Compute *sin*({pi} _x_).
| gentype *sqrt*(gentype)
    | Compute square root.
| gentype *tan*(gentype _x_)
    | Compute tangent, where _x_ is an angle in radians.
| gentype *tanh*(gentype _x_)
    | Compute hyperbolic tangent, where _x_ is an angle in radians.
| gentype *tanpi*(gentype _x_)
    | Compute *tan*({pi} _x_).
| gentype *tgamma*(gentype)
    | Compute the gamma function.
| gentype *trunc*(gentype)
    | Round to integral value using the round to zero rounding mode.
|====

The following table describes the following functions:

  * A subset of functions from <<table-builtin-math>> that are defined with
    the half_ prefix .
    These functions are implemented with a minimum of 10-bits of accuracy,
    i.e. an ULP value \<= 8192 ulp.
  * A subset of functions from <<table-builtin-math>> that are defined with
    the native_ prefix.
    These functions may map to one or more native device instructions and
    will typically have better performance compared to the corresponding
    functions (without the `+native_+` prefix) described in
    <<table-builtin-math>>.
    The accuracy (and in some cases the input range(s)) of these functions
    is implementation-defined.
  * `+half_+` and `+native_+` functions for following basic operations:
    divide and reciprocal.

We use the generic type name `gentype` to indicate that the functions in the
following table can take `float`, `float2`, `float3`, `float4`, `float8` or
`float16` as the type for the arguments.

[[table-builtin-half-native-math]]
.Built-in Scalar and Vector _half_ and _native_ Math Functions
[cols=",",]
|====
| *Function* | *Description*
| gentype *half_cos*(gentype _x_)
    | Compute cosine.
      _x_ is an angle in radians, and must be in the range [-2^16^, +2^16^].
| gentype *half_divide*(gentype _x_, gentype _y_)
    | Compute _x_ / _y_.
| gentype *half_exp*(gentype _x_)
    | Compute the base-_e_ exponential of _x_.
| gentype *half_exp2*(gentype _x_)
    | Compute the base- 2 exponential of _x_.
| gentype *half_exp10*(gentype _x_)
    | Compute the base- 10 exponential of _x_.
| gentype *half_log*(gentype _x_)
    | Compute natural logarithm.
| gentype *half_log2*(gentype _x_)
    | Compute a base 2 logarithm.
| gentype *half_log10*(gentype _x_)
    | Compute a base 10 logarithm.
| gentype *half_powr*(gentype _x_, gentype _y_)
    | Compute _x_ to the power _y_, where _x_ is >= 0.
| gentype *half_recip*(gentype _x_)
    | Compute reciprocal.
| gentype *half_rsqrt*(gentype _x_)
    | Compute inverse square root.
| gentype *half_sin*(gentype _x_)
    | Compute sine.
      _x_ is an angle in radians, and must be in the range [-2^16^, +2^16^].
| gentype *half_sqrt*(gentype _x_)
    | Compute square root.
| gentype *half_tan*(gentype _x_)
    | Compute tangent.
      _x_ is an angle in radians, and must be in the range [-2^16^, +2^16^].
| |
| gentype *native_cos*(gentype _x_)
    | Compute cosine over an implementation-defined range, where _x_ is an
      angle in radians.
      The maximum error is implementation-defined.
| gentype *native_divide*(gentype _x_, gentype _y_)
    | Compute _x_ / _y_ over an implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_exp*(gentype _x_)
    | Compute the base-__e__ exponential of _x_ over an
      implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_exp2*(gentype _x_)
    | Compute the base-2 exponential of _x_ over an implementation-defined
      range.
      The maximum error is implementation-defined.
| gentype *native_exp10*(gentype _x_)
    | Compute the base-10 exponential of _x_ over an implementation-defined
      range.
      The maximum error is implementation-defined.
| gentype *native_log*(gentype _x_)
    | Compute natural logarithm over an implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_log2*(gentype _x_)
    | Compute a base 2 logarithm over an
      implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_log10*(gentype _x_)
    | Compute a base 10 logarithm over
      an implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_powr*(gentype _x_, gentype _y_)
    | Compute _x_ to the power _y_, where _x_ is >= 0.
      The range of _x_ and _y_ are implementation-defined.
      The maximum error is implementation-defined.
| gentype *native_recip*(gentype _x_)
    | Compute reciprocal over an implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_rsqrt*(gentype _x_)
    | Compute inverse square root over an implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_sin*(gentype _x_)
    | Compute sine over an implementation-defined range, where _x_ is an
      angle in radians.
      The maximum error is implementation-defined.
| gentype *native_sqrt*(gentype _x_)
    | Compute square root over an implementation-defined range.
      The maximum error is implementation-defined.
| gentype *native_tan*(gentype _x_)
    | Compute tangent over an implementation-defined range, where _x_ is an
      angle in radians.
      The maximum error is implementation-defined.
|====


Support for denormal values is optional for *half_* functions.
The *half_* functions may return any result allowed by
<<edge-case-behavior-in-flush-to-zero-mode,Edge Case Behavior>>, even when
`-cl-denorms-are-zero` (see <<opencl-spec,section 5.8.4.2 of the OpenCL
Specification>>) is not in force.
Support for denormal values is implementation-defined for *native_*
functions.
--


[open,refpage='mathConstants',desc='Math Constants',type='freeform',spec='clang',anchor='table-builtin-half-native-math',xrefs='mathFunctions',alias='MAXFLOAT HUGE_VALF INFINITY NAN HUGE_VAL']
--
The following symbolic constants are available.
Their values are of type `float` and are accurate within the precision of a
single precision floating-point number.

[cols=",",]
|====
| *Constant Name* | *Description*
| `MAXFLOAT`
    | Value of maximum non-infinite single-precision floating-point number.
| `HUGE_VALF`
    | A positive `float` constant expression.
      `HUGE_VALF` evaluates to +infinity.
      Used as an error value returned by the built-in math functions.
| `INFINITY`
    | A constant expression of type `float` representing positive or
      unsigned infinity.
| `NAN`
    | A constant expression of type `float` representing a quiet NaN.
|====

If double precision is supported by the device, e.g. for OpenCL C 3.0 or newer
the `+__opencl_c_fp64+` feature macro is present, the following symbolic
constants will also be available:

[cols=",",]
|====
| *Constant Name* | *Description*
| `HUGE_VAL`
    | A positive double constant expression.
      `HUGE_VAL` evaluates to +infinity.
      Used as an error value returned by the built-in math functions.
|====
--


[[floating-point-macros-and-pragmas]]
==== Floating-point macros and pragmas

[open,refpage='fpMacros',desc='Floating-Point Macros And Pragmas',type='freeform',spec='clang',anchor='floating-point-macros-and-pragmas',xrefs='integerMacros',alias='FP_CONTRACT FP_FAST_FMAF FP_FAST_FMA macroLimits']
--

The `FP_CONTRACT` pragma can be used to allow (if the state is on) or
disallow (if the state is off) the implementation to contract expressions.
Each pragma can occur either outside external declarations or preceding all
explicit declarations and statements inside a compound statement.
When outside external declarations, the pragma takes effect from its
occurrence until another `FP_CONTRACT` pragma is encountered, or until the
end of the translation unit.
When inside a compound statement, the pragma takes effect from its
occurrence until another `FP_CONTRACT` pragma is encountered (including
within a nested compound statement), or until the end of the compound
statement; at the end of a compound statement the state for the pragma is
restored to its condition just before the compound statement.
If this pragma is used in any other context, the behavior is undefined.

The pragma definition to set `FP_CONTRACT` is:

[source,c]
----------
// on-off-switch is one of ON, OFF, or DEFAULT.
// The DEFAULT value is ON.
#pragma OPENCL FP_CONTRACT on-off-switch
----------

The `FP_FAST_FMAF` macro indicates whether the *fma* function is fast
compared with direct code for single precision floating-point.
If defined, the `FP_FAST_FMAF` macro shall indicate that the *fma* function
generally executes about as fast as, or faster than, a multiply and an add
of `float` operands.

The macro names given in the following list must use the values specified.
These constant expressions are suitable for use in `#if` preprocessing
directives.

[source,c]
----------
#define FLT_DIG         6
#define FLT_MANT_DIG    24
#define FLT_MAX_10_EXP  +38
#define FLT_MAX_EXP     +128
#define FLT_MIN_10_EXP  -37
#define FLT_MIN_EXP     -125
#define FLT_RADIX       2
#define FLT_MAX         0x1.fffffep127f
#define FLT_MIN         0x1.0p-126f
#define FLT_EPSILON     0x1.0p-23f
----------

The following table describes the built-in macro names given above in the
OpenCL C programming language and the corresponding macro names available to
the application.

[cols=",",]
|====
| *Macro in OpenCL Language*  | *Macro for application*
| `FLT_DIG`                   | `CL_FLT_DIG`
| `FLT_MANT_DIG`              | `CL_FLT_MANT_DIG`
| `FLT_MAX_10_EXP`            | `CL_FLT_MAX_10_EXP`
| `FLT_MAX_EXP`               | `CL_FLT_MAX_EXP`
| `FLT_MIN_10_EXP`            | `CL_FLT_MIN_10_EXP`
| `FLT_MIN_EXP`               | `CL_FLT_MIN_EXP`
| `FLT_RADIX`                 | `CL_FLT_RADIX`
| `FLT_MAX`                   | `CL_FLT_MAX`
| `FLT_MIN`                   | `CL_FLT_MIN`
| `FLT_EPSILSON`              | `CL_FLT_EPSILON`
|====

The following macros shall expand to integer constant expressions whose
values are returned by *ilogb*(_x_) if _x_ is zero or NaN, respectively.
The value of `FP_ILOGB0` shall be either `INT_MIN` or `-INT_MAX`.
The value of `FP_ILOGBNAN` shall be either `INT_MAX` or `INT_MIN`.

The following constants are also available.
They are of type `float` and are accurate within the precision of the
`float` type.

[cols=",",]
|====
| *Constant*      | *Description*
| `M_E_F`         | Value of _e_
| `M_LOG2E_F`     | Value of log~2~e
| `M_LOG10E_F`    | Value of log~10~e
| `M_LN2_F`       | Value of log~e~2
| `M_LN10_F`      | Value of log~e~10
| `M_PI_F`        | Value of {pi}
| `M_PI_2_F`      | Value of {pi} / 2
| `M_PI_4_F`      | Value of {pi} / 4
| `M_1_PI_F`      | Value of 1 / {pi}
| `M_2_PI_F`      | Value of 2 / {pi}
| `M_2_SQRTPI_F`  | Value of 2 / {sqrt}{pi}
| `M_SQRT2_F`     | Value of {sqrt}2
| `M_SQRT1_2_F`   | Value of 1 / {sqrt}2
|====

If double precision is supported by the device, e.g. for OpenCL C 3.0 or newer
the `+__opencl_c_fp64+` feature macro is present, then the following macros
and constants are also available:

The `FP_FAST_FMA` macro indicates whether the *fma*() family of functions
are fast compared with direct code for double precision floating-point.
If defined, the `FP_FAST_FMA` macro shall indicate that the *fma*() function
generally executes about as fast as, or faster than, a multiply and an add
of `double` operands

The macro names given in the following list must use the values specified.
These constant expressions are suitable for use in `#if` preprocessing
directives.

[source,c]
----------
#define DBL_DIG         15
#define DBL_MANT_DIG    53
#define DBL_MAX_10_EXP  +308
#define DBL_MAX_EXP     +1024
#define DBL_MIN_10_EXP  -307
#define DBL_MIN_EXP     -1021
#define DBL_MAX         0x1.fffffffffffffp1023
#define DBL_MIN         0x1.0p-1022
#define DBL_EPSILON     0x1.0p-52
----------

The following table describes the built-in macro names given above in the
OpenCL C programming language and the corresponding macro names available to
the application.

[cols=",",]
|====
| *Macro in OpenCL Language* | *Macro for application*
| `DBL_DIG`                  | `CL_DBL_DIG`
| `DBL_MANT_DIG`             | `CL_DBL_MANT_DIG`
| `DBL_MAX_10_EXP`           | `CL_DBL_MAX_10_EXP`
| `DBL_MAX_EXP`              | `CL_DBL_MAX_EXP`
| `DBL_MIN_10_EXP`           | `CL_DBL_MIN_10_EXP`
| `DBL_MIN_EXP`              | `CL_DBL_MIN_EXP`
| `DBL_MAX`                  | `CL_DBL_MAX`
| `DBL_MIN`                  | `CL_DBL_MIN`
| `DBL_EPSILSON`             | `CL_DBL_EPSILON`
|====

The following constants are also available.
They are of type ``double`` and are accurate within the precision of the
double type.

[cols=",",]
|====
| *Constant*   | *Description*
| `M_E`        | Value of _e_
| `M_LOG2E`    | Value of log~2~e
| `M_LOG10E`   | Value of log~10~e
| `M_LN2`      | Value of log~e~2
| `M_LN10`     | Value of log~e~10
| `M_PI`       | Value of {pi}
| `M_PI_2`     | Value of {pi} / 2
| `M_PI_4`     | Value of {pi} / 4
| `M_1_PI`     | Value of 1 / {pi}
| `M_2_PI`     | Value of 2 / {pi}
| `M_2_SQRTPI` | Value of 2 / {sqrt}{pi}
| `M_SQRT2`    | Value of {sqrt}2
| `M_SQRT1_2`  | Value of 1 / {sqrt}2
|====
--


[[integer-functions]]
=== Integer Functions

[open,refpage='integerFunctions',desc='Integer Functions',type='freeform',spec='clang',anchor='integer-functions',xrefs='commonFunctions',alias='abs add_sat clamp_integer clz ctz hadd mad24 mad_hi mad_sat integerMax integerMin mul24 mul_hi popcount rotate sub_sat upsample']
--
The <<table-builtin-functions, following table>> describes the built-in integer
functions that take scalar or vector arguments.
The vector versions of the integer functions operate component-wise.
The description is per-component.

We use the generic type name `gentype` to indicate that the function can take
`char`, `char{2|3|4|8|16}`, `uchar`, `uchar{2|3|4|8|16}`, `short`,
`short{2|3|4|8|16}`, `ushort`, `ushort{2|3|4|8|16}`, `int`, `int{2|3|4|8|16}`,
`uint`, `uint{2|3|4|8|16}`, `long` footnote:[{fn-int64-supported}],
`long{2|3|4|8|16}`, `ulong`, or `ulong{2|3|4|8|16}` as the type for the
arguments.
We use the generic type name `ugentype` to refer to unsigned versions of
`gentype`.
For example, if `gentype` is `char4`, `ugentype` is `uchar4`.
We also use the generic type name `sgentype` to indicate that the function
can take a scalar data type, i.e. `char`, `uchar`, `short`, `ushort`, `int`,
`uint`, `long`, or `ulong`, as the type for the arguments.
For built-in integer functions that take `gentype` and `sgentype` arguments,
the `gentype` argument must be a vector or scalar version of the `sgentype`
argument.
For example, if `sgentype` is `uchar`, `gentype` must be `uchar` or
`uchar{2|3|4|8|16}`.
For vector versions, `sgentype` is implicitly widened to `gentype` as
described for <<operators-arithmetic,arithmetic operators>>.

For any specific use of a function, the actual type has to be the same for
all arguments and the return type unless otherwise specified.

[[table-builtin-functions]]
.Built-in Scalar and Vector Integer Argument Functions
[cols=",",]
|====
| *Function* | *Description*
| ugentype *abs*(gentype _x_)
    | Returns \|x\|.
| ugentype *abs_diff*(gentype _x_, gentype _y_)
    | Returns \|x - y\| without modulo overflow.
| gentype *add_sat*(gentype _x_, gentype _y_)
    | Returns _x_ + _y_ and saturates the result.
| gentype *hadd*(gentype _x_, gentype _y_)
    | Returns (_x_ + _y_) >> 1.
      The intermediate sum does not modulo overflow.
| gentype *rhadd*(gentype _x_, gentype _y_)
    | Returns (_x_ + _y_ + 1) >> 1.
      The intermediate sum does not modulo overflow.
      footnote:[{fn-rhadd-benefit}]
| gentype *clamp*(gentype _x_, gentype _minval_, gentype _maxval_) +
  gentype *clamp*(gentype _x_, sgentype _minval_, sgentype _maxval_)
    | Returns *min*(*max*(_x_, _minval_), _maxval_).
      Results are undefined if _minval_ > _maxval_.

      <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.
| gentype *clz*(gentype _x_)
    | Returns the number of leading 0-bits in _x_, starting at the most
      significant bit position.
      If _x_ is 0, returns the size in bits of the type of _x_ or component
      type of _x_, if _x_ is a vector.
| gentype *ctz*(gentype _x_)
    | Returns the count of trailing 0-bits in _x_.
      If _x_ is 0, returns the size in bits of the type of _x_ or component
      type of _x_, if _x_ is a vector.

      <<unified-spec, Requires>> support for OpenCL 2.0 or newer.
| gentype *mad_hi*(gentype _a_, gentype _b_, gentype _c_)
    | Returns *mul_hi*(_a_, _b_) + _c_.
| gentype *mad_sat*(gentype _a_, gentype _b_, gentype _c_)
    | Returns _a_ * _b_ + _c_ and saturates the result.
| gentype *max*(gentype _x_, gentype _y_) +

  For OpenCL C 1.1 or newer: +

  gentype *max*(gentype _x_, sgentype _y_)
    | Returns _y_ if _x_ < _y_, otherwise it returns _x_.
| gentype *min*(gentype _x_, gentype _y_) +

  For OpenCL C 1.1 or newer: +

  gentype *min*(gentype _x_, sgentype _y_)
    | Returns _y_ if _y_ < _x_, otherwise it returns _x_.
| gentype *mul_hi*(gentype _x_, gentype _y_)
    | Computes _x_ * _y_ and returns the high half of the product of _x_ and
      _y_.
| gentype *rotate*(gentype _v_, gentype _i_)
    | For each element in _v_, the bits are shifted left by the number of
      bits given by the corresponding element in _i_ (subject to the usual
      <<operators-shift,shift modulo rules>>).
      Bits shifted off the left side of the element are shifted back in from
      the right.
| gentype *sub_sat*(gentype _x_, gentype _y_)
    | Returns _x_ - _y_ and saturates the result.
| short *upsample*(char _hi_, uchar _lo_) +
  ushort *upsample*(uchar _hi_, uchar _lo_) +
  short__n__ *upsample*(char__n__ _hi_, uchar__n__ _lo_) +
  ushort__n__ *upsample*(uchar__n__ _hi_, uchar__n__ _lo_)
    | _result_[i] = ((short)_hi_[i] << 8) \| _lo_[i] +
      _result_[i] = ((ushort)_hi_[i] << 8) \| _lo_[i] +
| int *upsample*(short _hi_, ushort _lo_) +
  uint *upsample*(ushort _hi_, ushort _lo_) +
  int__n__ *upsample*(short__n__ _hi_, ushort__n__ _lo_) +
  uint__n__ *upsample*(ushort__n__ _hi_, ushort__n__ _lo_)
    | _result_[i] = ((int)_hi_[i] << 16) \| _lo_[i] +
      _result_[i] = ((uint)_hi_[i] << 16) \| _lo_[i] +
| long *upsample*(int _hi_, uint _lo_) +
  ulong *upsample*(uint _hi_, uint _lo_) +
  long__n__ *upsample*(int__n__ _hi_, uint__n__ _lo_) +
  ulong__n__ *upsample*(uint__n__ _hi_, uint__n__ _lo_)
    | _result_[i] = ((long)_hi_[i] << 32) \| _lo_[i] +
      _result_[i] = ((ulong)_hi_[i] << 32) \| _lo_[i]
| gentype *popcount*(gentype _x_)
    | Returns the number of non-zero bits in _x_. +

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
|====

The following table describes fast integer functions that can be used for
optimizing performance of kernels.
We use the generic type name `gentype` to indicate that the function can
take `int`, `int2`, `int3`, `int4`, `int8`, `int16`, `uint`, `uint2`,
`uint3`, `uint4`, `uint8` or `uint16` as the type for the arguments.

[[table-builtin-fast-integer]]
.Built-in 24-bit Integer Functions
[cols=",",]
|====
| *Function* | *Description*
| gentype *mad24*(gentype _x_, gentype _y_, gentype z)
    | Multipy two 24-bit integer values _x_ and _y_ and add the 32-bit
      integer result to the 32-bit integer _z_.
      Refer to definition of *mul24* to see how the 24-bit integer
      multiplication is performed.
| gentype *mul24*(gentype _x_, gentype _y_)
    | Multiply two 24-bit integer values _x_ and _y_.
      _x_ and _y_ are 32-bit integers but only the low 24-bits are used to
      perform the multiplication.
      *mul24* should only be used when values in _x_ and _y_ are in the
      range [-2^23^, 2^23^-1] if _x_ and _y_ are signed integers and in the
      range [0, 2^24^-1] if _x_ and _y_ are unsigned integers.
      If _x_ and _y_ are not in this range, the multiplication result is
      implementation-defined.
|====
--


[[integer-macros]]
==== Integer Macros

[open,refpage='integerMacros',desc='Integer Macros',type='freeform',spec='clang',anchor='integer-macros',xrefs='fpMacros']
--
The macro names given in the following list must use the values specified.
The values shall all be constant expressions suitable for use in `#if`
preprocessing directives.

[source,c]
----------
#define CHAR_BIT        8
#define CHAR_MAX        SCHAR_MAX
#define CHAR_MIN        SCHAR_MIN
#define INT_MAX         2147483647
#define INT_MIN         (-2147483647 - 1)
#define LONG_MAX        0x7fffffffffffffffL
#define LONG_MIN        (-0x7fffffffffffffffL - 1)
#define SCHAR_MAX       127
#define SCHAR_MIN       (-127 - 1)
#define SHRT_MAX        32767
#define SHRT_MIN        (-32767 - 1)
#define UCHAR_MAX       255
#define USHRT_MAX       65535
#define UINT_MAX        0xffffffff
#define ULONG_MAX       0xffffffffffffffffUL
----------

The following table describes the built-in macro names given above in the
OpenCL C programming language and the corresponding macro names available to
the application.

[cols=",",]
|====
| *Macro in OpenCL Language* | *Macro for application*
| `CHAR_BIT`                 | `CL_CHAR_BIT`
| `CHAR_MAX`                 | `CL_CHAR_MAX`
| `CHAR_MIN`                 | `CL_CHAR_MIN`
| `INT_MAX`                  | `CL_INT_MAX`
| `INT_MIN`                  | `CL_INT_MIN`
| `LONG_MAX`                 | `CL_LONG_MAX`
| `LONG_MIN`                 | `CL_LONG_MIN`
| `SCHAR_MAX`                | `CL_SCHAR_MAX`
| `SCHAR_MIN`                | `CL_SCHAR_MIN`
| `SHRT_MAX`                 | `CL_SHRT_MAX`
| `SHRT_MIN`                 | `CL_SHRT_MIN`
| `UCHAR_MAX`                | `CL_UCHAR_MAX`
| `USHRT_MAX`                | `CL_USHRT_MAX`
| `UINT_MAX`                 | `CL_UINT_MAX`
| `ULONG_MAX`                | `CL_ULONG_MAX`
|====
--


[[common-functions]]
=== Common Functions

[open,refpage='commonFunctions',desc='Common Functions',type='freeform',spec='clang',anchor='common-functions',xrefs='integerFunctions',alias='commonClamp degrees commonMax commonMin mix radians sign smoothstep step']
--
The <<table-builtin-common, following table>> describes the list of built-in
common functions.
These all operate component-wise.
The description is per-component.
We use the generic type name `gentype` to indicate that the function can take
`float`, `float2`, `float3`, `float4`, `float8`, `float16`, `double`
footnote:[{fn-double-supported}], `double2`, `double3`, `double4`,
`double8` or `double16` as the type for the arguments.
We use the generic type name `gentypef` to indicate that the function can
take `float`, `float2`, `float3`, `float4`, `float8`, or `float16` as the
type for the arguments.
We use the generic type name `gentyped` to indicate that the function can
take `double`, `double2`, `double3`, `double4`, `double8` or `double16` as
the type for the arguments.

The built-in common functions are implemented using the round to nearest
even rounding mode.
The built-in common functions may be implemented using contractions such
as *mad* or *fma*.

[[table-builtin-common]]
.Built-in Scalar and Vector Argument Common Functions
[cols=",",]
|====
| *Function* | *Description*
| gentype *clamp*(gentype _x_, gentype _minval_, gentype _maxval_) +
  gentypef *clamp*(gentypef _x_, float _minval_, float _maxval_) +
  gentyped *clamp*(gentyped _x_, double _minval_, double _maxval_)
    | Returns *fmin*(*fmax*(_x_, _minval_), _maxval_).
      Results are undefined if _minval_ > _maxval_.
| gentype *degrees*(gentype _radians_)
    | Converts _radians_ to degrees, i.e. (180 / {pi}) * _radians_.
| gentype *max*(gentype _x_, gentype _y_) +
  gentypef *max*(gentypef _x_, float _y_) +
  gentyped *max*(gentyped _x_, double _y_)
    | Returns _y_ if _x_ < _y_, otherwise it returns _x_.
      If _x_ or _y_ are infinite or NaN, the return values are undefined.
| gentype *min*(gentype _x_, gentype _y_) +
  gentypef *min*(gentypef _x_, float _y_) +
  gentyped *min*(gentyped _x_, double _y_)
    | Returns _y_ if _y_ < _x_, otherwise it returns _x_.
      If _x_ or _y_ are infinite or NaN, the return values are undefined.
| gentype *mix*(gentype _x_, gentype _y_, gentype _a_) +
  gentypef *mix*(gentypef _x_, gentypef _y_, float _a_) +
  gentyped *mix*(gentyped _x_, gentyped _y_, double _a_)
    | Returns the linear blend of _x_ & _y_ implemented as:

      _x_ + (_y_ - _x_) * _a_

      _a_ must be a value in the range [0.0, 1.0].
      If _a_ is not in the range [0.0, 1.0], the return values are
      undefined.
| gentype *radians*(gentype _degrees_)
    | Converts _degrees_ to radians, i.e. ({pi} / 180) * _degrees_.
| gentype *step*(gentype _edge_, gentype _x_) +
  gentypef *step*(float _edge_, gentypef _x_) +
  gentyped *step*(double _edge_, gentyped _x_)
    | Returns 0.0 if _x_ < _edge_, otherwise it returns 1.0.
| gentype *smoothstep*(gentype _edge0_, gentype _edge1_, gentype _x_) +
  gentypef *smoothstep*(float _edge0_, float _edge1_, gentypef _x_) +
  gentyped *smoothstep*(double _edge0_, double _edge1_, gentyped _x_)
   a| Returns 0.0 if _x_ \<= _edge0_ and 1.0 if _x_ >= _edge1_ and performs
      smooth Hermite interpolation between 0 and 1 when _edge0_ < _x_ <
      _edge1_.
      This is useful in cases where you would want a threshold function with
      a smooth transition.

This is equivalent to:

[source,c]
----------
gentype t;
t = clamp ((x - edge0) / (edge1 - edge0), 0, 1);
return t * t * (3 - 2 * t);
----------

Results are undefined if _edge0_ >= _edge1_ or if _x_, _edge0_ or _edge1_ is
a NaN.

| gentype *sign*(gentype _x_)
    | Returns 1.0 if _x_ > 0, -0.0 if _x_ = -0.0, +0.0 if _x_ = +0.0, or
      -1.0 if _x_ < 0.
      Returns 0.0 if _x_ is a NaN.
|====

--


[[geometric-functions]]
=== Geometric Functions

[open,refpage='geometricFunctions',desc='Geometric Functions',type='freeform',spec='clang',anchor='geometric-functions',xrefs='integerFunctions',alias='cross dot distance length normalize fast_distance fast_length fast_normalize']
--

The <<table-builtin-geometric, following table>> describes the list of built-in
geometric functions.
These all operate component-wise.
The description is per-component.
`float__n__` is `float`, `float2`, `float3`, or `float4` and `double__n__` is
`double` footnote:[{fn-double-supported}], `double2`, `double3`, or
`double4`.

The built-in geometric functions are implemented using the round to nearest
even rounding mode.
The built-in geometric functions may be implemented using contractions such
as *mad* or *fma*.

[[table-builtin-geometric]]
.Built-in Scalar and Vector Argument Geometric Functions
[cols=",",]
|====
| *Function* | *Description*
| float4 *cross*(float4 _p0_, float4 _p1_) +
  float3 *cross*(float3 _p0_, float3 _p1_) +
  double4 *cross*(double4 _p0_, double4 _p1_) +
  double3 *cross*(double3 _p0_, double3 _p1_)
    | Returns the cross product of _p0.xyz_ and _p1.xyz_.
      The _w_ component of `float4` result returned will be 0.0.
| float *dot*(float__n__ _p0_, float__n__ _p1_) +
  double *dot*(double__n__ _p0_, double__n__ _p1_)
     | Compute dot product.
| float *distance*(float__n__ _p0_, float__n__ _p1_) +
  double *distance*(double__n__ _p0_, double__n__ _p1_)
    | Returns the distance between _p0_ and _p1_.
      This is calculated as *length*(_p0_ - _p1_).
| float *length*(float__n__ _p_) +
  double *length*(double__n__ _p_)
    | Return the length of vector _p_, i.e., {sqrt} __p.x__^2^ + _p.y_ ^2^
      {plus} ...
| float__n__ *normalize*(float__n__ _p_) +
  double__n__ *normalize*(double__n__ _p_)
    | Returns a vector in the same direction as _p_ but with a length of 1.
| |
| float *fast_distance*(float__n__ _p0_, float__n__ _p1_)
    | Returns *fast_length*(_p0_ - _p1_).
| float *fast_length*(float__n__ _p_)
    | Returns the length of vector _p_ computed as:

      *half_sqrt*(__p.x__^2^ + __p.y__^2^ + ...)
| float__n__ *fast_normalize*(float__n__ _p_)
   a| Returns a vector in the same direction as _p_ but with a length of 1.
      *fast_normalize* is computed as:

_p_ * *half_rsqrt*(__p.x__^2^ + __p.y__^2^ + ...)

The result shall be within 8192 ulps error from the infinitely precise
result of

[source,c]
----------
if (all(p == 0.0f))
  result = p;
else
  result = p /
    sqrt(p.x*p.x + p.y*p.y + ...);
----------

with the following exceptions:

. If the sum of squares is greater than `FLT_MAX` then the value of the
  floating-point values in the result vector are undefined.
. If the sum of squares is less than `FLT_MIN` then the implementation
  may return back _p_.
. If the device is in "`denorms are flushed to zero`" mode, individual
  operand elements with magnitude less than *sqrt*(`FLT_MIN`) may be flushed
  to zero before proceeding with the calculation.
|====
--


[[relational-functions]]
=== Relational Functions

[open,refpage='relationalFunctions',desc='Relational Functions',type='freeform',spec='clang',anchor='relational-functions',xrefs='integerFunctions',alias='all any bitselect isequal isfinite isgreater isgreaterequal isinf isless islessequal islessgreater isnan isnormal isnotequal isordered isunordered select signbit']
--

The <<operators-relational,relational>> and <<operators-equality,equality>>
operators (*<*, *\<=*, *>*, *>=*, *!=*, *==*) can be used with scalar and
vector built-in types and produce a scalar or vector signed integer result
respectively.

The functions described in the <<table-builtin-relational, following table>> can
be used with built-in scalar or vector types as arguments and return a scalar or
vector integer result footnote:[{fn-floating-point-exception-nans}].
The argument type `gentype` refers to the following built-in types: `char`,
`char__n__`, `uchar`, `uchar__n__`, `short`, `short__n__`, `ushort`,
`ushort__n__`, `int`, `int__n__`, `uint`, `uint__n__`, `long`
footnote:[{fn-int64-supported}], `long__n__`, `ulong`, `ulong__n__`, `float`,
`float__n__`, `double` footnote:[{fn-double-supported}], and
`double__n__`.
The argument type `igentype` refers to the built-in signed integer types
i.e. `char`, `char__n__`, `short`, `short__n__`, `int`, `int__n__`, `long`
and `long__n__`.
The argument type `ugentype` refers to the built-in unsigned integer types
i.e. `uchar`, `uchar__n__`, `ushort`, `ushort__n__`, `uint`, `uint__n__`,
`ulong` and `ulong__n__`.
_n_ is 2, 3, 4, 8, or 16.

The functions *isequal*, *isnotequal*, *isgreater*, *isgreaterequal*,
*isless*, *islessequal*, *islessgreater*, *isfinite*, *isinf*, *isnan*,
*isnormal*, *isordered*, *isunordered* and *signbit* described in the
following table shall return a 0 if the specified relation is _false_ and a
1 if the specified relation is _true_ for scalar argument types.
These functions shall return a 0 if the specified relation is _false_ and a
-1 (i.e. all bits set) if the specified relation is _true_ for vector
argument types.

The relational functions *isequal*, *isgreater*, *isgreaterequal*, *isless*,
*islessequal*, and *islessgreater* always return 0 if either argument is not
a number (NaN).
*isnotequal* returns 1 if one or both arguments are not a number (NaN) and
the argument type is a scalar and returns -1 if one or both arguments are
not a number (NaN) and the argument type is a vector.

[[table-builtin-relational]]
.Built-in Scalar and Vector Relational Functions
[cols=",",]
|====
| *Function* | *Description*
| int *isequal*(float _x_, float _y_) +
  int__n__ *isequal*(float__n__ _x_, float__n__ _y_) +
  int *isequal*(double _x_, double _y_) +
  long__n__ *isequal*(double__n__ _x_, double__n__ _y_)
    | Returns the component-wise compare of _x_ == _y_.
| int *isnotequal*(float _x_, float _y_) +
  int__n__ *isnotequal*(float__n__ _x_, float__n__ _y_) +
  int *isnotequal*(double _x_, double _y_) +
  long__n__ *isnotequal*(double__n__ _x_, double__n__ _y_)
    | Returns the component-wise compare of _x_ != _y_.
| int *isgreater*(float _x_, float _y_) +
  int__n__ *isgreater*(float__n__ _x_, float__n__ _y_) +
  int *isgreater*(double _x_, double _y_) +
  long__n__ *isgreater*(double__n__ _x_, double__n__ _y_)
    | Returns the component-wise compare of _x_ > _y_.
| int *isgreaterequal*(float _x_, float _y_) +
  int__n__ *isgreaterequal*(float__n__ _x_, float__n__ _y_) +
  int *isgreaterequal*(double _x_, double _y_) +
  long__n__ *isgreaterequal*(double__n__ _x_, double__n__ _y_)
    | Returns the component-wise compare of _x_ >= _y_.
| int *isless*(float _x_, float _y_) +
  int__n__ *isless*(float__n__ _x_, float__n__ _y_) +
  int *isless*(double _x_, double _y_) +
  long__n__ *isless*(double__n__ _x_, double__n__ _y_)
    | Returns the component-wise compare of _x_ < _y_.
| int *islessequal*(float _x_, float _y_) +
  int__n__ *islessequal*(float__n__ _x_, float__n__ _y_) +
  int *islessequal*(double _x_, double _y_) +
  long__n__ *islessequal*(double__n__ _x_, double__n__ _y_)
    | Returns the component-wise compare of _x_ \<= _y_.
| int *islessgreater*(float _x_, float _y_) +
  int__n__ *islessgreater*(float__n__ _x_, float__n__ _y_) +
  int *islessgreater*(double _x_, double _y_) +
  long__n__ *islessgreater*(double__n__ _x_, double__n__ _y_)
    | Returns the component-wise compare of (_x_ < _y_) \|\| (_x_ > _y_) .
| |
| int *isfinite*(float) +
  int__n__ *isfinite*(float__n__) +
  int *isfinite*(double) +
  long__n__ *isfinite*(double__n__)
    | Test for finite value.
| int *isinf*(float) +
  int__n__ *isinf*(float__n__) +
  int *isinf*(double) +
  long__n__ *isinf*(double__n__)
    | Test for infinity value (positive or negative).
| int *isnan*(float) +
  int__n__ *isnan*(float__n__) +
  int *isnan*(double) +
  long__n__ *isnan*(double__n__)
    | Test for a NaN.
| int *isnormal*(float) +
  int__n__ *isnormal*(float__n__) +
  int *isnormal*(double) +
  long__n__ *isnormal*(double__n__)
| Test for a normal value.
| int *isordered*(float _x_, float _y_) +
  int__n__ *isordered*(float__n__ _x_, float__n__ _y_) +
  int *isordered*(double _x_, double _y_) +
  long__n__ *isordered*(double__n__ _x_, double__n__ _y_)
    | Test if arguments are ordered.
     *isordered*() takes arguments _x_ and _y_, and returns the result
     *isequal*(_x_, _x_) && *isequal*(_y_, _y_).
| int *isunordered*(float _x_, float _y_) +
  int__n__ *isunordered*(float__n__ _x_, float__n__ _y_) +
  int *isunordered*(double _x_, double _y_) +
  long__n__ *isunordered*(double__n__ _x_, double__n__ _y_)
    | Test if arguments are unordered.
     *isunordered*() takes arguments _x_ and _y_, returning non-zero if _x_
     or _y_ is NaN, and zero otherwise.
| int *signbit*(float) +
  int__n__ *signbit*(float__n__) +
  int *signbit*(double) +
  long__n__ *signbit*(double__n__)
    | Test for sign bit.
     The scalar version of the function returns a 1 if the sign bit in the
     float is set else returns 0.
     The vector version of the function returns the following for each
     component in `float__n__`: -1 (i.e all bits set) if the sign bit in the
     float is set else returns 0.
| |
| int *any*(igentype _x_)

Scalar inputs to *any* are <<unified-spec, deprecated by>> OpenCL C version
3.0.
    | Returns 1 if the most significant bit of _x_ (for scalar inputs) or
      any component of _x_ (for vector inputs) is set; otherwise returns 0.
| int *all*(igentype _x_)

Scalar inputs to *all* are <<unified-spec, deprecated by>> OpenCL C version
3.0.
    | Returns 1 if the most significant bit of _x_ (for scalar inputs) or
      all components of _x_ (for vector inputs) is set; otherwise returns 0.
| |
| gentype *bitselect*(gentype _a_, gentype _b_, gentype _c_)
   | Each bit of the result is the corresponding bit of _a_ if the
     corresponding bit of _c_ is 0.
     Otherwise it is the corresponding bit of _b_.
| gentype **select**(gentype _a_, gentype _b_, igentype _c_) +
  gentype **select**(gentype _a_, gentype _b_, ugentype _c_)
    | For each component of a vector type,

      _result[i]_ = if MSB of _c[i]_ is set ? _b[i]_ : _a[i]_.

      For a scalar type, _result_ = _c_ ? _b_ : _a_.

      `igentype` and `ugentype` must have the same number of elements and
      bits as `gentype` footnote:[{fn-select-vs-ternary}].
|====
--


[[vector-data-load-and-store-functions]]
=== Vector Data Load and Store Functions

[open,refpage='vectorDataLoadandStoreFunctions',desc='Vector Data Load and Store Functions',type='freeform',spec='clang',anchor='vector-data-load-and-store-functions',xrefs='',alias='vloadn vload_half vload_halfn vloada_halfn vstoren vstore_half vstore_halfn vstorea_halfn']
--

The <<table-vector-loadstore, following table>> describes the list of supported
functions that allow you to read and write vector types from a pointer to
memory.
We use the generic type `gentype` to indicate the built-in data types
`char`, `uchar`, `short`, `ushort`, `int`, `uint`, `long` footnote:[{fn-int64-supported}], `ulong`,
`float` or `double` footnote:[{fn-double-supported}].
We use the generic type name `gentype__n__` to represent n-element vectors
of `gentype` elements.
We use the type name `half__n__` to represent n-element vectors of half
elements.
The suffix _n_ is also used in the function names (i.e. *vload__n__*,
*vstore__n__* etc.), where _n_ = 2, 3 footnote:[{fn-vec3-vload-vstore}], 4, 8 or
16.

[[table-vector-loadstore]]
.Built-in Vector Data Load and Store Functions
[cols="7,3",]
|====
| *Function* | *Description*
| gentype__n__ **vload__n__**(size_t _offset_, const {global} gentype *_p_) +
  gentype__n__ **vload__n__**(size_t _offset_, const {local} gentype *_p_) +
  gentype__n__ **vload__n__**(size_t _offset_, const {constant} gentype *_p_) +
  gentype__n__ **vload__n__**(size_t _offset_, const {private} gentype *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  gentype__n__ **vload__n__**(size_t _offset_, const gentype *_p_)
    | Return `sizeof(gentype__n__)` bytes of data, where the first `(__n__ *
      sizeof(gentype))` bytes are read from the address
      computed as `(_p_ {plus} (_offset_ * _n_))`.
      The computed address must be 8-bit aligned if `gentype` is `char` or
      `uchar`; 16-bit aligned if `gentype` is `short` or `ushort`; 32-bit
      aligned if `gentype` is `int`, `uint`, or `float`; and 64-bit aligned
      if `gentype` is `long` or `ulong`.
| void **vstore__n__**(gentype__n__ _data_, size_t _offset_, {global} gentype *_p_) +
  void **vstore__n__**(gentype__n__ _data_, size_t _offset_, {local} gentype *_p_) +
  void **vstore__n__**(gentype__n__ _data_, size_t _offset_, {private} gentype *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  void **vstore__n__**(gentype__n__ _data_, size_t _offset_, gentype *_p_)
    | Write `_n_ * sizeof(gentype)` bytes given by _data_ to the address
      computed as `(_p_ {plus} (_offset_ * _n_))`.
      The computed address must be 8-bit aligned if `gentype` is `char` or
      `uchar`; 16-bit aligned if `gentype` is `short` or `ushort`; 32-bit
      aligned if `gentype` is `int`, `uint`, or `float`; and 64-bit aligned
      if `gentype` is `long` or `ulong`.
| float **vload_half**(size_t _offset_, const {global} half *_p_) +
  float **vload_half**(size_t _offset_, const {local} half *_p_) +
  float **vload_half**(size_t _offset_, const {constant} half *_p_) +
  float **vload_half**(size_t _offset_, const {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  float **vload_half**(size_t _offset_, const half *_p_)
    | Read `sizeof(half)` bytes of data from the address computed as `(_p_
      {plus} _offset_)`.
      The data read is interpreted as a `half` value.
      The `half` value is converted to a `float` value and the `float` value
      is returned.
      The computed read address must be 16-bit aligned.
| float__n__ **vload_half__n__**(size_t _offset_, const {global} half *_p_) +
  float__n__ **vload_half__n__**(size_t _offset_, const {local} half *_p_) +
  float__n__ **vload_half__n__**(size_t _offset_, const {constant} half *_p_) +
  float__n__ **vload_half__n__**(size_t _offset_, const {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  float__n__ **vload_half__n__**(size_t _offset_, const half *_p_)
    | Read `(_n_ * sizeof(half))` bytes of data from the address computed as
      `(_p_ {plus} (_offset * n_))`.
      The data read is interpreted as a `half__n__` value.
      The `half__n__` value read is converted to a `float__n__` value and
      the `float__n__` value is returned.
      The computed read address must be 16-bit aligned.
| void **vstore_half**(float _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rte}**(float _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rtz}**(float _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rtp}**(float _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rtn}**(float _data_, size_t _offset_, {global} half *_p_) +

  void **vstore_half**(float _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rte}**(float _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rtz}**(float _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rtp}**(float _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rtn}**(float _data_, size_t _offset_, {local} half *_p_) +

  void **vstore_half**(float _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rte}**(float _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rtz}**(float _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rtp}**(float _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rtn}**(float _data_, size_t _offset_, {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  void **vstore_half**(float _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rte}**(float _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rtz}**(float _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rtp}**(float _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rtn}**(float _data_, size_t _offset_, half *_p_)
    | The `float` value given by _data_ is first converted to a `half` value
      using the appropriate rounding mode.
      The `half` value is then written to the address computed as `(_p_
      {plus} _offset_)`.
      The computed address must be 16-bit aligned.

      *vstore_half* uses the default rounding mode.
      The default rounding mode is round to nearest even.
| void **vstore_half__n__**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rte}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rtz}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rtp}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rtn}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +

  void **vstore_half__n__**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rte}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rtz}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rtp}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rtn}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +

  void **vstore_half__n__**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rte}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rtz}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rtp}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rtn}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  void **vstore_half__n__**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rte}**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rtz}**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rtp}**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rtn}**(float__n__ _data_, size_t _offset_, half *_p_)
    | The `float__n__` value given by _data_ is converted to a `half__n__`
      value using the appropriate rounding mode.
      `_n_ * sizeof(half)` bytes from the `half__n__` value are then written to
      the address computed as `(_p_
      {plus} (_offset_ * _n_))`.
      The computed address must be 16-bit aligned.

      *vstore_half__n__* uses the default rounding mode.
      The default rounding mode is round to nearest even.
| void **vstore_half**(double _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rte}**(double _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rtz}**(double _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rtp}**(double _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half{rtn}**(double _data_, size_t _offset_, {global} half *_p_) +

  void **vstore_half**(double _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rte}**(double _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rtz}**(double _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rtp}**(double _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half{rtn}**(double _data_, size_t _offset_, {local} half *_p_) +

  void **vstore_half**(double _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rte}**(double _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rtz}**(double _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rtp}**(double _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half{rtn}**(double _data_, size_t _offset_, {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  void **vstore_half**(double _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rte}**(double _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rtz}**(double _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rtp}**(double _data_, size_t _offset_, half *_p_) +
  void **vstore_half{rtn}**(double _data_, size_t _offset_, half *_p_)
    | The `double` value given by _data_ is first converted to a `half`
      value using the appropriate rounding mode.
      The `half` value is then written to the address computed as `(_p_
      {plus} _offset_)`.
      The computed address must be 16-bit aligned.

      *vstore_half* uses the default rounding mode.
      The default rounding mode is round to nearest even.
| void **vstore_half__n__**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rte}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rtz}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rtp}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstore_half__n__{rtn}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +

  void **vstore_half__n__**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rte}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rtz}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rtp}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstore_half__n__{rtn}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +

  void **vstore_half__n__**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rte}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rtz}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rtp}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstore_half__n__{rtn}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  void **vstore_half__n__**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rte}**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rtz}**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rtp}**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstore_half__n__{rtn}**(double__n__ _data_, size_t _offset_, half *_p_)
    | The `double__n__` value given by _data_ is converted to a `half__n__`
      value using the appropriate rounding mode.
      `_n_ * sizeof(half)` bytes from the `half__n__` value are then written to
      the address computed as `(_p_ {plus} (_offset_ * _n_))`.
      The computed address must be 16-bit aligned.

      *vstore_half__n__* uses the default rounding mode.
      The default rounding mode is round to nearest even.
| float__n__ **vloada_half__n__**(size_t _offset_, const {global} half *_p_) +
  float__n__ **vloada_half__n__**(size_t _offset_, const {local} half *_p_) +
  float__n__ **vloada_half__n__**(size_t _offset_, const {constant} half *_p_) +
  float__n__ **vloada_half__n__**(size_t _offset_, const {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  float__n__ **vloada_half__n__**(size_t _offset_, const half *_p_)
    | For n = 2, 4, 8 and 16, read `sizeof(half__n__)` bytes of data from
      the address computed as (_p_ + (_offset_ * _n_)).
      The data read is interpreted as a `half__n__` value.
      The `half__n__` value read is converted to a `float__n__` value and
      the `float__n__` value is returned.
      The computed address must be aligned to `sizeof(half__n__)` bytes.

      For n = 3, *vloada_half3* reads a `half3` from the address computed as
      `(_p_ {plus} (_offset * 4_))` and returns a `float3`.
      The computed address must be aligned to `sizeof(half)` * 4 bytes.

| void **vstorea_half__n__**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rte}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rtz}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rtp}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rtn}**(float__n__ _data_, size_t _offset_, {global} half *_p_) +

  void **vstorea_half__n__**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rte}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rtz}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rtp}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rtn}**(float__n__ _data_, size_t _offset_, {local} half *_p_) +

  void **vstorea_half__n__**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rte}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rtz}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rtp}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rtn}**(float__n__ _data_, size_t _offset_, {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  void **vstorea_half__n__**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rte}**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rtz}**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rtp}**(float__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rtn}**(float__n__ _data_, size_t _offset_, half *_p_)
    | The `float__n__` value given by _data_ is converted to a `half__n__`
      value using the appropriate rounding mode.

      For n = 2, 4, 8 and 16, the `half__n__` value is written to the
      address computed as `(_p_ {plus} (_offset_ * _n_))`.
      The computed address must be aligned to `sizeof(half__n__)` bytes.

      For n = 3, the `half3` value is written
      to the address computed as `(_p_ {plus} (_offset_ * 4))`.
      The computed address must be aligned to `sizeof(half) * 4` bytes.

      *vstorea_half__n__* uses the default rounding mode.
      The default rounding mode is round to nearest even.
| void **vstorea_half__n__**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rte}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rtz}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rtp}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +
  void **vstorea_half__n__{rtn}**(double__n__ _data_, size_t _offset_, {global} half *_p_) +

  void **vstorea_half__n__**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rte}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rtz}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rtp}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +
  void **vstorea_half__n__{rtn}**(double__n__ _data_, size_t _offset_, {local} half *_p_) +

  void **vstorea_half__n__**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rte}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rtz}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rtp}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +
  void **vstorea_half__n__{rtn}**(double__n__ _data_, size_t _offset_, {private} half *_p_) +

  For OpenCL C 2.0, or OpenCL C 3.0 or newer with the
  `+__opencl_c_generic_address_space+` feature: +

  void **vstorea_half__n__**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rte}**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rtz}**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rtp}**(double__n__ _data_, size_t _offset_, half *_p_) +
  void **vstorea_half__n__{rtn}**(double__n__ _data_, size_t _offset_, half *_p_)
    | The `double__n__` value is converted to a `half__n__` value using the
      appropriate rounding mode.

      For n = 2, 4, 8 or 16, the `half__n__` value is written to the address
      computed as `(_p_ {plus} (_offset_ * _n_))`.
      The computed address must be aligned to `sizeof(half__n__)` bytes.

      For n = 3, the `half3` value is written
      to the address computed as `(_p_ {plus} (_offset_ * 4))`.
      The computed address must be aligned to `sizeof(half) * 4` bytes.

      *vstorea_half__n__* uses the default rounding mode.
      The default rounding mode is round to nearest even.
|====

The results of vector data load and store functions are undefined if the
address being read from or written to is not correctly aligned as described
in <<table-vector-loadstore>>.
The pointer argument p can be a pointer to `global`, `local`, or `private`
memory for store functions described in <<table-vector-loadstore>>.
The pointer argument p can be a pointer to `global`, `local`, `constant`, or
`private` memory for load functions described in <<table-vector-loadstore>>.

[NOTE]
====
The vector data load and store functions variants that take pointer
arguments which point to the generic address space are also supported.
====
--


[[synchronization-functions]]
=== Synchronization Functions

[open,refpage='syncFunctions',desc='Synchronization Functions',type='freeform',spec='clang',anchor='synchronization-functions',alias='barrier work_group_barrier']
--
The following table describes built-in functions to synchronize the work-items
in a work-group.

// Editors note: The table column widths are chosen so the description
// of these functions fits onto a single page.  This avoids an error
// from optimize-pdf and preserves the entire contents of the table.
// If an alternative solution to this issue is discovered then the
// table widths can be re-adjusted.

[[table-builtin-synchronization]]
.Built-in Work-Group Synchronization Functions
[cols="3,7",]
|====
| *Function* | *Description*

| void *barrier*( +
  cl_mem_fence_flags _flags_) +

  For OpenCL C 2.0 or newer, as an alias for *barrier*: +

  void *work_group_barrier*( +
  cl_mem_fence_flags _flags_) +

  void *work_group_barrier*( +
  cl_mem_fence_flags _flags_, +
  memory_scope _scope_)
| For these functions, if any work-item in a work-group encounters a
  barrier, the barrier must be encountered by all work-items in the
  work-group before any are allowed to continue execution beyond the
  barrier.

  If the barrier is inside a conditional statement, then all
  work-items in the work-group must enter the conditional if any work-item in the work-group enters the
  conditional statement and executes the barrier.

  If the barrier is inside a loop, then all work-items in the work-group must execute
  the barrier on each iteration of the loop if any work-item executes the barrier on that iteration.

  The *barrier* and *work_group_barrier* functions can specify which
  memory operations become visible to the appropriate memory scope
  identified by _scope_ footnote:[{fn-memory-scope-restrictions}].
  The _flags_ argument specifies the memory address spaces.
  This is a bitfield and can be set to 0 or a combination of the
  following values OR'ed together.
  When these flags are OR'ed together the barrier acts as a
  combined barrier for all address spaces specified by the flags
  ordering memory accesses both within and across the specified address
  spaces.
  For *barrier* and the *work_group_barrier* variant that does not take a
  memory scope, the _scope_ is `memory_scope_work_group`.

  `CLK_LOCAL_MEM_FENCE` - ensure
  that all `local` memory accesses become visible to all work-items in the
  work-group.
  Note that the value of _scope_ is ignored as the memory scope is
  always `memory_scope_work_group`.

  `CLK_GLOBAL_MEM_FENCE` - ensure that
  all `global` memory accesses become visible to the appropriate memory scope
  as given by _scope_.

  `CLK_IMAGE_MEM_FENCE` - ensure that all image memory accesses
  become visible to the appropriate scope given by _scope_.
  The value of _scope_ must be `memory_scope_work_group`.

  The values of _flags_ and _scope_ must be the same for all work-items
  in the work-group.
|====
--

NOTE: The functionality described in the following table <<unified-spec,
requires>> support for OpenCL 3.0 or newer and the `+__opencl_c_subgroups+`
feature.

The following table describes built-in functions to synchronize the work-items
in a subgroup.

.Built-in Subgroup Synchronization Functions
[cols="3,7",options="header",]
|====
| *Function*
| *Description*

| void **sub_group_barrier**( +
  cl_mem_fence_flags _flags_) +

  void **sub_group_barrier**( +
  cl_mem_fence_flags _flags_, +
  memory_scope _scope_)

| For these functions, if any work-item in a subgroup encounters a
  *sub_group_barrier*, the barrier must be encountered by all work-items in the
  subgroup before any are allowed to continue execution beyond the barrier.

  If *sub_group_barrier* is inside a conditional statement, then all
  work-items within the subgroup must enter the conditional if any work-item in
  the subgroup enters the conditional statement and executes the
  *sub_group_barrier*.

  If the *sub_group_barrier* is inside a loop, then all work-items in the subgroup
  must execute the barrier on each iteration of the loop if any work-item executes the barrier on that iteration.

  The *sub_group_barrier* function can specify which
  memory operations become visible to the appropriate memory scope
  identified by _scope_.
  The _flags_ argument specifies the memory address spaces.
  This is a bitfield and can be set to 0 or a combination of the
  following values OR'ed together.
  When these flags are OR'ed together the barrier acts as a
  combined barrier for all address spaces specified by the flags
  ordering memory accesses both within and across the specified address
  spaces.
  For the *sub_group_barrier* variant that does not take a
  memory scope, the _scope_ is `memory_scope_sub_group`.
  
  `CLK_LOCAL_MEM_FENCE` - The *sub_group_barrier* function will either flush
  any variables stored in local memory or queue a memory fence to ensure
  correct ordering of memory operations to local memory.

  `CLK_GLOBAL_MEM_FENCE` - The *sub_group_barrier* function will queue a
  memory fence to ensure correct ordering of memory operations to global
  memory.
  This can be useful when work-items, for example, write to buffer objects
  and then want to read the updated data from these buffer objects.

  `CLK_IMAGE_MEM_FENCE` - The *sub_group_barrier* function will queue a memory
  fence to ensure correct ordering of memory operations to image objects.
  This can be useful when work-items, for example, write to image objects
  and then want to read the updated data from these image objects.

  The value of _scope_ must match requirements of the
  <<atomic-restrictions,atomic restrictions section>>.

|====


[[legacy-mem-fence-functions]]
=== Legacy Explicit Memory Fence Functions

[open,refpage='legacyFenceFunctions',desc='Legacy Explicit Memory Fence Functions',type='freeform',spec='clang',anchor='legacy-mem-fence-functions',alias='mem_fence read_mem_fence write_mem_fence']
--
IMPORTANT: The memory fence functions described in this sub-section are
<<unified-spec, deprecated by>> OpenCL C 2.0.

The OpenCL C programming language implements the following explicit memory fence functions to provide ordering between memory operations of a work-item.

[[table-builtin-explicit-memory-fences]]
.Built-in Explicit Memory Fence Functions
[cols="3,7",]
|====
| *Function* | *Description*

| void *mem_fence*( +
  cl_mem_fence_flags _flags_) +

| Orders loads and stores of a work-item executing a kernel.  This means that
  loads and stores preceding the *mem_fence* will be committed to memory
  before any loads and stores following the *mem_fence*.

  The _flags_ argument specifies the memory address space and can be set to a
  combination of the following literal values:

  `CLK_LOCAL_MEM_FENCE` +
  `CLK_GLOBAL_MEM_FENCE`

  The value of _flags_ must be the same for all work-items in the work-group.

| void *read_mem_fence*( +
  cl_mem_fence_flags _flags_) +

| Read memory barrier that orders only loads.

  The _flags_ argument specifies the memory address space and can be set to a
  combination of the following literal values:

  `CLK_LOCAL_MEM_FENCE` +
  `CLK_GLOBAL_MEM_FENCE`

  The value of _flags_ must be the same for all work-items in the work-group.

| void *write_mem_fence*( +
  cl_mem_fence_flags _flags_) +

| Write memory barrier that orders only stores.

  The _flags_ argument specifies the memory address space and can be set to a
  combination of the following literal values:

  `CLK_LOCAL_MEM_FENCE` +
  `CLK_GLOBAL_MEM_FENCE`

  The value of _flags_ must be the same for all work-items in the work-group.

|====
--


[[address-space-qualifier-functions]]
=== Address Space Qualifier Functions

[open,refpage='addressSpaceQualifierFuncs',desc='Address Space Qualifier Functions',type='freeform',spec='clang',anchor='address-space-qualifier-functions',xrefs='qualifiers',alias='get_fence to_global to_local to_private']
--

NOTE: The functionality described in this section <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and the
`+__opencl_c_generic_address_space+` feature.

This section describes built-in functions to safely convert from pointers
to the generic address space to pointers to named address spaces, and to
query the appropriate fence flags for a pointer to the generic address space.
We use the generic type name `gentype` to indicate any of the built-in data
types supported by OpenCL C or a user defined type.

[[table-builtin-address-qualifier]]
.Built-in Address Space Qualifier Functions
[cols=",",]
|====
| *Function* | *Description*
| global gentype * **to_global**(gentype *_ptr_) +
  const global gentype * **to_global**(const gentype *_ptr_)
    | Returns a pointer that points to a region in the `global` address
      space if *to_global* can cast _ptr_ to the `global` address space.
      Otherwise it returns `NULL`.
| local gentype * **to_local**(gentype *_ptr_) +
  const local gentype * **to_local**(const gentype *_ptr_)
    | Returns a pointer that points to a region in the `local` address space
      if *to_local* can cast _ptr_ to the local address space.
      Otherwise it returns `NULL`.
| private gentype * **to_private**(gentype *_ptr_) +
  const private gentype * **to_private**(const gentype *_ptr_)
    | Returns a pointer that points to a region in the `private` address
      space if *to_private* can cast _ptr_ to the `private` address space.
      Otherwise it returns `NULL`.
| cl_mem_fence_flags **get_fence**(gentype *_ptr_) +
  cl_mem_fence_flags **get_fence**(const gentype *_ptr_)
    | Returns a valid memory fence value for _ptr_.
|====
--


[[async-copies]]
=== Async Copies from Global to Local Memory, Local to Global Memory, and Prefetch

[open,refpage='asyncCopyFunctions',desc='Async Copy Functions',type='freeform',spec='clang',anchor='async-copies',xrefs='',alias='async_work_group_copy async_work_group_strided_copy prefetch wait_group_events']
--

The OpenCL C programming language implements the <<table-builtin-async-copy,
following functions>> that provide asynchronous copies between `global` and
local memory and a prefetch from `global` memory.

We use the generic type name `gentype` to indicate the built-in data types char,
`char{2|3|4|8|16}`, `uchar`, `uchar{2|3|4|8|16}`, `short`, `short{2|3|4|8|16}`,
`ushort`, `ushort{2|3|4|8|16}`, `int`, `int{2|3|4|8|16}`, `uint`,
`uint{2|3|4|8|16}`, `long` footnote:[{fn-int64-supported}], `long{2|3|4|8|16}`,
`ulong`, `ulong{2|3|4|8|16}`, `float`, `float{2|3|4|8|16}`, or `double`
footnote:[{fn-double-supported}], `double{2|3|4|8|16}` as the type for
the arguments unless otherwise stated footnote:[{fn-vec3-async-copy}].

[[table-builtin-async-copy]]
.Built-in Async Copy and Prefetch Functions
[cols=",",]
|====
| *Function* | *Description*
| event_t **async_work_group_copy**({local} gentype _*dst_,
  const {global} gentype *_src_, size_t _num_gentypes_, event_t _event_) +
  event_t **async_work_group_copy**({global} gentype _*dst_,
  const {local} gentype *_src_, size_t _num_gentypes_, event_t _event_)
    | Perform an async copy of _num_gentypes_ gentype elements from _src_ to
      _dst_.
      The async copy is performed by all work-items in a work-group and this
      built-in function must therefore be encountered by all work-items in a
      work-group executing the kernel with the same argument values;
      otherwise the results are undefined.
      This rule applies to ND-ranges implemented with uniform and
      non-uniform work-groups.

      Returns an event object that can be used by *wait_group_events* to
      wait for the async copy to finish.
      The _event_ argument can also be used to associate the
      *async_work_group_copy* with a previous async copy allowing an event
      to be shared by multiple async copies; otherwise _event_ should be
      zero.

      0 can be implicitly and explicitly cast to `event_t` type.

      If _event_ argument is non-zero, the event object supplied in _event_
      argument will be returned.

      This function does not perform any implicit synchronization of source
      data such as using a *barrier* before performing the copy.
| |
| event_t **async_work_group_strided_copy**({local} gentype _*dst_,
  const {global} gentype *_src_, size_t _num_gentypes_, size_t _src_stride_,
  event_t _event_) +
  event_t **async_work_group_strided_copy**({global} gentype _*dst_,
  const {local} gentype *_src_, size_t _num_gentypes_, size_t _dst_stride_,
  event_t _event_)
    | Perform an async gather of _num_gentypes_ `gentype` elements from
      _src_ to _dst_.
      The _src_stride_ is the stride in elements for each `gentype`
      element read from _src_.
      The _dst_stride_ is the stride in elements for each `gentype` element
      written to _dst_.
      The async gather is performed by all work-items in a work-group.
      This built-in function must therefore be encountered by all work-items
      in a work-group executing the kernel with the same argument values;
      otherwise the results are undefined.
      This rule applies to ND-ranges implemented with uniform and
      non-uniform work-groups

      Returns an event object that can be used by *wait_group_events* to
      wait for the async copy to finish.
      The _event_ argument can also be used to associate the
      *async_work_group_strided_copy* with a previous async copy allowing an
      event to be shared by multiple async copies; otherwise _event_ should
      be zero.

      0 can be implicitly and explicitly cast to event_t type.

      If _event_ argument is non-zero, the event object supplied in _event_
      argument will be returned.

      This function does not perform any implicit synchronization of source
      data such as using a *barrier* before performing the copy.

      The behavior of *async_work_group_strided_copy* is undefined if
      _src_stride_ or _dst_stride_ is 0, or if the _src_stride_ or
      _dst_stride_ values cause the _src_ or _dst_ pointers to exceed the
      upper bounds of the address space during the copy.

      <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.
| |
| void **wait_group_events**(int _num_events_, event_t *_event_list_)
    | Wait for events that identify the *async_work_group_copy* operations
      to complete.
      The event objects specified in _event_list_ will be released after the
      wait is performed.

      This function must be encountered by all work-items in a work-group
      executing the kernel with the same _num_events_ and event objects
      specified in _event_list_; otherwise the results are undefined.
      This rule applies to ND-ranges implemented with uniform and
      non-uniform work-groups
| |
| void **prefetch**(const {global} gentype *_p_, size_t _num_gentypes_)
    | Prefetch `_num_gentypes_ * sizeof(gentype)` bytes into the global
      cache.
      The prefetch instruction is applied to a work-item in a work-group and
      does not affect the functional behavior of the kernel.
|====

[NOTE]
====
The kernel must wait for the completion of all async copies using the
*wait_group_events* built-in function before exiting; otherwise the behavior
is undefined.
====
--


[[atomic-functions]]
=== Atomic Functions

IMPORTANT: The C11 style atomic functions in this sub-section <<unified-spec,
require>> support for OpenCL 2.0 or newer.  However, this statement does not
apply to the <<atomic-legacy, "OpenCL C 1.x Legacy Atomics">> descriptions at
the end of this sub-section.

The OpenCL C programming language implements a subset of the C11 atomics
(refer to <<C11-spec,section 7.17 of the C11 Specification>>) and
synchronization operations.
These operations play a special role in making assignments in one work-item
visible to another.
A synchronization operation on one or more memory locations is either an
acquire operation, a release operation, or both an acquire and release
operation footnote:[{fn-atomic-no-consume}].
A synchronization operation without an associated memory location is a fence
and can be either an acquire fence, a release fence or both an acquire and
release fence.
In addition, there are relaxed atomic operations, which are not
synchronization operations, and atomic read-modify-write operations which
have special characteristics.

The types include

[none]
* `memory_order`

which is an enumerated type whose enumerators identify memory ordering
constraints;

[none]
* `memory_scope`

which is an enumerated type whose enumerators identify scope of memory
ordering constraints;

[none]
* `atomic_flag`

which is a 32-bit integer type representing a primitive atomic flag; and
several atomic analogs of integer types.

In the following operation definitions:

  * An A refers to one of the atomic types.
  * A C refers to its corresponding non-atomic type.
  * An M refers to the type of the other argument for arithmetic operations.
    For atomic integer types, M is C.
  * The functions not ending in explicit have the same semantics as the
    corresponding explicit function with `memory_order_seq_cst` for the
    `memory_order` argument.
  * The functions that do not have `memory_scope` argument have the same
    semantics as the corresponding functions with the `memory_scope`
    argument set to `memory_scope_device`.

[NOTE]
====
With fine-grained system SVM, sharing happens at the granularity of
individual loads and stores anywhere in host memory.
Memory consistency is always guaranteed at synchronization points, but to
obtain finer control over consistency, the OpenCL atomics functions may be
used to ensure that the updates to individual data values made by one unit
of execution are visible to other execution units.
In particular, when a host thread needs fine control over the consistency of
memory that is shared with one or more OpenCL devices, it must use atomic
and fence operations that are compatible with the C11 atomic operations.

We can't require <<C11-spec,C11 atomics>> since host programs can be
implemented in other programming languages and versions of C or {cpp}, but we
do require that the host programs use atomics and that those atomics be
compatible with those in C11.
====

ifdef::refpageOnly[]
// This is an index page, generated only in the OpenCL refpages and not in
// the Specification. It's here so the index remains consistent with the
// spec.
[open,refpage='atomicFunctions',desc='Atomic Functions',type='freeform',spec='clang',anchor='atomic-functions',xrefs='memory_order memory_scope']
--
OpenCL C includes a variety of atomic functions, described individually in the
following sections:

  * link:ATOMIC_VAR_INIT.html[ATOMIC_VAR_INIT macro]
  * link:atomic_init.html[atomic_init function]
  * link:atomic_work_item_fence.html[Fences]
  * link:atomicTypes.html[Atomic Integer And Floating-Point Types]
  * link:atomic_store.html[atomic_store Functions]
  * link:atomic_load.html[atomic_load Functions]
  * link:atomic_exchange.html[atomic_exchange Functions]
  * link:atomic_compare_exchange.html[atomic_compare_exchange Functions]
  * link:atomic_fetch_key.html[atomic_fetch and modify Functions]
  * link:atomic_flag.html[Atomic Flag Type and Operations]
  * link:atomicFlagTestAndSet.html[atomic_flag_test_and_set Functions]
  * link:atomic_flag_clear.html[atomic_flag_clear Functions]
  * link:atomicRestrictions.html[Restrictions on Atomic Operations]
--
endif::refpageOnly[]


[[the-atomic_var_init-macro]]
==== The `ATOMIC_VAR_INIT` macro

[open,refpage='ATOMIC_VAR_INIT',desc='ATOMIC_VAR_INIT macro',type='freeform',spec='clang',anchor='the-atomic_var_init-macro',xrefs='atomicFunctions atomic_init']
--

The `ATOMIC_VAR_INIT` macro expands to a token sequence suitable for
initializing an atomic object of a type that is initialization-compatible
with value.
An atomic object with automatic storage duration that is not explicitly
initialized using `ATOMIC_VAR_INIT` is initially in an indeterminate state;
however, the default (zero) initialization for objects with `static` storage
duration is guaranteed to produce a valid state.

[source,c]
----------
#define ATOMIC_VAR_INIT(C value)
----------

This macro can only be used to initialize atomic objects that are declared
in program scope in the `global` address space.

Examples:

[source,c]
----------
global atomic_int guide = ATOMIC_VAR_INIT(42);
----------

Concurrent access to the variable being initialized, even via an atomic
operation, constitutes a data-race.
--


[[the-atomic_init-function]]
==== The atomic_init function

[open,refpage='atomic_init',desc='The atomic_init function',type='freeform',spec='clang',anchor='the-atomic_init-function',xrefs='atomicFunctions ATOMIC_VAR_INIT']
--

The `atomic_init` function non-atomically initializes the atomic object
pointed to by obj to the value value.

[source,c]
----------
// Requires OpenCL C 3.0 or newer.
void atomic_init(volatile __global A *obj, C value)
void atomic_init(volatile __local A *obj, C value)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
void atomic_init(volatile A *obj, C value)
----------

Examples:

[source,c]
----------
local atomic_int guide;
if (get_local_id(0) == 0)
    atomic_init(&guide, 42);
work_group_barrier(CLK_LOCAL_MEM_FENCE);
----------

NOTE: The function variant that uses the generic address space, i.e. no
explicit address space is listed, <<unified-spec, requires>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--


[[order-and-consistency]]
==== Order and Consistency

[open,refpage='memory_order',desc='Memory Operation Order and Consistency',type='freeform',spec='clang',anchor='order-and-consistency']
--

The enumerated type `memory_order` specifies the detailed regular
(non-atomic) memory synchronization operations as defined in
<<C11-spec,section 5.1.2.4 of the C11 Specification>>, and may provide for
operation ordering.
The following table lists the enumeration constants:

[[table-memory-orders]]
//.Memory Order Enumeration Constants
[cols=",",]
|====
| *Memory Order* | *Additional Notes*
| `memory_order_relaxed`
    | <<unified-spec, Requires>> support for OpenCL C 2.0 or newer.
| `memory_order_acquire`
    | <<unified-spec, Requires>> support for OpenCL C 2.0, but in OpenCL C 3.0
      or newer some uses require the `+__opencl_c_atomic_order_acq_rel+`
      feature.
| `memory_order_release`
    | <<unified-spec, Requires>> support for OpenCL C 2.0, but in OpenCL C 3.0
      or newer some uses require the `+__opencl_c_atomic_order_acq_rel+`
      feature.
| `memory_order_acq_rel`
    | <<unified-spec, Requires>> support for OpenCL C 2.0, but in OpenCL C 3.0
      or newer some uses require the `+__opencl_c_atomic_order_acq_rel+`
      feature.
| `memory_order_seq_cst`
    | <<unified-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_atomic_order_seq_cst+` feature.
|====

The `memory_order` can be used when performing atomic operations to `global`
or `local` memory.
--


[[memory-scope]]
==== Memory Scope

[open,refpage='memory_scope',desc='Memory Operation Scope',type='freeform',spec='clang',anchor='memory-scope']
--

The enumerated type `memory_scope` specifies whether the memory ordering
constraints given by `memory_order` apply to work-items in a subgroup,
work-items in a work-group, or work-items from one or more kernels executing
on the device or across devices (in the case of shared virtual memory).
The following table lists the enumeration constants:

[[table-memory-scopes]]
//.Memory Scope Enumeration Constants
[cols=",",]
|====
| *Memory Scope* | *Additional Notes*
| `memory_scope_work_item`
    | `memory_scope_work_item` can only be used with `atomic_work_item_fence`
      with flags set to `CLK_IMAGE_MEM_FENCE`.
      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer.
| `memory_scope_sub_group`
    | <<unified-spec, Requires>> support for OpenCL C 3.0 or newer and the
      `+__opencl_c_subgroups+` feature.
| `memory_scope_work_group`
    | <<unified-spec, Requires>> support for OpenCL C 2.0 or newer.
| `memory_scope_device`
    | <<unified-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_atomic_scope_device+` feature.
| `memory_scope_all_svm_devices`
    | <<unified-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_atomic_scope_all_devices+` feature.
| `memory_scope_all_devices`
    | An alias for `memory_scope_all_svm_devices`.
      <<unified-spec, Requires>> support for OpenCL C 3.0 or newer and the
      `+__opencl_c_atomic_scope_all_devices+` feature.
|====

// This is no longer correct given `memory_scope_sub_group`.
//The memory scope should only be used when performing atomic operations to
//global memory.
//Atomic operations to `local` memory only guarantee memory ordering in the
//work-group not across work-groups and therefore ignore the `memory_scope`
//value.
--


[[fences]]
==== Fences

[open,refpage='atomic_work_item_fence',desc='Fences',type='freeform',spec='clang',anchor='fences',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
The following fence operations are supported.

[source,c]
----------
void atomic_work_item_fence(cl_mem_fence_flags flags,
                            memory_order order,
                            memory_scope scope)

// Older syntax memory fences are equivalent to atomic_work_item_fence with the
// same flags parameter, memory_scope_work_group scope, and ordering follows:
void mem_fence(cl_mem_fence_flags flags)        // memory_order_acq_rel
void read_mem_fence(cl_mem_fence_flags flags)   // memory_order_acquire
void write_mem_fence(cl_mem_fence_flags flags)  // memory_order_release
----------

`flags` must be set to `CLK_GLOBAL_MEM_FENCE`, `CLK_LOCAL_MEM_FENCE`,
`CLK_IMAGE_MEM_FENCE` or a combination of these values ORed together;
otherwise the behavior is undefined.
The behavior of calling `atomic_work_item_fence` with `CLK_IMAGE_MEM_FENCE`
ORed together with either `CLK_GLOBAL_MEM_FENCE` or `CLK_LOCAL_MEM_FENCE` is
equivalent to calling `atomic_work_item_fence` individually for
`CLK_IMAGE_MEM_FENCE` and the other flags.
Passing both `CLK_GLOBAL_MEM_FENCE` and `CLK_LOCAL_MEM_FENCE` to
`atomic_work_item_fence` will synchronize memory operations to both `local`
and `global` memory through some shared atomic action, as described in
<<opencl-spec,section 3.3.6.2 of the OpenCL Specification>>.

Depending on the value of order, this operation:

  * has no effects, if _order_ == `memory_order_relaxed`.
  * is an acquire fence, if _order_ == `memory_order_acquire`.
  * is a release fence, if _order_ == `memory_order_release`.
  * is both an acquire fence and a release fence, if _order_ ==
    `memory_order_acq_rel`.
  * is a sequentially consistent acquire and release fence, if _order_ ==
    `memory_order_seq_cst`.

For images declared with the `read_write` qualifier, the
`atomic_work_item_fence` must be called to make sure that writes to the
image by a work-item become visible to that work-item on subsequent reads to
that image by that work-item.

NOTE: The use of memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.
--


[[atomic-integer-and-floating-point-types]]
==== Atomic integer and floating-point types

[open,refpage='atomicTypes',desc='Atomic Integer And Floating-Point Types',type='freeform',spec='clang',anchor='atomic-integer-and-floating-point-types',xrefs='atomicFunctions',alias='atomic_int atomic_uint atomic_long atomic_ulong atomic_float atomic_double atomic_intptr_t atomic_uintptr_t atomic_size_t atomic_ptrdiff_t']
--

The list of supported atomic type names are:

[none]
* `atomic_int`
* `atomic_uint`
* `atomic_long` footnote:atomic-int64-supported[{fn-atomic-int64-supported}]
* `atomic_ulong` footnote:atomic-int64-supported[]
* `atomic_float`
* `atomic_double` footnote:[{fn-atomic-double-supported}]
* `atomic_intptr_t` footnote:atomic-size_t-supported[{fn-atomic-size_t-supported}]
* `atomic_uintptr_t` footnote:atomic-size_t-supported[]
* `atomic_size_t` footnote:atomic-size_t-supported[]
* `atomic_ptrdiff_t` footnote:atomic-size_t-supported[]

Arguments to a kernel can be declared to be a pointer to the above atomic
types or the atomic_flag type.

The representation of atomic integer, floating-point and pointer types have
the same size as their corresponding regular types.
The atomic_flag type must be implemented as a 32-bit integer.
--


[[operations-on-atomic-types]]
==== Operations on atomic types

There are only a few kinds of operations on atomic types, though there are
many instances of those kinds.
This section specifies each general kind.


[[atomic_store]]
===== *The atomic_store Functions*

[open,refpage='atomic_store',desc='The atomic_store Functions',type='freeform',spec='clang',anchor='atomic_store',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
[source,c]
----------
// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
void atomic_store(volatile __global A *object, C desired)
void atomic_store(volatile __local A *object, C desired)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and all of the
// __opencl_c_generic_address_space, __opencl_c_atomic_order_seq_cst and
// __opencl_c_atomic_scope_device features.
void atomic_store(volatile A *object, C desired)

// Requires OpenCL C 3.0 or newer and the __opencl_c_atomic_scope_device
// feature.
void atomic_store_explicit(volatile __global A *object,
                           C desired,
                           memory_order order)
void atomic_store_explicit(volatile __local A *object,
                           C desired,
                           memory_order order)

// Requires OpenCL C 2.0 or OpenCL C 3.0 or newer and both the
// __opencl_c_generic_address_space and __opencl_c_atomic_scope_device
// features.
void atomic_store_explicit(volatile A *object,
                           C desired,
                           memory_order order)

// Requires OpenCL C 3.0 or newer.
void atomic_store_explicit(volatile __global A *object,
                           C desired,
                           memory_order order,
                           memory_scope scope)
void atomic_store_explicit(volatile __local A *object,
                           C desired,
                           memory_order order,
                           memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
void atomic_store_explicit(volatile A *object,
                           C desired,
                           memory_order order,
                           memory_scope scope)
----------

The _order_ argument shall not be `memory_order_acquire`, nor
`memory_order_acq_rel`.
Atomically replace the value pointed to by _object_ with the value of
_desired_.
Memory is affected according to the value of _order_.

NOTE: The non-explicit `atomic_store` function <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and both the
`+__opencl_c_atomic_order_seq_cst+` and `+__opencl_c_atomic_scope_device+`
features.
For the explicit variants, memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.

NOTE: The function variants that use the generic address space, i.e. no
explicit address space is listed, <<unified-spec, require>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--


[[atomic_load]]
===== *The atomic_load Functions*

[open,refpage='atomic_load',desc='The atomic_load Functions',type='freeform',spec='clang',anchor='atomic_load',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
[source,c]
----------
// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
C atomic_load(volatile __global A *object)
C atomic_load(volatile __local A *object)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and all of the
// __opencl_c_generic_address_space, __opencl_c_atomic_order_seq_cst and
// __opencl_c_atomic_scope_device features.
C atomic_load(volatile A *object)

// Requires OpenCL C 3.0 or newer and the __opencl_c_atomic_scope_device
// feature.
C atomic_load_explicit(volatile __global A *object,
                       memory_order order)
C atomic_load_explicit(volatile __local A *object,
                       memory_order order)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and both the
// __opencl_c_generic_address_space and __opencl_c_atomic_scope_device
// features.
C atomic_load_explicit(volatile A *object,
                       memory_order order)

// Requires OpenCL C 3.0 or newer.
C atomic_load_explicit(volatile __global A *object,
                       memory_order order,
                       memory_scope scope)
C atomic_load_explicit(volatile __local A *object,
                       memory_order order,
                       memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
C atomic_load_explicit(volatile A *object,
                       memory_order order,
                       memory_scope scope)
----------

The _order_ argument shall not be `memory_order_release` nor
`memory_order_acq_rel`.
Memory is affected according to the value of _order_.
Atomically returns the value pointed to by _object_.

NOTE: The non-explicit `atomic_load` function <<unified-spec, requires>>
support for OpenCL C 2.0 or OpenCL C 3.0 or newer and both the
`+__opencl_c_atomic_order_seq_cst+` and `+__opencl_c_atomic_scope_device+`
features.
For the explicit variants, memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.

NOTE: The function variants that use the generic address space, i.e. no
explicit address space is listed, <<unified-spec, require>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--


[[atomic_exchange]]
===== *The atomic_exchange Functions*

[open,refpage='atomic_exchange',desc='The atomic_exchange Functions',type='freeform',spec='clang',anchor='atomic_exchange',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
[source,c]
----------
// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
C atomic_exchange(volatile __global A *object, C desired)
C atomic_exchange(volatile __local A *object, C desired)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and all of the
// __opencl_c_generic_address_space, __opencl_c_atomic_order_seq_cst and
// __opencl_c_atomic_scope_device features.
C atomic_exchange(volatile A *object, C desired)

// Requires OpenCL C 3.0 or newer and the __opencl_c_atomic_scope_device
// feature.
C atomic_exchange_explicit(volatile __global A *object,
                           C desired,
                           memory_order order)
C atomic_exchange_explicit(volatile __local A *object,
                           C desired,
                           memory_order order)

// Requires OpenCL C 2.0 or OpenCL C 3.0 or newer and both the
// __opencl_c_generic_address_space and __opencl_c_atomic_scope_device
// feature.
C atomic_exchange_explicit(volatile A *object,
                           C desired,
                           memory_order order)

// Requires OpenCL C 3.0 or newer.
C atomic_exchange_explicit(volatile __global A *object,
                           C desired,
                           memory_order order,
                           memory_scope scope)
C atomic_exchange_explicit(volatile __local A *object,
                           C desired,
                           memory_order order,
                           memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
C atomic_exchange_explicit(volatile A *object,
                           C desired,
                           memory_order order,
                           memory_scope scope)
----------

Atomically replace the value pointed to by object with desired.
Memory is affected according to the value of order.
These operations are read-modify-write operations (as defined by
<<C11-spec,section 5.1.2.4 of the C11 Specification>>).
Atomically returns the value pointed to by object immediately before the
effects.

NOTE: The non-explicit `atomic_exchange` function <<unified-spec, requires>>
support for OpenCL C 2.0 or OpenCL C 3.0 or newer and both the
`+__opencl_c_atomic_order_seq_cst+` and `+__opencl_c_atomic_scope_device+`
features.
For the explicit variants, memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.

NOTE: The function variants that use the generic address space, i.e. no
explicit address space is listed, <<unified-spec, require>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--


[[atomic_compare_exchange]]
===== *The atomic_compare_exchange Functions*

[open,refpage='atomic_compare_exchange',desc='The atomic_compare_exchange Functions',type='freeform',spec='clang',anchor='atomic_compare_exchange',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
[source,c]
----------
// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
bool atomic_compare_exchange_strong(
    volatile __global A *object,
    __global C *expected, C desired)
bool atomic_compare_exchange_strong(
    volatile __global A *object,
    __local C *expected, C desired)
bool atomic_compare_exchange_strong(
    volatile __global A *object,
    __private C *expected, C desired)
bool atomic_compare_exchange_strong(
    volatile __local A *object,
    __global C *expected, C desired)
bool atomic_compare_exchange_strong(
    volatile __local A *object,
    __local C *expected, C desired)
bool atomic_compare_exchange_strong(
    volatile __local A *object,
    __private C *expected, C desired)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and all of the
// __opencl_c_generic_address_space, __opencl_c_atomic_order_seq_cst and
// __opencl_c_atomic_scope_device features.
bool atomic_compare_exchange_strong(
    volatile A *object,
    C *expected, C desired)

// Requires OpenCL C 3.0 or newer.
bool atomic_compare_exchange_strong_explicit(
    volatile __global A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_strong_explicit(
    volatile __global A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_strong_explicit(
    volatile __global A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_strong_explicit(
    volatile __local A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_strong_explicit(
    volatile __local A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_strong_explicit(
    volatile __local A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
bool atomic_compare_exchange_strong_explicit(
    volatile A *object,
    C *expected,
    C desired,
    memory_order success,
    memory_order failure)

// Requires OpenCL C 3.0 or newer.
bool atomic_compare_exchange_strong_explicit(
    volatile __global A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_strong_explicit(
    volatile __global A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_strong_explicit(
    volatile __global A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_strong_explicit(
    volatile __local A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_strong_explicit(
    volatile __local A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_strong_explicit(
    volatile __local A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
bool atomic_compare_exchange_strong_explicit(
    volatile A *object,
    C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)

// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
bool atomic_compare_exchange_weak(
    volatile __global A *object,
    __global C *expected, C desired)
bool atomic_compare_exchange_weak(
    volatile __global A *object,
    __local C *expected, C desired)
bool atomic_compare_exchange_weak(
    volatile __global A *object,
    __private C *expected, C desired)
bool atomic_compare_exchange_weak(
    volatile __local A *object,
    __global C *expected, C desired)
bool atomic_compare_exchange_weak(
    volatile __local A *object,
    __local C *expected, C desired)
bool atomic_compare_exchange_weak(
    volatile __local A *object,
    __private C *expected, C desired)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and all of the
// __opencl_c_generic_address_space, __opencl_c_atomic_order_seq_cst and
// __opencl_c_atomic_scope_device features.
bool atomic_compare_exchange_weak(
    volatile A *object,
    C *expected, C desired)

// Requires OpenCL C 3.0 or newer.
bool atomic_compare_exchange_weak_explicit(
    volatile __global A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_weak_explicit(
    volatile __global A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_weak_explicit(
    volatile __global A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_weak_explicit(
    volatile __local A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_weak_explicit(
    volatile __local A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure)
bool atomic_compare_exchange_weak_explicit(
    volatile __local A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
bool atomic_compare_exchange_weak_explicit(
    volatile A *object,
    C *expected,
    C desired,
    memory_order success,
    memory_order failure)

// Requires OpenCL C 3.0 or newer.
bool atomic_compare_exchange_weak_explicit(
    volatile __global A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_weak_explicit(
    volatile __global A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_weak_explicit(
    volatile __global A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_weak_explicit(
    volatile __local A *object,
    __global C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_weak_explicit(
    volatile __local A *object,
    __local C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
bool atomic_compare_exchange_weak_explicit(
    volatile __local A *object,
    __private C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
bool atomic_compare_exchange_weak_explicit(
    volatile A *object,
    C *expected,
    C desired,
    memory_order success,
    memory_order failure,
    memory_scope scope)
----------

The `failure` argument shall not be `memory_order_release` nor
`memory_order_acq_rel`.
The `failure` argument shall be no stronger than the `success` argument.
Atomically, compares the value pointed to by object for equality with that
in expected, and if _true_, replaces the value pointed to by `object` with
`desired`, and if _false_, updates the value in `expected` with the value
pointed to by `object`.
Further, if the comparison is _true_, memory is affected according to the
value of `success`, and if the comparison is _false_, memory is affected
according to the value of `failure`.
If the comparison is _true_, these operations are atomic read-modify-write operations (as defined by
<<C11-spec,section 5.1.2.4 of the C11 Specification>>).
Otherwise, these operations are atomic load operations.

[NOTE]
====
The effect of the compare-and-exchange operations is

[source,c]
----------
if (memcmp(object, expected, sizeof(*object) == 0)
    memcpy(object, &desired, sizeof(*object));
else
    memcpy(expected, object, sizeof(*object));
----------
====

The weak compare-and-exchange operations may fail spuriously
footnote:[{fn-atomic-weak-rationale}].
That is, even when the contents of memory referred to by `expected` and
`object` are equal, it may return zero and store back to `expected` the same
memory contents that were originally there.

These generic functions return the result of the comparison.

NOTE: The non-explicit `atomic_compare_exchange_strong` and
`atomic_compare_exchange_weak` functions <<unified-spec, requires>> support
for OpenCL C 2.0, or OpenCL C 3.0 or newer and both the
`+__opencl_c_atomic_order_seq_cst+` and `+__opencl_c_atomic_scope_device+`
features.
For the explicit variants, memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.

NOTE: The function variants that use the generic address space, i.e. no
explicit address space is listed, <<unified-spec, require>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--


[[atomic_fetch_key]]
===== *The atomic_fetch and modify Functions*

[open,refpage='atomic_fetch_key',desc='The atomic_fetch and modify Functions',type='freeform',spec='clang',anchor='atomic_fetch_key',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
The following operations perform arithmetic and bitwise computations.
All of these operations are applicable to an object of any atomic integer
type.
The key, operator, and computation correspondence is given in table below:

[cols=",,",]
|====
| *key* | *op*   | *computation*
| `add` | *+*    | addition
| `sub` | *-*    | subtraction
| `or`  | *\|*   | bitwise inclusive or
| `xor` | *^*    | bitwise exclusive or
| `and` | *&*    | bitwise and
| `min` | *min*  | compute min
| `max` | *max*  | compute max
|====

[NOTE]
====
For *atomic_fetch* and modify functions with *key* = `add` or `sub` on
atomic types `atomic_intptr_t` and `atomic_uintptr_t`, `M` is `ptrdiff_t`.
For *atomic_fetch* and modify functions with *key* = `or`, `xor`, `and`,
`min` and `max` on atomic type `atomic_intptr_t`, `M` is `intptr_t`,
and on atomic type `atomic_uintptr_t`, `M` is `uintptr_t`.
====

[source,c]
----------
// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
C atomic_fetch_key(volatile __global A *object, M operand)
C atomic_fetch_key(volatile __local A *object, M operand)

// Requires OpenCL C 2.0, or all of the __opencl_c_generic_address_space,
// __opencl_c_atomic_order_seq_cst and __opencl_c_atomic_scope_device features.
C atomic_fetch_key(volatile A *object, M operand)

// Requires OpenCL C 3.0 or newer and the __opencl_c_atomic_scope_device feature.
C atomic_fetch_key_explicit(volatile __global A *object,
                            M operand,
                            memory_order order)
C atomic_fetch_key_explicit(volatile __local A *object,
                            M operand,
                            memory_order order)

// Requires OpenCL C 2.0 or OpenCL C 3.0 or newer and both the
// __opencl_c_generic_address_space and __opencl_c_atomic_scope_device
// features.
C atomic_fetch_key_explicit(volatile A *object,
                            M operand,
                            memory_order order)

// Requires OpenCL C 3.0 or newer.
C atomic_fetch_key_explicit(volatile __global A *object,
                            M operand,
                            memory_order order,
                            memory_scope scope)
C atomic_fetch_key_explicit(volatile __local A *object,
                            M operand,
                            memory_order order,
                            memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
C atomic_fetch_key_explicit(volatile A *object,
                            M operand,
                            memory_order order,
                            memory_scope scope)
----------

Atomically replaces the value pointed to by object with the result of the
computation applied to the value pointed to by `object` and the given
operand.
Memory is affected according to the value of `order`.
These operations are atomic read-modify-write operations (as defined by
<<C11-spec,section 5.1.2.4 of the C11 Specification>>).
For signed integer types, arithmetic is defined to use two's complement
representation with silent wrap-around on overflow; there are no undefined
results.
For address types, the result may be an undefined address, but the
operations otherwise have no undefined behavior.
Returns atomically the value pointed to by `object` immediately before the
effects.

NOTE: The non-explicit `atomic_fetch_key` functions <<unified-spec, require>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and both the
`+__opencl_c_atomic_order_seq_cst+` and `+__opencl_c_atomic_scope_device+`
features.
For the explicit variants, memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.

NOTE: The function variants that use the generic address space, i.e. no
explicit address space is listed, <<unified-spec, require>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--


[[atomic_flag]]
===== *Atomic Flag Type and Operations*

[open,refpage='atomic_flag',desc='Atomic Flag Type and Operations',type='freeform',spec='clang',anchor='atomic_flag',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
The `atomic_flag` type provides the classic test-and-set functionality.
It has two states, _set_ (value is non-zero) and _clear_ (value is 0).

In OpenCL C 2.0 Operations on an object of type `atomic_flag` shall be
lock-free, in OpenCL C 3.0 or newer they may be lock-free.

The macro `ATOMIC_FLAG_INIT` may be used to initialize an `atomic_flag` to the
_clear_ state.
An `atomic_flag` that is not explicitly initialized with `ATOMIC_FLAG_INIT` is
initially in an indeterminate state.

This macro can only be used for atomic objects that are declared in program
scope in the `global` address space with the `atomic_flag` type.

Example:

[source,c]
----------
global atomic_flag guard = ATOMIC_FLAG_INIT;
----------
--


[[atomic_flag_test_and_set]]
===== *The atomic_flag_test_and_set Functions*

[open,refpage='atomicFlagTestAndSet',desc='The atomic_flag_test_and_set Functions',type='freeform',spec='clang',anchor='atomic_flag_test_and_set',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_init atomic_load atomic_store atomic_work_item_fence',alias='atomic_flag_test_and_set atomic_flag_test_and_set_explicit']
--
[source,c]
----------
// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
bool atomic_flag_test_and_set(
    volatile __global atomic_flag *object)
bool atomic_flag_test_and_set(
    volatile __local atomic_flag *object)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and all of the
// __opencl_c_generic_address_space, __opencl_c_atomic_order_seq_cst and
// __opencl_c_atomic_scope_device features.
bool atomic_flag_test_and_set(
    volatile atomic_flag *object)

// Requires OpenCL C 3.0 or newer and the __opencl_c_atomic_scope_device
// feature.
bool atomic_flag_test_and_set_explicit(
    volatile __global atomic_flag *object,
    memory_order order)
bool atomic_flag_test_and_set_explicit(
    volatile __local atomic_flag *object,
    memory_order order)

// Requires OpenCL C 2.0 or OpenCL C 3.0 or newer and both the
// __opencl_c_generic_address_space and __opencl_c_atomic_scope_device
// features.
bool atomic_flag_test_and_set_explicit(
    volatile atomic_flag *object,
    memory_order order)

// Requires OpenCL C 3.0 or newer.
bool atomic_flag_test_and_set_explicit(
    volatile __global atomic_flag *object,
    memory_order order,
    memory_scope scope)
bool atomic_flag_test_and_set_explicit(
    volatile __local atomic_flag *object,
    memory_order order,
    memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
bool atomic_flag_test_and_set_explicit(
    volatile atomic_flag *object,
    memory_order order,
    memory_scope scope)
----------

Atomically sets the value pointed to by `object` to _true_.
Memory is affected according to the value of `order`.
These operations are atomic read-modify-write operations (as defined by
<<C11-spec,section 5.1.2.4 of the C11 Specification>>).
Returns atomically the value of the `object` immediately before the effects.

NOTE: The non-explicit `atomic_flag_test_and_set` function <<unified-spec,
requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or newer and both the
`+__opencl_c_atomic_order_seq_cst+` and `+__opencl_c_atomic_scope_device+`
features.
For the explicit variants, memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.

NOTE: The function variants that use the generic address space, i.e. no
explicit address space is listed, <<unified-spec, require>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--


[[atomic_flag_clear]]
===== *The atomic_flag_clear Functions*

[open,refpage='atomic_flag_clear',desc='The atomic_flag_clear Functions',type='freeform',spec='clang',anchor='atomic_flag_clear',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
[source,c]
----------
// Requires OpenCL C 3.0 or newer and both the __opencl_c_atomic_order_seq_cst
// and __opencl_c_atomic_scope_device features.
void atomic_flag_clear(volatile __global atomic_flag *object)
void atomic_flag_clear(volatile __local atomic_flag *object)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and all of the
// __opencl_c_generic_address_space, __opencl_c_atomic_order_seq_cst and
// __opencl_c_atomic_scope_device features.
void atomic_flag_clear(volatile atomic_flag *object)

// Requires OpenCL C 3.0 or newer and the __opencl_c_atomic_scope_device
// feature.
void atomic_flag_clear_explicit(
    volatile __global atomic_flag *object,
    memory_order order)
void atomic_flag_clear_explicit(
    volatile __local atomic_flag *object,
    memory_order order)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and both the
// __opencl_c_generic_address_space and __opencl_c_atomic_scope_device
// features.
void atomic_flag_clear_explicit(
    volatile atomic_flag *object,
    memory_order order)

// Requires OpenCL C 3.0 or newer.
void atomic_flag_clear_explicit(
    volatile __global atomic_flag *object,
    memory_order order,
    memory_scope scope)
void atomic_flag_clear_explicit(
    volatile __local atomic_flag *object,
    memory_order order,
    memory_scope scope)

// Requires OpenCL C 2.0, or OpenCL C 3.0 or newer and the
// __opencl_c_generic_address_space feature.
void atomic_flag_clear_explicit(
    volatile atomic_flag *object,
    memory_order order,
    memory_scope scope)
----------

The `order` argument shall not be `memory_order_acquire` nor
`memory_order_acq_rel`.
Atomically sets the value pointed to by object to false.
Memory is affected according to the value of order.

NOTE: The non-explicit `atomic_flag_clear` function <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and both the
`+__opencl_c_atomic_order_seq_cst+` and `+__opencl_c_atomic_scope_device+`
features.
For the explicit variants, memory order and scope enumerations must respect the
<<atomic-restrictions,restrictions section below>>.

NOTE: The function variants that use the generic address space, i.e. no
explicit address space is listed, <<unified-spec, require>> support for OpenCL
C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_generic_address_space+`
feature.
--

[[atomic-legacy]]
==== OpenCL C 1.x Legacy Atomics

IMPORTANT: The atomic functions described in this sub-section <<unified-spec,
require>> support for OpenCL C 1.1 or newer, and are <<unified-spec,
deprecated by>> OpenCL C 2.0.  Also see extensions
`cl_khr_global_int32_base_atomics`, `cl_khr_global_int32_extended_atomics`,
`cl_khr_local_int32_base_atomics`, and `cl_khr_local_int32_extended_atomics`.

OpenCL C 1.x had support for relaxed atomic operations via built-in functions
that could operate on any memory address in `+__global+` or `+__local+` spaces.
Unlike C11 style atomics these did not require using dedicated atomic types,
and instead operated on 32-bit signed integers, 32-bit unsigned integers, and
only in the case of **atomic_xchg** additionally single precision floating-point.
These were equivalent to atomic operations with `memory_order_relaxed`
consistency, and `memory_scope_work_group` scope.

NOTE: Some implementations may implement legacy atomics with a stricter memory
consistency order than `memory_order_relaxed` or a broader scope than
`memory_scope_work_group`.
This is because all the stricter orders and broader scopes fully satisfy the
semantics of the minimum requirements.

// Copied from table 6.19 in OpenCL 1.2 spec
[[table-legacy-atomic-functions]]
.Legacy Atomic Functions
[cols=",",]
|====
| *Function* | *Description*
| int **atomic_add**(volatile {global} int *_p_, int _val_) +
  int **atom_add**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_add**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_add**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  int **atomic_add**(volatile {local} int *_p_, int _val_) +
  int **atom_add**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_add**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_add**(volatile {local} unsigned int *_p_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ + _val_) and store result at location pointed by _p_.
      The function returns _old_.
| int **atomic_sub**(volatile {global} int *_p_, int _val_) +
  int **atom_sub**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_sub**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_sub**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  int **atomic_sub**(volatile {local} int *_p_, int _val_) +
  int **atom_sub**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_sub**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_sub**(volatile {local} unsigned int *_p_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ - _val_) and store result at location pointed by _p_.
      The function returns _old_.
| int **atomic_xchg**(volatile {global} int *_p_, int _val_) +
  int **atom_xchg**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_xchg**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_xchg**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  float **atomic_xchg**(volatile {global} float *_p_, float _val_) +

  int **atomic_xchg**(volatile {local} int *_p_, int _val_) +
  int **atom_xchg**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_xchg**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_xchg**(volatile {local} unsigned int *_p_, unsigned int _val_) +

  float **atomic_xchg**(volatile {local} float *_p_, float _val_) +
    | Swaps the _old_ value stored at location _p_ with new value given by
      _val_. Returns _old_ value.
| int **atomic_inc**(volatile {global} int *_p_) +
  int **atom_inc**(volatile {global} int *_p_) +

  unsigned int **atomic_inc**(volatile {global} unsigned int *_p_) +
  unsigned int **atom_inc**(volatile {global} unsigned int *_p_) +

  int **atomic_inc**(volatile {local} int *_p_) +
  int **atom_inc**(volatile {local} int *_p_) +

  unsigned int **atomic_inc**(volatile {local} unsigned int *_p_) +
  unsigned int **atom_inc**(volatile {local} unsigned int *_p_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ + 1) and store result at location pointed by _p_. The
     function returns _old_.
| int **atomic_dec**(volatile {global} int *_p_) +
  int **atom_dec**(volatile {global} int *_p_) +

  unsigned int **atomic_dec**(volatile {global} unsigned int *_p_) +
  unsigned int **atom_dec**({global} unsigned int *_p_) +

  int **atomic_dec**(volatile {local} int *_p_) +
  int **atom_dec**(volatile {local} int *_p_) +

  unsigned int **atomic_dec**(volatile {local} unsigned int *_p_) +
  unsigned int **atom_dec**(volatile {local} unsigned int *_p_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ - 1) and store result at location pointed by _p_. The
      function returns _old_.
| int **atomic_cmpxchg**(volatile {global} int *_p_, int _cmp_, int _val_) +
  int **atom_cmpxchg**(volatile {global} int *_p_, int _cmp_, int _val_) +

  unsigned int **atomic_cmpxchg**(volatile {global} unsigned int *_p_, unsigned int _cmp_, unsigned int _val_) +
  unsigned int **atom_cmpxchg**(volatile {global} unsigned int *_p_, unsigned int _cmp_, unsigned int _val_) +

  int **atomic_cmpxchg**(volatile {local} int *_p_, int _cmp_, int _val_) +
  int **atom_cmpxchg**(volatile {local} int *_p_, int _cmp_, int _val_) +

  unsigned int **atomic_cmpxchg**(volatile {local} unsigned int *_p_, unsigned int _cmp_, unsigned int _val_) +
  unsigned int **atom_cmpxchg**(volatile {local} unsigned int *_p_, unsigned int _cmp_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ == _cmp_) ? _val_ : _old_ and store result at location
      pointed by _p_. The function returns _old_.
| int **atomic_min**(volatile {global} int *_p_, int _val_) +
  int **atom_min**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_min**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_min**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  int **atomic_min**(volatile {local} int *_p_, int _val_) +
  int **atom_min**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_min**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_min**(volatile {local} unsigned int *_p_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute **min**(_old_, _val_) and store minimum value at location
      pointed by _p_. The function returns _old_.
| int **atomic_max**(volatile {global} int *_p_, int _val_) +
  int **atom_max**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_max**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_max**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  int **atomic_max**(volatile {local} int *_p_, int _val_) +
  int **atom_max**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_max**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_max**(volatile {local} unsigned int *_p_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute **max**(_old_, _val_) and store maximum value at location
      pointed by _p_. The function returns _old_.
| int **atomic_and**(volatile {global} int *_p_, int _val_) +
  int **atom_and**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_and**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_and**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  int **atomic_and**(volatile {local} int *_p_, int _val_) +
  int **atom_and**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_and**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_and**(volatile {local} unsigned int *_p_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ & _val_) and store result at location pointed by _p_.
      The function returns _old_.
| int **atomic_or**(volatile {global} int *_p_, int _val_) +
  int **atom_or**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_or**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_or**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  int **atomic_or**(volatile {local} int *_p_, int _val_) +
  int **atom_or**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_or**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_or**(volatile {local} unsigned int *_p_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ \| _val_) and store result at location pointed by
      _p_. The function returns _old_.
| int **atomic_xor**(volatile {global} int *_p_, int _val_) +
  int **atom_xor**(volatile {global} int *_p_, int _val_) +

  unsigned int **atomic_xor**(volatile {global} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_xor**(volatile {global} unsigned int *_p_, unsigned int _val_) +

  int **atomic_xor**(volatile {local} int *_p_, int _val_) +
  int **atom_xor**(volatile {local} int *_p_, int _val_) +

  unsigned int **atomic_xor**(volatile {local} unsigned int *_p_, unsigned int _val_) +
  unsigned int **atom_xor**(volatile {local} unsigned int *_p_, unsigned int _val_) +
    | Read the 32-bit value (referred to as _old_) stored at location pointed by
      _p_. Compute (_old_ ^ _val_) and store result at location pointed by _p_.
      The function returns _old_.
|====

[[atomic-restrictions]]
==== Restrictions

[open,refpage='atomicRestrictions',desc='Restrictions on Atomic Operations',type='freeform',spec='clang',anchor='atomic-restrictions',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
--
  * All operations on atomic types must be performed using the built-in
    atomic functions.
    C11 and {cpp11} support operators on atomic types.
    OpenCL C does not support operators with atomic types.
    Using atomic types with operators should result in a compilation error.
  * The `atomic_bool`, `atomic_char`, `atomic_uchar`, `atomic_short`,
    `atomic_ushort`, `atomic_intmax_t` and `atomic_uintmax_t` types are not
    supported by OpenCL C.
  * OpenCL C 2.0 requires that the built-in atomic functions on atomic types
    are lock-free.
    In OpenCL C 3.0 or newer, built-in atomic functions on atomic types may be
    lock-free.
  * The `+_Atomic+` type specifier and `+_Atomic+` type qualifier are not supported
    by OpenCL C.
  * The behavior of atomic operations where pointer arguments to the atomic
    functions refers to an atomic type in the `private` address space is
    undefined.
  * Using `memory_order_acquire` with any built-in atomic function except
    `atomic_work_item_fence` <<unified-spec, requires>> support for OpenCL C
    2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_atomic_order_acq_rel+`
    feature.
  * Using `memory_order_release` with any built-in atomic function except
    `atomic_work_item_fence` <<unified-spec, requires>> support for OpenCL C
    2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_atomic_order_acq_rel+`
    feature.
  * Using `memory_order_acq_rel` with any built-in atomic function except
    `atomic_work_item_fence` <<unified-spec, requires>> support for OpenCL C
    2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_atomic_order_acq_rel+`
    feature.
  * Using `memory_order_seq_cst` with any built-in atomic function
    <<unified-spec, requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
    newer and the `+__opencl_c_atomic_order_seq_cst+` feature.
  * Using `memory_scope_sub_group` with any built-in atomic function
    <<unified-spec, requires>> support for OpenCL C 3.0 or newer and the
    `+__opencl_c_subgroups+` feature.
  * Using `memory_scope_device` <<unified-spec, requires>> support for OpenCL
    C 2.0, or OpenCL C 3.0 or newer and the
    `+__opencl_c_atomic_scope_device+` feature.
  * Using `memory_scope_all_svm_devices` <<unified-spec, requires>>
    support for OpenCL C 2.0, or OpenCL C 3.0 or
    newer and the `+__opencl_c_atomic_scope_all_devices+` feature.
  * Using `memory_scope_all_devices` <<unified-spec, requires>> support for OpenCL
    C 3.0 or newer and the `+__opencl_c_atomic_scope_all_devices+` feature.
--


[[miscellaneous-vector-functions]]
=== Miscellaneous Vector Functions

[open,refpage='miscVectorFunctions',desc='Miscellaneous Vector Functions',type='freeform',spec='clang',anchor='miscellaneous-vector-functions',xrefs='atomicFunctions',alias='shuffle vec_step']
--

The OpenCL C programming language implements the following additional
built-in vector functions.
We use the generic type name `gentype__n__` (or `gentype__m__`) to indicate the
built-in data types `char{2|4|8|16}`, `uchar{2|4|8|16}`, `short{2|4|8|16}`,
`ushort{2|4|8|16}`, `half{2|4|8|16}` footnote:[{fn-half-supported}],
`int{2|4|8|16}`, `uint{2|4|8|16}`, `long{2|4|8|16}`
footnote:[{fn-int64-supported}], `ulong{2|4|8|16}`, `float{2|4|8|16}`, or
`double{2|4|8|16}` footnote:[{fn-double-supported}] as the type for
the arguments unless otherwise stated.
We use the generic name `ugentype__n__` to indicate the built-in unsigned
integer data types.

[[table-misc-vector]]
.Built-in Miscellaneous Vector Functions
[cols="1,2",]
|====
| *Function* | *Description*
| int *vec_step*(gentype__n__ _a_) +
  int *vec_step*(char3 _a_) +
  int *vec_step*(uchar3 _a_) +
  int *vec_step*(short3 _a_) +
  int *vec_step*(ushort3 _a_) +
  int *vec_step*(half3 _a_) +
  int *vec_step*(int3 _a_) +
  int *vec_step*(uint3 _a_) +
  int *vec_step*(long3 _a_) +
  int *vec_step*(ulong3 _a_) +
  int *vec_step*(float3 _a_) +
  int *vec_step*(double3 _a_) +
  int *vec_step*(_type_)
    | The *vec_step* built-in function takes a built-in scalar or vector
      data type argument and returns an integer value representing the
      number of elements in the scalar or vector.

      For all scalar types, *vec_step* returns 1.

      The *vec_step* built-in functions that take a 3-component vector
      return 4.

      *vec_step* may also take a pure type as an argument, e.g.
      *vec_step*(float2)

      <<unified-spec, Requires>> support for OpenCL C 1.1 or newer.
| gentype__n__ *shuffle*(gentype__m__ _x_,
                          ugentype__n__ _mask_) +
  gentype__n__ *shuffle2*(gentype__m__ _x_,
                           gentype__m__ _y_,
                           ugentype__n__ _mask_)
   a| The *shuffle* and *shuffle2* built-in functions construct a
      permutation of elements from one or two input vectors respectively
      that are of the same type, returning a vector with the same element
      type as the input and length that is the same as the shuffle mask.
      The size of each element in the _mask_ must match the size of each
      element in the result.
      For *shuffle*, only the *ilogb*(2__m__-1) least significant bits of each
      _mask_ element are considered.
      For *shuffle2*, only the *ilogb*(2__m__-1)+1 least significant bits of
      each _mask_ element are considered.
      Other bits in the mask shall be ignored.

The elements of the input vectors are numbered from left to right across one
or both of the vectors.
For this purpose, the number of elements in a vector is given by
*vec_step*(gentype__m__).
The shuffle _mask_ operand specifies, for each element of the result vector,
which element of the one or two input vectors the result element gets.

<<unified-spec, Requires>> support for OpenCL C 1.1 or newer.

Examples:

[source,c]
----------
uint4 mask = (uint4)(3, 2, 1, 0);
float4 a;
float4 r = shuffle(a, mask);
// r.s0123 = a.wzyx

uint8 mask = (uint8)(0, 1, 2, 3, 4, 5, 6, 7);
float4 a, b;
float8 r = shuffle2(a, b, mask);
// r.s0123 = a.xyzw
// r.s4567 = b.xyzw

uint4 mask;
float8 a;
float4 b;

b = shuffle(a, mask);
----------

Examples that are not valid are:

[source,c]
----------
uint8 mask;
short16 a;
short8 b;

b = shuffle(a, mask); //  not valid
----------
|====
--


[[printf]]
=== printf

[open,refpage='printfFunction',desc='printf Function',type='freeform',spec='clang',anchor='printf']
--
IMPORTANT: *printf* <<unified-spec, requires>> support for OpenCL C 1.2.

The OpenCL C programming language implements the *printf* function.

[[table-printf]]
.Built-in printf Function
[cols=",",]
|====
| *Function* | *Description*
| int **printf**(constant char restrict _format_, ...)
    | The *printf* built-in function writes output to an
      implementation-defined stream such as stdout under control of the
      string pointed to by _format_ that specifies how subsequent arguments
      are converted for output.
      If there are insufficient arguments for the format, the behavior is
      undefined.
      If the format is exhausted while arguments remain, the excess
      arguments are evaluated (as always) but are otherwise ignored.
      The *printf* function returns when the end of the format string is
      encountered.

      *printf* returns 0 if it was executed successfully and -1 otherwise.
|====
--


[[printf-output-synchronization]]
==== printf output synchronization

When the event that is associated with a particular kernel invocation is
completed, the output of all printf() calls executed by this kernel
invocation is flushed to the implementation-defined output stream.
Calling *clFinish* on a command queue flushes all pending output by printf
in previously enqueued and completed commands to the implementation-defined
output stream.
In the case that printf is executed from multiple work-items concurrently,
there is no guarantee of ordering with respect to written data.
For example, it is valid for the output of a work-item with a global id
(0,0,1) to appear intermixed with the output of a work-item with a global id
(0,0,4) and so on.


[[printf-format-string]]
==== printf format string

The format shall be a character sequence, beginning and ending in its
initial shift state.
The format is composed of zero or more directives: ordinary characters (not
*%*), which are copied unchanged to the output stream; and conversion
specifications, each of which results in fetching zero or more subsequent
arguments, converting them, if applicable, according to the corresponding
conversion specifier, and then writing the result to the output stream.
The format is in the constant address space and must be resolvable at
compile time, i.e. cannot be dynamically created by the executing program
itself.

Each conversion specification is introduced by the character *%*.
After the *%*, the following appear in sequence:

  * Zero or more _flags_ (in any order) that modify the meaning of the
    conversion specification.
  * An optional minimum _field width_.
    If the converted value has fewer characters than the field width, it is
    padded with spaces (by default) on the left (or right, if the left
    adjustment flag, described later, has been given) to the field width.
    The field width takes the form of a nonnegative decimal integer
    footnote:[{fn-printf-field-width}].
  * An optional __precision__ that gives the minimum number of digits to
    appear for the *d*, *i*, *o*, *u*, *x*, and *X* conversions, the number
    of digits to appear after the decimal-point character for *a*, *A*, *e*,
    *E*, *f*, and *F* conversions, the maximum number of significant digits
    for the *g* and *G* conversions, or the maximum number of bytes to be
    written for *s* conversions.
    The precision takes the form of a period (*.*) followed by an optional
    decimal integer; if only the period is specified, the precision is taken
    as zero.
    If a precision appears with any other conversion specifier, the behavior
    is undefined.
  * An optional _vector specifier_.
  * A __length modifier__ that specifies the size of the argument.
    The _length modifier_ is required with a vector specifier and together
    specifies the vector type.
    <<implicit-conversions,Implicit conversions>> between vector types are
    disallowed.
    If the _vector specifier_ is not specified, the _length modifier_ is
    optional.
  * A __conversion specifier__ character that specifies the type of
    conversion to be applied.

The flag characters and their meanings are:

*-* The result of the conversion is left-justified within the field.
(It is right-justified if this flag is not specified.)

*+* The result of a signed conversion always begins with a plus or minus
sign.
(It begins with a sign only when a negative value is converted if this flag
is not specified.) footnote:[{fn-printf-minus-sign}]

_space_ If the first character of a signed conversion is not a sign, or if a
signed conversion results in no characters, a space is prefixed to the
result.
If the __space__ and *+* flags both appear, the _space_ flag is ignored.

*#* The result is converted to an "`alternative form`".
For *o* conversion, it increases the precision, if and only if necessary,
to force the first digit of the result to be a zero (if the value and
precision are both 0, a single 0 is printed).
For *x* (or *X*) conversion, a nonzero result has *0x* (or *0X*)
prefixed to it.
For *a*, *A*, *e*, *E*, *f*, *F*, *g*, and *G* conversions,
the result of converting a floating-point number always contains a
decimal-point character, even if no digits follow it.
(Normally, a decimal-point character appears in the result of these
conversions only if a digit follows it.) For *g* and *G* conversions,
trailing zeros are *not* removed from the result.
For other conversions, the behavior is undefined.

*0* For *d*, *i*, *o*, *u*, *x*, *X*, *a*, *A*, *e*,
*E*, *f*, *F*, *g*, and *G* conversions, leading zeros (following
any indication of sign or base) are used to pad to the field width rather
than performing space padding, except when converting an infinity or NaN.
If the *0* and *-* flags both appear, the *0* flag is ignored.
For *d*, *i*, *o*, *u*, *x*, and *X* conversions, if a precision
is specified, the *0* flag is ignored.
For other conversions, the behavior is undefined.

The vector specifier and its meaning is:

**v**__n__ Specifies that a following *a*, *A*, *e*, *E*, *f*, *F*, *g*, *G*,
*d*, *i*, *o*, *u*, *x*, or *X* conversion specifier applies to a vector
argument, where __n__ is the size of the vector and must be 2, 3, 4, 8 or 16.

The vector value is displayed in the following general form:

[none]
* value1 C value2 C ... C value__n__

where C is a separator character.
The value for this separator character is a comma.

If the vector specifier is not used, the length modifiers and their meanings
are:

*hh* Specifies that a following *d*, *i*, *o*, *u*, *x*, or *X* conversion
specifier applies to a `char` or `uchar` argument (the argument will have
been promoted according to the integer promotions, but its value shall be
converted to `char` or `uchar` before printing).

*h* Specifies that a following *d*, *i*, *o*, *u*, *x*, or *X* conversion
specifier applies to a `short` or `ushort` argument (the argument will have
been promoted according to the integer promotions, but its value shall be
converted to `short` or `unsigned short` before printing).

*l* (ell) Specifies that a following *d*, *i*, *o*, *u*, *x*, or *X*
conversion specifier applies to a `long` or `ulong` argument.
The *l* modifier is supported by the full profile.
For the embedded profile, the *l* modifier is supported only if 64-bit
integers are supported by the device.

If the vector specifier is used, the length modifiers and their meanings
are:

*hh* Specifies that a following *d*, *i*, *o*, *u*, *x*, or *X* conversion
specifier applies to a `char__n__` or `uchar__n__` argument (the argument
will not be promoted).

*h* Specifies that a following *d*, *i*, *o*, *u*, *x*, or *X* conversion
specifier applies to a `short__n__` or `ushort__n__` argument (the argument
will not be promoted); that a following *a*, *A*, *e*, *E*, *f*, *F*, *g*,
or *G* conversion specifier applies to a `half__n__`
footnote:[{fn-half-supported}] argument.

*hl* This modifier can only be used with the vector specifier.
Specifies that a following *d*, *i*, *o*, *u*, *x*, or *X* conversion
specifier applies to a `int__n__` or `uint__n__` argument; that a following
*a*, *A*, *e*, *E*, *f*, *F*, *g*, or *G* conversion specifier applies to a
`float__n__` argument.

**l**(ell) Specifies that a following *d*, *i*, *o*, *u*, *x*, or *X*
conversion specifier applies to a `long__n__` or `ulong__n__` argument; that
a following *a*, *A*, *e*, *E*, *f*, *F*, *g*, or *G* conversion specifier
applies to a `double__n__` argument.
The *l* modifier is supported by the full profile.
For the embedded profile, the *l* modifier is supported only if 64-bit
integers or double-precision floating-point are supported by the device.

If a vector specifier appears without a length modifier, the behavior is
undefined.
The vector data type described by the vector specifier and length modifier
must match the data type of the argument; otherwise the behavior is
undefined.

If a length modifier appears with any conversion specifier other than as
specified above, the behavior is undefined.

The conversion specifiers and their meanings are:

**d,i** The `int`, `char__n__`, `short__n__`, `int__n__` or `long__n__`
argument is converted to signed decimal in the style __[__**-**_]dddd_.
The precision specifies the minimum number of digits to appear; if the value
being converted can be represented in fewer digits, it is expanded with
leading zeros.
The default precision is 1.
The result of converting a zero value with a precision of zero is no
characters.

*o,u,*

*x,X* The `unsigned int`, `uchar__n__`, `ushort__n__`, `uint__n__` or
`ulong__n__` argument is converted to unsigned octal (*o*), unsigned decimal
(*u*), or unsigned hexadecimal notation (*x* or *X*) in the style _dddd_;
the letters *abcdef* are used for *x* conversion and the letters *ABCDEF*
for *X* conversion.
The precision specifies the minimum number of digits to appear; if the value
being converted can be represented in fewer digits, it is expanded with
leading zeros.
The default precision is 1.
The result of converting a zero value with a precision of zero is no
characters.

**f,F** A `double`, `half__n__`, `float__n__` or `double__n__` argument
representing a floating-point number is converted to decimal notation in the
style __[__**-**__]ddd__**.**_ddd_, where the number of digits after the
decimal-point character is equal to the precision specification.
If the precision is missing, it is taken as 6; if the precision is zero and
the **# **flag is not specified, no decimal-point character appears.
If a decimal-point character appears, at least one digit appears before it.
The value is rounded to the appropriate number of digits.
A `double`, `half__n__`, `float__n__` or `double__n__` argument representing
an infinity is converted in one of the styles __[__**-**__]__**inf **or
__[__**-**__]__**infinity ** -- which style is implementation-defined.
A `double`, `half__n__`, `float__n__` or `double__n__` argument representing
a NaN is converted in one of the styles __[__**-**__]__**nan **or
__[__**-**__]__**nan(**__n-char-sequence__**) **
-- which style, and the meaning of any _n-char-sequence_, is
implementation-defined.
The *F* conversion specifier produces `INF`, `INFINITY`, or `NAN` instead of
*inf*, *infinity*, or *nan*, respectively footnote:[{fn-printf-infinity-nan}].

**e,E** A `double`, `half__n__`, `float__n__` or `double__n__` argument
representing a floating-point number is converted in the style
__[__**-**__]d__**.**__ddd __**e{plusmn}}**_dd_, where there is one digit
(which is nonzero if the argument is nonzero) before the decimal-point
character and the number of digits after it is equal to the precision; if
the precision is missing, it is taken as 6; if the precision is zero and the
*#* flag is not specified, no decimal-point character appears.
The value is rounded to the appropriate number of digits.
The *E* conversion specifier produces a number with *E* instead of *e*
introducing the exponent.
The exponent always contains at least two digits, and only as many more
digits as necessary to represent the exponent.
If the value is zero, the exponent is zero.
A `double`, `half__n__`, `float__n__` or `double__n__` argument representing
an infinity or NaN is converted in the style of an *f* or *F* conversion
specifier.

**g,G** A `double`, `half__n__`, `float__n__` or `double__n__` argument
representing a floating-point number is converted in style *f* or *e* (or in
style *F* or *E* in the case of a *G* conversion specifier), depending on
the value converted and the precision.
Let __P __equal the precision if nonzero, 6 if the precision is omitted, or
1 if the precision is zero.
Then, if a conversion with style *E* would have an exponent of _X_: -- if
_P_ > _X_ {geq} -4, the conversion is with style *f* (or *F*) and precision
_P_ *-* (_X_ *+* 1).
-- otherwise, the conversion is with style *e *(or *E*) and precision _P_
*-* 1.
Finally, unless the *#* flag is used, any trailing zeros are removed from
the fractional portion of the result and the decimal-point character is
removed if there is no fractional portion remaining.
A `double`, `half__n__`, `float__n__` or `double__n__` *e* argument
representing an infinity or NaN is converted in the style of an *f* or *F*
conversion specifier.

**a,A** A `double`, `half__n__`, `float__n__` or `double__n__` argument
representing a floating-point number is converted in the style
__[__**-**__]__**0x**__h__**.**__hhhh __**p{plusmn}**_d_, where there is one
hexadecimal digit (which is nonzero if the argument is a normalized
floating-point number and is otherwise unspecified) before the decimal-point
character footnote:[{fn-printf-hex-float}] and the number of hexadecimal digits
after it is equal to the precision; if the precision is missing, then the
precision is sufficient for an exact representation of the value; if the
precision is zero and the *#* flag is not specified, no decimal point character
appears.
The letters *abcdef* are used for *a* conversion and the letters *ABCDEF*
for *A* conversion.
The *A* conversion specifier produces a number with *X* and *P* instead of
*x* and *p*.
The exponent always contains at least one digit, and only as many more
digits as necessary to represent the decimal exponent of 2.
If the value is zero, the exponent is zero.
A `double`, `half__n__`, `float__n__` or `double__n__` argument representing
an infinity or NaN is converted in the style of an *f* or *F* conversion
specifier.

[NOTE]
====
The conversion specifiers *e,E,g,G,a,A* convert a `float` or `half` argument
that is a scalar type to a `double` only if the `double` data type is
supported, e.g. for OpenCL C 3.0 or newer the `+__opencl_c_fp64+` feature
macro is present.
If the `double` data type is not supported, the argument will be a `float`
instead of a `double` and the `half` type will be converted to a `float`.
====

*c* The `int` argument is converted to an `unsigned char`, and the resulting
character is written.

*s* The argument shall be a literal string
footnote:[{fn-printf-literal-string}].
Characters from the literal string array are written up to (but not
including) the terminating null character.
If the precision is specified, no more than that many bytes are written.
If the precision is not specified or is greater than the size of the array,
the array shall contain a null character.

*p* The argument shall be a pointer to *void*.
The pointer can refer to a memory region in the `global`, `constant`,
`local`, `private`, or generic address space.
The value of the pointer is converted to a sequence of printing characters
in an implementation-defined manner.

*%* A *%* character is written.
No argument is converted.
The complete conversion specification shall be *%%*.

If a conversion specification is invalid, the behavior is undefined.
If any argument is not the correct type for the corresponding conversion
specification, the behavior is undefined.

In no case does a nonexistent or small field width cause truncation of a
field; if the result of a conversion is wider than the field width, the
field is expanded to contain the conversion result.

For *a* and *A* conversions, the value is correctly rounded to a hexadecimal
floating number with the given precision.

A few examples of printf are given below:

[source,c]
----------
float4  f = (float4)(1.0f, 2.0f, 3.0f, 4.0f);
uchar4 uc = (uchar4)(0xFA, 0xFB, 0xFC, 0xFD);

printf("f4 = %2.2v4hlf\n", f);
printf("uc = %#v4hhx\n", uc);
----------

The above two printf calls print the following:

[source,c]
----------
f4 = 1.00,2.00,3.00,4.00
uc = 0xfa,0xfb,0xfc,0xfd
----------

A few examples of valid use cases of printf for the conversion specifier *s*
are given below.
The argument value must be a pointer to a literal string.

[source,c]
----------
kernel void my_kernel( ... )
{
    printf("%s\n", "this is a test string\n");
}
----------

A few examples of invalid use cases of printf for the conversion specifier
*s* are given below:

[source,c]
----------
kernel void my_kernel(global char *s, ... )
{
    printf("%s\n", s);
    constant char *p = "`this is a test string\n`";
    printf("%s\n", p);
    printf("%s\n", &p[3]);
}
----------

A few examples of invalid use cases of printf where data types given by the
vector specifier and length modifier do not match the argument type are
given below:

[source,c]
----------
kernel void my_kernel(global char *s, ... )
{
    uint2 ui = (uint2)(0x12345678, 0x87654321);

    printf("unsigned short value = (%#v2hx)\n", ui)
    printf("unsigned char value = (%#v2hhx)\n", ui)
}
----------


[[differences-between-opencl-c-and-c99-printf]]
==== Differences between OpenCL C and C99 printf

  * The *l* modifier followed by a *c* conversion specifier or *s*
    conversion specifier is not supported by OpenCL C.
  * The *ll*, *j*, *z*, *t*, and *L* length modifiers are not supported by
    OpenCL C but are reserved.
  * The *n* conversion specifier is not supported by OpenCL C but is
    reserved.
  * OpenCL C adds the optional *v*__n__ vector specifier to support printing
    of vector types.
  * The conversion specifiers *f*, *F*, *e*, *E*, *g*, *G*, *a*, *A* convert
    a `float` argument to a `double` only if the `double` data type is
    supported.
    Refer to the value of the <<opencl-device-queries,
    `CL_DEVICE_DOUBLE_FP_CONFIG` device query>>.
    If the `double` data type is not supported, the argument will be a
    `float` instead of a `double`.
  * For the embedded profile, the *l* length modifier is supported only if
    64-bit integers are supported.
  * In OpenCL C, *printf* returns 0 if it was executed successfully and -1
    otherwise vs.
    C99 where *printf* returns the number of characters printed or a
    negative value if an output or encoding error occurred.
  * In OpenCL C, the conversion specifier *s* can only be used for arguments
    that are literal strings.


[[image-read-and-write-functions]]
=== Image Read and Write Functions

The built-in functions defined in this section can only be used with image
memory objects.
An image memory object can be accessed by specific function calls that read
from and/or write to specific locations in the image.

Support for the image built-in functions is optional.
If a device supports images then the value of the <<opencl-device-queries,
`CL_DEVICE_IMAGE_SUPPORT` device query>>) is `CL_TRUE` and the OpenCL C
compiler for that device must define the `+__IMAGE_SUPPORT__+` macro.
A compiler for OpenCL C 3.0 or newer for that device must also support the
`+__opencl_c_images+` feature.

Image memory objects that are being read by a kernel should be declared with
the `read_only` qualifier.
*write_image* calls to image memory objects declared with the read_only
qualifier will generate a compilation error.
Image memory objects that are being written to by a kernel should be
declared with the write_only qualifier.
*read_image* calls to image memory objects declared with the `write_only`
qualifier will generate a compilation error.
*read_image* and *write_image* calls to the same image memory object in a
kernel are supported.
Image memory objects that are being read and written by a kernel should be
declared with the `read_write` qualifier.

The *read_image* calls returns a four component floating-point, integer or
unsigned integer color value.
The color values returned by *read_image* are identified as _x_, _y_, _z_,
_w_ where _x_ refers to the red component, _y_ refers to the green
component, _z_ refers to the blue component and _w_ refers to the alpha
component.


[[samplers]]
==== Samplers

[open,refpage='samplers',desc='Image Samplers',type='freeform',spec='clang',anchor='samplers',alias='sampler_t']
--

The image read functions take a sampler argument.
The sampler can be passed as an argument to the kernel using
*clSetKernelArg*, or can be declared in the outermost scope of kernel
functions, or it can be a constant variable of type `sampler_t` declared in
the program source.

Sampler variables in a program are declared to be of type `sampler_t`.
A variable of `sampler_t` type declared in the program source must be
initialized with a 32-bit unsigned integer constant, which is interpreted as
a bit-field specifying the following properties:

  * Addressing Mode
  * Filter Mode
  * Normalized Coordinates

These properties control how elements of an image object are read by
*read_image{f|i|ui}*.

Samplers can also be declared as global constants in the program source
using the following syntax.

[source,c]
----------
const sampler_t <sampler name> = <value>
----------

or

[source,c]
----------
constant sampler_t <sampler name> = <value>
----------

or

[source,c]
----------
__constant sampler_t <sampler_name> = <value>
----------

Note that samplers declared using the `constant` qualifier are not counted
towards the maximum number of arguments pointing to the constant address
space or the maximum size of the `constant` address space allowed per device
(i.e. the value of the <<opencl-device-queries,
`CL_DEVICE_MAX_CONSTANT_ARGS`>> and <<opencl-device-queries,
`CL_DEVICE_MAX_CONSTANT_BUFFER_SIZE`>> device queries).

The sampler fields are described in the following table.

[[table-sampler-descriptor]]
.Sampler Descriptor
[cols=",",]
|====
| *Sampler State* | *Description*
| `<normalized coords>`
    | Specifies whether the _x_, _y_ and _z_ coordinates are passed in as
      normalized or unnormalized values.
      This must be a literal value and can be one of the following
      predefined enums:

      `CLK_NORMALIZED_COORDS_TRUE` or `CLK_NORMALIZED_COORDS_FALSE`.

      The samplers used with an image in multiple calls to
      *read_image{f\|i\|ui}* declared in a kernel must use the same value
      for <normalized coords>.
| `<addressing mode>`
    | Specifies the image addressing mode, i.e. how out-of-range image
      coordinates are handled.
      This must be a literal value and can be one of the following
      predefined enums:

      `CLK_ADDRESS_MIRRORED_REPEAT` - Flip the image coordinate at every
      integer junction.
      This addressing mode can only be used with normalized coordinates.
      If normalized coordinates are not used, this addressing mode may
      generate image coordinates that are undefined.

      `CLK_ADDRESS_REPEAT` - out-of-range image coordinates are wrapped to
      the valid range.
      This addressing mode can only be used with normalized coordinates.
      If normalized coordinates are not used, this addressing mode may
      generate image coordinates that are undefined.

      `CLK_ADDRESS_CLAMP_TO_EDGE` - out-of-range image coordinates are
      clamped to the extent.

      `CLK_ADDRESS_CLAMP` - out-of-range image coordinates will return a
      border color footnote:[{fn-CLK_ADDRESS_CLAMP}].

      `CLK_ADDRESS_NONE` - for this addressing mode the programmer
      guarantees that the image coordinates used to sample elements of the
      image refer to a location inside the image; otherwise the results are
      undefined.

      For 1D and 2D image arrays, the addressing mode applies only to the
      _x_ and (_x, y_) coordinates.
      The addressing mode for the coordinate which specifies the array index
      is always `CLK_ADDRESS_CLAMP_TO_EDGE`.

| `<filter mode>`
    | Specifies the filter mode to use.
      This must be a literal value and can be one of the following
      predefined enums: `CLK_FILTER_NEAREST` or `CLK_FILTER_LINEAR`.

      Refer to the <<addressing-and-filter-modes,detailed description of
      these filter modes>>.
|====

*Examples*:

[source,c]
----------
const sampler_t samplerA = CLK_NORMALIZED_COORDS_TRUE |
                           CLK_ADDRESS_REPEAT |
                           CLK_FILTER_NEAREST;
----------

`samplerA` specifies a sampler that uses normalized coordinates, the repeat
addressing mode and a nearest filter.

The maximum number of samplers that can be declared in a kernel can be
queried using the `CL_DEVICE_MAX_SAMPLERS` token in *clGetDeviceInfo*.
--


[[determining-the-border-color-or-value]]
===== *Determining the border color or value*

If `<addressing mode>` in sampler is `CLK_ADDRESS_CLAMP`, then out-of-range
image coordinates return the border color.
The border color selected depends on the image channel order and can be one
of the following values:

    * If the image channel order is `CL_A`, `CL_INTENSITY`, `CL_Rx`,
      `CL_RA`, `CL_RGx`, `CL_RGBx`, `CL_sRGBx`, `CL_ARGB`, `CL_BGRA`,
      `CL_ABGR`, `CL_RGBA`, `CL_sRGBA` or `CL_sBGRA`, the border color is
      `(0.0f, 0.0f, 0.0f, 0.0f)`.
    * If the image channel order is `CL_R`, `CL_RG`, `CL_RGB`, or
      `CL_LUMINANCE`, the border color is `(0.0f, 0.0f, 0.0f, 1.0f)`.
    * If the image channel order is `CL_DEPTH`, the border value is `0.0f`.


[[srgb-images]]
===== *sRGB Images*

The built-in image read functions will perform sRGB to linear RGB
conversions if the image is an sRGB image.
Likewise, the built-in image write functions perform the linear to
sRGB conversion if the image is an sRGB image.

Only the R, G and B components are converted from linear to sRGB and
vice-versa.
The alpha component is returned as is.


[[built-in-image-read-functions]]
==== Built-in Image Read Functions

[open,refpage='imageReadFunctions',desc='Built-in Image Read Functions',type='freeform',spec='clang',anchor='built-in-image-read-functions',xrefs='imageQueryFunctions imageSamplerlessReadFunctions imageWriteFunctions',alias='read_imagef read_imagei read_imageui']
--

The following built-in function calls to read images with a sampler are
supported footnote:[{fn-read-image-with-sampler}].

[[table-image-read]]
.Built-in Image Read Functions
[cols=",",]
|====
| *Function* | *Description*
| float4 *read_imagef*(read_only image2d_t _image_, sampler_t _sampler_,
  int2 _coord_) +
  float4 *read_imagef*(read_only image2d_t _image_, sampler_t _sampler_,
  float2 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_) to do an element lookup in
      the 2D image object specified by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      The *read_imagef* calls that take integer coordinates must use a
      sampler with filter mode set to `CLK_FILTER_NEAREST`, normalized
      coordinates set to `CLK_NORMALIZED_COORDS_FALSE` and addressing mode
      set to `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.
| |
| int4 *read_imagei*(read_only image2d_t _image_, sampler_t _sampler_,
  int2 _coord_) +
  int4 *read_imagei*(read_only image2d_t _image_, sampler_t _sampler_,
  float2 _coord_) +
  uint4 *read_imageui*(read_only image2d_t _image_, sampler_t _sampler_,
  int2 _coord_) +
  uint4 *read_imageui*(read_only image2d_t _image_, sampler_t _sampler_,
  float2 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_) to do an element lookup in
      the 2D image object specified by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively.
      Each channel will be stored in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.

      The *read_image{i\|ui}* calls support a nearest filter only.
      The filter_mode specified in _sampler_ must be set to
      `CLK_FILTER_NEAREST`; otherwise the values returned are undefined.

      Furthermore, the *read_image{i\|ui}* calls that take integer
      coordinates must use a sampler with normalized coordinates set to
      `CLK_NORMALIZED_COORDS_FALSE` and addressing mode set to
      `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.
| |
| float4 *read_imagef*(read_only image3d_t _image_, sampler_t _sampler_,
  int4 _coord_ ) +
  float4 *read_imagef*(read_only image3d_t _image_, sampler_t _sampler_,
  float4 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_, _coord.z_) to do an element
      lookup in the 3D image object specified by _image_.
      _coord.w_ is ignored.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      The *read_imagef* calls that take integer coordinates must use a
      sampler with filter mode set to `CLK_FILTER_NEAREST`, normalized
      coordinates set to `CLK_NORMALIZED_COORDS_FALSE` and addressing mode
      set to `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description are
      undefined.
| |
| int4 *read_imagei*(read_only image3d_t _image_, sampler_t _sampler_,
  int4 _coord_) +
  int4 *read_imagei*(read_only image3d_t _image_, sampler_t _sampler_,
  float4 _coord_) +
  uint4 *read_imageui*(read_only image3d_t _image_, sampler_t _sampler_,
  int4 _coord_) +
  uint4 *read_imageui*(read_only image3d_t _image_, sampler_t _sampler_,
  float4 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_, _coord.z_) to do an element
      lookup in the 3D image object specified by _image_.
      _coord.w_ is ignored.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively.
      Each channel will be stored in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.

      The *read_image{i\|ui}* calls support a nearest filter only.
      The filter_mode specified in _sampler_ must be set to
      `CLK_FILTER_NEAREST`; otherwise the values returned are undefined.

      Furthermore, the *read_image{i\|ui}* calls that take integer
      coordinates must use a sampler with normalized coordinates set to
      `CLK_NORMALIZED_COORDS_FALSE` and addressing mode set to
      `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.
| |
| float4 *read_imagef*(read_only image2d_array_t _image_,
  sampler_t _sampler_, int4 _coord_) +
  float4 *read_imagef*(read_only image2d_array_t _image_,
  sampler_t _sampler_, float4 _coord_)
    | Use _coord.xy_ to do an element lookup in the 2D image identified by
      _coord.z_ in the 2D image array specified by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with image_channel_data_type set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with image_channel_data_type set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with image_channel_data_type set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      The *read_imagef* calls that take integer coordinates must use a
      sampler with filter mode set to `CLK_FILTER_NEAREST`, normalized
      coordinates set to `CLK_NORMALIZED_COORDS_FALSE` and addressing mode
      set to `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      Values returned by *read_imagef* for image objects with
      image_channel_data_type values not specified in the description above
      are undefined.
| int4 *read_imagei*(read_only image2d_array_t _image_, sampler_t _sampler_,
  int4 _coord_) +
  int4 *read_imagei*(read_only image2d_array_t _image_, sampler_t _sampler_,
  float4 _coord_) +
  uint4 *read_imageui*(read_only image2d_array_t _image_,
  sampler_t _sampler_, int4 _coord_) +
  uint4 *read_imageui*(read_only image2d_array_t _image_,
  sampler_t _sampler_, float4 _coord_)
    | Use _coord.xy_ to do an element lookup in the 2D image identified by
      _coord.z_ in the 2D image array specified by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively.
      Each channel will be stored in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.

      The *read_image{i\|ui}* calls support a nearest filter only.
      The filter_mode specified in _sampler_ must be set to
      `CLK_FILTER_NEAREST`; otherwise the values returned are undefined.

      Furthermore, the *read_image{i\|ui}* calls that take integer
      coordinates must use a sampler with normalized coordinates set to
      `CLK_NORMALIZED_COORDS_FALSE` and addressing mode set to
      `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.
| |
| float4 *read_imagef*(read_only image1d_t _image_, sampler_t _sampler_,
  int _coord_) +
  float4 *read_imagef*(read_only image1d_t _image_, sampler_t _sampler_,
  float _coord_)
    | Use _coord_ to do an element lookup in the 1D image object specified
      by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      The *read_imagef* calls that take integer coordinates must use a
      sampler with filter mode set to `CLK_FILTER_NEAREST`, normalized
      coordinates set to `CLK_NORMALIZED_COORDS_FALSE` and addressing mode
      set to `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| |
| int4 *read_imagei*(read_only image1d_t _image_, sampler_t _sampler_,
  int _coord_) +
  int4 *read_imagei*(read_only image1d_t _image_, sampler_t _sampler_,
  float _coord_) +
  uint4 *read_imageui*(read_only image1d_t _image_, sampler_t _sampler_,
  int _coord_) +
  uint4 *read_imageui*(read_only image1d_t _image_, sampler_t _sampler_,
  float _coord_)
    | Use _coord_ to do an element lookup in the 1D image object specified
      by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively.
      Each channel will be stored in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.

      The *read_image{i\|ui}* calls support a nearest filter only.
      The filter_mode specified in _sampler_ must be set to
      `CLK_FILTER_NEAREST`; otherwise the values returned are undefined.

      Furthermore, the *read_image{i\|ui}* calls that take integer
      coordinates must use a sampler with normalized coordinates set to
      `CLK_NORMALIZED_COORDS_FALSE` and addressing mode set to
      `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| |
| float4 *read_imagef*(read_only image1d_array_t _image_,
  sampler_t _sampler_, int2 _coord_) +
  float4 *read_imagef*(read_only image1d_array_t _image_,
  sampler_t _sampler_, float2 _coord_)
    | Use _coord.x_ to do an element lookup in the 1D image identified by
      _coord.y_ in the 1D image array specified by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with image_channel_data_type set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with image_channel_data_type set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with image_channel_data_type set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      The *read_imagef* calls that take integer coordinates must use a
      sampler with filter mode set to `CLK_FILTER_NEAREST`, normalized
      coordinates set to `CLK_NORMALIZED_COORDS_FALSE` and addressing mode
      set to `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      Values returned by *read_imagef* for image objects with
      image_channel_data_type values not specified in the description above
      are undefined.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| int4 *read_imagei*(read_only image1d_array_t _image_, sampler_t _sampler_,
  int2 _coord_) +
  int4 *read_imagei*(read_only image1d_array_t _image_, sampler_t _sampler_,
  float2 _coord_) +
  uint4 *read_imageui*(read_only image1d_array_t _image_,
  sampler_t _sampler_, int2 _coord_) +
  uint4 *read_imageui*(read_only image1d_array_t _image_,
  sampler_t _sampler_, float2 _coord_)
    | Use _coord.x_ to do an element lookup in the 1D image identified by
      _coord.y_ in the 1D image array specified by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively. Each channel will be stored
      in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.

      The *read_image{i\|ui}* calls support a nearest filter only.
      The filter_mode specified in _sampler_ must be set to
      `CLK_FILTER_NEAREST`; otherwise the values returned are undefined.

      Furthermore, the *read_image{i\|ui}* calls that take integer
      coordinates must use a sampler with normalized coordinates set to
      `CLK_NORMALIZED_COORDS_FALSE` and addressing mode set to
      `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| |
| float *read_imagef*(read_only image2d_depth_t _image_,
  sampler_t _sampler_, int2 _coord_) +
  float *read_imagef*(read_only image2d_depth_t _image_,
  sampler_t _sampler_, float2 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_) to do an element lookup in
      the 2D depth image object specified by _image_.

      *read_imagef* returns a floating-point value in the range [0.0, 1.0]
      for depth image objects created with _image_channel_data_type_ set to
      `CL_UNORM_INT16` or `CL_UNORM_INT24`.

      *read_imagef* returns a floating-point value for depth image objects
      created with _image_channel_data_type_ set to `CL_FLOAT`.

      The *read_imagef* calls that take integer coordinates must use a
      sampler with filter mode set to `CLK_FILTER_NEAREST`, normalized
      coordinates set to `CLK_NORMALIZED_COORDS_FALSE` and addressing mode
      set to `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      Values returned by *read_imagef* for depth image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| |
| float *read_imagef*(read_only image2d_array_depth_t _image_,
  sampler_t _sampler_, int4 _coord_) +
  float *read_imagef*(read_only image2d_array_depth_t _image_,
  sampler_t _sampler_, float4 _coord_)
    | Use _coord.xy_ to do an element lookup in the 2D image identified by
      _coord.z_ in the 2D depth image array specified by _image_.

      *read_imagef* returns a floating-point value in the range [0.0, 1.0]
      for depth image objects created with _image_channel_data_type_ set to
      `CL_UNORM_INT16` or `CL_UNORM_INT24`.

      *read_imagef* returns a floating-point value for depth image objects
      created with _image_channel_data_type_ set to `CL_FLOAT`.

      The *read_imagef* calls that take integer coordinates must use a
      sampler with filter mode set to `CLK_FILTER_NEAREST`, normalized
      coordinates set to `CLK_NORMALIZED_COORDS_FALSE` and addressing mode
      set to `CLK_ADDRESS_CLAMP_TO_EDGE`, `CLK_ADDRESS_CLAMP` or
      `CLK_ADDRESS_NONE`; otherwise the values returned are undefined.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| |
|====
--


[[built-in-image-sampler-less-read-functions]]
==== Built-in Image Sampler-less Read Functions

[open,refpage='imageSamplerlessReadFunctions',desc='Built-in Image Sampler-less Read Functions',type='freeform',spec='clang',anchor='built-in-image-sampler-less-read-functions',xrefs='imageQueryFunctions imageReadFunctions imageWriteFunctions']
--

NOTE: Sampler-less image read functions <<unified-spec, require>> support for
OpenCL C 1.2 or newer, with some functions requiring support for newer
versions of OpenCL C as noted in the <<table-image-samplerless-read, table
below>>.

The sampler-less image read functions behave exactly as the corresponding
<<built-in-image-read-functions,built-in image read functions>> that take
integer coordinates and a sampler with filter mode set to
`CLK_FILTER_NEAREST`, normalized coordinates set to
`CLK_NORMALIZED_COORDS_FALSE` and addressing mode to `CLK_ADDRESS_NONE`.
There is one exception when the _image_channel_data_type_ is a floating
point type (such as `CL_FLOAT`).
In this exceptional case, when channel data values are denormalized, the
sampler-less image read function may return the denormalized data, while
the image read function with a sampler argument may flush the denormalized
channel data values to zero.

_aQual_ in the following table refers to one of the access qualifiers.
For samplerless read functions this may be `read_only` or `read_write`.

[[table-image-samplerless-read]]
.Built-in Image Sampler-less Read Functions
[cols=",",]
|====
| *Function* | *Description*
| float4 *read_imagef*(_aQual_ image2d_t _image_, int2 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_) to do an element lookup in
      the 2D image object specified by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.
| |
| int4 *read_imagei*(_aQual_ image2d_t _image_, int2 _coord_) +
  uint4 *read_imageui*(_aQual_ image2d_t _image_, int2 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_) to do an element lookup in
      the 2D image object specified by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively. Each channel will be stored
      in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.
| |
| float4 *read_imagef*(_aQual_ image3d_t _image_, int4 _coord_ )
    | Use the coordinate (_coord.x_, _coord.y_, _coord.z_) to do an element
      lookup in the 3D image object specified by _image_.
      _coord.w_ is ignored.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description are
      undefined.
| |
| int4 *read_imagei*(_aQual_ image3d_t _image_, int4 _coord_) +
  uint4 *read_imageui*(_aQual_ image3d_t _image_, int4 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_, _coord.z_) to do an element
      lookup in the 3D image object specified by _image_.
      _coord.w_ is ignored.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively.
      Each channel will be stored in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.
| |
| float4 *read_imagef*(_aQual_ image2d_array_t _image_, int4 _coord_)
    | Use _coord.xy_ to do an element lookup in the 2D image identified by
      _coord.z_ in the 2D image array specified by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.
| |
| int4 *read_imagei*(_aQual_ image2d_array_t _image_, int4 _coord_) +
  uint4 *read_imageui*(_aQual_ image2d_array_t _image_, int4 _coord_)
    | Use _coord.xy_ to do an element lookup in the 2D image identified by
      _coord.z_ in the 2D image array specified by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively. Each channel will be stored
      in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.
| |
| float4 *read_imagef*(_aQual_ image1d_t _image_, int _coord_) +
  float4 *read_imagef*(_aQual_ image1d_buffer_t _image_, int _coord_)
    | Use _coord_ to do an element lookup in the 1D image or 1D image buffer
      object specified by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.
| |
| int4 *read_imagei*(_aQual_ image1d_t _image_, int _coord_) +
  uint4 *read_imageui*(_aQual_ image1d_t _image_, int _coord_) +
  int4 *read_imagei*(_aQual_ image1d_buffer_t _image_, int _coord_) +
  uint4 *read_imageui*(_aQual_ image1d_buffer_t _image_, int _coord_)
    | Use _coord_ to do an element lookup in the 1D image or 1D image buffer
      object specified by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively. Each channel will be stored
      in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.
| |
| float4 *read_imagef*(_aQual_ image1d_array_t _image_, int2 _coord_)
    | Use _coord.x_ to do an element lookup in the 1D image identified by
      _coord.y_ in the 1D image array specified by _image_.

      *read_imagef* returns floating-point values in the range [0.0, 1.0]
      for image objects created with _image_channel_data_type_ set to one of
      the pre-defined packed formats or `CL_UNORM_INT8`, or
      `CL_UNORM_INT16`.

      *read_imagef* returns floating-point values in the range [-1.0, 1.0]
      for image objects created with _image_channel_data_type_ set to
      `CL_SNORM_INT8`, or `CL_SNORM_INT16`.

      *read_imagef* returns floating-point values for image objects created
      with _image_channel_data_type_ set to `CL_HALF_FLOAT` or `CL_FLOAT`.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.
| |
| int4 *read_imagei*(_aQual_ image1d_array_t _image_, int2 _coord_) +
  uint4 *read_imageui*(_aQual_ image1d_array_t _image_, int2 _coord_)
    | Use _coord.x_ to do an element lookup in the 1D image identified by
      _coord.y_ in the 1D image array specified by _image_.

      *read_imagei* and *read_imageui* return unnormalized signed integer
      and unsigned integer values respectively. Each channel will be stored
      in a 32-bit integer.

      *read_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imagei* are undefined.

      *read_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      If the _image_channel_data_type_ is not one of the above values, the
      values returned by *read_imageui* are undefined.
| |
| float *read_imagef*(_aQual_ image2d_depth_t _image_, int2 _coord_)
    | Use the coordinate (_coord.x_, _coord.y_) to do an element lookup in
      the 2D depth image object specified by _image_.

      *read_imagef* returns a floating-point value in the range [0.0, 1.0]
      for depth image objects created with _image_channel_data_type_ set to
      `CL_UNORM_INT16` or `CL_UNORM_INT24`.

      *read_imagef* returns a floating-point value for depth image objects
      created with _image_channel_data_type_ set to `CL_FLOAT`.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| |
| float *read_imagef*(_aQual_ image2d_array_depth_t _image_, int4 _coord_)
    | Use _coord.xy_ to do an element lookup in the 2D image identified by
      _coord.z_ in the 2D depth image array specified by _image_.

      *read_imagef* returns a floating-point value in the range [0.0, 1.0]
      for depth image objects created with _image_channel_data_type_ set to
      `CL_UNORM_INT16` or `CL_UNORM_INT24`.

      *read_imagef* returns a floating-point value for depth image objects
      created with _image_channel_data_type_ set to `CL_FLOAT`.

      Values returned by *read_imagef* for image objects with
      _image_channel_data_type_ values not specified in the description
      above are undefined.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| |
|====
--


[[built-in-image-write-functions]]
==== Built-in Image Write Functions

[open,refpage='imageWriteFunctions',desc='Built-in Image Write Functions',type='freeform',spec='clang',anchor='built-in-image-write-functions',xrefs='imageQueryFunctions imageReadFunctions imageSamplerlessReadFunctions',alias='write_imagef write_imagei write_imageui']
--

The following built-in function calls to write images are supported.

_aQual_ in the following table refers to one of the access qualifiers.
For write functions this may be `write_only` or `read_write`.

[[table-image-write]]
.Built-in Image Write Functions
[cols=",",]
|====
| *Function* | *Description*
| void *write_imagef*(_aQual_ image2d_t _image_, int2 _coord_, float4 _color_) +
  void *write_imagei*(_aQual_ image2d_t _image_, int2 _coord_, int4 _color_) +
  void *write_imageui*(_aQual_ image2d_t _image_, int2 _coord_, uint4 _color_)
    | Write _color_ value to location specified by _coord.xy_ in the 2D
      image object specified by _image_.
      Appropriate data format conversion to the specified image format is
      done before writing the color value.
      _coord.x_ and _coord.y_ are considered to be unnormalized coordinates,
      and must be in the range [0, image width-1] and [0, image height-1]
      respectively.

      *write_imagef* can only be used with image objects created with
      _image_channel_data_type_ set to one of the pre-defined packed formats
      or set to `CL_SNORM_INT8`, `CL_UNORM_INT8`, `CL_SNORM_INT16`,
      `CL_UNORM_INT16`, `CL_HALF_FLOAT` or `CL_FLOAT`.
      Appropriate data format conversion will be done to convert channel
      data from a floating-point value to actual data format in which the
      channels are stored.

      *write_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      *write_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      The behavior of *write_imagef*, *write_imagei* and *write_imageui* for
      image objects created with _image_channel_data_type_ values not
      specified in the description above or with _x_ and _y_ coordinate
      values that are not in the range [0, image width-1] and [0, image
      height-1], respectively, is undefined.
| |
| void *write_imagef*(_aQual_ image2d_array_t _image_, int4 _coord_,
  float4 _color_) +
  void *write_imagei*(_aQual_ image2d_array_t _image_, int4 _coord_,
  int4 _color_) +
  void *write_imageui*(_aQual_ image2d_array_t _image_, int4 _coord_,
  uint4 _color_)
    | Write _color_ value to location specified by _coord.xy_ in the 2D
      image identified by _coord.z_ in the 2D image array specified by
      _image_.
      Appropriate data format conversion to the specified image format is
      done before writing the color value.
      _coord.x_, _coord.y_ and _coord.z_ are considered to be unnormalized
      coordinates, and must be in the range [0, image width-1] and [0, image
      height-1], and [0, image number of layers-1], respectively.

      *write_imagef* can only be used with image objects created with
      _image_channel_data_type_ set to one of the pre-defined packed formats
      or set to `CL_SNORM_INT8`, `CL_UNORM_INT8`, `CL_SNORM_INT16`,
      `CL_UNORM_INT16`, `CL_HALF_FLOAT` or `CL_FLOAT`.
      Appropriate data format conversion will be done to convert channel
      data from a floating-point value to actual data format in which the
      channels are stored.

      *write_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      *write_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      The behavior of *write_imagef*, *write_imagei* and *write_imageui* for
      image objects created with _image_channel_data_type_ values not
      specified in the description above or with (_x_, _y_, _z_) coordinate
      values that are not in the range [0, image width-1], [0, image
      height-1], and [0, image number of layers-1], respectively, is
      undefined.
| |
| void *write_imagef*(_aQual_ image1d_t _image_, int _coord_,
  float4 _color_) +
  void *write_imagei*(_aQual_ image1d_t _image_, int _coord_,
  int4 _color_) +
  void *write_imageui*(_aQual_ image1d_t _image_, int _coord_,
  uint4 _color_) +
  void *write_imagef*(_aQual_ image1d_buffer_t _image_, int _coord_,
  float4 _color_) +
  void *write_imagei*(_aQual_ image1d_buffer_t _image_, int _coord_,
  int4 _color_) +
  void *write_imageui*(_aQual_ image1d_buffer_t _image_, int _coord_,
  uint4 _color_)
    | Write _color_ value to location specified by _coord_ in the 1D image
      or 1D image buffer object specified by _image_.
      Appropriate data format conversion to the specified image format is
      done before writing the color value.
      _coord_ is considered to be an unnormalized coordinate, and must be in
      the range [0, image width-1].

      *write_imagef* can only be used with image objects created with
      _image_channel_data_type_ set to one of the pre-defined packed formats
      or set to `CL_SNORM_INT8`, `CL_UNORM_INT8`, `CL_SNORM_INT16`,
      `CL_UNORM_INT16`, `CL_HALF_FLOAT` or `CL_FLOAT`.
      Appropriate data format conversion will be done to convert channel
      data from a floating-point value to actual data format in which the
      channels are stored.

      *write_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      *write_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      The behavior of *write_imagef*, *write_imagei* and *write_imageui* for
      image objects created with _image_channel_data_type_ values not
      specified in the description above, or with a coordinate value that is
      not in the range [0, image width-1], is undefined.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| |
| void *write_imagef*(_aQual_ image1d_array_t _image_, int2 _coord_,
  float4 _color_) +
  void *write_imagei*(_aQual_ image1d_array_t _image_, int2 _coord_,
  int4 _color_) +
  void *write_imageui*(_aQual_ image1d_array_t _image_, int2 _coord_,
  uint4 _color_)
    | Write _color_ value to location specified by _coord.x_ in the 1D image
      identified by _coord.y_ in the 1D image array specified by _image_.
      Appropriate data format conversion to the specified image format is
      done before writing the color value.
      _coord.x_ and _coord.y_ are considered to be unnormalized coordinates
      and must be in the range [0, image width-1] and [0, image number of
      layers-1], respectively.

      *write_imagef* can only be used with image objects created with
      _image_channel_data_type_ set to one of the pre-defined packed formats
      or set to `CL_SNORM_INT8`, `CL_UNORM_INT8`, `CL_SNORM_INT16`,
      `CL_UNORM_INT16`, `CL_HALF_FLOAT` or `CL_FLOAT`.
      Appropriate data format conversion will be done to convert channel
      data from a floating-point value to actual data format in which the
      channels are stored.

      *write_imagei* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      *write_imageui* can only be used with image objects created with
      _image_channel_data_type_ set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      The behavior of *write_imagef*, *write_imagei* and *write_imageui* for
      image objects created with _image_channel_data_type_ values not
      specified in the description above or with (_x_, _y_) coordinate
      values that are not in the range [0, image width-1] and [0, image
      number of layers-1], respectively, is undefined.

      <<unified-spec, Requires>> support for OpenCL C 1.2 or newer.
| |
| void *write_imagef*(_aQual_ image2d_depth_t _image_, int2 _coord_,
  float _depth_)
    | Write _depth_ value to location specified by _coord.xy_ in the 2D
      depth image object specified by _image_.
      Appropriate data format conversion to the specified image format is
      done before writing the depth value.
      _coord.x_ and _coord.y_ are considered to be unnormalized coordinates,
      and must be in the range [0, image width-1], and [0, image height-1],
      respectively.

      *write_imagef* can only be used with image objects created with
      _image_channel_data_type_ set to `CL_UNORM_INT16`, `CL_UNORM_INT24` or
      `CL_FLOAT`.
      Appropriate data format conversion will be done to convert depth valye
      from a floating-point value to actual data format associated with the
      image.

      The behavior of *write_imagef*, *write_imagei* and *write_imageui* for
      image objects created with _image_channel_data_type_ values not
      specified in the description above or with (_x_, _y_) coordinate
      values that are not in the range [0, image width-1] and [0, image
      height-1], respectively, is undefined.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| |
| void *write_imagef*(_aQual_ image2d_array_depth_t _image_, int4 _coord_,
  float _depth_)
    | Write _depth_ value to location specified by _coord.xy_ in the 2D
      image identified by _coord.z_ in the 2D depth image array specified by
      _image_.
      Appropriate data format conversion to the specified image format is
      done before writing the depth value.
      _coord.x_, _coord.y_ and _coord.z_ are considered to be unnormalized
      coordinates, and must be in the range [0, image width-1], [0, image
      height-1], and [0, image number of layers-1], respectively.

      *write_imagef* can only be used with image objects created with
      _image_channel_data_type_ set to `CL_UNORM_INT16`, `CL_UNORM_INT24` or
      `CL_FLOAT`.
      Appropriate data format conversion will be done to convert depth valye
      from a floating-point value to actual data format associated with the
      image.

      The behavior of *write_imagef*, *write_imagei* and *write_imageui* for
      image objects created with _image_channel_data_type_ values not
      specified in the description above or with (_x_, _y_, _z_) coordinate
      values that are not in the range [0, image width-1], [0, image
      height-1], [0, image number of layers-1], respectively, is undefined.

      <<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
      `cl_khr_depth_images` extension.
| |
| void *write_imagef*(_aQual_ image3d_t _image_, int4 _coord_,
  float4 _color_) +
  void *write_imagei*(_aQual_ image3d_t _image_, int4 _coord_,
  int4 _color_) +
  void *write_imageui*(_aQual_ image3d_t _image_, int4 _coord_,
  uint4 _color_)
    | Write color value to location specified by _coord.xyz_ in the 3D image
      object specified by _image_.
      Appropriate data format conversion to the specified image format is
      done before writing the color value.
      _coord.x_, _coord.y_ and _coord.z_ are considered to be unnormalized
      coordinates, and must be in the range [0, image width-1], [0, image
      height-1], and [0, image depth-1], respectively.

      *write_imagef* can only be used with image objects created with
      image_channel_data_type set to one of the pre-defined packed formats
      or set to `CL_SNORM_INT8`, `CL_UNORM_INT8`, `CL_SNORM_INT16`,
      `CL_UNORM_INT16`, `CL_HALF_FLOAT` or `CL_FLOAT`.
      Appropriate data format conversion will be done to convert channel
      data from a floating-point value to actual data format in which the
      channels are stored.

      *write_imagei* can only be used with image objects created with
      image_channel_data_type set to one of the following values:

      `CL_SIGNED_INT8`, +
      `CL_SIGNED_INT16` and +
      `CL_SIGNED_INT32`.

      *write_imageui* can only be used with image objects created with
      image_channel_data_type set to one of the following values:

      `CL_UNSIGNED_INT8`, +
      `CL_UNSIGNED_INT16` and +
      `CL_UNSIGNED_INT32`.

      The behavior of *write_imagef*, *write_imagei* and *write_imageui* for
      image objects with _image_channel_data_type_ values not specified in
      the description above or with (_x_, _y_, _z_) coordinate values that
      are not in the range [0, image width-1], [0, image height-1], and [0,
      image depth-1], respectively, is undefined.

      <<unified-spec, Requires>> support for OpenCL C 2.0, or OpenCL C 3.0 or
      newer and the `+__opencl_c_3d_image_writes+` feature, or the
      `cl_khr_3d_image_writes` extension.
|====
--


[[built-in-image-query-functions]]
==== Built-in Image Query Functions

[open,refpage='imageQueryFunctions',desc='Built-in Image Query Functions',type='freeform',spec='clang',anchor='built-in-image-query-functions',xrefs='imageReadFunctions imageSamplerlessReadFunctions imageWriteFunctions',alias='get_image_width get_image_height get_image_depth get_image_channel_data_type get_image_channel_order get_image_dim get_image_array_size']
--

The following built-in function calls to query image information are
supported.

_aQual_ in the following table refers to one of the access qualifiers.
For query functions this may be `read_only`, `write_only` or `read_write`.

[[table-image-query]]
.Built-in Image Query Functions
[cols=",",]
|====
| *Function* | *Description*
| int *get_image_width*(_aQual_ image2d_t _image_) +
  int *get_image_width*(_aQual_ image3d_t _image_) +

  For OpenCL C 1.2 or newer: +

  int *get_image_width*(_aQual_ image1d_t _image_) +
  int *get_image_width*(_aQual_ image1d_buffer_t _image_) +
  int *get_image_width*(_aQual_ image1d_array_t _image_) +
  int *get_image_width*(_aQual_ image2d_array_t _image_) +

  For OpenCL C 2.0 or newer, also see `cl_khr_depth_images` extension: +

  int *get_image_width*(_aQual_ image2d_depth_t _image_) +
  int *get_image_width*(_aQual_ image2d_array_depth_t _image_)
    | Return the image width in pixels.
| int *get_image_height*(_aQual_ image2d_t _image_) +
  int *get_image_height*(_aQual_ image3d_t _image_) +

  For OpenCL C 1.2 or newer: +

  int *get_image_height*(_aQual_ image2d_array_t _image_) +

  For OpenCL C 2.0 or newer, also see `cl_khr_depth_images` extension: +

  int *get_image_height*(_aQual_ image2d_depth_t _image_) +
  int *get_image_height*(_aQual_ image2d_array_depth_t _image_)
    | Return the image height in pixels.
| int *get_image_depth*(image3d_t _image_)
    | Return the image depth in pixels.
| |
| int *get_image_channel_data_type*(_aQual_ image2d_t _image_) +
  int *get_image_channel_data_type*(_aQual_ image3d_t _image_) +

  For OpenCL C 1.2 or newer: +

  int *get_image_channel_data_type*(_aQual_ image1d_t _image_) +
  int *get_image_channel_data_type*(_aQual_ image1d_buffer_t _image_) +
  int *get_image_channel_data_type*(_aQual_ image2d_t _image_) +
  int *get_image_channel_data_type*(_aQual_ image3d_t _image_) +
  int *get_image_channel_data_type*(_aQual_ image1d_array_t _image_) +
  int *get_image_channel_data_type*(_aQual_ image2d_array_t _image_) +

  For OpenCL C 2.0 or newer, also see `cl_khr_depth_images` extension: +

  int *get_image_channel_data_type*(_aQual_ image2d_depth_t _image_) +
  int *get_image_channel_data_type*(_aQual_ image2d_array_depth_t _image_)
    | Return the channel data type. Valid values are:

      `CLK_SNORM_INT8` +
      `CLK_SNORM_INT16` +
      `CLK_UNORM_INT8` +
      `CLK_UNORM_INT16` +
      `CLK_UNORM_SHORT_565` +
      `CLK_UNORM_SHORT_555` +
      `CLK_UNORM_INT_101010` +
      `CLK_SIGNED_INT8` +
      `CLK_SIGNED_INT16` +
      `CLK_SIGNED_INT32` +
      `CLK_UNSIGNED_INT8` +
      `CLK_UNSIGNED_INT16` +
      `CLK_UNSIGNED_INT32` +
      `CLK_HALF_FLOAT` +
      `CLK_FLOAT` +

      Additionally, for OpenCL C 3.0 or newer: +

      `CLK_UNORM_INT_101010_2` footnote:[{fn-CLK_UNORM_INT_101010_2}]
| int *get_image_channel_order*(_aQual_ image2d_t _image_) +
  int *get_image_channel_order*(_aQual_ image3d_t _image_) +

  For OpenCL C 1.2 or newer: +

  int *get_image_channel_order*(_aQual_ image1d_t _image_) +
  int *get_image_channel_order*(_aQual_ image1d_buffer_t _image_) +
  int *get_image_channel_order*(_aQual_ image1d_array_t _image_) +
  int *get_image_channel_order*(_aQual_ image2d_array_t _image_) +

  For OpenCL C 2.0 or newer, also see `cl_khr_depth_images` extension: +

  int *get_image_channel_order*(_aQual_ image2d_depth_t _image_) +
  int *get_image_channel_order*(_aQual_ image2d_array_depth_t _image_)
    | Return the image channel order. Valid values are:

      `CLK_A` +
      `CLK_R` +
      `CLK_RG` +
      `CLK_RA` +
      `CLK_RGB` +
      `CLK_RGBA` +
      `CLK_ARGB` +
      `CLK_BGRA` +
      `CLK_INTENSITY` +
      `CLK_LUMINANCE` +

      Additionally, for OpenCL C 1.1 or newer: +

      `CLK_Rx` +
      `CLK_RGx` +
      `CLK_RGBx` +

      Additionally, for OpenCL C 2.0 or newer: +

      `CLK_ABGR` +
      `CLK_DEPTH` +
      `CLK_sRGB` +
      `CLK_sRGBx` +
      `CLK_sRGBA` +
      `CLK_sBGRA`
| |
| int2 *get_image_dim*(_aQual_ image2d_t _image_) +

  For OpenCL C 1.2 or newer: +

  int2 *get_image_dim*(_aQual_ image2d_array_t _image_) +

  For OpenCL C 2.0 or newer, also see `cl_khr_depth_images` extension: +

  int2 *get_image_dim*(_aQual_ image2d_depth_t _image_) +
  int2 *get_image_dim*(_aQual_ image2d_array_depth_t _image_)
    | Return the 2D image width and height as an int2 type.
      The width is returned in the _x_ component, and the height in the _y_
      component.
| int4 *get_image_dim*(_aQual_ image3d_t _image_)
    | Return the 3D image width, height, and depth as an `int4` type.
      The width is returned in the _x_ component, height in the _y_
      component, depth in the _z_ component and the _w_ component is 0.
| |
| For OpenCL C 1.2 or newer: +

  size_t *get_image_array_size*(_aQual_ image2d_array_t _image_) +

  For OpenCL C 2.0 or newer, also see `cl_khr_depth_images` extension: +

  size_t *get_image_array_size*(_aQual_ image2d_array_depth_t _image_)
    | Return the number of images in the 2D image array.
| For OpenCL C 1.2 or newer: +

  size_t *get_image_array_size*(_aQual_ image1d_array_t _image_)
    | Return the number of images in the 1D image array.
|====

The values returned by *get_image_channel_data_type* and
*get_image_channel_order* as specified in <<table-image-query>> with the
`CLK_` prefixes correspond to the `CL_` prefixes used to describe the
<<opencl-channel-order,image channel order>> and
<<opencl-channel-data-type,data type>> in the <<opencl-spec,OpenCL
Specification>>.
For example, both `CL_UNORM_INT8` and `CLK_UNORM_INT8` refer to an image
channel data type that is an unnormalized unsigned 8-bit integer.
--


[[reading-and-writing-to-the-same-image-in-a-kernel]]
==== Reading and writing to the same image in a kernel

The *atomic_work_item_fence*(`CLK_IMAGE_MEM_FENCE`) built-in function can be
used to make sure that sampler-less writes are visible to later reads by the
same work-item.
Only a scope of `memory_scope_work_item` and an order of
`memory_order_acq_rel` is valid for `atomic_work_item_fence` when passed the
`CLK_IMAGE_MEM_FENCE` flag.
If multiple work-items are writing to and reading from multiple locations in
an image, the *work_group_barrier*(`CLK_IMAGE_MEM_FENCE`) should be used.

Consider the following example:

[source,c]
----------
kernel void
foo(read_write image2d_t img, ... )
{
    int2 coord;
    coord.x = (int)get_global_id(0);
    coord.y = (int)get_global_id(1);

    float4 clr = read_imagef(img, coord);
    ...
    write_imagef(img, coord, clr);

    // required to ensure that following read from image at
    // location coord returns the latest color value.
    atomic_work_item_fence(
        CLK_IMAGE_MEM_FENCE,
        memory_order_acq_rel,
        memory_scope_work_item);

    float4 clr_new = read_imagef(img, coord);
    ...

}
----------


[[mapping-image-channels-to-color-values-returned-by-read_image-and-color-values-passed-to-write_image-to-image-channels]]
==== Mapping image channels to color values returned by read_image and color values passed to write_image to image channels

The following table describes the mapping of the number of channels of an
image element to the appropriate components in the `float4`, `int4` or
`uint4` vector data type for the color values returned by
*read_image{f|i|ui}* or supplied to *write_image{f|i|ui}*.
The unmapped components will be set to 0.0 for red, green and blue channels
and will be set to 1.0 for the alpha channel.

[cols=",",]
|====
| *Channel Order*   | `float4`, `int4` or `uint4` *components of channel data*
| `CL_R`, `CL_Rx`   | (r, 0.0, 0.0, 1.0)
| `CL_A`            | (0.0, 0.0, 0.0, a)
| `CL_RG`, `CL_RGx` | (r, g, 0.0, 1.0)
| `CL_RA`           | (r, 0.0, 0.0, a)
| `CL_RGB`, `CL_RGBx`, `CL_sRGB`, `CL_sRGBx`
                    | (r, g, b, 1.0)
| `CL_RGBA`, `CL_BGRA`, `CL_ARGB`, `CL_ABGR`, `CL_sRGBA`, `CL_sBGRA`
                    | (r, g, b, a)
| `CL_INTENSITY`    | (I, I, I, I)
| `CL_LUMINANCE`    | (L, L, L, 1.0)
|====

For `CL_DEPTH` images, a scalar value is returned by *read_imagef* or
supplied to *write_imagef*.
<<unified-spec, Requires>> support for OpenCL C 2.0 or newer, also see
`cl_khr_depth_images` extension.

[NOTE]
====
A kernel that uses a sampler with the `CL_ADDRESS_CLAMP` addressing mode
with multiple images may result in additional samplers being used internally
by an implementation.
If the same sampler is used with multiple images called via
*read_image{f|i|ui}*, then it is possible that an implementation may need to
allocate an additional sampler to handle the different border color values
that may be needed depending on the image formats being used.
These implementation allocated samplers will count against the maximum
sampler values supported by the device and given by
`CL_DEVICE_MAX_SAMPLERS`.
Enqueuing a kernel that requires more samplers than the implementation can
support will result in a `CL_OUT_OF_RESOURCES` error being returned.
====


[[work-group-functions]]
=== Work-group Collective Functions

[open,refpage='workGroupFunctions',desc='Work-group Collective Functions',type='freeform',spec='clang',anchor='work-group-functions',xrefs='',alias='work_group_all work_group_any work_group_broadcast work_group_reduce work_group_scan_exclusive work_group_scan_inclusive']
--

NOTE: The functionality described in this section <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and the
`+__opencl_c_work_group_collective_functions+` feature.

This section decribes built-in functions that perform collective options
across a work-group.
These built-in functions must be encountered by all work-items in a
work-group executing the kernel.
We use the generic type name `gentype` to indicate the built-in data types
`half` footnote:[{fn-half-supported}], `int`, `uint`, `long`
footnote:[{fn-int64-supported}], `ulong`, `float` or `double`
footnote:[{fn-double-supported}] as the type for the arguments.

[[table-builtin-work-group]]
.Built-in Work-group Collective Functions
[cols=",",]
|====
| *Function* | *Description*
| int *work_group_all*(int _predicate_)
    | Evaluates _predicate_ for all work-items in the work-group and returns
      a non-zero value if _predicate_ evaluates to non-zero for all
      work-items in the work-group.
| int *work_group_any*(int _predicate_)
    | Evaluates _predicate_ for all work-items in the work-group and returns
      a non-zero value if _predicate_ evaluates to non-zero for any
      work-items in the work-group.
| gentype *work_group_broadcast*(gentype _a_, size_t _local_id_) +
  gentype *work_group_broadcast*(gentype _a_, size_t _local_id_x_,
  size_t _local_id_y_) +
  gentype *work_group_broadcast*(gentype _a_, size_t _local_id_x_,
  size_t _local_id_y_, size_t _local_id_z_)
    | Broadcast the value of _x_ for work-item identified by _local_id_ to
      all work-items in the work-group.

      _local_id_ must be the same value for all work-items in the
      work-group.
| gentype *work_group_reduce_<op>*(gentype _x_)
    | Return result of reduction operation specified by *<op>* for all
      values of _x_ specified by work-items in a work-group.
| gentype *work_group_scan_exclusive_<op>*(gentype _x_)
    | Do an exclusive scan operation specified by *<op>* of all values
      specified by work-items in the work-group. The scan results are
      returned for each work-item.

      The scan order is defined by increasing 1D linear global ID within the
      work-group.
| gentype *work_group_scan_inclusive_<op>*(gentype _x_)
    | Do an inclusive scan operation specified by *<op>* of all values
      specified by work-items in the work-group. The scan results are
      returned for each work-item.

      The scan order is defined by increasing 1D linear global ID within the
      work-group.
|====

The *<op>* in *work_group_reduce_<op>*, *work_group_scan_exclusive_<op>* and
*work_group_scan_inclusive_<op>* defines the operator and can be *add*,
*min* or *max*.

The inclusive scan operation takes a binary operator *op* with an identity I
and _n_ (where _n_ is the size of the work-group) elements [a~0~, a~1~, ...
a~n-1~] and returns [a~0~, (a~0~ *op* a~1~), ... (a~0~ *op* a~1~ *op* ...
*op* a~n-1~)].
If *op* = add, the identity I is 0.
If *op* = min, the identity I is `INT_MAX`, `UINT_MAX`, `LONG_MAX`,
`ULONG_MAX`, for `int`, `uint`, `long`, `ulong` types and is `+INF` for
floating-point types.
Similarly if *op* = max, the identity I is `INT_MIN`, 0, `LONG_MIN`, 0 and
`-INF`.

Consider the following example:

[source,c]
----------
void foo(int *p)
{
    ...
    int prefix_sum_val = work_group_scan_inclusive_add(
                            p[get_local_id(0)]);
}
----------

For the example above, let's assume that the work-group size is 8 and _p_
points to the following elements [3 1 7 0 4 1 6 3].
Work-item 0 calls *work_group_scan_inclusive_add* with 3 and returns 3.
Work-item 1 calls *work_group_scan_inclusive_add* with 1 and returns 4.
The full set of values returned by *work_group_scan_inclusive_add* for
work-items 0 ... 7 are [3 4 11 11 15 16 22 25].

The exclusive scan operation takes a binary associative operator *op* with
an identity I and n (where n is the size of the work-group) elements [a~0~,
a~1~, ... a~n-1~] and returns [I, a~0~, (a~0~ *op* a~1~), ... (a~0~ *op*
a~1~ *op* ... *op* a~n-2~)].
For the example above, the exclusive scan add operation on the ordered set
[3 1 7 0 4 1 6 3] would return [0 3 4 11 11 15 16 22].

[NOTE]
====
The order of floating-point operations is not guaranteed for the
*work_group_reduce_<op>*, *work_group_scan_inclusive_<op>* and
*work_group_scan_exclusive_<op>* built-in functions that operate on `half`,
`float` and `double` data types.
The order of these floating-point operations is also non-deterministic for a
given work-group.
====
--


[[pipe-functions]]
=== Pipe Functions

NOTE: The functionality described in this section <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and the `+__opencl_c_pipes+` feature.

A pipe is identified by specifying the `pipe` keyword with a type.
The data type specifies the size of each packet in the pipe.
The `pipe` keyword is a type modifier.
When it is applied to another type *T*, the result is a pipe type whose
elements (or packets) are of type *T*.
The packet type *T* may be any supported OpenCL C scalar and vector integer
or floating-point data types, or a user-defined type built from these scalar
and vector data types.

Examples:

[source,c]
----------
pipe int4 pipeA; // a pipe with int4 packets

pipe user_type_t pipeB; // a pipe with user_type_t packets
----------

The `read_only` (or `+__read_only+`) and `write_only` (or `+__write_only+`)
qualifiers must be used with the `pipe` qualifier when a pipe is a parameter
of a kernel or of a user-defined function to identify if a pipe can be read
from or written to by a kernel and its callees and enqueued child kernels.
If no qualifier is specified, `read_only` is assumed.

A kernel cannot read from and write to the same pipe object.
Using the `read_write` (or `+__read_write+`) qualifier with the `pipe`
qualifier is a compilation error.

In the following example

[source,c]
----------
kernel void
foo (read_only pipe fooA_t pipeA,
     write_only pipe fooB_t pipeB)
{
    ...
}
----------

`pipeA` is a read-only pipe object, and `pipeB` is a write-only pipe object.

The macro `CLK_NULL_RESERVE_ID` refers to an invalid reservation ID.


[[restrictions-3]]
==== Restrictions

  * Pipes can only be passed as arguments to a function (including kernel
    functions).
    The <<operators,C operators>> cannot be used with variables declared
    with the pipe qualifier.
  * The `pipe` qualifier cannot be used with variables declared inside a
    kernel, a structure or union field, a pointer type, an array, global
    variables declared in program scope or the return type of a function.


[[built-in-pipe-read-and-write-functions]]
==== Built-in Pipe Read and Write Functions

[open,refpage='pipeFunctions',desc='Built-in Pipe Read and Write Functions',type='freeform',spec='clang',anchor='built-in-pipe-read-and-write-functions',xrefs='pipeWorkgroupFunctions pipeQueryFunctions',alias='commit_read_pipe commit_write_pipe is_valid_reserve_id read_pipe reserve_read_pipe reserve_write_pipe write_pipe']
--

The OpenCL C programming language implements the following built-in
functions that read from or write to a pipe.
We use the generic type name `gentype` to indicate the built-in OpenCL C scalar
or vector integer or floating-point data types
footnote:[{fn-float-types-supported}] or any user defined type built from these
scalar and vector data types can be used as the type for the arguments to the
pipe functions listed in the following table.

[[table-builtin-pipe]]
.Built-in Pipe Functions
[cols=",",]
|====
| *Function* | *Description*
| int *read_pipe*(read_only pipe gentype _p_, gentype *_ptr_)
    | Read packet from pipe _p_ into _ptr_.
      Returns 0 if *read_pipe* is successful and a negative value if the
      pipe is empty.
| |
| int *write_pipe*(write_only pipe gentype _p_, const gentype *_ptr_)
    | Write packet specified by _ptr_ to pipe _p_.
      Returns 0 if *write_pipe* is successful and a negative value if the
      pipe is full.
| int *read_pipe*(read_only pipe gentype _p_, reserve_id_t _reserve_id_,
  uint _index_, gentype *_ptr_)
    | Read packet from the reserved area of the pipe referred to by
      _reserve_id_ and _index_ into _ptr_.

      The reserved pipe entries are referred to by indices that go from 0
      ... _num_packets_ - 1.

      Returns 0 if *read_pipe* is successful and a negative value otherwise.
| int *write_pipe*(write_only pipe gentype _p_, reserve_id_t
  _reserve_id_, uint _index_, const gentype *_ptr_)
    | Write packet specified by _ptr_ to the reserved area of the pipe
      referred to by _reserve_id_ and _index_.

      The reserved pipe entries are referred to by indices that go from 0
      ... _num_packets_ - 1.

      Returns 0 if *write_pipe* is successful and a negative value
      otherwise.
| |
| reserve_id_t *reserve_read_pipe*(read_only pipe gentype _p_,
  uint _num_packets_) +
  reserve_id_t *reserve_write_pipe*(write_only pipe gentype _p_,
  uint _num_packets_)
    | Reserve _num_packets_ entries for reading from or writing to pipe _p_.
      Returns a valid reservation ID if the reservation is successful.
| void *commit_read_pipe*(read_only pipe gentype _p_,
  reserve_id_t _reserve_id_) +
  void *commit_write_pipe*(write_only pipe gentype _p_,
  reserve_id_t _reserve_id_)
    | Indicates that all reads and writes to _num_packets_ associated with
      reservation _reserve_id_ are completed.
| bool *is_valid_reserve_id*(reserve_id_t _reserve_id_)
    | Return _true_ if _reserve_id_ is a valid reservation ID and _false_
      otherwise.
|====
--


[[built-in-work-group-pipe-read-and-write-functions]]
==== Built-in Work-group Pipe Read and Write Functions

[open,refpage='pipeWorkgroupFunctions',desc='Built-in Work-group Pipe Read and Write Functions',type='freeform',spec='clang',anchor='built-in-work-group-pipe-read-and-write-functions',xrefs='pipeFunctions pipeQueryFunctions',alias='work_group_commit_read_pipe work_group_commit_write_pipe work_group_reserve_read_pipe work_group_reserve_write_pipe']
--

The OpenCL C programming language implements the following built-in pipe
functions that operate at a work-group level.
These built-in functions must be encountered by all work-items in a
work-group executing the kernel with the same argument values; otherwise the
behavior is undefined.
We use the generic type name `gentype` to indicate the built-in OpenCL C scalar
or vector integer or floating-point data types
footnote:[{fn-float-types-supported}] or any user defined type built from these
scalar and vector data types can be used as the type for the arguments to the
pipe functions listed in the following table.

[[table-builtin-pipe-work-group]]
.Built-in Pipe Work-group Functions
[cols=",",]
|====
| *Function* | *Description*
| reserve_id_t *work_group_reserve_read_pipe*(read_only pipe gentype _p_,
  uint _num_packets_) +
  reserve_id_t *work_group_reserve_write_pipe*(write_only pipe gentype _p_,
  uint _num_packets_)
    | Reserve _num_packets_ entries for reading from or writing to pipe _p_.
      Returns a valid reservation ID if the reservation is successful.

      The reserved pipe entries are referred to by indices that go from 0
      ... _num_packets_ - 1.
| void *work_group_commit_read_pipe*(read_only pipe gentype _p_,
  reserve_id_t _reserve_id_)
  void *work_group_commit_write_pipe*(write_only pipe gentype _p_,
  reserve_id_t _reserve_id_)
    | Indicates that all reads and writes to _num_packets_ associated with
      reservation _reserve_id_ are completed.
|====

[NOTE]
====
The *read_pipe* and *write_pipe* functions that take a reservation ID as an
argument can be used to read from or write to a packet index.
These built-ins can be used to read from or write to a packet index one or
multiple times.
If a packet index that is reserved for writing is not written to using the
*write_pipe* function, the contents of that packet in the pipe are
undefined.
*commit_read_pipe* and *work_group_commit_read_pipe* remove the entries
reserved for reading from the pipe.
*commit_write_pipe* and *work_group_commit_write_pipe* ensures that the
entries reserved for writing are all added in-order as one contiguous set of
packets to the pipe.
====

There can only be the value of the <<opencl-device-queries,
`CL_DEVICE_PIPE_MAX_ACTIVE_RESERVATIONS` device query>> reservations active
(i.e. reservation IDs that have been reserved but not committed) per
work-item or work-group for a pipe in a kernel executing on a device.

Work-item based reservations made by a work-item are ordered in the pipe as
they are ordered in the program.
Reservations made by different work-items that belong to the same work-group
can be ordered using the work-group barrier function.
The order of work-item based reservations that belong to different
work-groups is implementation defined.

Work-group based reservations made by a work-group are ordered in the pipe
as they are ordered in the program.
The order of work-group based reservations by different work-groups is
implementation defined.
--


[[built-in-pipe-query-functions]]
==== Built-in Pipe Query Functions

[open,refpage='pipeQueryFunctions',desc='Built-in Pipe Query Functions',type='freeform',spec='clang',anchor='built-in-pipe-query-functions',xrefs='pipeFunctions pipeWorkgroupFunctions',alias='get_pipe_max_packets get_pipe_num_packets']
--

The OpenCL C programming language implements the following built-in query
functions for a pipe.
We use the generic type name `gentype` to indicate the built-in OpenCL C scalar
or vector integer or floating-point data types
footnote:[{fn-float-types-supported}] or any user defined type built from these
scalar and vector data types can be used as the type for the arguments to the
pipe functions listed in the following table.

_aQual_ in the following table refers to one of the access qualifiers.
For pipe query functions this may be `read_only` or `write_only`.

[[table-builtin-pipe-query]]
.Built-in Pipe Query Functions
[cols=",",]
|====
| *Function* | *Description*
| uint *get_pipe_num_packets*(_aQual_ pipe gentype _p_)
    | Returns the number of available entries in the pipe.
      The number of available entries in a pipe is a dynamic value.
      The value returned should be considered immediately stale.
| uint *get_pipe_max_packets*(_aQual_ pipe gentype _p_)
    | Returns the maximum number of packets specified when _pipe_ was
      created.
|====
--


[[restrictions-4]]
==== Restrictions

The following behavior is undefined:

  * A kernel fails to call *reserve_pipe* before calling *read_pipe* or
    *write_pipe* that take a reservation ID.
  * A kernel calls *read_pipe*, *write_pipe*, *commit_read_pipe* or
    *commit_write_pipe* with an invalid reservation ID.
  * A kernel calls *read_pipe* or *write_pipe* with an valid reservation ID
    but with an _index_ that is not a value in the range [0,
    _num_packets_-1] specified to the corresponding call to _reserve_pipe_.
  * A kernel calls *read_pipe* or *write_pipe* with a reservation ID that
    has already been committed (i.e. a *commit_read_pipe* or
    *commit_write_pipe* with this reservation ID has already been called).
  * A kernel fails to call *commit_read_pipe* for any reservation ID
    obtained by a prior call to *reserve_read_pipe*.
  * A kernel fails to call *commit_write_pipe* for any reservation ID
    obtained by a prior call to *reserve_write_pipe*.
  * The contents of the reserved data packets in the pipe are undefined if
    the kernel does not call *write_pipe* for all entries that were reserved
    by the corresponding call to *reserve_pipe*.
  * Calls to *read_pipe* that takes a reservation ID and *commit_read_pipe*
    or *write_pipe* that takes a reservation ID and *commit_write_pipe* for
    a given reservation ID must be called by the same kernel that made the
    reservation using *reserve_read_pipe* or *reserve_write_pipe*.
    The reservation ID cannot be passed to another kernel including child
    kernels.


[[enqueuing-kernels]]
=== Enqueuing Kernels

[open,refpage='enqueue_kernel',desc='Enqueuing Kernels',type='freeform',spec='clang',anchor='enqueuing-kernels',xrefs='enqueue_marker']
--
NOTE: The functionality described in this section <<unified-spec, requires>>
support for OpenCL C 2.0, or OpenCL C 3.0 or newer and the
`+__opencl_c_device_enqueue+` feature.

This section describes built-in functions that allow a kernel to
enqueue additional work to the same device, without host interaction.
A kernel may enqueue code represented by Block syntax, and control execution
order with event dependencies including user events and markers.
There are several advantages to using the Block syntax: it is more compact;
it does not require a cl_kernel object; and enqueuing can be done as a
single semantic step.

The following table describes the list of built-in functions that can be
used to enqueue a kernel(s).

The macro `CLK_NULL_EVENT` refers to an invalid device event.
The macro `CLK_NULL_QUEUE` refers to an invalid device queue.
--


[[built-in-functions-enqueuing-a-kernel]]
==== Built-in Functions - Enqueuing a kernel

[[table-builtin-kernel-enqueue]]
.Built-in Kernel Enqueue Functions
[cols=",",]
|====
| *Built-in Function* | *Description*

| int **enqueue_kernel**(queue_t _queue_, kernel_enqueue_flags_t _flags_,
  const ndrange_t _ndrange_, void (^__block__)(void)) +
  int **enqueue_kernel**(queue_t _queue_, kernel_enqueue_flags_t _flags_,
  const ndrange_t _ndrange_, uint _num_events_in_wait_list_,
  const clk_event_t *_event_wait_list_, clk_event_t *_event_ret_,
  void (^__block__)(void)) +
  int **enqueue_kernel**(queue_t _queue_, kernel_enqueue_flags_t _flags_,
  const ndrange_t _ndrange_, void (^__block__)(local void *, ...),
  uint size0, ...) +
  int **enqueue_kernel**(queue_t _queue_, kernel_enqueue_flags_t _flags_,
  const ndrange_t _ndrange_, uint _num_events_in_wait_list_,
  const clk_event_t *_event_wait_list_, clk_event_t *_event_ret_,
  void (^__block__)(local void *, ...), uint size0, ...)
    | Enqueue the block for execution to _queue_.

      If an event is returned, *enqueue_kernel* performs an implicit retain
      on the returned event.
|====

The *enqueue_kernel* built-in function allows a work-item to enqueue a
block.
Work-items can enqueue multiple blocks to a device queue(s).

The *enqueue_kernel* built-in function returns `CLK_SUCCESS` if the block is
enqueued successfully and returns `CLK_ENQUEUE_FAILURE` otherwise.
If the -g compile option is specified in compiler options passed to
*clCompileProgram* or *clBuildProgram* when compiling or building the parent
program, the following errors may be returned instead of
`CLK_ENQUEUE_FAILURE` to indicate why *enqueue_kernel* failed to enqueue the
block:

  * `CLK_INVALID_QUEUE` if _queue_ is not a valid device queue.
  * `CLK_INVALID_NDRANGE` if _ndrange_ is not a valid ND-range descriptor or
    if the program was compiled with `-cl-uniform-work-group-size` and the
    _local_work_size_ is specified in _ndrange_ but the _global_work_size_
    specified in _ndrange_ is not a multiple of the _local_work_size_.
  * `CLK_INVALID_EVENT_WAIT_LIST` if _event_wait_list_ is `NULL` and
    _num_events_in_wait_list_ > 0, or if _event_wait_list_ is not `NULL` and
    _num_events_in_wait_list_ is 0, or if event objects in _event_wait_list_
    are not valid events.
  * `CLK_DEVICE_QUEUE_FULL` if _queue_ is full.
  * `CLK_INVALID_ARG_SIZE` if size of local memory arguments is 0.
  * `CLK_EVENT_ALLOCATION_FAILURE` if _event_ret_ is not `NULL` and an event
    could not be allocated.
  * `CLK_OUT_OF_RESOURCES` if there is a failure to queue the block in
    _queue_ because of insufficient resources needed to execute the kernel.

Below are some examples of how to enqueue a block.

[source,c]
----------
kernel void
my_func_A(global int *a, global int *b, global int *c)
{
    ...
}

kernel void
my_func_B(global int *a, global int *b, global int *c)
{
    ndrange_t ndrange;
    // build ndrange information
    ...

    // example - enqueue a kernel as a block
    enqueue_kernel(get_default_queue(), ndrange,
                   ^{my_func_A(a, b, c);});

    ...
}

kernel void
my_func_C(global int *a, global int *b, global int *c)
{
    ndrange_t ndrange;
    // build ndrange information
    ...

    // note that a, b and c are variables in scope of
    // the block
    void (^my_block_A)(void) = ^{my_func_A(a, b, c);};

    // enqueue the block variable
    enqueue_kernel(get_default_queue(),
                   CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                   ndrange,
                   my_block_A);
    ...
}
----------

The example below shows how to declare a block literal and enqueue it.

[source,c]
----------
kernel void
my_func(global int *a, global int *b)
{
    ndrange_t ndrange;
    // build ndrange information
    ...

    // note that a, b and c are variables in scope of
    // the block
    void (^my_block_A)(void) =
    ^{
        size_t id = get_global_id(0);
        b[id] += a[id];
    };

    // enqueue the block variable
    enqueue_kernel(get_default_queue(),
                   CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                   ndrange,
                   my_block_A);

    // or we could have done the following
    enqueue_kernel(get_default_queue(),
                   CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                   ndrange,
                   ^{
                       size_t id = get_global_id(0);
                       b[id] += a[id];
                   };
}
----------

[NOTE]
====
Blocks passed to enqueue_kernel cannot use global variables or stack
variables local to the enclosing lexical scope that are a pointer type in
the `local` or `private` address space.
====

Example:

[source,c]
----------
kernel void
foo(global int *a, local int *lptr, ...)
{
    enqueue_kernel(get_default_queue(),
                   CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                   ndrange,
                   ^{
                       size_t id = get_global_id(0);
                       local int *p = lptr; // undefined behavior
                   } );
}
----------


[[arguments-that-are-a-pointer-type-to-local-address-space]]
==== Arguments that are a pointer type to local address space

A block passed to enqueue_kernel can have arguments declared to be a pointer
to `local` memory.
The enqueue_kernel built-in function variants allow blocks to be enqueued
with a variable number of arguments.
Each argument must be declared to be a `void` pointer to local memory.
These enqueue_kernel built-in function variants also have a corresponding
number of arguments each of type `uint` that follow the block argument.
These arguments specify the size of each local memory pointer argument of
the enqueued block.

Some examples follow:

[source,c]
----------
kernel void
my_func_A_local_arg1(global int *a, local int *lptr, ...)
{
    ...
}

kernel void
my_func_A_local_arg2(global int *a,
                     local int *lptr1, local float4 *lptr2, ...)
{
    ...
}

kernel void
my_func_B(global int *a, ...)
{
    ...

    ndrange_t ndrange = ndrange_1D(...);

    uint local_mem_size = compute_local_mem_size();

    enqueue_kernel(get_default_queue(),
                   CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                   ndrange,
                   ^(local void *p){
                       my_func_A_local_arg1(a, (local int *)p, ...);},
                   local_mem_size);
}

kernel void
my_func_C(global int *a, ...)
{
    ...
    ndrange_t ndrange = ndrange_1D(...);

    void (^my_blk_A)(local void *, local void *) =
        ^(local void *lptr1, local void *lptr2){
        my_func_A_local_arg2(
            a,
            (local int *)lptr1,
            (local float4 *)lptr2, ...);};

    // calculate local memory size for lptr
    // argument in local address space for my_blk_A
    uint local_mem_size = compute_local_mem_size();

    enqueue_kernel(get_default_queue(),
                   CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                   ndrange,
                   my_blk_A,
                   local_mem_size, local_mem_size*4);
}
----------


[[a-complete-example]]
==== A Complete Example

The example below shows how to implement an iterative algorithm where the
host enqueues the first instance of the nd-range kernel (dp_func_A).
The kernel dp_func_A will launch a kernel (evaluate_dp_work_A) that will
determine if new nd-range work needs to be performed.
If new nd-range work does need to be performed, then evaluate_dp_work_A will
enqueue a new instance of dp_func_A .
This process is repeated until all the work is completed.

[source,c]
----------
kernel void
dp_func_A(queue_t q, ...)
{
    ...

    // queue a single instance of evaluate_dp_work_A to
    // device queue q. queued kernel begins execution after
    // kernel dp_func_A finishes

    if (get_global_id(0) == 0)
    {
        enqueue_kernel(q,
                       CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                       ndrange_1D(1),
                       ^{evaluate_dp_work_A(q, ...);});
    }
}

kernel void
evaluate_dp_work_A(queue_t q,...)
{
    // check if more work needs to be performed
    bool more_work = check_new_work(...);
    if (more_work)
    {
        size_t global_work_size = compute_global_size(...);

        void (^dp_func_A_blk)(void) =
            ^{dp_func_A(q, ...});

        // get local WG-size for kernel dp_func_A
        size_t local_work_size =
            get_kernel_work_group_size(dp_func_A_blk);

        // build nd-range descriptor
        ndrange_t ndrange = ndrange_1D(global_work_size,
                                       local_work_size);

        // enqueue dp_func_A
        enqueue_kernel(q,
                       CLK_ENQUEUE_FLAGS_WAIT_KERNEL,
                       ndrange,
                       dp_func_A_blk);
    }
    ...
}
----------


[[determining-when-a-child-kernel-begins-execution]]
==== Determining when a child kernel begins execution

The `kernel_enqueue_flags_t` footnote:[{fn-dse-kernel_enqueue_flags_t}] argument
to the `enqueue_kernel` built-in functions can be used to specify when the child
kernel begins execution.
Supported values are described in the table below:

[[table-kernel-enqueue-flags]]
.Kernel Enqueue Flags
[cols=",",]
|====
| `kernel_enqueue_flags_t` *enum* | *Description*
| `CLK_ENQUEUE_FLAGS_NO_WAIT`
    | Indicates that the enqueued kernels do not need to wait for the parent
      kernel to finish execution before they begin execution.
| `CLK_ENQUEUE_FLAGS_WAIT_KERNEL`
    | Indicates that all work-items of the parent kernel must finish
      executing and all immediate footnote:[{fn-dse-immediate-definition}] side
      effects committed before the enqueued child kernel may begin execution.
| `CLK_ENQUEUE_FLAGS_WAIT_WORK_GROUP`
    | Indicates that the enqueued kernels wait only for the workgroup that
      enqueued the kernels to finish before they begin execution.
      footnote:[{fn-dse-CLK_ENQUEUE_FLAGS_WAIT_WORK_GROUP}]
|====

[NOTE]
====
The `kernel_enqueue_flags_t` flags are useful when a kernel enqueued from
the host and executing on a device enqueues kernels on the device.
The kernel enqueued from the host may not have an event associated with it.
The `kernel_enqueue_flags_t` flags allow the developer to indicate when the
child kernels can begin execution.
====


[[determining-when-a-parent-kernel-has-finished-execution]]
==== Determining when a parent kernel has finished execution

A parent kernel's execution status is considered to be complete when it and
all its child kernels have finished execution.
The execution status of a parent kernel will be `CL_COMPLETE` if this kernel
and all its child kernels finish execution successfully.
The execution status of the kernel will be an error code (given by a
negative integer value) if it or any of its child kernels encounter an
error, or are abnormally terminated.

For example, assume that the host enqueues a kernel `k` for execution on a
device.
Kernel `k` when executing on the device enqueues kernels `A` and `B` to a
device queue(s).
The enqueue_kernel call to enqueue kernel `B` specifies the event associated
with kernel `A` in the `event_wait_list` argument, i.e. wait for kernel `A`
to finish execution before kernel `B` can begin execution.
Let's assume kernel `A` enqueues kernels `X`, `Y` and `Z`.
Kernel `A` is considered to have finished execution, i.e. its execution
status is `CL_COMPLETE`, only after `A` and the kernels `A` enqueued (and
any kernels these enqueued kernels enqueue and so on) have finished
execution.


[[built-in-functions-kernel-query-functions]]
==== Built-in Functions - Kernel Query Functions

[open,refpage='kernelQueryFunctions',desc='Built-in Functions - Kernel Query Functions',type='freeform',spec='clang',anchor='built-in-functions-kernel-query-functions',xrefs='enqueue_kernel',alias='get_kernel_preferred get_kernel_work_group_size']
--

[[table-builtin-kernel-query]]
.Built-in Kernel Query Functions
[cols=",",]
|====
| *Built-in Function* | *Description*
| uint *get_kernel_work_group_size*(void (^block)(void)) +
  uint *get_kernel_work_group_size*(void (^block)(local void *, ...))
    | This provides a mechanism to query the maximum work-group size that
      can be used to execute a block on a specific device given by _device_.

      _block_ specifies the block to be enqueued.
| uint *get_kernel_preferred_* *work_group_size_multiple*(
  void (^block)(void)) +
  uint *get_kernel_preferred_* *work_group_size_multiple*(
  void (^block)(local void *, ...))
    | Returns the preferred multiple of work-group size for launch.
      This is a performance hint.
      Specifying a work-group size that is not a multiple of the value
      returned by this query as the value of the local work size argument to
      enqueue_kernel will not fail to enqueue the block for execution unless
      the work-group size specified is larger than the device maximum.
|====
--


[[built-in-functions-queuing-other-commands]]
==== Built-in Functions - Queuing other commands

[open,refpage='enqueue_marker',desc='Built-in Functions - Queuing Other Commands',type='freeform',spec='clang',anchor='built-in-functions-queuing-other-commands',xrefs='enqueue_kernel']
--

The following table describes the list of built-in functions that can be
used to enqueue commands such as a marker.

[[table-builtin-other-enqueue]]
.Built-in Other Enqueue Functions
[cols=",",]
|====
| *Built-in Function* | *Description*
| int *enqueue_marker*(queue_t _queue_, uint _num_events_in_wait_list_,
  const clk_event_t *_event_wait_list_, clk_event_t *_event_ret_)
    | Enqueue a marker command to _queue_.

      The marker command waits for a list of events specified by
      _event_wait_list_ to complete before the marker completes.

      _event_ret_ must not be `NULL` as otherwise this is a no-op.

      If an event is returned, *enqueue_marker* performs an implicit retain
      on the returned event.
|====

The *enqueue_marker* built-in function returns `CLK_SUCCESS` if the marked
command is enqueued successfully and returns `CLK_ENQUEUE_FAILURE`
otherwise.
If the -g compile option is specified in compiler options passed to
*clCompileProgram* or *clBuildProgram*, the following errors may be returned
instead of `CLK_ENQUEUE_FAILURE` to indicate why *enqueue_marker* failed to
enqueue the marker command:

  * `CLK_INVALID_QUEUE` if _queue_ is not a valid device queue.
  * `CLK_INVALID_EVENT_WAIT_LIST` if _event_wait_list_ is `NULL`, or if
    _event_wait_list_ is not `NULL` and _num_events_in_wait_list_ is 0, or
    if event objects in _event_wait_list_ are not valid events.
  * `CLK_DEVICE_QUEUE_FULL` if _queue_ is full.
  * `CLK_EVENT_ALLOCATION_FAILURE` if _event_ret_ is not `NULL` and an event
    could not be allocated.
  * `CLK_OUT_OF_RESOURCES` if there is a failure to queue the block in
    _queue_ because of insufficient resources needed to execute the kernel.
--


[[built-in-functions-event-functions]]
==== Built-in Functions - Event Functions

[open,refpage='eventFunctions',desc='Built-in Event Functions',type='freeform',spec='clang',anchor='built-in-functions-event-functions',xrefs='',alias='capture_event_profiling_info create_user_event is_valid_event release_event retain_event set_user_event_status']
--

The following table describes the list of built-in functions that work on
events.

[[table-builtin-event]]
.Built-in Event Functions
[cols=",",]
|====
| *Built-in Function* | *Description*

| void *retain_event*(clk_event_t _event_)
    | Increments the event reference count. _event_ must be an event
      returned by enqueue_kernel or enqueue_marker or a user event.
| void *release_event*(clk_event_t _event_)
    | Decrements the event reference count.
      The event object is deleted once the event reference count is zero,
      the specific command identified by this event has completed (or
      terminated) and there are no commands in any device command queue that
      require a wait for this event to complete.

      _event_ must be an event returned by enqueue_kernel, enqueue_marker or
      a user event.
| |
| clk_event_t *create_user_event*()
    | Create a user event.
      Returns the user event.
      The execution status of the user event created is set to
      `CL_SUBMITTED`.
| bool *is_valid_event*(clk_event_t _event_)
    | Returns _true_ if _event_ is a valid event.
      Otherwise returns _false_.
| void *set_user_event_status*(clk_event_t _event_, int _status_)
    | Sets the execution status of a user event.
      _event_ must be a user-event.
      _status_ can be either `CL_COMPLETE` or a negative integer value
      indicating an error.
| |
| void *capture_event_profiling_info*(clk_event_t _event_,
  clk_profiling_info _name_, global void *_value_)
   a| Captures the profiling information for functions that are enqueued as
      commands.
      The specific function being referred to is: enqueue_kernel.
      These enqueued commands are identified by unique event objects.
      The profiling information will be available in _value_ once the
      command identified by _event_ has completed.

_event_ must be an event returned by enqueue_kernel.

_name_ identifies which profiling information is to be queried and can be:

`CLK_PROFILING_COMMAND_EXEC_TIME`

_value_ is a pointer to two 64-bit values.

The first 64-bit value describes the elapsed time `CL_PROFILING_COMMAND_END`
- `CL_PROFLING_COMMAND_START` for the command identified by _event_ in
nanoseconds.

The second 64-bit value describes the elapsed time
`CL_PROFILING_COMMAND_COMPLETE` - `CL_PROFILING_COMAMND_START` for the
command identified by _event_ in nanoseconds.

[NOTE]
====
The behavior of capture_event_profiling_info when called multiple times for
the same _event_ is undefined.
====
|====

Events can be used to identify commands enqueued to a command-queue from the
host.
These events created by the OpenCL runtime can only be used on the host,
i.e. as events passed in the _event_wait_list_ argument to various
*clEnqueue* APIs or runtime APIs that take events as arguments, such as
*clRetainEvent*, *clReleaseEvent*, and *clGetEventProfilingInfo*.

Similarly, events can be used to identify commands enqueued to a device
queue (from a kernel).
These event objects cannot be passed to the host or used by OpenCL runtime
APIs such as the *clEnqueue* APIs or runtime APIs that take event arguments.

*clRetainEvent* and *clReleaseEvent* will return `CL_INVALID_OPERATION` if
_event_ specified is an event that refers to any kernel enqueued to a device
queue using *enqueue_kernel* or *enqueue_marker*, or is a user event created
by *create_user_event*.

Similarly, *clSetUserEventStatus* can only be used to set the execution
status of events created using *clCreateUserEvent*.
User events created on the device can be set using set_user_event_status
built-in function.

The example below shows how events can be used with kernels enqueued to
multiple device queues.

[source,c]
----------
extern void barA_kernel(...);
extern void barB_kernel(...);

kernel void
foo(queue_t q0, queue q1, ...)
{
    ...
    clk_event_t evt0;

    // enqueue kernel to queue q0
    enqueue_kernel(q0,
                   CLK_ENQUEUE_FLAGS_NO_WAIT,
                   ndrange_A,
                   0, NULL, &evt0,
                   ^{barA_kernel(...);} );

    // enqueue kernel to queue q1
    enqueue_kernel(q1,
                   CLK_ENQUEUE_FLAGS_NO_WAIT,
                   ndrange_B,
                   1, &evt0, NULL,
                   ^{barB_kernel(...);} );

    // release event evt0. This will get released
    // after barA_kernel enqueued in queue q0 has finished
    // execution and barB_kernel enqueued in queue q1 and
    // waits for evt0 is submitted for execution, i.e. wait
    // for evt0 is satisfied.
    release_event(evt0);

}
----------

The example below shows how the marker command can be used with kernels
enqueued to a device queue.

[source,c]
----------
kernel void
foo(queue_t q, ...)
{
    ...
    clk_event_t marker_event;
    clk_event_t events[2];

    enqueue_kernel(q,
                   CLK_ENQUEUE_FLAGS_NO_WAIT,
                   ndrange,
                   0, NULL, &events[0],
                   ^{barA_kernel(...);} );

    enqueue_kernel(q,
                   CLK_ENQUEUE_FLAGS_NO_WAIT,
                   ndrange,
                   0, NULL, &events[1],
                   ^{barB_kernel(...);} );

    // barA_kernel and barB_kernel can be executed
    // out of order. we need to wait for both these
    // kernels to finish execution before barC_kernel
    // starts execution so we enqueue a marker command and
    // then enqueue barC_kernel that waits on the event
    // associated with the marker.
    enqueue_marker(q, 2, events, &marker_event);

    enqueue_kernel(q,
                   CLK_ENQUEUE_FLAGS_NO_WAIT,
                   1, &marker_event, NULL,
                   ^{barC_kernel(...);} );

    release_event(events[0];
    release_event(events[1]);
    release_event(marker_event);
}
----------
--


[[built-in-functions-helper-functions]]
==== Built-in Functions - Helper Functions

[open,refpage='helperFunctions',desc='Built-in Helper Functions',type='freeform',spec='clang',anchor='built-in-functions-helper-functions',xrefs='',alias='get_default_queue ndrange ndrange_1D ndrange_2D ndrange_3D']
--

[[table-builtin-helper]]
.Built-in Helper Functions
[cols=",",]
|====
| *Built-in Function* | *Description*
| queue_t *get_default_queue*(void)
    | Returns the default device queue.
      If a default device queue has not been created, `CLK_NULL_QUEUE` is
      returned.
| |
| ndrange_t *ndrange_1D*(size_t _global_work_size_) +
  ndrange_t *ndrange_1D*(size_t _global_work_size_,
  size_t _local_work_size_) +
  ndrange_t *ndrange_1D*(size_t _global_work_offset_,
  size_t _global_work_size_, size_t _local_work_size_) +
  ndrange_t *ndrange_2D*(const size_t _global_work_size_[2]) +
  ndrange_t *ndrange_2D*(const size_t _global_work_size_[2],
  const size_t _local_work_size_[2]) +
  ndrange_t *ndrange_2D*(const size_t _global_work_offset_[2],
  const size_t _global_work_size_[2],
  const size_t _local_work_size_[2]) +
  ndrange_t *ndrange_3D*(const size_t _global_work_size_[3]) +
  ndrange_t *ndrange_3D*(const size_t _global_work_size_[3],
  const size_t _local_work_size_[3]) +
  ndrange_t *ndrange_3D*(const size_t _global_work_offset_[3],
  const size_t _global_work_size_[3],
  const size_t _local_work_size_[3])
    | Builds a 1D, 2D or 3D ND-range descriptor.
|====
--

[[subgroup-functions]]
=== Subgroup Functions

[open,refpage='subgroupFunctions',desc='Subgroup Functions',type='freeform',spec='clang',anchor='subgroup-functions',xrefs='',alias='sub_group_all sub_group_any sub_group_broadcast sub_group_reduce sub_group_scan_exclusive sub_group_scan_inclusive sub_group_reserve_read_pipe sub_gorup_reserve_write_pipe sub_group_commit_read_pipe sub_group_commit_write_pipe get_kernel_sub_group_count_for_ndrange get_kernel_max_sub_group_size_for_ndrange']
--

NOTE: The functionality described in this section <<unified-spec, requires>>
support for OpenCL C 3.0 or newer and the `+__opencl_c_subgroups+` feature.

The table below describes OpenCL C programming language built-in functions that operate on a subgroup level.
These built-in functions must be encountered by all work-items in the subgroup executing the kernel.
For the functions below, the generic type name `gentype` may be the one of the
supported built-in scalar data types `int`, `uint`, `long`
footnote:[{fn-int64-supported}], `ulong`, `half` footnote:[{fn-half-supported}],
`float`, and `double` footnote:[{fn-double-supported}].

.Built-in Subgroup Collective Functions
[cols=",",options="header",]
|====
| *Function*
| *Description*

| int *sub_group_all* (int _predicate_)
| Evaluates _predicate_ for all work-items in the subgroup and returns a
  non-zero value if _predicate_ evaluates to non-zero for all work-items in
  the subgroup.

| int *sub_group_any* (int _predicate_)
| Evaluates _predicate_ for all work-items in the subgroup and returns a
  non-zero value if _predicate_ evaluates to non-zero for any work-items in
  the subgroup.

| gentype *sub_group_broadcast* ( +
  gentype _x_, uint _sub_group_local_id_)
| Broadcast the value of _x_ for work-item identified by
  _sub_group_local_id_ (value returned by *get_sub_group_local_id*) to all
  work-items in the subgroup.

  _sub_group_local_id_ must be the same value for all work-items in the
  subgroup.

| gentype *sub_group_reduce_<op>* ( +
  gentype _x_)
| Return result of reduction operation specified by *<op>* for all values of
  _x_ specified by work-items in a subgroup.

| gentype *sub_group_scan_exclusive_<op>* ( +
  gentype _x_)
| Do an exclusive scan operation specified by *<op>* of all values specified
  by work-items in a subgroup.
  The scan results are returned for each work-item.

  The scan order is defined by increasing subgroup local ID within the
  subgroup.

| gentype *sub_group_scan_inclusive_<op>* ( +
  gentype _x_)
| Do an inclusive scan operation specified by *<op>* of all values specified
  by work-items in a subgroup.
  The scan results are returned for each work-item.

  The scan order is defined by increasing subgroup local ID within the
  subgroup.

|====

The *<op>* in *sub_group_reduce_<op>*, *sub_group_scan_inclusive_<op>* and *sub_group_scan_exclusive_<op>* defines the operator and can be *add*, *min* or *max*.

The exclusive scan operation takes a binary operator *op* with an identity I and _n_ (where _n_ is the size of the sub-group) elements [a~0~, a~1~, ... a~n-1~] and returns [I, a~0~, (a~0~ *op* a~1~), ... (a~0~ *op* a~1~ *op* ... *op* a~n-2~)].

The inclusive scan operation takes a binary operator *op* with an identity I and _n_ (where _n_ is the size of the sub-group) elements [a~0~, a~1~, ... a~n-1~] and returns [a~0~, (a~0~ *op* a~1~), ... (a~0~ *op* a~1~ *op* ... *op* a~n-1~)].

If *op* = *add*, the identity I is 0.
If *op* = *min*, the identity I is `INT_MAX`, `UINT_MAX`, `LONG_MAX`, `ULONG_MAX`, for `int`, `uint`, `long`, `ulong` types and is `+INF` for
floating-point types.
Similarly if *op* = max, the identity I is `INT_MIN`, 0, `LONG_MIN`, 0 and `-INF`.

[NOTE]
====
The order of floating-point operations is not guaranteed for the *sub_group_reduce_<op>*, *sub_group_scan_inclusive_<op>* and *sub_group_scan_exclusive_<op>* built-in functions that operate on `half`, `float` and `double` data types.
The order of these floating-point operations is also non-deterministic for a given sub-group.
====

NOTE: The functionality described in the following table <<unified-spec,
requires>> support for OpenCL C 3.0 or newer and the `+__opencl_c_subgroups+`
and `+__opencl_c_pipes+` features.

The following table describes built-in pipe functions that operate at a
subgroup level.
These built-in functions must be encountered by all work-items in a subgroup
executing the kernel with the same argument values, otherwise the behavior
is undefined.
We use the generic type name `gentype` to indicate the built-in OpenCL C
scalar or vector integer or floating-point data types or any user defined
type built from these scalar and vector data types can be used as the type
for the arguments to the pipe functions listed in _table 6.29_.

.Built-in Subgroup Pipe Functions
[cols=",",options="header",]
|====
| *Function*
| *Description*

| reserve_id_t *sub_group_reserve_read_pipe* ( +
  read_only pipe gentype _pipe_, +
  uint _num_packets_)

  reserve_id_t *sub_group_reserve_write_pipe* ( +
  write_only pipe gentype _pipe_, +
  uint _num_packets_)
| Reserve _num_packets_ entries for reading from or writing to _pipe_.
  Returns a valid non-zero reservation ID if the reservation is successful
  and 0 otherwise.

  The reserved pipe entries are referred to by indices that go from 0 ...
  _num_packets_ - 1.

| void *sub_group_commit_read_pipe* ( +
  read_only pipe gentype _pipe_, +
  reserve_id_t _reserve_id_)

  void *sub_group_commit_write_pipe* ( +
  write_only pipe gentype _pipe_, +
  reserve_id_t _reserve_id_)
| Indicates that all reads and writes to _num_packets_ associated with
  reservation _reserve_id_ are completed.

|====

Note: Reservations made by a subgroup are ordered in the pipe as they are
ordered in the program.
Reservations made by different subgroups that belong to the same work-group
can be ordered using subgroup synchronization.
The order of subgroup based reservations that belong to different work
groups is implementation defined.

NOTE: The functionality described in the following table <<unified-spec,
requires>> support for OpenCL C 3.0 or newer and the `+__opencl_c_subgroups+`
and `+__opencl_c_device_enqueue+` features.

The following table describes built-in functions to query subgroup
information for a block to be enqueued.

.Built-in Subgroup Kernel Query Functions
[cols="5,4",options="header",]
|====
| *Built-in Function*
| *Description*

| uint *get_kernel_sub_group_count_for_ndrange* ( +
  const ndrange_t _ndrange_, +
  void (^block)(void));

  uint *get_kernel_sub_group_count_for_ndrange* ( +
  const ndrange_t _ndrange_, +
  void (^block)(local void *, ...));
| Returns the number of subgroups in each work-group of the dispatch (except
  for the last in cases where the global size does not divide cleanly into
  work-groups) given the combination of the passed ndrange and block.

  _block_ specifies the block to be enqueued.

| uint *get_kernel_max_sub_group_size_for_ndrange* ( +
  const ndrange_t _ndrange_, +
  void (^block)(void)); +

  uint *get_kernel_max_sub_group_size_for_ndrange* ( +
  const ndrange_t _ndrange_, +
  void (^block)(local void *, ...));
| Returns the maximum subgroup size for a block.

|====
--

[[opencl-numerical-compliance]]
= OpenCL Numerical Compliance

This section describes features of the <<C99-spec,C99>> and IEEE 754
standards that must be supported by all OpenCL compliant devices.

This section describes the functionality that must be supported by all
OpenCL devices for single precision floating-point numbers.
Currently, only single precision floating-point is a requirement.
Double precision floating-point is an optional feature.


[[rounding-modes-1]]
== Rounding Modes

Floating-point calculations may be carried out internally with extra
precision and then rounded to fit into the destination type.
IEEE 754 defines four possible rounding modes:

  * Round to nearest even
  * Round toward +{inf}
  * Round toward -{inf}
  * Round toward zero

_Round to nearest_ _even_ is currently the only rounding mode required by the
OpenCL specification for single precision and double precision operations and is
therefore the default rounding mode
footnote:[{fn-float-required-rounding-mode}].
In addition, only static selection of rounding mode is supported.
Dynamically reconfiguring the rounding modes as specified by the IEEE 754
spec is unsupported.


[[inf-nan-and-denormalized-numbers]]
== INF, NaN and Denormalized Numbers

`INF` and NaNs must be supported.
Support for signaling NaNs is not required.

Support for denormalized numbers with single precision floating-point is
optional.
Denormalized single precision floating-point numbers passed as input or
produced as the output of single precision floating-point operations such as
add, sub, mul, divide, and the functions defined in <<math-functions,math
functions>>, <<common-functions,common functions>>, and
<<geometric-functions,geometric functions>> may be flushed to zero.


[[floating-point-exceptions]]
== Floating-Point Exceptions

Floating-point exceptions are disabled in OpenCL.
The result of a floating-point exception must match the IEEE 754 spec for
the exceptions not enabled case.
Whether and when the implementation sets floating-point flags or raises
floating-point exceptions is implementation-defined.
This standard provides no method for querying, clearing or setting
floating-point flags or trapping raised exceptions.
Due to non-performance, non-portability of trap mechanisms and the
impracticality of servicing precise exceptions in a vector context
(especially on heterogeneous hardware), such features are discouraged.

Implementations that nevertheless support such operations through an
extension to the standard shall initialize with all exception flags cleared
and the exception masks set so that exceptions raised by arithmetic
operations do not trigger a trap to be taken.
If the underlying work is reused by the implementation, the implementation
is however not responsible for reclearing the flags or resetting exception
masks to default values before entering the kernel.
That is to say that kernels that do not inspect flags or enable traps are
licensed to expect that their arithmetic will not trigger a trap.
Those kernels that do examine flags or enable traps are responsible for
clearing flag state and disabling all traps before returning control to the
implementation.
Whether or when the underlying work-item (and accompanying global
floating-point state if any) is reused is implementation-defined.

The expressions *math_errorhandling* and `MATH_ERREXCEPT` are reserved for
use by this standard, but not defined.
Implementations that extend this specification with support for
floating-point exceptions shall define *math_errorhandling* and
`MATH_ERREXCEPT` per <<C99-spec, TC2 to the C99 Specification>>.


[[relative-error-as-ulps]]
== Relative Error as ULPs

In this section we discuss the maximum relative error defined as ulp (units
in the last place).
Addition, subtraction, multiplication, fused multiply-add and conversion
between integer and a single precision floating-point format are IEEE 754
compliant and are therefore correctly rounded.
Conversion between floating-point formats and
<<explicit-conversions,explicit conversions>> must be correctly rounded.

The ULP is defined as follows:

====
If _x_ is a real number that lies between two finite consecutive
floating-point numbers _a_ and _b_, without being equal to one of them, then
ulp(_x_) = |_b_ - _a_|, otherwise ulp(_x_) is the distance between the two
non-equal finite floating-point numbers nearest _x_.
Moreover, ulp(NaN) is NaN.
====

_Attribution: This definition was taken with consent from Jean-Michel Muller
with slight clarification for behavior at zero._

====
Jean-Michel Muller. On the definition of ulp(x). RR-5504, INRIA. 2005, pp.16. <inria-00070503>
Currently hosted at
https://hal.inria.fr/inria-00070503/document[https://hal.inria.fr/inria-00070503/document].
====

The following table describes the minimum accuracy of single precision
floating-point arithmetic operations given as ULP values.
The reference value used to compute the ULP value of an arithmetic operation
is the infinitely precise result.
0 ulp is used for math functions that do not require rounding.

[[table-ulp-float-math]]
.ULP values for single precision built-in math functions
[cols=",",]
|====
| *Function*            | *Min Accuracy - ULP values*
| _x_ + _y_             | Correctly rounded
| _x_ - _y_             | Correctly rounded
| _x_ * _y_             | Correctly rounded
| *1.0 / _x_*           | {leq} 2.5 ulp
| _x_ / _y_             | {leq} 2.5 ulp
| |
| *acos*                | {leq} 4 ulp
| *acospi*              | {leq} 5 ulp
| *asin*                | {leq} 4 ulp
| *asinpi*              | {leq} 5 ulp
| *atan*                | {leq} 5 ulp
| *atan2*               | {leq} 6 ulp
| *atanpi*              | {leq} 5 ulp
| *atan2pi*             | {leq} 6 ulp
| *acosh*               | {leq} 4 ulp
| *asinh*               | {leq} 4 ulp
| *atanh*               | {leq} 5 ulp
| *cbrt*                | {leq} 2 ulp
| *ceil*                | Correctly rounded
| *clamp*               | 0 ulp
| *copysign*            | 0 ulp
| *cos*                 | {leq} 4 ulp
| *cosh*                | {leq} 4 ulp
| *cospi*               | {leq} 4 ulp
// 3 operations from the 2 multiplications and 1 subtraction per component
| *cross*               | absolute error tolerance of 'max * max * (3 * FLT_EPSILON)' per vector component, where _max_ is the maximum input operand magnitude
| *degrees*             | {leq} 2 ulp
// 3           ULP error in sqrt
// 1.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// = 3 + (1.5 * n) + (0.5 * (n - 1))
// = 3 + 1.5n + (0.5n - 0.5)
// = 2.5 + 2n
| *distance*            | {leq} 2.5 + 2n ulp, for gentype with vector width _n_
// n + n-1  Number of operations from n multiples and (n-1) additions
// 2n - 1
| *dot*                 | absolute error tolerance of 'max * max * (2n - 1) * FLT_EPSILON', for vector width _n_ and maximum input operand magnitude _max_ across all vector components
| *erfc*                | {leq} 16 ulp
| *erf*                 | {leq} 16 ulp
| *exp*                 | {leq} 3 ulp
| *exp2*                | {leq} 3 ulp
| *exp10*               | {leq} 3 ulp
| *expm1*               | {leq} 3 ulp
| *fabs*                | 0 ulp
| *fdim*                | Correctly rounded
| *floor*               | Correctly rounded
| *fma*                 | Correctly rounded
| *fmax*                | 0 ulp
| *fmin*                | 0 ulp
| *fmod*                | 0 ulp
| *fract*               | Correctly rounded
| *frexp*               | 0 ulp
| *hypot*               | {leq} 4 ulp
| *ilogb*               | 0 ulp
// 3           ULP error in sqrt
// 0.5         effect on e of taking sqrt(x + e)
// 0.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// = (3 + 0.5 * ((0.5 * n) + (0.5 * (n - 1))))
// = 3 + 0.5 * (n - 0.5)
// = 2.75 + 0.5n
| *length*              | {leq} 2.75 + 0.5n ulp, for gentype with vector width _n_
| *ldexp*               | Correctly rounded
| *lgamma*              | Undefined
| *lgamma_r*            | Undefined
| *log*                 | {leq} 3 ulp
| *log2*                | {leq} 3 ulp
| *log10*               | {leq} 3 ulp
| *log1p*               | {leq} 2 ulp
| *logb*                | 0 ulp
| *mad*                 | Implemented either as a correctly rounded fma or
                          as a multiply followed by an add both of which are
                          correctly rounded
| *max*                 | 0 ulp
| *maxmag*              | 0 ulp
| *min*                 | 0 ulp
| *minmag*              | 0 ulp
| *mix*                 | absolute error tolerance of 1e-3
| *modf*                | 0 ulp
| *nan*                 | 0 ulp
| *nextafter*           | 0 ulp
// 2.5         error in rsqrt + error in multiply
// 0.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// = 2.5 + (0.5 * n) + (0.5 * (n - 1))
// = 2.5 + 0.5n + (0.5n - 0.5)
// = 2.0 + n
| *normalize*           | {leq} 2 + n ulp, for gentype with vector width _n_
| *pow*(_x_, _y_)       | {leq} 16 ulp
| *pown*(_x_, _y_)      | {leq} 16 ulp
| *powr*(_x_, _y_)      | {leq} 16 ulp
| *radians*             | {leq} 2 ulp
| *remainder*           | 0 ulp
| *remquo*              | 0 ulp
| *rint*                | Correctly rounded
| *rootn*               | {leq} 16 ulp
| *round*               | Correctly rounded
| *rsqrt*               | {leq} 2 ulp
| *sign*                | 0 ulp
| *sin*                 | {leq} 4 ulp
| *sincos*              | {leq} 4 ulp for sine and cosine values
| *sinh*                | {leq} 4 ulp
| *sinpi*               | {leq} 4 ulp
| *smoothstep*          | absolute error tolerance of 1e-5
| *sqrt*                | {leq} 3 ulp
| *step*                | 0 ulp
| *tan*                 | {leq} 5 ulp
| *tanh*                | {leq} 5 ulp
| *tanpi*               | {leq} 6 ulp
| *tgamma*              | {leq} 16 ulp
| *trunc*               | Correctly rounded
| |
| *half_cos*            | {leq} 8192 ulp
| *half_divide*         | {leq} 8192 ulp
| *half_exp*            | {leq} 8192 ulp
| *half_exp2*           | {leq} 8192 ulp
| *half_exp10*          | {leq} 8192 ulp
| *half_log*            | {leq} 8192 ulp
| *half_log2*           | {leq} 8192 ulp
| *half_log10*          | {leq} 8192 ulp
| *half_powr*           | {leq} 8192 ulp
| *half_recip*          | {leq} 8192 ulp
| *half_rsqrt*          | {leq} 8192 ulp
| *half_sin*            | {leq} 8192 ulp
| *half_sqrt*           | {leq} 8192 ulp
| *half_tan*            | {leq} 8192 ulp
| |

// 8192        ULP error in half_sqrt
// 1.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// = 8192 + (1.5 * n) + (0.5 * (n - 1))
// = 8192 + 1.5n + (0.5n - 0.5)
// = 8191.5 + 2n
| *fast_distance*       | {leq} 8191.5 + 2n ulp, for gentype with vector width _n_

// 8192        ULP error in half_sqrt
// 0.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// = 8192 + (0.5 * n) + (0.5 * (n - 1))
// = 8192 + 0.5n + (0.5n - 0.5)
// = 8191.5 + n
| *fast_length*         | {leq} 8191.5 + n ulp, for gentype with vector width _n_

// 8192.5      error in half_rsqrt + error in multiply
// 0.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// = 8192.5 + (0.5 * n) + (0.5 * (n - 1))
// = 8192.5 + 0.5n + (0.5n - 0.5)
// = 8192 + n
| *fast_normalize*      | {leq} 8192 + n ulp, for gentype with vector width _n_
| |
| *native_cos*          | Implementation-defined
| *native_divide*       | Implementation-defined
| *native_exp*          | Implementation-defined
| *native_exp2*         | Implementation-defined
| *native_exp10*        | Implementation-defined
| *native_log*          | Implementation-defined
| *native_log2*         | Implementation-defined
| *native_log10*        | Implementation-defined
| *native_powr*         | Implementation-defined
| *native_recip*        | Implementation-defined
| *native_rsqrt*        | Implementation-defined
| *native_sin*          | Implementation-defined
| *native_sqrt*         | Implementation-defined
| *native_tan*          | Implementation-defined
|====

The following table describes the minimum accuracy of single precision
floating-point arithmetic operations given as ULP values for the embedded
profile.
The reference value used to compute the ULP value of an arithmetic operation
is the infinitely precise result.
0 ulp is used for math functions that do not require rounding.

[[table-ulp-embedded]]
.ULP values for the embedded profile
[cols=",",]
|====
| *Function*        | *Min Accuracy - ULP values*
| _x_ + _y_         | Correctly rounded
| _x_ - _y_         | Correctly rounded
| _x_ * _y_         | Correctly rounded
| *1.0 / _x_*       | {leq} 3 ulp
| _x_ / _y_         | {leq} 3 ulp
| |
| *acos*            | {leq} 4 ulp
| *acospi*          | {leq} 5 ulp
| *asin*            | {leq} 4 ulp
| *asinpi*          | {leq} 5 ulp
| *atan*            | {leq} 5 ulp
| *atan2*           | {leq} 6 ulp
| *atanpi*          | {leq} 5 ulp
| *atan2pi*         | {leq} 6 ulp
| *acosh*           | {leq} 4 ulp
| *asinh*           | {leq} 4 ulp
| *atanh*           | {leq} 5 ulp
| *cbrt*            | {leq} 4 ulp
| *ceil*            | Correctly rounded
| *clamp*           | 0 ulp
| *copysign*        | 0 ulp
| *cos*             | {leq} 4 ulp
| *cosh*            | {leq} 4 ulp
| *cospi*           | {leq} 4 ulp
| *cross*           | Implementation-defined
| *degrees*         | {leq} 2 ulp
| *distance*        | Implementation-defined
| *dot*             | Implementation-defined
| *erfc*            | {leq} 16 ulp
| *erf*             | {leq} 16 ulp
| *exp*             | {leq} 4 ulp
| *exp2*            | {leq} 4 ulp
| *exp10*           | {leq} 4 ulp
| *expm1*           | {leq} 4 ulp
| *fabs*            | 0 ulp
| *fdim*            | Correctly rounded
| *floor*           | Correctly rounded
| *fma*             | Correctly rounded
| *fmax*            | 0 ulp
| *fmin*            | 0 ulp
| *fmod*            | 0 ulp
| *fract*           | Correctly rounded
| *frexp*           | 0 ulp
| *hypot*           | {leq} 4 ulp
| *ilogb*           | 0 ulp
| *ldexp*           | Correctly rounded
| *length*          | Implementation-defined
| *log*             | {leq} 4 ulp
| *log2*            | {leq} 4 ulp
| *log10*           | {leq} 4 ulp
| *log1p*           | {leq} 4 ulp
| *logb*            | 0 ulp
| *mad*             | Any value allowed (infinite ulp)
| *max*             | 0 ulp
| *maxmag*          | 0 ulp
| *min*             | 0 ulp
| *minmag*          | 0 ulp
| *mix*             | Implementation-defined
| *modf*            | 0 ulp
| *nan*             | 0 ulp
| *normalize*       | Implementation-defined
| *nextafter*       | 0 ulp
| *pow*(_x_, _y_)   | {leq} 16 ulp
| *pown*(_x_, _y_)  | {leq} 16 ulp
| *powr*(_x_, _y_)  | {leq} 16 ulp
| *radians*         | {leq} 2 ulp
| *remainder*       | 0 ulp
| *remquo*          | 0 ulp
| *rint*            | Correctly rounded
| *rootn*           | {leq} 16 ulp
| *round*           | Correctly rounded
| *rsqrt*           | {leq} 4 ulp
| *sign*            | 0 ulp
| *sin*             | {leq} 4 ulp
| *sincos*          | {leq} 4 ulp for sine and cosine values
| *sinh*            | {leq} 4 ulp
| *sinpi*           | {leq} 4 ulp
| *smoothstep*      | Implementation-defined
| *sqrt*            | {leq} 4 ulp
| *step*            | 0 ulp
| *tan*             | {leq} 5 ulp
| *tanh*            | {leq} 5 ulp
| *tanpi*           | {leq} 6 ulp
| *tgamma*          | {leq} 16 ulp
| *trunc*           | Correctly rounded
| |
| *half_cos*        | {leq} 8192 ulp
| *half_divide*     | {leq} 8192 ulp
| *half_exp*        | {leq} 8192 ulp
| *half_exp2*       | {leq} 8192 ulp
| *half_exp10*      | {leq} 8192 ulp
| *half_log*        | {leq} 8192 ulp
| *half_log2*       | {leq} 8192 ulp
| *half_log10*      | {leq} 8192 ulp
| *half_powr*       | {leq} 8192 ulp
| *half_recip*      | {leq} 8192 ulp
| *half_rsqrt*      | {leq} 8192 ulp
| *half_sin*        | {leq} 8192 ulp
| *half_sqrt*       | {leq} 8192 ulp
| *half_tan*        | {leq} 8192 ulp
| |
| *fast_distance*   | Implementation-defined
| *fast_length*     | Implementation-defined
| *fast_normalize*  | Implementation-defined
| |
| *native_cos*      | Implementation-defined
| *native_divide*   | Implementation-defined
| *native_exp*      | Implementation-defined
| *native_exp2*     | Implementation-defined
| *native_exp10*    | Implementation-defined
| *native_log*      | Implementation-defined
| *native_log2*     | Implementation-defined
| *native_log10*    | Implementation-defined
| *native_powr*     | Implementation-defined
| *native_recip*    | Implementation-defined
| *native_rsqrt*    | Implementation-defined
| *native_sin*      | Implementation-defined
| *native_sqrt*     | Implementation-defined
| *native_tan*      | Implementation-defined
|====

The <<table-float-ulp-relaxed,following table>> describes the minimum accuracy
of commonly used single precision floating-point arithmetic operations given
as ULP values if the `-cl-unsafe-math-optimizations` compiler option is
specified when compiling or building an OpenCL program.
For derived implementations, the operations used in the derivation may
themselves be relaxed according to the following table.
The minimum accuracy of math functions not defined in the following table
when the `-cl-unsafe-math-optimizations` compiler option is specified is as defined
in <<table-ulp-float-math>> when operating in the full profile, and as
defined in <<table-ulp-embedded>> when operating in the embedded profile.
The reference value used to compute the ULP value of an arithmetic operation
is the infinitely precise result.
0 ulp is used for math functions that do not require rounding.

Defined minimum accuracy of single precision floating-point arithmetic
operations and builtins with `-cl-unsafe-math-optimizations` <<unified-spec,
requires>> support for OpenCL C 2.0 or newer.

[[table-float-ulp-relaxed]]
.ULP values for single precision built-in math functions with unsafe math optimizations in the full and embedded profiles
[cols=",",]
|====
| *Function* | *Min Accuracy - ULP values*
| *1.0 / _x_*
    | {leq} 2.5 ulp for _x_ in the domain of 2^-126^ to 2^126^ for the full
      profile, and {leq} 3 ulp for the embedded profile.
| _x_ / _y_
    | {leq} 2.5 ulp for _x_ in the domain of 2^-62^ to 2^62^ and _y_ in the
      domain of 2^-62^ to 2^62^ for the full profile, and {leq} 3 ulp for
      the embedded profile.
| *acos*(_x_)
    | {leq} 4096 ulp
| *acospi*(_x_)
    | Implemented as *acos*(_x_) * `M_PI_F`.
      For non-derived implementations, the error is {leq} 8192 ulp.
| *asin*(_x_)
    | {leq} 4096 ulp
| *asinpi*(_x_)
    | Implemented as *asin*(_x_) * `M_PI_F`.
      For non-derived implementations, the error is {leq} 8192 ulp.
| *atan*(_x_)
    | {leq} 4096 ulp
| *atan2*(_y_, _x_)
    | Implemented as *atan*(_y_ / _x_) for _x_ > 0, *atan*(_y_ / _x_) +
      `M_1_PI_F` for _x_ < 0 and _y_ > 0 and *atan*(_y_ / _x_) -
      `M_1_PI_F` for _x_ < 0 and _y_ < 0.
| *atanpi*(_x_)
    | Implemented as *atan*(_x_) * `M_1_PI_F`.
      For non-derived implementations, the error is {leq} 8192 ulp.
| *atan2pi*(_y_, _x_)
    | Implemented as *atan2*(_y_, _x_) * `M_PI_F`.
      For non-derived implementations, the error is {leq} 8192 ulp.
| *acosh*(_x_)
    | Implemented as *log*(_x_ + *sqrt*(_x_ * _x_ - 1)).
| *asinh*(_x_)
    | Implemented as *log*(_x_ + *sqrt*(_x_ * _x_ + 1)).
| *cbrt*(_x_)
    | Implemented as *rootn*(_x_, 3).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *cos*(_x_)
    | For _x_ in the domain [-{pi}, {pi}], the maximum absolute error
      is {leq} 2^-11^ and larger otherwise.
| *cosh*(_x_)
    | Defined for _x_ in the domain [-88,88] and implemented as 0.5f *
      (*exp*(_x_) + *exp*(-_x_)).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *cospi*(_x_)
    | For _x_ in the domain [-1, 1], the maximum absolute error is {leq}
      2^-11^ and larger otherwise.
| *exp*(_x_)
    | {leq} 3 + *floor*(*fabs*(2 * _x_)) ulp for the full profile, and {leq}
      4 ulp for the embedded profile.
| *exp2*(_x_)
    | {leq} 3 + *floor*(*fabs*(2 * _x_)) ulp for the full profile, and {leq}
      4 ulp for the embedded profile.
| *exp10*(_x_)
    | Derived implementations implement this as *exp2*(_x_ * *log2*(10)).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *expm1*(_x_)
    | Derived implementations implement this as *exp*(_x_) - 1.
      For non-derived implementations, the error is {leq} 8192 ulp.
| *log*(_x_)
    | For _x_ in the domain [0.5, 2] the maximum absolute error is {leq}
      2^-21^; otherwise the maximum error is {leq}3 ulp for the full profile
      and {leq} 4 ulp for the embedded profile
| *log2*(_x_)
    | For _x_ in the domain [0.5, 2] the maximum absolute error is {leq}
      2^-21^; otherwise the maximum error is {leq}3 ulp for the full profile
      and {leq} 4 ulp for the embedded profile
| *log10*(_x_)
    | For _x_ in the domain [0.5, 2] the maximum absolute error is {leq}
      2^-21^; otherwise the maximum error is {leq}3 ulp for the full profile
      and {leq} 4 ulp for the embedded profile
| *log1p*(_x_)
    | Derived implementations implement this as *log*(_x_ + 1).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *pow*(_x_, _y_)
    | Undefined for _x_ = 0 and _y_ = 0.
      Undefined for _x_ < 0 and non-integer y.
      Undefined for _x_ < 0 and _y_ outside the domain [-2^24, 2^24].
      For _x_ > 0 or _x_ < 0 and even _y_, derived implementations implement
      this as *exp2*(_y_ * *log2*(*fabs*(_x_))).
      For _x_ < 0 and odd _y_, derived implementations implement this as
      -*exp2*(_y_ * *log2*(*fabs*(_x_)).
      For _x_ == 0 and nonzero _y_, derived implementations return zero.
      For non-derived implementations, the error is {leq} 8192 ulp.
      footnote:[{fn-pow-performance}]
| *pown*(_x_, _y_)
    | Defined only for integer values of y.
      Undefined for _x_ = 0 and _y_ = 0.
      For _x_ >= 0 or _x_ < 0 and even _y_, derived implementations
      implement this as *exp2*(_y_ * *log2*(*fabs*(_x_))).
      For _x_ < 0 and odd _y_, derived implementations implement this as
      -*exp2*(_y_ * *log2*(*fabs*(_x_)).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *powr*(_x_, _y_)
    | Defined only for _x_ >= 0.
      Undefined for _x_ = 0 and _y_ = 0.
      Derived implementations implement this as *exp2*(_y_ * *log2*(_x_)).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *rootn*(_x_, _y_)
    | Defined for _x_ > 0 when _y_ is nonzero, derived implementations
      implement this case as *exp2*(log2(_x_) / _y_).
      Defined for _x_ < 0 when _y_ is odd, derived implementations implement
      this case as -*exp2*(*log2*(-_x_) / _y_).
      Defined for _x_ = +/-0 when _y_ > 0, derived implementations will
      return +0 in this case.
      For non-derived implementations, the error is {leq} 8192 ulp.
| *sin*(_x_)
    | For _x_ in the domain [-{pi}, {pi}], the maximum absolute error is
      {leq} 2^-11^ and larger otherwise.
| *sincos*(_x_)
    | ulp values as defined for *sin*(_x_) and *cos*(_x_)
| *sinh*(_x_)
    | Defined for _x_ in the domain [-88,88].
      For _x_ in [-2^-10,2^-10], derived implementations implement as _x_.
      For _x_ outside of [-2^10,2^10], derived implement as *0.5f *
      (*exp*(_x_) - *exp*(-_x_)).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *sinpi*(_x_)
    | For _x_ in the domain [-1, 1], the maximum absolute error is {leq}
      2^-11^ and larger otherwise.
| *tan*(_x_)
    | Derived implementations implement this as *sin*(_x_) * (`1.0f` /
      *cos*(_x_)).
      For non-derived implementations, the error is {leq} 8192 ulp.
| *tanpi*(_x_)
    | Derived implementations implement this as *tan*(_x_ * `M_PI_F`).
      For non-derived implementations, the error is {leq} 8192 ulp for _x_
      in the domain [-1, 1].
| _x_ * _y_ + _z_
    | Implemented either as a correctly rounded *fma* or as a multiply and
      an add both of which are correctly rounded.
|====

The following table describes the minimum accuracy of double precision
floating-point arithmetic operations given as ULP values.
The reference value used to compute the ULP value of an arithmetic operation
is the infinitely precise result.
0 ulp is used for math functions that do not require rounding.

[[table-ulp-double]]
.ULP values for double precision built-in math functions
[cols=",",]
|====
| *Function*        | *Min Accuracy - ULP values*
| _x_ + _y_         | Correctly rounded
| _x_ - _y_         | Correctly rounded
| _x_ * _y_         | Correctly rounded
| 1.0 / _x_         | Correctly rounded
| _x_ / _y_         | Correctly rounded
| |
| *acos*            | {leq} 4 ulp
| *acospi*          | {leq} 5 ulp
| *asin*            | {leq} 4 ulp
| *asinpi*          | {leq} 5 ulp
| *atan*            | {leq} 5 ulp
| *atan2*           | {leq} 6 ulp
| *atanpi*          | {leq} 5 ulp
| *atan2pi*         | {leq} 6 ulp
| *acosh*           | {leq} 4 ulp
| *asinh*           | {leq} 4 ulp
| *atanh*           | {leq} 5 ulp
| *cbrt*            | {leq} 2 ulp
| *ceil*            | Correctly rounded
| *clamp*           | 0 ulp
| *copysign*        | 0 ulp
| *cos*             | {leq} 4 ulp
| *cosh*            | {leq} 4 ulp
| *cospi*           | {leq} 4 ulp
// 3 operations from the 2 multiplications and 1 subtraction per component
| *cross*           | absolute error tolerance of 'max * max * (3 * FLT_EPSILON)' per vector component, where _max_ is the maximum input operand magnitude
| *degrees*         | {leq} 2 ulp
// 3           ULP error in sqrt
// 0.5         effect on e of taking sqrt(x + e)
// 1.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// 2           accounts for error in reference code
//
// = 2 * (3 + 0.5 * ((1.5 * n) + (0.5 * (n - 1))))
// = 2 * (3 + 0.5 * (1.5n + (0.5n - 0.5)))
// = 2 * (3 + 0.5 * (2n - 0.5))
// = 2 * (3 + n - 0.25)
// = 2 * (2.75 + n)
// = 5.5 + 2n
| *distance*        | {leq} 5.5 + 2n ulp, for gentype with vector width _n_
// n + n-1  Number of operations from n multiples and (n-1) additions
// 2n - 1
| *dot*             | absolute error tolerance of 'max * max * (2n - 1) * FLT_EPSILON', for vector width _n_ and maximum input operand magnitude _max_ across all vector components
| *erfc*            | {leq} 16 ulp
| *erf*             | {leq} 16 ulp
| *exp*             | {leq} 3 ulp
| *exp2*            | {leq} 3 ulp
| *exp10*           | {leq} 3 ulp
| *expm1*           | {leq} 3 ulp
| *fabs*            | 0 ulp
| *fdim*            | Correctly rounded
| *floor*           | Correctly rounded
| *fma*             | Correctly rounded
| *fmax*            | 0 ulp
| *fmin*            | 0 ulp
| *fmod*            | 0 ulp
| *fract*           | Correctly rounded
| *frexp*           | 0 ulp
| *hypot*           | {leq} 4 ulp
| *ilogb*           | 0 ulp
// 3           ULP error in sqrt
// 0.5         effect on e of taking sqrt(x + e)
// 0.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// 2           accounts for error in reference code
//
// = 2 * (3 + 0.5 * ((0.5 * n) + (0.5 * (n - 1))))
// = 2 * (3 + 0.5 * (n - 0.5))
// = 2 * (2.75 + 0.5n)
// = 5.5 + n
| *length*          | {leq} 5.5 + n ulp, for gentype with vector width _n_
| *ldexp*           | Correctly rounded
| *log*             | {leq} 3 ulp
| *log2*            | {leq} 3 ulp
| *log10*           | {leq} 3 ulp
| *log1p*           | {leq} 2 ulp
| *logb*            | 0 ulp
| *mad*             | Any value allowed (infinite ulp)
| *max*             | 0 ulp
| *maxmag*          | 0 ulp
| *min*             | 0 ulp
| *minmag*          | 0 ulp
| *mix*             | Implementation-defined
| *modf*            | 0 ulp
| *nan*             | 0 ulp
| *nextafter*       | 0 ulp
// 2.5         error in rsqrt + error in multiply
// 0.5         effect on e of taking sqrt(x + e)
// 0.5 * n     cumulative error for multiplications
// 0.5 * (n-1) cumulative error for additions
//
// 2           accounts for error in reference code
//
// = 2 * (2.5 + 0.5 * ((0.5 * n) + (0.5 * (n - 1))))
// = 2 * (2.5 + 0.5 * (0.5n + (0.5n - 0.5)))
// = 2 * (2.5 + 0.5 * (n - 0.5))
// = 2 * (2.5 + 0.5n - 0.25)
// = 2 * (2.25 + 0.5n)
// = 4.5 + n
| *normalize*       | {leq} 4.5 + n ulp, for gentype with vector width _n_
| *pow*(_x_, _y_)   | {leq} 16 ulp
| *pown*(_x_, _y_)  | {leq} 16 ulp
| *powr*(_x_, _y_)  | {leq} 16 ulp
| *radians*         | {leq} 2 ulp
| *remainder*       | 0 ulp
| *remquo*          | 0 ulp
| *rint*            | Correctly rounded
| *rootn*           | {leq} 16 ulp
| *round*           | Correctly rounded
| *rsqrt*           | {leq} 2 ulp
| *sign*            | 0 ulp
| *sin*             | {leq} 4 ulp
| *sincos*          | {leq} 4 ulp for sine and cosine values
| *sinh*            | {leq} 4 ulp
| *sinpi*           | {leq} 4 ulp
| *smoothstep*      | Implementation-defined
| *step*            | 0 ulp
| *fsqrt*           | Correctly rounded
| *tan*             | {leq} 5 ulp
| *tanh*            | {leq} 5 ulp
| *tanpi*           | {leq} 6 ulp
| *tgamma*          | {leq} 16 ulp
| *trunc*           | Correctly rounded
|====


[[edge-case-behavior]]
== Edge Case Behavior

The edge case behavior of the <<math-functions,math functions>> shall
conform to <<C99-spec,sections F.9 and G.6 of the C99 Specification>>,
except <<additional-requirements-beyond-c99-tc2,where noted below>>.


[[additional-requirements-beyond-c99-tc2]]
=== Additional Requirements Beyond C99 TC2

All functions that return a NaN should return a quiet NaN.

*half_<funcname>* functions behave identically to the function of the same
name without the *half_* prefix.
They must conform to the same edge case requirements (<<C99-spec,see
sections F.9 and G.6 of the C99 Specification>>).
For other cases, except where otherwise noted, these single precision
functions are permitted to have up to 8192 ulps of error (as measured in the
single precision result), although better accuracy is encouraged.

The usual allowances for <<relative-error-as-ulps,rounding error>> or
<<edge-case-behavior-in-flush-to-zero-mode,flushing behavior>> shall not
apply for those values for which <<C99-spec,section F.9 of the C99
Specification>>, or the <<additional-requirements-beyond-c99-tc2,additional
requirements>> and <<edge-case-behavior-in-flush-to-zero-mode,edge case
behavior>> below (and similar sections for other floating-point precisions)
prescribe a result (e.g. *ceil*(-1 < _x_ < 0) returns -0).
Those values shall produce exactly the prescribed answers, and no other.
Where the {plusmn} symbol is used, the sign shall be preserved.
For example, *sin*({plusmn}0) = {plusmn}0 shall be interpreted to mean
*sin*(+0) is +0 and *sin*(-0) is -0.

[none]
* *acospi*(1) = +0.
* *acospi*(_x_) returns a NaN for |_x_| > 1.
* *asinpi*({plusmn}0) = {plusmn}0.
* *asinpi*(_x_) returns a NaN for |_x_| > 1.
* *atanpi*({plusmn}0) = {plusmn}0.
* *atanpi*({plusmn}{inf}) = {plusmn}0.5.
* *atan2pi*({plusmn}0, -0) = {plusmn}1.
* *atan2pi*({plusmn}0, +0) = {plusmn}0.
* *atan2pi*({plusmn}0, _x_) returns {plusmn}1 for _x_ < 0.
* *atan2pi*({plusmn}0, _x_) returns {plusmn}0 for _x_ > 0.
* *atan2pi*(_y_, {plusmn}0) returns -0.5 for _y_ < 0.
* *atan2pi*(_y_, {plusmn}0) returns 0.5 for _y_ > 0.
* *atan2pi*({plusmn}_y_, -{inf}) returns {plusmn}1 for finite _y_ > 0.
* *atan2pi*({plusmn}_y_, +{inf}) returns {plusmn}0 for finite _y_ > 0.
* *atan2pi*({plusmn}{inf}, _x_) returns {plusmn}0.5 for finite _x._
* *atan2pi*({plusmn}{inf}, -{inf}) returns {plusmn}0.75.
* *atan2pi*({plusmn}{inf}, +{inf}) returns {plusmn}0.25.
* *ceil*(-1 < _x_ < 0) returns -0.
* *cospi*({plusmn}0) returns 1
* *cospi*(_n_ + 0.5) is +0 for any integer _n_ where _n_ + 0.5 is
     representable.
* *cospi*({plusmn}{inf}) returns a NaN.
* *exp10*(-{inf}) returns +0.
* *exp10*(+{inf}) returns +{inf}.
* *distance*(_x_, _y_) calculates the distance from _x_ to _y_ without
     overflow or extraordinary precision loss due to underflow.
* *fdim*(any, NaN) returns NaN.
* *fdim*(NaN, any) returns NaN.
* *fmod*({plusmn}0, NaN) returns NaN.
* *frexp*({plusmn}{inf}, _exp_) returns {plusmn}{inf} and stores 0 in
     _exp_.
* *frexp*(NaN, _exp_) returns the NaN and stores 0 in _exp_.
* *fract*(_x_, _iptr_) shall not return a value greater than or equal to
     1.0, and shall not return a value less than 0.
* *fract*(+0, _iptr_) returns +0 and +0 in iptr.
* *fract*(-0, _iptr_) returns -0 and -0 in iptr.
* *fract*(+{inf}, _iptr_) returns +0 and +{inf} in _iptr_.
* *fract*(-{inf}, _iptr_) returns -0 and -{inf} in _iptr_.
* *fract*(NaN, _iptr_) returns the NaN and NaN in _iptr_.
* *length* calculates the length of a vector without overflow or
     extraordinary precision loss due to underflow.
* *lgamma_r*(_x_, _signp_) returns 0 in _signp_ if _x_ is zero or a
     negative integer.
* *nextafter*(-0, _y_ > 0) returns smallest positive denormal value.
* *nextafter*(+0, _y_ < 0) returns smallest negative denormal value.
* *normalize* shall reduce the vector to unit length, pointing in the
     same direction without overflow or extraordinary precision loss due to
     underflow.
* *normalize*(_v_) returns _v_ if all elements of _v_ are zero.
* *normalize*(_v_) returns a vector full of NaNs if any element is a NaN.
* *normalize*(_v_) for which any element in _v_ is infinite shall proceed
     as if the elements in _v_ were replaced as follows:
+
[source,c]
----------
for (i = 0; i < sizeof(v) / sizeof(v[0]); i++)
   v[i] = isinf(v[i]) ? copysign(1.0, v[i]) : 0.0 * v[i];
----------
* *pow*({plusmn}0, -{inf}) returns +{inf}
* *pown*(_x_, 0) is 1 for any _x_, even zero, NaN or infinity.
* *pown*({plusmn}0, _n_) is {plusmn}{inf} for odd _n_ < 0.
* *pown*({plusmn}0, _n_) is +{inf} for even _n_ < 0.
* *pown*({plusmn}0, _n_) is +0 for even _n_ > 0.
* *pown*({plusmn}0, _n_) is {plusmn}0 for odd _n_ > 0.
* *powr*(_x_, {plusmn}0) is 1 for finite _x_ > 0.
* *powr*({plusmn}0, _y_) is +{inf} for finite _y_ < 0.
* *powr*({plusmn}0, -{inf}) is +{inf}.
* *powr*({plusmn}0, _y_) is +0 for _y_ > 0.
* *powr*(+1, _y_) is 1 for finite _y._
* *powr*(_x_, _y_) returns NaN for _x_ < 0.
* *powr*({plusmn}0, {plusmn}0) returns NaN.
* *powr*(+{inf}, {plusmn}0) returns NaN.
* *powr*(+1, {plusmn}{inf}) returns NaN.
* *powr*(_x_, NaN) returns the NaN for _x_ >= 0.
* *powr*(NaN, _y_) returns the NaN.
* *rint*(-0.5 \<= _x_ < 0) returns -0.
* *remquo*(_x_, _y_, &_quo_) returns a NaN and 0 in _quo_ if _x_ is
     {plusmn}{inf}, or if _y_ is 0 and the other argument is non-NaN or if
     either argument is a NaN.
* *rootn*({plusmn}0, _n_) is {plusmn}{inf} for odd _n_ < 0.
* *rootn*({plusmn}0, _n_) is +{inf} for even _n_ < 0.
* *rootn*({plusmn}0, _n_) is +0 for even _n_ > 0.
* *rootn*({plusmn}0, _n_) is {plusmn}0 for odd _n_ > 0.
* *rootn*(_x_, _n_) returns a NaN for _x_ < 0 and _n_ is even.
* *rootn*(_x_, 0) returns a NaN.
* *round*(-0.5 < _x_ < 0) returns -0.
* *sinpi*({plusmn}0) returns {plusmn}0.
* *sinpi*(+__n__) returns +0 for positive integers _n_.
* *sinpi*(-_n_) returns -0 for negative integers _n_.
* *sinpi*({plusmn}{inf}) returns a NaN.
* *tanpi*({plusmn}0) returns {plusmn}0.
* *tanpi*({plusmn}{inf}) returns a NaN.
* *tanpi*(_n_) is *copysign*(0.0, _n_) for even integers _n_.
* *tanpi*(_n_) is *copysign*(0.0, - _n_) for odd integers _n_.
* *tanpi*(_n_ + 0.5) for even integer _n_ is +{inf} where _n_ + 0.5 is
     representable.
* *tanpi*(_n_ + 0.5) for odd integer _n_ is -{inf} where _n_ + 0.5 is
     representable.
* *trunc*(-1 < _x_ < 0) returns -0.
     Binary file (standard input) matches


[[changes-to-c99-tc2-behavior]]
=== Changes to C99 TC2 Behavior

*modf* behaves as though implemented by:

[source,c]
----------
gentype modf(gentype value, gentype *iptr)
{
    *iptr = trunc( value );
    return copysign(isinf( value ) ? 0.0 : value - *iptr, value);
}
----------

*rint* always rounds according to round to nearest even rounding mode even
if the caller is in some other rounding mode.


[[edge-case-behavior-in-flush-to-zero-mode]]
=== Edge Case Behavior in Flush To Zero Mode

If denormals are flushed to zero, then a function may return one of four
results:

  . Any conforming result for non-flush-to-zero mode
  . If the result given by 1.
    is a sub-normal before rounding, it may be flushed to zero
  . Any non-flushed conforming result for the function if one or more of its
    sub-normal operands are flushed to zero.
  . If the result of 3.
    is a sub-normal before rounding, the result may be flushed to zero.

In each of the above cases, if an operand or result is flushed to zero, the
sign of the zero is undefined.

If subnormals are flushed to zero, a device may choose to conform to the
following edge cases for *nextafter* instead of those listed in the
<<additional-requirements-beyond-c99-tc2,additional requirements>> section.

[none]
* *nextafter*(+smallest normal, _y_ < +smallest normal) = +0.
* *nextafter*(-smallest normal, _y_ > -smallest normal) = -0.
* *nextafter*(-0, _y_ > 0) returns smallest positive normal value.
* *nextafter*(+0, _y_ < 0) returns smallest negative normal value.

For clarity, subnormals or denormals are defined to be the set of
representable numbers in the range 0 < _x_ < `TYPE_MIN` and `-TYPE_MIN` <
_x_ < -0.
They do not include {plusmn}0.
A non-zero number is said to be sub-normal before rounding if after
normalization, its radix-2 exponent is less than (`TYPE_MIN_EXP` - 1)
footnote:[{fn-min-float-constants}].


[[image-addressing-and-filtering]]
= Image Addressing and Filtering

Let w~t~, h~t~ and d~t~ be the width, height (or image array size for a 1D
image array) and depth (or image array size for a 2D image array) of the
image in pixels.
Let _coord.xy_ (also referred to as (_s_,_t_)) or _coord.xyz_ (also referred
to as (_s_,_t_,_r_)) be the coordinates specified to *read_image{f|i|ui}*.
The sampler specified in *read_image{f|i|ui}* is used to determine how to
sample the image and return an appropriate color.


[[image-coordinates]]
== Image Coordinates

This affects the interpretation of image coordinates.
If image coordinates specified to *read_image{f|i|ui}* are normalized (as
specified in the sampler), the _s_, _t_, and _r_ coordinate values are
multiplied by w~t~, h~t,~ and d~t~ respectively to generate the unnormalized
coordinate values.
For image arrays, the image array coordinate (i.e. _t_ if it is a 1D image
array or _r_ if it is a 2D image array) specified to *read_image{f|i|ui}*
must always be the un-normalized image coordinate value.

Let (_u_,_v_,_w_) represent the unnormalized image coordinate values.


[[addressing-and-filter-modes]]
== Addressing and Filter Modes

We first describe how the addressing and filter modes are applied to
generate the appropriate sample locations to read from the image if the
addressing mode is not `CLK_ADDRESS_REPEAT` nor
`CLK_ADDRESS_MIRRORED_REPEAT`.

After generating the image coordinate (_u_,_v_,_w_) we apply the appropriate
addressing and filter mode to generate the appropriate sample locations to
read from the image.

If values in (_u_,_v_,_w_) are `INF` or NaN, the behavior of
*read_image{f|i|ui}* is undefined.

*Filter Mode* `CLK_FILTER_NEAREST`

When filter mode is `CLK_FILTER_NEAREST`, the image element in the image
that is nearest (in Manhattan distance) to that specified by (_u_,_v_,_w_)
is obtained.
This means the image element at location (_i_,_j_,_k_) becomes the image
element value, where

[source,c]
----------
i = address_mode((int)floor(u))
j = address_mode((int)floor(v))
k = address_mode((int)floor(w))
----------

For a 3D image, the image element at location (_i_,_j_,_k_) becomes the
color value.
For a 2D image, the image element at location (_i_,_j_) becomes the color
value.

The following table describes the address_mode function.

[[table-address-modes-texel-location]]
.Addressing modes to generate texel location
[cols=",",]
|====
| *Addressing Mode*           | *Result of address_mode(coord)*
| `CLK_ADDRESS_CLAMP_TO_EDGE` | clamp (coord, 0, size - 1)
| `CLK_ADDRESS_CLAMP`         | clamp (coord, -1, size)
| `CLK_ADDRESS_NONE`          | coord
|====

The `size` term in this table is w~t~ for _u_, h~t~ for _v_ and d~t~ for
_w_.

The `clamp` function used in this table is defined as:

[source,c]
----------
clamp(a, b, c) = return (a < b) ? b : ((a > c) ? c : a)
----------

If the selected texel location (_i_,_j_,_k_) refers to a location outside
the image, the border color is used as the color value for this texel.

*Filter Mode* `CLK_FILTER_LINEAR`

When filter mode is `CLK_FILTER_LINEAR`, a 2{times}2 square of image
elements for a 2D image or a 2{times}2{times}2 cube of image elements for a
3D image is selected.
This 2{times}2 square or 2{times}2{times}2 cube is obtained as follows.

Let

[source,c]
----------
i0 = address_mode((int)floor(u - 0.5))
j0 = address_mode((int)floor(v - 0.5))
k0 = address_mode((int)floor(w - 0.5))
i1 = address_mode((int)floor(u - 0.5) + 1)
j1 = address_mode((int)floor(v - 0.5) + 1)
k1 = address_mode((int)floor(w - 0.5) + 1)
a = frac(u - 0.5)
b = frac(v - 0.5)
c = frac(w - 0.5)
----------

where `frac(x)` denotes the fractional part of x and is computed as `x -
floor(x)`.

For a 3D image, the image element value is found as

[source,c]
----------
T = (1 - a) * (1 - b) * (1 - c) * T_i0j0k0
    + a * (1 - b) * (1 - c) * T_i1j0k0
    + (1 - a) * b * (1 - c) * T_i0j1k0
    + a * b * (1 - c) * T_i1j1k0
    + (1 - a) * (1 - b) * c * T_i0j0k1
    + a * (1 - b) * c * T_i1j0k1
    + (1 - a) * b * c * T_i0j1k1
    + a * b * c * T_i1j1k1
----------

where `T_ijk` is the image element at location (_i_,_j_,_k_) in the 3D image.

For a 2D image, the image element value is found as

[source,c]
----------
T = (1 - a) * (1 - b) * T_i0j0
    + a * (1 - b) * T_i1j0
    + (1 - a) * b * T_i0j1
    + a * b * T_i1j1
----------

where `T_ij` is the image element at location (_i_,_j_) in the 2D image.

If any of the selected `T_ijk` or `T_ij` in the above equations refers to a
location outside the image, the border color is used as the color value for
`T_ijk` or `T_ij`.

If the image channel type is `CL_FLOAT` or `CL_HALF_FLOAT` and any of the
image elements `T_ijk` or `T_ij` is `INF` or NaN, the behavior of the built-in
image read function is undefined.

We now discuss how the addressing and filter modes are applied to generate
the appropriate sample locations to read from the image if the addressing
mode is `CLK_ADDRESS_REPEAT`.

If values in (_s_,_t_,_r_) are `INF` or NaN, the behavior of the built-in
image read functions is undefined.

*Filter Mode* `CLK_FILTER_NEAREST`

When filter mode is `CLK_FILTER_NEAREST`, the image element at location
(_i_,_j_,_k_) becomes the image element value, with _i_, _j_, and _k_
computed as

[source,c]
----------
u = (s - floor(s)) * w_t
i = (int)floor(u)
if (i > w_t - 1)
    i = i - w_t

v = (t - floor(t)) * h_t
j = (int)floor(v)
if (j > h_t - 1)
    j = j - h_t

w = (r - floor(r)) * d_t
k = (int)floor(w)
if (k > d_t - 1)
    k = k - d_t
----------


For a 3D image, the image element at location (_i_,_j_,_k_) becomes the
color value.
For a 2D image, the image element at location (_i_,_j_) becomes the color
value.

*Filter Mode* `CLK_FILTER_LINEAR`

When filter mode is `CLK_FILTER_LINEAR`, a 2{times}2 square of image
elements for a 2D image or a 2{times}2{times}2 cube of image elements for a
3D image is selected.
This 2{times}2 square or 2{times}2{times}2 cube is obtained as follows.

Let

[source,c]
----------
u = (s - floor(s)) * w_t
i0 = (int)floor(u - 0.5)
i1 = i0 + 1
if (i0 < 0)
    i0 = w_t + i0
if (i1 > w_t - 1)
    i1 = i1 - w_t

v = (t - floor(t)) * h_t
j0 = (int)floor(v - 0.5)
j1 = j0 + 1
if (j0 < 0)
    j0 = h_t + j0
if (j1 > h_t - 1)
    j1 = j1 - h_t

w = (r - floor(r)) * d_t
k0 = (int)floor(w - 0.5)
k1 = k0 + 1
if (k0 < 0)
    k0 = d_t + k0
if (k1 > d_t - 1)
    k1 = k1 - d_t

a = frac(u - 0.5)
b = frac(v - 0.5)
c = frac(w - 0.5)
----------

where `frac(x)` denotes the fractional part of x and is computed as `x -
floor(x)`.

For a 3D image, the image element value is found as

[source,c]
----------
T = (1 - a) * (1 - b) * (1 - c) * T_i0j0k0
    + a * (1 - b) * (1 - c) * T_i1j0k0
    + (1 - a) * b * (1 - c) * T_i0j1k0
    + a * b * (1 - c) * T_i1j1k0
    + (1 - a) * (1 - b) * c * T_i0j0k1
    + a * (1 - b) * c * T_i1j0k1
    + (1 - a) * b * c * T_i0j1k1
    + a * b * c * T_i1j1k1
----------

where `T_ijk` is the image element at location (_i_,_j_,_k_) in the 3D image.

For a 2D image, the image element value is found as

[source,c]
----------
T = (1 - a) * (1 - b) * T_i0j0
    + a * (1 - b) * T_i1j0
    + (1 - a) * b * T_i0j1
    + a * b * T_i1j1
----------

where `T_ij` is the image element at location (_i_,_j_) in the 2D image.

If the image channel type is `CL_FLOAT` or `CL_HALF_FLOAT` and any of the
image elements `T_ijk` or `T_ij` is `INF` or NaN, the behavior of the built-in
image read function is undefined.

We now discuss how the addressing and filter modes are applied to generate
the appropriate sample locations to read from the image if the addressing
mode is `CLK_ADDRESS_MIRRORED_REPEAT`.
The `CLK_ADDRESS_MIRRORED_REPEAT` addressing mode causes the image to be
read as if it is tiled at every integer seam with the interpretation of the
image data flipped at each integer crossing.
For example, the (_s_,_t_,_r_) coordinates between 2 and 3 are addressed
into the image as coordinates from 1 down to 0.
If values in (_s_,_t_,_r_) are `INF` or NaN, the behavior of the built-in
image read functions is undefined.

*Filter Mode* `CLK_FILTER_NEAREST`

When filter mode is `CLK_FILTER_NEAREST`, the image element at location
(_i_,_j_,_k_) becomes the image element value, with _i_,_j_ and k computed
as

[source,c]
----------
s' = 2.0f * rint(0.5f * s)
s' = fabs(s - s')
u = s' * w_t
i = (int)floor(u)
i = min(i, w_t - 1)

t' = 2.0f * rint(0.5f * t)
t' = fabs(t - t')
v = t' * h_t
j = (int)floor(v)
j = min(j, h_t - 1)

r' = 2.0f * rint(0.5f * r)
r' = fabs(r - r')
w = r' * d_t
k = (int)floor(w)
k = min(k, d_t - 1)
----------

For a 3D image, the image element at location (_i_,_j_,_k_) becomes the
color value.
For a 2D image, the image element at location (_i_,_j_) becomes the color
value.

*Filter Mode* `CLK_FILTER_LINEAR`

When filter mode is `CLK_FILTER_LINEAR`, a 2{times}2 square of image
elements for a 2D image or a 2{times}2{times}2 cube of image elements for a
3D image is selected.
This 2{times}2 square or 2{times}2{times}2 cube is obtained as follows.

Let

[source,c]
----------
s' = 2.0f * rint(0.5f * s)
s' = fabs(s - s')
u = s' * w_t
i0 = (int)floor(u - 0.5f)
i1 = i0 + 1
i0 = max(i0, 0)
i1 = min(i1, w_t - 1)

t' = 2.0f * rint(0.5f * t)
t' = fabs(t - t')
v = t' * h_t
j0 = (int)floor(v - 0.5f)
j1 = j0 + 1
j0 = max(j0, 0)
j1 = min(j1, h_t - 1)

r' = 2.0f * rint(0.5f * r)
r' = fabs(r - r')
w = r' * d_t
k0 = (int)floor(w - 0.5f)
k1 = k0 + 1
k0 = max(k0, 0)
k1 = min(k1, d_t - 1)

a = frac(u - 0.5)
b = frac(v - 0.5)
c = frac(w - 0.5)
----------

where `frac(x)` denotes the fractional part of x and is computed as `x -
floor(x)`.

For a 3D image, the image element value is found as

[source,c]
----------
T = (1 - a) * (1 - b) * (1 - c) * T_i0j0k0
    + a * (1 - b) * (1 - c) * T_i1j0k0
    + (1 - a) * b * (1 - c) * T_i0j1k0
    + a * b * (1 - c) * T_i1j1k0
    + (1 - a) * (1 - b) * c * T_i0j0k1
    + a * (1 - b) * c * T_i1j0k1
    + (1 - a) * b * c * T_i0j1k1
    + a * b * c * T_i1j1k1
----------

where `T_ijk` is the image element at location (_i_,_j_,_k_) in the 3D image.

For a 2D image, the image element value is found as

[source,c]
----------
T = (1 - a) * (1 - b) * T_i0j0
    + a * (1 - b) * T_i1j0
    + (1 - a) * b * T_i0j1
    + a * b * T_i1j1
----------

where `T_ij` is the image element at location (_i_,_j_) in the 2D image.

For a 1D image, the image element value is found as

[source,c]
----------
T = (1 - a) * T_i0
    + a * T_i1
----------

where `T_i` is the image element at location (_i_) in the 1D image.

If the image channel type is `CL_FLOAT` or `CL_HALF_FLOAT` and any of the
image elements `T_ijk` or `T_ij` is `INF` or NaN, the behavior of the built-in
image read function is undefined.

[NOTE]
====
If the sampler is specified as using unnormalized coordinates
(floating-point or integer coordinates), filter mode set to
`CLK_FILTER_NEAREST` and addressing mode set to one of the following modes -
`CLK_ADDRESS_NONE`, `CLK_ADDRESS_CLAMP_TO_EDGE` or `CLK_ADDRESS_CLAMP`, the
<<addressing-and-filter-modes,location of the image element in the image>>
given by (_i_,_j_,_k_) will be computed without any loss of precision.

For all other sampler combinations of normalized or unnormalized
coordinates, filter and addressing modes, the relative error or precision of
the addressing mode calculations and the image filter operation are not
defined by this revision of the OpenCL specification.
To ensure a minimum precision of image addressing and filter calculations
across any OpenCL device, for these sampler combinations, developers should
unnormalize the image coordinate in the kernel and implement the linear
filter in the kernel with appropriate calls to *read_image{f|i|ui}* with a
sampler that uses unnormalized coordinates, filter mode set to
`CLK_FILTER_NEAREST`, addressing mode set to `CLK_ADDRESS_NONE`,
`CLK_ADDRESS_CLAMP_TO_EDGE` _or_ `CLK_ADDRESS_CLAMP`, and finally performing
the interpolation of color values read from the image to generate the
filtered color value.
====


[[conversion-rules]]
== Conversion Rules

In this section we discuss conversion rules that are applied when reading
and writing images in a kernel.


[[conversion-rules-for-normalized-integer-channel-data-types]]
=== Conversion rules for normalized integer channel data types

In this section we discuss converting normalized integer channel data types
to floating-point values and vice-versa.


[[converting-normalized-integer-channel-data-types-to-floating-point-values]]
==== Converting normalized integer channel data types to floating-point values

For images created with image channel data type of `CL_UNORM_INT8` and
`CL_UNORM_INT16`, *read_imagef* will convert the channel values from an
8-bit or 16-bit unsigned integer to normalized floating-point values in the
range [`0.0f`, `1.0f`].

For images created with image channel data type of `CL_SNORM_INT8` and
`CL_SNORM_INT16`, *read_imagef* will convert the channel values from an
8-bit or 16-bit signed integer to normalized floating-point values in the
range [`-1.0f`, `1.0f`].

These conversions are performed as follows:

`CL_UNORM_INT8` (8-bit unsigned integer) {rightarrow} `float`

[none]
* normalized `float` value = `(float)c / 255.0f`

`CL_UNORM_INT_101010` (10-bit unsigned integer) {rightarrow} `float`

[none]
* normalized `float` value = `(float)c / 1023.0f`

`CL_UNORM_INT16` (16-bit unsigned integer) {rightarrow} `float`

[none]
* normalized `float` value = `(float)c / 65535.0f`

`CL_SNORM_INT8` (8-bit signed integer) {rightarrow} `float`

[none]
* normalized `float` value = *max*(`-1.0f`, `(float)c / 127.0f`)

`CL_SNORM_INT16` (16-bit signed integer) {rightarrow} `float`

[none]
* normalized `float` value = *max*(`-1.0f`, `(float)c / 32767.0f`)

The precision of the above conversions is \<= 1.5 ulp except for the
following cases.

For `CL_UNORM_INT8`

[none]
* 0 must convert to `0.0f` and
* 255 must convert to `1.0f`

For `CL_UNORM_INT_101010`

[none]
* 0 must convert to `0.0f` and
* 1023 must convert to `1.0f`

For `CL_UNORM_INT16`

[none]
* 0 must convert to `0.0f` and
* 65535 must convert to `1.0f`

For `CL_SNORM_INT8`

[none]
* -128 and -127 must convert to `-1.0f`,
* 0 must convert to `0.0f` and
* 127 must convert to `1.0f`

For `CL_SNORM_INT16`

[none]
* -32768 and -32767 must convert to `-1.0f`,
* 0 must convert to `0.0f` and
* 32767 must convert to `1.0f`


[[converting-floating-point-values-to-normalized-integer-channel-data-types]]
==== Converting floating-point values to normalized integer channel data types

For images created with image channel data type of `CL_UNORM_INT8` and
`CL_UNORM_INT16`, *write_imagef* will convert the floating-point color value
to an 8-bit or 16-bit unsigned integer.

For images created with image channel data type of `CL_SNORM_INT8` and
`CL_SNORM_INT16`, *write_imagef* will convert the floating-point color value
to an 8-bit or 16-bit signed integer.

The preferred method for how conversions from floating-point values to
normalized integer values are performed is as follows:

`float` {rightarrow} `CL_UNORM_INT8` (8-bit unsigned integer)

[none]
* *convert_uchar_sat_rte*(`f * 255.0f`)

`float` {rightarrow} `CL_UNORM_INT_101010` (10-bit unsigned integer)

[none]
* *min*(*convert_ushort_sat_rte*(`f * 1023.0f`), `0x3ff`)

`float` {rightarrow} `CL_UNORM_INT16` (16-bit unsigned integer)

[none]
* *convert_ushort_sat_rte*(`f * 65535.0f`)

`float` {rightarrow} `CL_SNORM_INT8` (8-bit signed integer)

[none]
* *convert_char_sat_rte*(`f * 127.0f`)

`float` {rightarrow} `CL_SNORM_INT16` (16-bit signed integer)

[none]
* *convert_short_sat_rte*(`f * 32767.0f`)

Please refer to the <<out-of-range-behavior,out-of-range behavior and
saturated conversion>> rules.

OpenCL implementations may choose to approximate the rounding mode used in
the conversions described above.
If a rounding mode other than round to nearest even (`_rte`) is used, the
absolute error of the implementation dependant rounding mode vs.
the result produced by the round to nearest even rounding mode must be {leq}
0.6.

`float` {rightarrow} `CL_UNORM_INT8` (8-bit unsigned integer)

[none]
* Let f~preferred~ = *convert_uchar_sat_rte*(f * `255.0f`)
* Let f~approx~ = *convert_uchar_sat_<impl-rounding-mode>*(f * `255.0f`)
* *fabs*(f~preferred~ - f~approx~) must be \<= 0.6

`float` {rightarrow} `CL_UNORM_INT_101010` (10-bit unsigned integer)

[none]
* Let f~preferred~ = *convert_ushort_sat_rte*(f * `1023.0f`)
* Let f~approx~ = *convert_ushort_sat_<impl-rounding-mode>*(f *
     `1023.0f`)
* *fabs*(f~preferred~ - f~approx~) must be \<= 0.6

`float` {rightarrow} `CL_UNORM_INT16` (16-bit unsigned integer)

[none]
* Let f~preferred~ = *convert_ushort_sat_rte*(f * `65535.0f`)
* Let f~approx~ = *convert_ushort_sat_<impl-rounding-mode>*(f *
     `65535.0f`)
* *fabs*(f~preferred~ - f~approx~) must be \<= 0.6

`float` {rightarrow} `CL_SNORM_INT8` (8-bit signed integer)

[none]
* Let f~preferred~ = *convert_char_sat_rte*(f * `127.0f`)
* Let f~approx~ = *convert_char_sat_<impl_rounding_mode>*(f * `127.0f`)
* *fabs*(f~preferred~ - f~approx~) must be \<= 0.6

`float` {rightarrow} `CL_SNORM_INT16` (16-bit signed integer)

[none]
* Let f~preferred~ = *convert_short_sat_rte*(f * `32767.0f`)
* Let f~approx~ = *convert_short_sat_<impl-rounding-mode>*(f *
     `32767.0f`)
* *fabs*(f~preferred~ - f~approx~) must be \<= 0.6


[[conversion-rules-for-half-precision-floating-point-channel-data-type]]
=== Conversion rules for half precision floating-point channel data type

For images created with a channel data type of `CL_HALF_FLOAT`, the
conversions from `half` to `float` are lossless (as described in
<<the-half-data-type,"The half data type">>).
Conversions from `float` to `half` round the mantissa using the round to
nearest even or round to zero rounding mode.
Denormalized numbers for the `half` data type which may be generated when
converting a `float` to a `half` may be flushed to zero.
A `float` NaN must be converted to an appropriate NaN in the `half` type.
A `float` `INF` must be converted to an appropriate `INF` in the `half`
type.


[[conversion-rules-for-floating-point-channel-data-type]]
=== Conversion rules for floating-point channel data type

The following rules apply for reading and writing images created with
channel data type of `CL_FLOAT`.

  * NaNs may be converted to a NaN value(s) supported by the device.
  * Denorms can be flushed to zero.
  * All other values must be preserved.


[[conversion-rules-for-signed-and-unsigned-8-bit-16-bit-and-32-bit-integer-channel-data-types]]
=== Conversion rules for signed and unsigned 8-bit, 16-bit and 32-bit integer channel data types

Calls to *read_imagei* with channel data type values of `CL_SIGNED_INT8`,
`CL_SIGNED_INT16` and `CL_SIGNED_INT32` return the unmodified integer values
stored in the image at specified location.

Calls to *read_imageui* with channel data type values of `CL_UNSIGNED_INT8`,
`CL_UNSIGNED_INT16` and `CL_UNSIGNED_INT32` return the unmodified integer
values stored in the image at specified location.

Calls to *write_imagei* will perform one of the following conversions:

32 bit signed integer {rightarrow} 8-bit signed integer

[none]
* *convert_char_sat*(i)

32 bit signed integer {rightarrow} 16-bit signed integer

[none]
* *convert_short_sat*(i)

32 bit signed integer {rightarrow} 32-bit signed integer

[none]
* no conversion is performed

Calls to *write_imageui* will perform one of the following conversions:

32 bit unsigned integer {rightarrow} 8-bit unsigned integer

[none]
* *convert_uchar_sat*(i)

32 bit unsigned integer {rightarrow} 16-bit unsigned integer

[none]
* *convert_ushort_sat*(i)

32 bit unsigned integer {rightarrow} 32-bit unsigned integer

[none]
* no conversion is performed

The conversions described in this section must be correctly saturated.


[[conversion-rules-for-srgba-and-sbgra-images]]
=== Conversion rules for sRGBA and sBGRA images

Standard RGB data, which roughly displays colors in a linear ramp of
luminosity levels such that an average observer, under average viewing
conditions, can view them as perceptually equal steps on an average display.
All 0's maps to `0.0f`, and all 1's maps to `1.0f`.
The sequence of unsigned integer encodings between all 0's and all 1's
represent a nonlinear progression in the floating-point interpretation of
the numbers between `0.0f` to `1.0f`.
For more detail, see the <<sRGB-spec, SRGB color standard>>.

Conversion from sRGB space is automatically done by *read_imagef* built-in
functions if the image channel order is one of the sRGB values described
above.
When reading from an sRGB image, the conversion from sRGB to linear RGB is
performed before the filter specified in the sampler specified to
read_imagef is applied.
If the format has an alpha channel, the alpha data is stored in linear color
space.
Conversion to sRGB space is automatically done by *write_imagef* built-in
functions if the image channel order is one of the sRGB values described
above and the device supports writing to sRGB images.

If the format has an alpha channel, the alpha data is stored in linear color
space.

The following is the conversion rule for converting a normalized 8-bit
unsigned integer sRGB color value to a floating-point linear RGB color value
using *read_imagef*.

[source,c]
----------
// Convert the normalized 8-bit unsigned integer R, G and B channel values
// to a floating-point value (call it c) as per rules described in section
// 8.3.1.1.

if (c <= 0.04045),
    result = c / 12.92;
else
    result = powr((c + 0.055) / 1.055, 2.4);
----------

The resulting floating point value, if converted back to an sRGB value
without rounding to a 8-bit unsigned integer value, must be within 0.5 ulp
of the original sRGB value.

The following are the conversion rules for converting a linear RGB
floating-point color value (call it _c_) to a normalized 8-bit unsigned
integer sRGB value using *write_imagef*.

[source,c]
----------
if (c is NaN)
    c = 0.0;
if (c > 1.0)
    c = 1.0;
else if (c < 0.0)
    c = 0.0;
else if (c < 0.0031308)
    c = 12.92 * c;
else
    c = 1.055 * powr(c, 1.0/2.4) - 0.055;

scaled_reference_result = c * 255
channel_component = floor(scaled_reference_result + 0.5);
----------

The precision of the above conversion should be such that

[none]
* `|generated_channel_component - scaled_reference_result|` {leq} 0.6

where `generated_channel_component` is the actual value that the
implementation produces and being checked for conformance.


[[selecting-an-image-from-an-image-array]]
== Selecting an Image from an Image Array

Let (_u_,_v_,_w_) represent the unnormalized image coordinate values for
reading from and/or writing to a 2D image in a 2D image array.

When read using a sampler, the 2D image layer selected is computed as:

[none]
* layer = *clamp*(*rint*(_w_), 0, d~t~ - 1)

otherwise the layer selected is computed as:

[none]
* layer = _w_

(since _w_ is already an integer) and the result is undefined if _w_ is not
one of the integers 0, 1, ... d~t~ - 1.

Let (_u_,_v_) represent the unnormalized image coordinate values for reading
from and/or writing to a 1D image in a 1D image array.

When read using a sampler, the 1D image layer selected is computed as:

[none]
* layer = *clamp*(*rint*(_v_), 0, h~t~ - 1)

otherwise the layer selected is computed as:

[none]
* layer = _v_

(since _v_ is already an integer) and the result is undefined if _v_ is not
one of the integers 0, 1, ... h~t~ - 1.


[[references]]
= Normative References

  . [[C99-spec]] "`ISO/IEC 9899:1999 - Programming languages - C`", with
    technical corrigenda TC1 and TC2,
    https://www.iso.org/standard/29237.html .
    References are to sections of this specific version, referred to as the
    "`C99 Specification`", although other versions exist.
  . [[C11-spec]] "`ISO/IEC 9899:2011 - Information technology - Programming
    languages - C`", https://www.iso.org/standard/57853.html .
    References are to sections of this specific version, referred to as the
    "`C11 Specification`", although other versions exist.
  . [[opencl-spec]] "`The OpenCL Specification, Version 3.0, Unified`",
    https://www.khronos.org/registry/OpenCL/ .
    References are to sections and tables of this specific version, although
    other versions exists.
  . [[opencl-device-queries]] "`Device Queries`" are defined in the
    <<opencl-spec,OpenCL Specification>> for *clGetDeviceInfo*, and the
    individual queries are defined in the "`OpenCL Device Queries`" table
    (4.3) of that Specification.
  . [[opencl-channel-order,image channel order]] "`Image Channel Order`" is
    defined in the <<opencl-spec,OpenCL Specification>> in the "`Image
    Format Descriptor`" section (5.3.1.1), and the individual channel orders
    are defined in the "`List of supported Image Channel Order Values`"
    table (5.6) of that Specification.
  . [[opencl-channel-data-type,image channel data type]] "`Image Channel
    Data Type`" is defined in the <<opencl-spec,OpenCL Specification>> in the
    "`Image Format Descriptor`" section (5.3.1.1), and the individual
    channel data types are defined in the "`List of supported Image Channel
    Data Types" table (5.7) of that Specification.
  . [[opencl-extension-spec]] "`The OpenCL Extension Specification, Version
    3.0, Unified`", https://www.khronos.org/registry/OpenCL/ .
    References are to sections and tables of this specific version, although
    other versions exists.
  . [[sRGB-spec]] "`IEC 61966-2-1:1999 Multimedia systems and equipment -
    Colour measurement and management - Part 2-1: Colour management -
    Default RGB colour space - sRGB`",
    https://webstore.iec.ch/publication/6169 .

// This is generatig asciidoctor errors:
//  OpenCL_C.txt: Failed to load AsciiDoc document - undefined method `+' for nil:NilClass
// Disabling acknowledgements for now.  We have them in the API spec already.
//<<<
//:numbered!:
//include::api/acknowledgements.asciidoc[]