ChangeLog

2016-06-10  Paul Smith  <psmith@gnu.org>

	GNU Make release 4.2.1.

2016-06-06  Paul Smith  <psmith@gnu.org>

	* maintMakefile: TP recommends rsync for retrieving PO files.

2016-05-31  Jeremy Devenport  <jeremy.devenport@gmail.com>  (tiny change)

	* main.c (main): [SV 48009] Reset stack limit for make re-exec.

2016-05-31  Paul Smith  <psmith@gnu.org>

	[SV 47995] Ensure forced double-colon rules work with -j.
	The fix for SV 44742 had a side-effect that some double-colon targets
	were skipped.  This happens because the "considered" facility assumed
	that all targets would be visited on each walk through the dependency
	graph: we used a bit for considered and toggled it on each pass; if
	we didn't walk the entire graph on every pass the bit would get out
	of sync.  The new behavior after SV 44742 might return early without
	walking the entire graph.  To fix this I changed the considered value
	to an integer which is monotonically increasing: it is then never
	possible to incorrectly determine that a previous pass through the
	graph already considered the current target.

	* filedef.h (struct file): make CONSIDERED an unsigned int.
	* main.c (main): No longer need to reset CONSIDERED.
	* remake.c (update_goal_chain): increment CONSIDERED rather than
	inverting it between 0<->1.
	(update_file_1): Reset CONSIDERED to 0 so it's re-considered.
	(check_dep): Ditto.
	* tests/scripts/features/double_colon: Add a regression test.

2016-05-31  Paul Smith  <psmith@gnu.org>

	* DELETE_ON_ERROR: [SV 48061] Use "exit 1" for portability.
	Reported by Joel Fredrikson <Joel.Fredrikson@it.uu.se>

	* w32/pathstuff.c: [SV 47996] Use ISBLANK() not isblank().

2016-05-28  Eli Zaretskii  <eliz@gnu.org>

	Fix printing time stamps on MS-Windows
	* dir.c (print_dir_data_base) [WINDOWS32]: Use %I64u format for
	printing unsigned 64-bit data types, as %ull is not universally
	supported.

2016-05-27  Luke Allardyce  <lukeallardyce@gmail.com>  (tiny change)

	[SV 48037] Fix MinGW build with Posix configury tools
	* w32/Makefile.am (libw32_a_CPPFLAGS): Add -I$(srcdir)/glob.

2016-05-22  Paul Smith  <psmith@gnu.org>

	GNU Make release 4.2.

2016-05-21  Joe Crayne  <oh.hello.joe@gmail.com>  (tiny change)

	[SV 44742] Fix double-colon rules plus parallel builds.
	* remake.c (update_file): Don't update double-colon target status
	if we're still building targets.
	(ftime_t): Don't propagate timestamps for double-colon targets that
	we've not examined yet.
	* tests/scripts/features/double_colon: Add parallel build tests.

2016-05-21  Paul Smith  <psmith@gnu.org>

	* read.c (eval): [SV 47960] Skip record waiting files when ignoring.
	* tests/scripts/features/conditionals: Test this scenario.

	Separate the GNU make load ABI from internal types.
	Create an internal type "floc" and convert all users to that type.
	* gnumake.h (gmk_floc): Remove the offset field from this type.
	* loadapi.c (gmk_eval): Convert gmk_floc to internal floc.

2016-05-21  Paul Eggert  <eggert@cs.ucla.edu>

	Fixes for enhanced GCC warnings.
	Move function prototypes into header files and out of .c files.
	Use void argument lists for functions that accept no args.
	Remove unused macros.  Make private functions static.  Align
	types with printf format characters.

2016-05-21  Paul Smith  <psmith@gnu.org>

	Fix compile issues with Windows and VMS.
	* main.c (initialize_stopchar_map): isblank() is not part of C89.
	Install bits for space and tab directly.
	* makeint.h: Don't define vfork; autoconf handles this for us.
	* vmsjobs.c: Rename NEXT_TOKEN to V_NEXT_TOKEN to avoid conflicts.
	* dir.c (print_dir_data_base): Visual Studio C doesn't have int64_t.
	* w32/subproc/sub_proc.c (process_begin): Missing arg to memset().
	* build_w32.bat: Don't use obsolete Visual Studio flags.

	Allow compiling with an ISO C 1989/1990 compiler.
	* posixos.c (jobserver_post_child): Use C89 for loop syntax.
	* remake.c (update_goal_chain): Ditto.
	* variable.c (parse_variable_definition): Ditto.

2016-05-17  Eli Zaretskii  <eliz@gnu.org>

	[SV 47942] Avoid random crashes in subordinate programs on MS-Windows
	* w32/subproc/sub_proc.c (process_begin): Zero out startInfo
	before using it.  Fixes crashes in Intel Fortran compiler invoked
	by Make.

2016-04-24  Eli Zaretskii  <eliz@gnu.org>

	Fix the MS-Windows MinGW build
	* build_w32.bat (GccCompile): Use -std=gnu99, as some code uses
	C99 features ('for' loop initial declarations).

	* dir.c (print_dir_data_base) [WINDOWS32]: Cast 'mtime' to
	'int64_t', and use %I64d to print it, to avoid compile-time
	warning about printing a 'time_t' value, which could be either
	a 32-bit or a 64 bit integral type.

2016-04-23  Paul Smith  <psmith@gnu.org>

	* tests/scripts/features/output-sync: increase test timeout.
	I'm getting random failures with a timeout of 10s; increase to 30s.

2016-04-11  Paul Smith  <psmith@gnu.org>

	* NEWS: Update for pre-release

	* dep.h, makeint.h (show_goal_error): Move to makeint.h.

2016-04-11  Paul Smith  <psmith@gnu.org>

	[SV 46433] Show recipe line offsets in line number messages.
	While displaying line numbers, show the relevant line number inside
	the recipe not just the first line of the entire recipe.
	Sample changes suggested by Brian Vandenberg <phantall@gmail.com>

	* gnumake.h (gmk_floc): Add an 'offset' to track the recipe offset.
	* read.c (eval, eval_makefile, eval_buffer): Initialize 'offset'.
	(record_files, install_pattern_rule): Ditto.
	* job.c (new_job, job_next_command): Update 'offset' based on the
	line of the recipe we're expanding or invoking.
	(child_error): Add 'offset' when showing the line number.
	* function.c (func_shell_base): Ditto.
	* output.c (error, fatal): Ditto.
	* NEWS: Mention the new ability.
	* tests/scripts/features/errors: Check the line number on errors.
	* tests/scripts/functions/warning: Check the line number on warnings.
	* tests/scripts/features/output-sync,
	tests/scripts/features/parallelism, tests/scripts/functions/shell,
	tests/scripts/functions/error: Update line numbers.

2016-04-09  Paul Smith  <psmith@gnu.org>

	* maintMakefile: Add a rule for storing preprocessor output.

	[SV 102] Don't show unnecessary include file errors.
	Delay the generation of error messages for included files until we
	are sure that we can't rebuild that included file.
	* dep.h (struct dep): Don't reuse "changed"; make a separate field
	to keep "flags".  Get rid of dontcare and use the flag.
	(struct goaldep): Create a new structure for goal prereqs
	that tracks an errno value and the floc where the include happened.
	Rework the structures to ensure they are supersets as expected.
	In maintainer mode with GCC, use inline to get type checking.
	* read.c (eval_makefile): Return a struct goaldep for the new
	makefile.  Ensure errno is set properly to denote a failure.
	(read_all_makefiles): Switch to goaldep and check errno.
	(eval): Don't show included file errors; instead remember them.
	* remake.c (update_goal_chain): Set global variables to the current
	goaldep we're building, and the entire chain.
	(show_goal_error): Check if the current failure is a consequence
	of building an included makefile and if so print an error.
	(complain): Call show_goal_error() on rule failure.
	* job.c (child_error): Call show_goal_error() on child error.
	* main.c (main): Switch from struct dep to goaldep.
	* misc.c (free_dep_chain): Not used; make into a macro.
	* tests/scripts/features/include: Update and include new tests.
	* tests/scripts/options/dash-B, tests/scripts/options/dash-W,
	tests/scripts/options/print-directory,
	tests/scripts/variables/MAKE_RESTARTS: Update known-good-output.

	* job.c (child_error): Add filename length to output length.
	Reported by Dale Stimson <dale@riyescott.com>

2016-04-04  Paul Smith  <psmith@gnu.org>

	Preserve the real value of -jN in MAKEFLAGS using jobserver.
	Previously if the jobserver was active, MAKEFLAGS would contain only
	the -j option but not the number (not -j5 or whatever) so users
	could not discover that value.  Allow that value to be provided in
	MAKEFLAGS without error but still give warnings if -jN is provided
	on the command line if the jobserver is already activated.

	* NEWS: Discuss the new behavior.
	* os.h, posixos.c, w32/w32os.c: Return success/failure from
	jobserver_setup() and jobserver_parse_auth().
	* main.c (main): Separate the command line storage of job slots (now
	in arg_job_slots) from the control storage (in job_slots).  Make a
	distinction between -jN flags read from MAKEFLAGS and those seen
	on the command line: for the latter if the jobserver is enabled then
	warn and disable it, as before.
	* tests/scripts/features/jobserver: Add new testing.

2016-04-04  Paul Smith  <psmith@gnu.org>

	* tests/run_make_tests.pl: Add file/lineno info to .run file.

	* maintMakefile: Fix logging of check-alt-config target.

	* job.c (child_execute_job): Fix $(shell...) under NO_OUTPUT_SYNC.
	* main.c (decode_output_sync_flags): Use NONE for NO_OUTPUT_SYNC.

	* main.c (main): Restrict disabling debugging for MAKEFILES.

	* Makefile.am, w32/Makefile.am: Fix *os.c for Windows builds.
	Original change provided by Luke Allardyce <lukeallardyce@gmail.com>

	* make.texi: Confirm that CURDIR contains an absolute path.

	* docs/make.texi: [SV 47392] Add "Integrating make" chapter.

	Change --jobserver-fds to more generic --jobserver-auth.
	* NEWS: Mention the change.
	* main.c: Rename jobserver_fds variable to jobserver_auth and
	--jobserver-fds option to --jobserver-auth.
	* os.h, posixos.c, w32/w32os.c: Rename jobserver_parse_arg() and
	jobserver_get_arg() to jobserver_parse_auth()/jobserver_get_auth().

2016-03-23  Paul Smith  <psmith@gnu.org>

	* tests/run_make_tests.pl: Preserve $make_command
	* tests/scripts/options/dash-n: Use $make_command.  This fixes
	a spurious failure when running tests with valgrind enabled.

	* variable.c: Clean up some memory leaks.

	[SV 46995] Strip leading/trailing space from variable names
	* makeint.h: Change MAP_SPACE to MAP_NEWLINE, and add MAP_PATHSEP
	and MAP_SPACE which is now MAP_BLANK|MAP_NEWLINE.  Create
	NEW_TOKEN(), END_OF_TOKEN(), ISBLANK(), ISSPACE() macros.
	* main.c (initialize_stopchar_map): Set MAP_NEWLINE only for
	newline characters.
	* Convert all uses of isblank() and isspace() to macros.
	* Examine all uses of isblank() (doesn't accept newlines) and
	change them wherever possible to ISSPACE() (does accept newlines).
	* function.c (func_foreach): Strip leading/trailing space.
	* variable.c (parse_variable_definition): Clean up.
	* tests/scripts/functions/foreach: Test settings and errors.
	* tests/scripts/functions/call: Rewrite to new-style.
	* tests/scripts/misc/bs-nl: Add many more tests for newlines.

2016-03-21  Paul Smith  <psmith@gnu.org>

	* function.c (func_file): Support reading from files.
	* NEWS: Add information about reading files.
	* make.texi (File Function): Describe reading files.
	* tests/scripts/functions/file: Test new features for $(file ...)

2016-03-20  Paul Smith  <psmith@gnu.org>

	* doc/make.texi (Setting Variables): Fix typo (add comma).

	* job.c (child_error): Combine file info with error message.
	* tests/scripts/...: Update error message matches.

2016-03-19  Paul Smith  <psmith@gnu.org>

	* variable.c: Align type of variable_changenum.

2016-03-13  Paul Smith  <psmith@gnu.org>

	[SV 45728] Detect changes in .VARIABLES more accurately.
	For performance, we only recompute .VARIABLES when (a) it's expanded
	and (b) when its value will change from a previous expansion.  To
	determine (b) we were checking the number of entries in the hash
	table which used to work until we started undefining entries: now if
	you undefine and redefine the same number of entries in between
	expanding .VARIABLES, it doesn't detect any change.  Instead, keep
	an increasing change number.
	* variables.c: Add variable_changenum.
	(define_variable_in_set, merge_variable_sets): Increment
	variable_changenum if adding a new variable to the global set.
	(undefine_variable_in_set): Increment variable_changenum if
	undefining a variable from the global set.
	(lookup_special_var): Test variable_changenum not the hash table.
	* tests/scripts/variables/special: Test undefining variables.

	* main.c(main): Disable output sync without parallel builds.

	[SV 46581] Pre-define .LOADED to avoid warnings.
	* main.c (main): Pre-define .LOADED as a default-level variable.
	* load.c (load_file): Set the value rather than append it.  Avoid
	adding an extra initial whitespace.
	* tests/scripts/features/load: Run with --warn-undefined-variables.

2016-03-13  Paul Smith  <psmith@gnu.org>

	[SV 44555] Use vfork() instead of fork() where available.
	Testing has shown that vfork() is actually significantly
	more efficient on systems where it's supported, even for
	copy-on-write implementations.  If make is big enough,
	duplicating the page tables is significant overhead.

	* configure.ac: Check for fork/vfork.
	* makeint.h: Include vfork.h and set up #define for it.
	* os.h, posixos.c (get_bad_stdin): For children who can't use
	the normal stdin file descriptor, get a broken one.
	* job.c (start_job_command): Avoid so many ifdefs and simplify
	the invocation of child_execute_job()
	(child_execute_job): move the fork operation here so it can
	return early for the parent process.  Switch to use vfork().
	* function.c (func_shell_base): Use new child_execute_job() and
	simplify ifdefs.
	* job.h, main.c, remote-cstms.c, vmsjobs.c, w32os.c: Update
	declarations and calls.

2016-03-09  Paul Smith  <psmith@gnu.org>

	* job.c (exec_command): [SV 47365] Show error on exec failure.

2016-03-08  Paul Smith  <psmith@gnu.org>

	[SV 46261] Use pselect() for jobserver where supported.
	* Makefile.am, configure.ac: Check for pselect() and sys/select.h.
	* main.c (main): Block SIGCHLD if we have pselect() support.
	* posixos.c (jobserver_acquire): If we support pselect() then use
	it to query the jobserver pipe, while also listening for SIGCHLD.
	Also pselect() supports a timeout so avoid alarm() calls.

	Clean up some compiler warnings.
	* commands.c, commands.h: Use unsigned char for flags.
	* dir.c: Use time_t and size_t, and char for a boolean value.
	* job.c: Use unsigned and char.
	* read.c: Return a signed type since -1 is a valid return code.

	Extract jobserver implementation into OS-specific files.
	* os.h, posixos.c, w32/w32os.c: New files implementing jobserver.
	* job.c, job.h, main.c, makeint.h: Move content to new files.
	* w32/include/sub_proc.h, w32/subproc/sub_proc.c: Ditto.
	* Makefile.am: Build and package OS-specific files.
	* build_w32.bat, make_msvc_net2003.vcproj, README.W32.template:
	Update for new files, and clean up the build.
	* POTFILES.in, maintMakefile, NMakefile.template: Ditto.
	* w32/subproc/build.bat: Delete as unused.

	[SV 46261] Add more EINTRLOOP wrappers.
	This cannot be a perfect solution because there are always other
	possible places EINTR can happen, including external libraries
	such as gettext, Guile etc.

2016-02-29  Paul Smith  <psmith@gnu.org>

	* strcache.c (add_hugestring): [SV 46832] Support huge strings.
	The strcache was limited to strings of length 65535 or less,
	because the length is kept in an unsigned short.  To support
	huge strings add a new simple linked list, which we don't try
	to hash.

	* strcache.c (add_string): [SV 47071] Handle huge initial string.
	If the very first string added to the string cache is more than
	half the maximum size, we failed when moving the only strcache
	buffer to the full list.

	[SV 47151] Exit with 1 when checking recursive make -q
	* job.h (struct child): New bit to mark recursive command lines.
	* job.c (start_job_command): Set the recursive command line bit.
	(reap_children): If the child is a recursive command and it exits
	with 1 during question mode, don't print an error and exit with 1.
	* tests/scripts/options/dash-q: Add a regression test.

	* main.c (define_makeflags): Add parens to avoid GCC warning.

2016-02-29  Paul Smith  <psmith@gnu.org>

	* tests/scripts/features/archives: Handle deterministic archives.
	Newer versions of binutils allow ar to be compiled to generate
	"deterministic archives" by default: in this mode no timestamp
	information is generated in the static archive, which utterly
	breaks GNU make's archive updating capability.  Debian and Ubuntu
	have turned this feature on by default in their distributions
	which causes the regression tests to fail.

	Update the regression tests to check for the availability of the
	"U" option to ar which disables deterministic archives and allows
	GNU make's archive support to work properly again.

2016-02-28  Paul Smith  <psmith@gnu.org>

	Update Copyright statements for the new year.

	* doc/make.texi: [SV 47163] Fix typo in 'ifdef' documentation.

	* doc/make.texi: [SV 35455] Add more uses for Empty Recipes.

2015-11-07  Gisle Vanem  <gvanem@yahoo.no>

	Fix diagnostics on MS-Windows when environment is too large
		* w32/subproc/sub_proc.c (process_begin): Fix test of the error
		cause when the environment block is too large.

2015-10-27  Eli Zaretskii  <eliz@gnu.org>

	Update README.W32.template
	* README.W32.template: Update for latest developments.  Make it
	clear we don't recommend using HAVE_CASE_INSENSITIVE_FS in
	general.

	[SV 46304] Don't invoke C++ compiler on C sources on MS-Windows
	* default.c (default_variables) [HAVE_CASE_INSENSITIVE_FS]: Make
	COMPILE.C and LINK.C be synonyms for COMPILE.c and LINK.c,
	respectively.

2015-09-23  Eli Zaretskii  <eliz@gnu.org>

	[SV 45838] When invoking w32 programs, don't use free'd memory.
	* w32/subproc/sub_proc.c (process_begin): Freeing argv[0] makes
	the other argv[i] pointers invalid, so need to allocate a new
	array and copy argv[i] for i != 0 first, replacing argv[0] with
	the batch file name, before we can free argv[0].

2015-07-13  Paul Smith  <psmith@gnu.org>

	* implicit.c (pattern_search): [SV 43677] Mark files secondary.
	In order to fix SV 12267 we were marking the prerequisites of
	implicit (pattern) targets that existed elsewhere in the makefile
	as precious to keep them from being deleted as intermediate files.
	However this also keeps them from being deleted on error.  Instead
	mark them as secondary.
	* tests/scripts/targets/DELETE_ON_ERROR: Test DELETE_ON_ERROR.

2015-07-12  Paul Smith  <psmith@gnu.org>

	[SV 28092] Preserve the exit status of the $(shell...) function.
	Add a new variable .SHELLSTATUS which holds the exit status of the
	last-invoked shell function or != assignment.

	* NEWS, doc/make.texi: Document the change.
	* function.c (shell_completed, msdos_openpipe, func_shell_base): Add
	shell_completed() to handle the completion of the shell, by setting
	.SHELLSTATUS.  Call it where needed.
	* job.c (child_handler): Call shell_completed().
	* tests/scripts/functions/shell: Add tests for .SHELLSTATUS.

2015-07-12  Paul Smith  <psmith@gnu.org>

	* tests/scripts/misc/fopen-fail: [SV 42390] Increase test timeout.
	* Makefile.am (check-regression): Force ulimit -n for fopen-fail test.

	* job.c: [SV 43936] Check sigaction for error return.

	[SV 45049] Check for '$' being the last character in a string.
	* expand.c (variable_expand_string): Add a single '$' if '$' ends the
	string.
	* read.c (find_char_unquote, get_next_mword): Stop if '$' ends the
	string.
	* variable.c (parse_variable_definition): Ditto.

	* read.c (unescape_char): [SV 45050] Handle final backslashes.
	If the last thing in the string to be unescaped is a backslash,
	stop without reading beyond the end of the string.

	* strcache.c: [SV 45275] Handle very long strings.
	Our previous behavior for handling too-long strings involved
	increasing the size of the default string cache buffer, but the
	implementation was incomplete.  Instead, create a one-off large
	string cache entry and add it directly to the full cache list
	without changing the default buffer size.

2015-07-12  Duncan Moore  <duncan.moore@gmx.com>  (tiny change)

	* job.c [RISCOS]: Remove logic that is no longer required.

2015-07-12  Paul Smith  <psmith@gnu.org>

	* remake.c (update_file): [SV 44742] Keep double-colon rule status.
	Fix suggested by Everett Boyer <EvBoyer@aol.com>

2015-07-10  James Johnston  <johnstonj.public@codenest.com>  (tiny change)

	[SVN 45515] Check exit status of sub-make in subproc.bat
	* subproc.bat: Exit when sub-make invocation fails.

2015-07-10  Eli Zaretskii  <eliz@gnu.org>

	[SV 45515] Ignore Windows-specific build artifacts
	* .gitignore: Ignore *.exe, *.dll.a, *.lib, *pdb, and a few more MSVC
	specific artifacts.
	Suggested by James Johnston <johnstonj.public@codenest.com>

2015-02-28  Eli Zaretskii  <eliz@gnu.org>

	[SV 44348] Fix handling of shell widlcards on MS-Windows.
		* job.c (construct_command_argv_internal): If shell wildcard
		characters are found inside a string quoted with "..", give up the
		fast route and go through the shell.  Fixes Savannah bug #44348.

2015-01-27  John Malmberg  <wb8tyw@qsl.net>

	Fix bs-nl handling, exit and Environment for VMS.
	This fix required a complete rewrite of the command parser vmsjobs.c
	child_execute_job.  The old parser had too many incorrect assumptions
	about DCL commands and could not be repaired to extended.

	The parser now more closely parses VMS commands and handles quoted
	commands and redirection.  Command File mode has been improved, but can
	not fully support bs-nl syntax.

	VMS Unix shell simulation has been improved.

	* commands.c: vms_comma_separator is now a run-time setting.
	* function.c: vms_comma_separator is now a run-time setting.
	* function.c(func_basename_dir) now reports "[]" or "./" based on
	  VMS crtl runtime setting.
	* job.c(start_job_command): VMS Handle empty commands propery.
	* main.c: Add VMS environment variables for run-time settings.
	  * vms_legacy_behavior - Force older behavior.
	  * vms_comma_separator - Commas or spaces for separators.
	  * vms_unix_simulation - Enhanced Posix shell simulation features.
	  * Detect if VMS CRTL is set to report Unix paths instead of VMS.
	  * ':' and '>' are also MAP_DIRSEP on VMS.
	* makeint.h: Add VMS run-time option variables.
	* readme.vms: Update to current behavior.
	* variable.c(define_variable_in_set): Fix VMS Environment variable
	  lookup.
	* variable.c(define_automatic_variables): Remove some VMS specific
	  automatic variables and use the Unix ones instead.
	* vms_export_symbol.c: Set max symbol size correctly.
	* vmsjobs.c: child_execute_job() complete rewrite of VMS comand
	  parsing.
	* vmsjobs.c(build_vms_cmd): VMS commmand building with shell simulation.

2014-12-27  Christian Boos  <cboos@edgewall.org>  (tiny change)

	Fix $(shell) on hosts with 64-bit pid_t.
	* function.c: Use pid_t for shell_function_pid.
	* job.c: Likewise.

2014-10-20  Paul Smith  <psmith@gnu.org>

	* main.c (main): [SV 43434] Handle NULL returns from ttyname().

2014-10-20  Benedikt Morbach  <benedikt.morbach@googlemail.com>  (tiny change)

	* tests/scripts/features/archives: [SV 43405] override AR variable.

2014-10-20  John Malmberg  <wb8tyw@qsl.net>

	Fix VMS implicit rules and UNIX paths.
	This fixes VMS implicit rules and UNIX style pathname handling.
	It also fixes some of the VMS style pathname handling, more work
	there will be needed later.
	TODO: There are other case insensitive platforms besides VMS.
	We need to find out why there is extra VMS code for this.  This
	indicates either the extra VMS code is not needed, or the case
	insensitive support may not be complete on the other case
	insensitive platforms.

	* default.c: Add missing definitions to default_suffix_rules[] and
	default_variables[].
	TODO: As it is important that VMS DCL mode definitions must always
	be a superset of UNIX definitions, a better way of maintaining the
	VMS DCL mode definitions should be devised.
	* dir.c (downcase_inplace): Add a reentrant downcase() routine.
	Add future support for VMS 8.2+ _USE_STD_STAT macro which will
	disable a lot of VMS specific code from compiling.
	(dir_file_exists_p): vmsify filename only if directory name has VMS
	directory delimiters.
	(file_exists_p): Handle both VMS and UNIX directories.
	(file_impossible): Handle both VMS and Unix directories.  Track
	whether a VMS format path is needed for the return value.
	* file.c (lookup_file): Check if vmsify is needed; handle UNIX paths.
	* implicit.c (pattern_search): Enable UNIX paths.
	* read.c (parse_file_seq): Enable UNIX paths.
	* remake.c (f_mtime): Fix gpath_search call for VMS paths.
	* rule.c (count_implicit_rule): Enable UNIX paths, Fix VMS paths.
	* vpath.c (selective_vpath_search): Enable UNIX paths.

2014-10-20  John Malmberg  <wb8tyw@qsl.net>

	Update README.VMS and move news to the NEWS file
	* NEWS: Merge in VMS history.
	* README.VMS: Remove VMS history, document current behavior and
	known issues.

2014-10-20  John Malmberg  <wb8tyw@qsl.net>

	[SV 41758]: Fix archive support for VMS.
	Upated to match change to run_make_tests and some future fixes to
	make on VMS.

	* arscan.c: Use ANSI compatible pragmas instead of VAX C extensions.
	* tests/scripts/features/archives: Fix tests to use VMS rules and
	answers when running on VMS and using DCL as a shell.
	* tests/scripts/features/vpath3: Fix epected answer on test when
	run on VMS.
	* tests/scripts/vms/library: (New) Test the VMS library rules that
	are not tested by existing tests.

2014-10-20  John Malmberg  <wb8tyw@qsl.net>

	[SV 42447]: VMS simulate exporting symbols
	This also includes fixing the most of the exit handling code for VMS.

	Self tests:
	 Previously about 94 Tests in 36 categories fail.
	 Now about 45 tests in 22 categories fail.

	Because some tests do not properly clean up, the number of tests that
	fail can vary by one or two test cases between consecutive runs.

	* Makefile.am: Add new VMS files.
	* job.c: add prototype for vms_strsignal().
	* job.c: (child_error): Remove VMS specific code as no longer needed.
	* job.c: (reap_children): The VMS specific code was setting the
	status to 0 instead of setting it to the proper exit status.
	* job.h: Add vms_launch_status to struct child.
	* main.c: (main): Use environment variables for options to use MCR
	* instead of a foreign command, and to always use command files for
	subprocesses.
	For VMS use (set_program_name) routine which is common to ports of
	other GNU packages to VMS to set the program name used internally.
	Use (vms_putenv_symbol) to set up symbols to be visible in child
	programs, including recursive make launched by execve()
	Start of Bash shell detection code for VMS.
	* makefile.com: Need nested_include=none for building on VMS search
	lists.  Add vms_progname, vms_exit, and vms_export_symbol.
	* makefile.vms: Need nested_include=none for building on VMS search
	lists.  Add vms_progname, vms_exit, vms_export_symbol.
	* makeint.h: Make sure non-standard "VMS" macro is defined.  Add
	prototypes for new VMS routines.  Remove VMS-specific failure codes.
	* vmsjobs.c: Add VMS POSIX exit code constants.
	(_is_unixy_shell): Detect Bash shell.
	(vms_strsignal): simulate strsignal() on VMS.
	(vmsHandleChildTerm): fix to properly report failed LIB$SPAWN() exit
	status codes.  Remove code that duplicated code in job.c.
	(child_execute_job): Export environment symbols before spawning a
	child and restore afterward unless option to use command files for
	subprocesses is set.  Improve handling of UNIX null commands ":".
	* vms_exit.c: Provides vms_exit() to detect if an exit code is UNIX
	or VMS, and converts the UNIX code into a VMS exit code.
	* vms_export_symbol.c: Routines to create DCL symbols that work like
	shell aliases or exported shell symbols and clean them up on exit.
	* vms_export_symbol_test.com: Unit test for vms_export_symbol.c
	* vms_progname.c: New file: VMS specific replace for progname.c that
	is used in some GNU projects.

2014-10-20  John Malmberg  <wb8tyw@qsl.net>

	Set up for running tests on VMS.
	* run_make_tests.pl: set $port_type to be 'VMS-DCL' when the test are
	run from the VMS DCL Interpreter.  When the tests are run from GNV
	on VMS, the $port_type will be 'UNIX'.
	* run_make_tests.com: VMS search list support.  This is needed for
	using a search list such as prj_root = lcl_root:,vms_root:,src_root:
	for building and testing.

2014-10-09  Paul Smith  <psmith@gnu.org>

	* configure.ac, NEWS, README.git: Set up for the next release.

2014-10-05  Paul Smith  <psmith@gnu.org>

	GNU Make release 4.1.

2014-10-02  Eli Zaretskii  <eliz@gnu.org>

	Fix Cygwin compilation error.
	* job.c (construct_command_argv_internal) [HAVE_DOS_PATHS]: Fix
	initializer for sh_chars_sh.
	Reported by Denis Excoffier<cygwin@Denis-Excoffier.org>.

2014-10-01  Gisle Vanem  <gvanem@yahoo.no>

	Fix last commit.

	* makeint.h (ftruncate): Define also for __WATCOMC__.

2014-10-01  Eli Zaretskii  <eliz@gnu.org>

	Avoid compilation warnings.
	* main.c (find_and_set_default_shell, main) [WINDOWS32]: Declare
	variables 'const char *' to avoid compiler warnings.
	* job.c (construct_command_argv_internal) [!NDEBUG]: Declare 'end'
	and set it only if NDEBUG is not defined, to avoid compiler
	warnings.

	Treat redirection of standard handles on Windows as it is done on Unix.
	* job.c (start_job_command) [WINDOWS32]: Compute outfd and errfd
	as on Posix platforms, and pass the results to process_easy.
	* function.c (windows32_openpipe) [WINDOWS32]: Accept an
	additional argument ERRFD and use it for redirecting the standard
	error handle passed to the subprocess.
	(func_shell_base) [WINDOWS32]: Pass the computed errfd to
	windows32_openpipe.

2014-09-30  Paul Smith  <psmith@gnu.org>

	Update Copyright statements for 2014.

	* tests/scripts/features/load: Avoid unused variable warnings.

	* loadapi.c (gmk_eval): Use C90 syntax.

2014-09-30  Hartmut Becker  <becker.ismaning@freenet.de>

	* job.c: fix make action continuation lines.
	* vmsjobs.c: fix writing DCL command files when trimming (white
	  spaces and $ signs) especially after a split (command continuation).

2014-09-15  Bernhard Reutner-Fischer  <rep.dot.nop@gmail.com>  (tiny change)

	* configure.ac: Fix spacing in helptext of customs

2014-09-15  Eli Zaretskii  <eliz@gnu.org>

	Support MAKE_TERMOUT and MAKE_TERMERR on MS-Windows.
	* w32/compat/posixfcn.c (isatty, ttyname): New functions.
	* config.h.W32.template (HAVE_TTYNAME): Define.  Add a prototype
	for ttyname.

2014-09-15  Paul Smith  <psmith@gnu.org>

	* loadapi.c (gmk_eval): [SV 43221] Preserve var buff content for eval.

	* main.c, NEWS, doc/make.text: Rename MAKE_TTY* to MAKE_TERM*

2014-09-14  Paul Smith  <psmith@gnu.org>

	* main.c (main): Set MAKE_TTYOUT and MAKE_TTYERR.
	* configure.ac: Test for isatty() and ttyname()
	* makeint.h: provide a substitute for ttyname() if it's not available.
	* config.ami.template, config.h-vms.template, config.h.W32.template:
	define/undefine HAVE_ISATTY/HAVE_TTYNAME macros.
	* NEWS, doc/make.texi: Document these new variables.

2014-09-07  Paul Smith  <psmith@gnu.org>

	* tests/config-flags.pm.in, tests/scripts/features/archives: [SV 43046]
	Use the "ar" program detected by configure when running the test suite.

	* doc/make.texi: Clarify implicit rule lookup of phony targets
	Reported by Frank Heckenbach <f.heckenbach@fh-soft.de>

2014-09-07  Hartmut Becker  <becker.ismaning@freenet.de>

	Fix and enhance VMS library support.
	* ar.c: fix VMS library search for members, which do not have
	suffixes, aka filename extensions.
	* arscan.c: fix time conversion and library callback routines.
	* default.c: more suffixes and automatically create the VMS library
	if it doesn't exists.

	Enhance VMS exporting make environment variables.
	* config.h-vms.template: add feature macro USE_DCL_COM_FILE to always
	write a DCL command file, enabled by default.
	* vmsjobs.c: with USE_DCL_COM_FILE enabled write make variables as DCL
	symbol assignments into the command file.  This enables printing
	directory and make level info for recursive use of make. This also
	enables forced DCL symbol substitution in the actions.

	Fix VMS automatic variable expansion
	* function.c: add VMS code to func_notdir_suffix and func_basename_dir
	to work on comma separated lists; this fixes the expansion of
	$(^D), $(+D) and the F variants for VMS.

	* main.c [VMS]: Say that parallel jobs (-j) are not supported on VMS

	Enhance/fix VMS ONESHELL implementation and command execution
	* job.c, vmsjobs.c: fix some double quote and new line handling;
	implement ONESHELL with writing multiple lines into one DCL command
	procedure; in ONESHELL allow VMS/make internal redirection only on the
	first line; fix the created DCL command procedure, which didn't abort
	on errors; return correct exit status from the DCL command procedure;
	preserve current procedure verification; make the generated command
	procedure more robust.

	Enhance/fix VMS setting of program name, MAKE/MAKE_COMMAND variables
	* default.c, main.c, makeint.h, vmsfunctions.c: prefix argv[0] with
	"mcr " for MAKE/MAKE_COMMAND and set the program name to the image
	filename (without the .exe;version)
	* vmsfunctions.c: remove obsolete code
	* vmsify: use xmalloc

	Enhance/fix VMS exit code handling.
	* commands.c, function.c, hash.c, job.c, main.c, output.c:
	use MAKE exit codes.
	* makeint.h: encode make exit codes so that they are VMS compatible.
	* job.c: check child exit code for VMS style exit codes.
	* vmsjobs.c: save and return VMS style exit code.

	Enhance/fix VMS multi-line support.
	* job.c: split the command line at a newline.
	* default.c, vmsjobs.c: change ECHO variable to a pseudo builtin,
	which ensures that the VMS/DCL ECHO ("write sys$output") is used
	and is correctly quoted.
	* vmsjobs.c: remove unused builtin 'rm'.

	* config_flags_pm.com, [RENAMED test_make.com] run_make_tests.com:
	Moved into tests directory.

	Enhance/fix VMS build environment
	* config.h-vms.template: make sure the CRTL version is known
	* makefile.com: always compile/link the guile module, remove VAXCRTL
	parameter, new LIST parameter
	* makefile.vms: always compile/link the guile module, use more
	complete dependencies
	* prepare_vms.com: helper to create a VMS config file when building
	from a snapshot of the repository

2014-09-07  Paul Smith  <psmith@gnu.org>

	* configure.ac, maintMakefile, w32/Makefile.am: Fix autotools issues.
	Reported by Paul Eggert <eggert@cs.ucla.edu>

2014-08-30  Eli Zaretskii  <eliz@gnu.org>

	Change the order of "makefile" and "Makefile" to match the manual.

	Fix regression with "makefile" not being found on MS-Windows.
	* read.c (read_all_makefiles) [WINDOWS32]: Recognize "makefile",
	all-lowercase, as a makefile.  Reported by Michael Waeber
	<waeber@gmail.com>.

2014-07-16  Eli Zaretskii  <eliz@gnu.org>

	Fix compilation on MS-Windows.
	* makeint.h [WINDOWS32]: Don't declare 'program' as 'const char *',
	since it is modified in 'main'.

2014-07-12  Eli Zaretskii  <eliz@gnu.org>

	[SV 42695] Fix compilation error on MS-Windows.
	* main.c [WINDOWS32]: Don't declare 'program' as 'const char *',
	since it is modified in 'main'.

2014-07-12  Jonny Grant  <jg@jguk.org>  (tiny change)

	Fix defalt_makefiles[] for MS-Windows.
	* read.c (read_all_makefiles) [WINDOWS32]: Remove the redundant
	"makefile" and add "makefile.mak".

2014-07-07  Fredrik Fornwall  <fredrik@fornwall.net>  (tiny change)

	* arscan.c [ANDROID]: Android has no ar.h but supports archives.

2014-07-07  Paul Smith  <psmith@gnu.org>

	* read.c (eval): [SV 41677] Correct test for TAB vs. 8 spaces.

2014-07-07  Piotr Jaroszynski  <pjaroszynski@nvidia.com>  (tiny change)

	* output.c (pump_from_tmp): [SV 42378] Flush the output file regularly.

2014-07-07  John Malmberg  <wb8tyw@qsl.net>

	Update the regression test harness to support VMS.
	* config_flags_pm.com, test_make.com: set up and run the regression
	test environment on VMS.
	* tests/run_make_tests.pl [VMS]: Use an alternate rmdir()
	implementation on VMS.
	(run_make_with_options) [VMS]: Provide VMS-specific quoting and shell
	invocations.
	(set_more_defaults) [VMS]: Set default values when running on VMS.
	* tests/test_driver.pl (vms_get_process_logicals) [VMS]: Retrieve the
	proper values from %ENV on VMS.
	(resetENV) [VMS]: Use it.
	(toplevel) [VMS]: Fix a bug with opendir() on some logical_devices.
	(compare_output) [VMS]: Convert VMS test output to a "standard" format.
	(_run_command) [VMS]: Handle signals and exit codes the VMS way.
	(remove_directory_tree_inner) [VMS]: Unlink all versions of the file.

2014-07-07  Paul Smith  <psmith@gnu.org>

	* various: Assume ISO C89-compliant free() implementation.

	* maintMakefile, various: Improve constification of the codebase.

	[SV 41983] Support omitting the text argument to $(file ...)
	Reported by Tim Murphy <tnmurphy@gmail.com>
	* function.c (func_file): Only write TEXT if it is not NULL.
	* NEWS, doc/make.texi: Document the new feature
	* tests/scripts/functions/file: Verify that the no-text version of
	  $(file ...) works and doesn't add a newline.

2014-05-13  Jacques Germishuys  <jacques.germishuys@gmail.com>

	NMakefile.template ($(OUTDIR)/posixfcn.obj): Fix a typo.

2014-05-01  Paul Smith  <psmith@gnu.org>

	[SV 42249] Propagate correct rule status results.
	* remake.c (update_file, update_file_1, check_dep): Return an enum
	  update_status value instead of an int, and keep the highest value we
	  find as we walk the graph so that the ultimate status is correct.
	* tests/scripts/options/dash-q: Add a test for updating prerequisites.

2014-02-08  Paul Smith  <psmith@gnu.org>

	* Rename MAP_PATHSEP to MAP_DIRSEP.

	* configure.ac: Fixup for newer autoconf/automake

2014-02-08  Ray Donnelly  <mingw.android@gmail.com>  (tiny change)

	* output.c: Ensure space for final nul byte in fmtbuf.

2014-02-07  Gisle Vanem  <gvanem@yahoo.no>  (tiny change)

	Improve error reporting in the Windows port when env size is too large.
	w32/subproc/misc.c (arr2envblk): Compute and return the size of
	the environment passed to child process.

	w32/subproc/sub_proc.c (process_begin): If the call to
	CreateProcess failed with EINVAL, and the required environment
	size was larger than 32KB, assume it's a Windows XP limitation,
	and display an error message to that effect.

	w32/subproc/proc.h (arr2envblk): Update prototype.

2014-02-01  Paul Smith  <psmith@gnu.org>

	* job.c (set_child_handler_action_flags): [SV 41341]
	Ensure signal handler is in place before alarm(1).

2014-01-20  Alan Hourihane  <alanh@fairlite.co.uk>  (tiny change)

	* configure.ac: [SV 40790] Fix load autoconf variables.

2014-01-17  Pavel Fedin  <p.fedin@samsung.com>  (tiny change)

	Allow the EMX build to use output_sync.
	job.c (start_job_command): Move the child output diversion out
	of non-EMX branch.
	[__EMX__]: Don't use fixed FD_STDOUT and FD_STDERR in the call to
	child_execute_job.

2014-01-12  Paul Smith  <psmith@gnu.org>

	* commands.c: [SV 40789] Remove unneeded header dlfcn.h

	* main.c (die): Close output_context AND make_sync.
	die() can be invoked inside a separate output_context, if the
	$(error ...) function is expanded as part of a recipe.

2014-01-11  Pavel Fedin  <p.fedin@samsung.com>  (tiny change)

	Fix .LIBPATTERNS for MS-Windows builds.
	default.c (.LIBPATTERNS) [__CYGWIN__ || WINDOWS32]: Provide
	library patterns for MS-Windows.

2013-11-27  Paul Smith  <psmith@gnu.org>

	* w32/*: Remove TABs from the source code.
	I know whitespace commits are annoying, but having these TABs is
	causing me to miss things when I search through the code.  This
	doesn't try to change the w32 code to meet GNU coding standards.

	* main.c (decode_env_switches): Ensure we have enough space.
	Reported (with patch) by Gerte Hoogewerf <g.hoogewerf@gmail.com>

2013-11-27  Stephan T. Lavavej  <stl@nuwen.net>  (tiny change)

	Solve some Windows build issues.
	* main.c (main): Use ONS(), not OSN().
	(prepare_mutex_handle_string) [WINDOWS32]: Use %Ix formatting to
	support both 32bit and 64bit systems.
	* job.c (free_child, new_job): Use ONS(), not OSN().
	* w32/subproc/w32err.c (map_windws32_error_to_string): Use O() when
	calling fatal().

2013-11-24  Paul Smith  <psmith@gnu.org>

	* features/loadapi (test_expand): Allocate memory for the nul byte.

	* load.c (load_file): Reset the name length minus the symbol.

	* read.c (unescape_char): Use memmove() for overlapping memory.

	Fix memory leak during environment option decoding.
	* main.c (decode_switches): Always make a copy of option arguments.
	(decode_env_switches): Use a stack buffer to convert environment
	switches for parsing.

	[SV 40226] Add a new type of switch: single-string options
	* main.c (struct command_switch): Change the "string" types to "strlist"
	and make "string" be a single-valued string instead.
	(output_sync_option, jobserver_fds, sync_mutex): Change to string type.
	(decode_output_sync_flags): Handle single strings instead of lists.
	(prepare_mutex_handle_string): Ditto.
	(main): Ditto.
	(clean_jobserver): Ditto.
	(init_switches): Handle the new type.
	(decode_switches): Ditto.
	(define_makeflags): Ditto.

2013-11-23  Daniel Richard G  <skunk@iskunk.org>  (tiny change)

	* load.c: [SV 40515] Define RTLD_GLOBAL if not set.

2013-11-23  Paul Smith  <psmith@gnu.org>

	[SV 40361] Don't use vsnprintf(), which is an ISO C99 function.
	* output.c (error, fatal, message): Take an extra argument specifying
	how many bytes are used by the formatted arguments.
	(get_buffer): New function that allocates the requested buffer size.
	Remove msc_vsnprintf(), vfmtconcat(), and fmtconcat() as unneeded.
	* makeint.h: Declare various helper macros for generating output.
	* *.c: Change all error(), fatal(), message() calls to use the macros,
	or pass the extra length argument directly.

2013-10-27  Paul Smith  <psmith@gnu.org>

	* makeint.h (STOP_SET): [SV 40371] Cast to unsigned char.
	* tests/scripts/misc/utf8: Test variable names with characters >127.
	Fix suggested by Robert Bogomip <bob.bogo@milohedge.com>

2013-10-24  Gerte Hoogewerf  <g.hoogewerf@gmail.com>

	Fix MS Visual Studio NET2003 build.
	* make_msvc_net2003.vcproj: Do not exclude guile.c from compilation.

2013-10-23  Christian Boos  <cboos@edgewall.org>

	Fix SV bug #40227 with respect to stack size set for the MSVC build.
	* NMakefile.template (/STACK): Increase to 0x400000, mainly for
	the 64-bit builds.  Fixes SV bug #40227.
	(guile): Uncomment.

2013-10-23  Eli Zaretskii  <eliz@gnu.org>

	Fix the MS-Windows build: now guile.c must always be compiled in.
	* build_w32.bat: Always compile guile.c and link against guile.o.
	  Reported by Alexey Pavlov <alexpux@gmail.com>.

	* makeint.h (guile_gmake_setup): Define prototype unconditionally,
	to avoid compiler warnings.

2013-10-22  Eli Zaretskii  <eliz@gnu.org>

	Fix Savannah bug #31150 with failures due to setting window title.
	* sub_proc.c (process_begin): Don't set startInfo.lpTitle, it
	reportedly causes SV bug #31150, and according to MSDN it's a
	no-no.

	Fix Savannah bug 40241 with Unixy file names as commands to MSYS shell.
	* sub_proc.c: Include filedef.h and variable.h.
	(process_begin): If exec_path was not found, but its first
	character is '/', assume there's some shell magic, and invoke the
	command through '$(SHELL) -c "COMMAND"'.  Fixes SV bug#40241.
	(make_command_line): Kludgey feature: if full_exec_path is "-c",
	assume that argv[0] is not to be skipped, as it holds the command
	string to be passed to the shell.

2013-10-20  Paul Smith  <psmith@gnu.org>

	* glob.c (glob) [SV 18123]: Cherry-pick glibc fix
	Apply commit a471e96a5352a5f0bde6d32dd36d33524811a2b1 from
	git://sourceware.org/git/glibc.git to fix
	https://sourceware.org/bugzilla/show_bug.cgi?id=10278

	* read.c (record_files): [SV 33034] Change fatal() to error()
	Allows deprecated syntax.  However we don't guarantee this syntax
	will continue to be legal in the future.
	Change suggested by David Boyce <david.s.boyce@gmail.com>

	* README.git: Add some missing release steps.

2013-10-19  Paul Smith  <psmith@gnu.org>

	[SV 40240] Use configure info to build load test shared libs
	* tests/config-flags.pm.in: A new file containing variable assignments
	for the test suite; these variables are set by configure to contain
	the values detected there for compilers, flags, etc.
	* tests/run_make_tests.pl: Require the config-flags.pm file
	* tests/scripts/features/load, tests/scripts/features/loadapi: Use the
	configure-provided values when building the shared test library.
	* configure.ac: Replace tests/config-flags.pm.in
	* Makefile.am: Make sure tests/config-flags.pm is up to date

	* maintMakefile (checkcfg.%): Add testing of build.sh

	[SV 40254] Modify build.sh to work properly with Guile support.
	* guile.c (guile_gmake_setup) [HAVE_GUILE]: Define a stub function
	when Guile support is not enabled.
	* main.c (main) [HAVE_GUILE]: Always invoke guile_gmake_setup().
	* Makefile.am: Make guile.c standard, not optional.
	* build.template: Add the Guile compiler and linker flags.

	* maintMakefile: Accept variable overrides from the environment.

	* NEWS: Fix version so we can build a distfile.

	* read.c (eval): Avoid GCC warning to add braces.

	* GNUMAKEFLAGS: Remove -O so it passes in NO_OUTPUT_SYNC mode.

2013-10-18  Christian Boos  <cboos@edgewall.org>

	Fix initialization of stringlist variables for jobserver_fds and sync_mutex.
	 (tiny change)

	 main.c (prepare_mutex_handle_string, main): Initialize
	 stringlist variables with at least 2 members, as one member is not
	 currently supported.

2013-10-18  Eli Zaretskii  <eliz@gnu.org>

	Fix MinGW64 problem with non-compliant vsnprintf.
	 makeint.h (__USE_MINGW_ANSI_STDIO) [__MINGW64_VERSION_MAJOR]:
	 Define for MinGW64, to force it to use an ANSI-compliant
	 implementation of vsnprintf.  Reported by Christian Boos
	 <cboos@edgewall.org>.

	Fix the MSVC build on MS-Windows.
	 output.c (vsnprintf) [_MSC_VER]: Define, instead of defining
	 snprintf, which isn't used.  Reported by Christian Boos
	 <cboos@edgewall.org>.
	 NMakefile.template (OBJS): Add load.obj and posixfcn.obj.
	 ($(OUTDIR)/pathstuff.obj): New dependency.
	 Suggested by Christian Boos <cboos@edgewall.org>.

2013-10-13  Paul Smith  <psmith@gnu.org>

	[SV 40139] Modify "missing separator" for better translation

	Add support for updating the GNU make web pages.
	Add makefile rules for updating the http://www.gnu.org/software/make
	web pages, including the online GNU make manual.

	Convert to auto-generated ChangeLog files.
	Rename existing ChangeLog files so they won't be distributed.
	Add targets to maintMakefile to generate ChangeLog from the Git
	repository.  This will require a version of gnulib be available.
	Because ChangeLog is auto-generated, we have to switch our
	automake mode to "foreign" or it will complain and fail.

	Set up for the next release.