Arduino i2s

[audiobugz]

Hi, there just got the due board through the post wanted to connect the CS4398 DAC chip
Data sheet:
http://www.cirrus.com/en/pubs/proDatasheet/CS4398_F1.pdf
Wanted to use your example of the sine through but the library will not compile i have errors such as this is there some thing i could do to compile. I m very new to this and have tried to research with out any luck.
Any help would be great. Thanks

In file included from ssc.c:45:
ssc.h:48:17: error: sam.h: No such file or directory
In file included from ssc.c:45:
ssc.h:81: error: expected specifier-qualifier-list before 'uint32_t'
ssc.h:109: error: expected specifier-qualifier-list before 'uint32_t'
ssc.h:156: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_set_clock_divider'
ssc.h:157: error: expected ')' before '' token
ssc.h:159: error: expected ')' before '' token
ssc.h:161: error: expected ')' before '' token
ssc.h:162: error: expected ')' before '' token
ssc.h:163: error: expected ')' before '' token
ssc.h:164: error: expected ')' before '' token
ssc.h:165: error: expected ')' before '' token
ssc.h:166: error: expected ')' before '' token
ssc.h:167: error: expected ')' before '' token
ssc.h:168: error: expected ')' before '' token
ssc.h:169: error: expected ')' before '' token
ssc.h:170: error: expected ')' before '' token
ssc.h:171: error: expected ')' before '' token
ssc.h:172: error: expected ')' before '' token
ssc.h:173: error: expected ')' before '' token
ssc.h:174: error: expected ')' before '' token
ssc.h:175: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_rx_compare'
ssc.h:176: error: expected ')' before '' token
ssc.h:177: error: expected ')' before '' token
ssc.h:178: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_interrupt_mask'
ssc.h:179: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_status'
ssc.h:180: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_tx_ready'
ssc.h:181: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_tx_empty'
ssc.h:182: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_rx_ready'
ssc.h:183: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_tx_enabled'
ssc.h:184: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_rx_enabled'
ssc.h:193: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_write'
ssc.h:194: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_read'
ssc.h:195: error: expected ')' before '' token
ssc.h:196: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_read_sync_data'
ssc.h:202: error: expected ')' before '' token
ssc.h:203: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_writeprotect_status'
ssc.c:79: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_set_clock_divider'
ssc.c:102: error: expected ')' before '' token
ssc.c:182: error: expected ')' before '' token
ssc.c:252: error: expected ')' before '' token
ssc.c:267: error: expected ')' before '' token
ssc.c:277: error: expected ')' before '' token
ssc.c:287: error: expected ')' before '' token
ssc.c:297: error: expected ')' before '' token
ssc.c:307: error: expected ')' before '' token
ssc.c:317: error: expected ')' before '' token
ssc.c:328: error: expected ')' before '' token
ssc.c:344: error: expected ')' before '' token
ssc.c:359: error: expected ')' before '' token
ssc.c:370: error: expected ')' before '' token
ssc.c:382: error: expected ')' before '' token
ssc.c:416: error: expected ')' before '' token
ssc.c:450: error: expected ')' before '' token
ssc.c:470: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_rx_compare'
ssc.c:488: error: expected ')' before '' token
ssc.c:499: error: expected ')' before '' token
ssc.c:511: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_interrupt_mask'
ssc.c:523: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_status'
ssc.c:537: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_tx_ready'
ssc.c:554: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_tx_empty'
ssc.c:570: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_rx_ready'
ssc.c:586: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_tx_enabled'
ssc.c:602: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_is_rx_enabled'
ssc.c:701: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_write'
ssc.c:725: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_read'
ssc.c:748: error: expected ')' before '' token
ssc.c:763: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_read_sync_data'
ssc.c:801: error: expected ')' before '' token
ssc.c:817: error: expected '=', ',', ';', 'asm' or 'attribute' before 'ssc_get_writeprotect_status'

[delsauce]

Did you have the Due selected from the board menu in the Arduino IDE?
Looks like it can't find one of the core files that wouldn't be included if
building for another target...

On Mon, Dec 8, 2014 at 11:38 AM, audiobugz notifications@github.com wrote:

Hi, there just got the due board through the post wanted to connect the
CS4398 DAC chip
Data sheet:
http://www.cirrus.com/en/pubs/proDatasheet/CS4398_F1.pdf
Wanted to use your example of the sine through but the library will not
compile i have errors such as this is there some thing i could do to
compile. I m very new to this and have tried to research with out any luck.
Any help would be great. Thanks

In file included from ssc.c:45:
ssc.h:48:17: error: sam.h: No such file or directory
In file included from ssc.c:45:
ssc.h:81: error: expected specifier-qualifier-list before 'uint32_t'
ssc.h:109: error: expected specifier-qualifier-list before 'uint32_t'
ssc.h:156: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_set_clock_divider'
ssc.h:157: error: expected ')' before '
' token ssc.h:159: error: expected ')' before '' token
ssc.h:161: error: expected ')' before '
' token ssc.h:162: error: expected ')' before '' token
ssc.h:163: error: expected ')' before '
' token ssc.h:164: error: expected ')' before '' token
ssc.h:165: error: expected ')' before '
' token ssc.h:166: error: expected ')' before '' token
ssc.h:167: error: expected ')' before '
' token ssc.h:168: error: expected ')' before '' token
ssc.h:169: error: expected ')' before '
' token ssc.h:170: error: expected ')' before '' token
ssc.h:171: error: expected ')' before '
' token ssc.h:172: error: expected ')' before '' token
ssc.h:173: error: expected ')' before '
' token ssc.h:174: error: expected ')' before '' token
ssc.h:175: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_rx_compare'
ssc.h:176: error: expected ')' before '
' token ssc.h:177: error: expected ')' before '' token
ssc.h:178: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_interrupt_mask'
ssc.h:179: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_status'
ssc.h:180: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_tx_ready'
ssc.h:181: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_tx_empty'
ssc.h:182: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_rx_ready'
ssc.h:183: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_tx_enabled'
ssc.h:184: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_rx_enabled'
ssc.h:193: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_write'
ssc.h:194: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_read'
ssc.h:195: error: expected ')' before '

' token ssc.h:196: error: expected '=', ',', ';', 'asm' or 'attribute'
before 'ssc_read_sync_data' ssc.h:202: error: expected ')' before ''
token
ssc.h:203: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_writeprotect_status'
ssc.c:79: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_set_clock_divider'
ssc.c:102: error: expected ')' before '
' token ssc.c:182: error: expected ')' before '' token
ssc.c:252: error: expected ')' before '
' token ssc.c:267: error: expected ')' before '' token
ssc.c:277: error: expected ')' before '
' token ssc.c:287: error: expected ')' before '' token
ssc.c:297: error: expected ')' before '
' token ssc.c:307: error: expected ')' before '' token
ssc.c:317: error: expected ')' before '
' token ssc.c:328: error: expected ')' before '' token
ssc.c:344: error: expected ')' before '
' token ssc.c:359: error: expected ')' before '' token
ssc.c:370: error: expected ')' before '
' token ssc.c:382: error: expected ')' before '' token
ssc.c:416: error: expected ')' before '
' token ssc.c:450: error: expected ')' before '' token
ssc.c:470: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_rx_compare'
ssc.c:488: error: expected ')' before '
' token ssc.c:499: error: expected ')' before '' token
ssc.c:511: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_interrupt_mask'
ssc.c:523: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_status'
ssc.c:537: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_tx_ready'
ssc.c:554: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_tx_empty'
ssc.c:570: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_rx_ready'
ssc.c:586: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_tx_enabled'
ssc.c:602: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_is_rx_enabled'
ssc.c:701: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_write'
ssc.c:725: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_read'
ssc.c:748: error: expected ')' before '

' token ssc.c:763: error: expected '=', ',', ';', 'asm' or 'attribute'
before 'ssc_read_sync_data' ssc.c:801: error: expected ')' before ''
token
ssc.c:817: error: expected '=', ',', ';', 'asm' or 'attribute' before
'ssc_get_writeprotect_status'

—
Reply to this email directly or view it on GitHub
#5.

[audiobugz]

Hi, thanks for the super fast reply!! :) i was being silly in the excitement Arduino 1.0.6 was opening. Just ordered the CS 4272 as RS dint have the CS4272. How was your experience with the chips? Have you got any documentation on your project?

Thanks again for the quick reply!!

[delsauce]

I did this on the 4270, but don't really have much documentation... Chip
seemed to work fine, but I really didn't use the project all that much.

On Mon, Dec 8, 2014 at 12:42 PM, audiobugz notifications@github.com wrote:

Hi, thanks for the super fast reply!! :) i was being silly in the
excitement Arduino 1.0.6 was opening. Just ordered the CS 4272 as RS dint
have the CS4272. How was your experience with the chips? Have you got any
documentation on your project?

Thanks again for the quick reply!!

—
Reply to this email directly or view it on GitHub
#5 (comment)
.

[audiobugz]

Hey, finally got all parts for the build i have sorted the power section out. But cant find any I2S pin info on the Arduino Due is this some thing you could help me with? also did you have to set up the SPI to set configurations in the CS4270?

I'm trying to document the build so maybe it could help other using the your code.

Thanks any information is well appreciated!

[audiobugz]

Sorry delsauce if I'm bugging you but can you please help me understand your library a bit better.

1. Do i have still have to set the registers through the SPI bus to use your code?
2. Is the code using the CS4272 as the master with out a external clock such as the Due or crystal?

Thank you