local.ini.example

# Copy this file to `local.ini` after the repository is cloned so you can modify
# the serial ports without having your changes committed.

[env:playground]
debug_tool = blackmagic
upload_protocol = blackmagic

# PlatformIO attempts to auto-detect the debugger, but does not always find
# the right one.

# If it picks the wrong one, these must be set to the serial port to which 
# the debugger is connected. Uncomment the appropriate lines and modify 
# as needed. The serial port might change between uses. 

# There are two serial ports, one is UART data and one is the debugger. If
# PlatformIO hangs while attempting to program the board, the wrong port was
# selected and you'll need to manually select the other one here:

# macOS:
# debug_port = /dev/cu.usbmodemPLAYGRND1
# upload_port = /dev/cu.usbmodemPLAYGRND1

# Linux
#debug_port = /dev/ttyACM0
#upload_port = /dev/ttyACM0

# Windows (Use Device Manager to find the port)
#debug_port = COM3
#upload_port = COM3