Still unable to save hearing aid results

[belgareth]

Ok. I have tested the lastest and am still unable to save the hearing aid results..
Pixel 7, root kernelsu and android 16 latest march...

[kavishdevar]

After enabling the "Act as Apple device" from the app's settings, you need to restart Bluetooth and re-pair your AirPods a few times. This is because AirPods cache the VendorID your phone sends it when you first connect and is not updated immediately. Once you've done that, you can verify that the AirPods have read the new VendorID by trying to use Bluetooth Multipoint.

If you're using an Apple device, connect it first, and then your phone. Or, if you're using a Linux machine with the correct VendorID set in the BlueZ config, connect both in any order.

If the AirPods stay connected to both devices simultaneously, they've updated the VendorID.

Also, sometimes if you have an Apple device that's connected to AirPods along with your phone, the different connection that Hearing Aid needs is not able to proceed. So, disable Bluetooth on all other Apple devices, power down your AirPods, and connect them again only to your Android phone, and it should now work.

[kavishdevar]

Also, which Xposed framework are you using? Internal testing or Vector?

[belgareth]

Am isi

Also, which Xposed framework are you using? Internal testing or Vector?

Am using vector

[kavishdevar]

@belgareth were you able to save the settings?

[belgareth]

@kavishdevar I have had no luck so far with "you need to restart Bluetooth and re-pair your AirPods ". i have done about 4 times.

[kavishdevar]

Try the other steps I mentioned, it will work. If not, use adb to get the logs for the app and the Bluetooth app.

[belgareth]

Here are the logs
log.txt
librepods_filtered_log.txt
librepods_app_only_log.txt