Add Alder Lake support

[alyxandraio]

Copied the Comet Lake guide and edited it where needed based on vandroiy2013 and vit9696's reference config they provided me, among other resources.

Note to self and reviewers: SSDT links in ktext.md are placeholders and will be filled in once Getting Started with ACPI is updated. This has been resolved.

Closes dortania/bugtracker#257

[alyxandraio]

Also edited some things in ktext.md unrelated to Alder Lake.

[alyxandraio]

Need to figure out how to add the Alder Lake guide to the sidebar at some point, all I did was add the markdown file.

[averycblack]

.vuepress/config.js is where the sidebar is defined..

[alyxandraio]

I'm sure there's still some things that need tweaking, but it's at least in theory finished at this point. Opened up dortania/Getting-Started-With-ACPI#73 as well.

[alyxandraio]

@vandroiy2013 Do you happen to know the PciRoot path for the iGPU on Alder Lake? Couldn't find it in your Z690 reference config. I thought it would be a good idea to tell people to set the class-code property to FFFFFFFF in the DeviceProperties section of the config guide since most users would always want it disabled.

[vandroiy2013]

I suggest to disable IGPU in BIOS and not in DeviceProperties.

[alyxandraio]

Converted back to a draft since dortania/Getting-Started-With-ACPI#73 should include a section on SSDT-BRG0. Message link

[alyxandraio]

Added an SSDT-BRG0 guide to dortania/Getting-Started-With-ACPI#73. This PR should be ready for review again.

[averycblack]

Generally looks fine. Left a few small comments.

[dhinakg]

Cursory review

[woefi]

One last thing I noticed is the boot-arg for the intel 225-v, which is wrongly stated as dk.e1000=0 - should be e1000=0, IMHO.
see: dortania/bugtracker#213 (comment)
In my setup (ASUS Prime Z690-A) Ethernet only stopped panicking after I added this boot-arg.

[alyxandraio]

@woefi Yeah, you're right. Pretty sure it was changed in 12.3. I'll change that and make a PR for the rest of the guides at some point. Thanks.

[woefi]

Hmnn... I wonder why there is still not an "official" section for Alder Lake (or raptor lake fwiw).
I successfully used this guide (and some other infos scattered across the net) over the summer ´22 to build my Asus z690primeA / i5-12600k setup with Monterey. Then over the holidays updated to Ventura (13.1) and since then the only big problem for me is the ethernet panicking if plugged in (i225-V).

Because I'm not 100% confident about ALL of the parts of my EFI I would like to check against an "officially supported" guide.
Is there anything I could help with to speed this up?

[kimrenea]

Hmnn... I wonder why there is still not an "official" section for Alder Lake (or raptor lake fwiw). I successfully used this guide (and some other infos scattered across the net) over the summer ´22 to build my Asus z690primeA / i5-12600k setup with Monterey. Then over the holidays updated to Ventura (13.1) and since then the only big problem for me is the ethernet panicking if plugged in (i225-V).

Because I'm not 100% confident about ALL of the parts of my EFI I would like to check against an "officially supported" guide. Is there anything I could help with to speed this up?

I second this. Would be nice to have an official section for Alder Lake. I followed the guide all the way to ACPI, but then there's nothing after that.