Pinned Loading

1. MikroTik RouterOS v7 dual DHCP WAN r... MikroTik RouterOS v7 dual DHCP WAN recursive failover w/ PCC load-balancing; and recursive ECMP

   1

   # TL;DR: Default-Config Dual WAN PCC + Recursive Failover

   2

   3

   This paste assumes a **hardware MikroTik RouterBOARD with the standard MikroTik default config** — hAP, hEX, RB5009-class, etc. — where `ether1` is the WAN port and `ether2` through `etherN` are LAN bridge ports. The paste removes `ether2` from the LAN bridge and turns it into WAN2.

   4

   5

   If your router is **not** in that default state — CHR, multi-WAN appliances, anything reconfigured, or anything where `ether1` is not your WAN — read the [full guide](./01-mikrotik-routeros-v7-dual-wan-pcc-recursive-failover.md) and substitute interface names. The lab report's [§8.7 TL;DR validation](./02-vultr-chr-lab-setup-methodology-results.md#87-tldr-default-config-paste-validation) shows the kind of remap CHR needs before this paste is safe.

2. Ubiquiti UniFi Guest SSID on VLAN u... Ubiquiti UniFi Guest SSID on VLAN using MikroTik router hybrid port

   1

   - Main network on 192.168.88.0/24

   2

   - Guest network on 172.16.0.0/24 VLAN20

   3

   - UniFi AP is connected to a MikroTik router ether2 via DHCP assignment

   4

   - UniFi AP can be managed on via main network

   5

   - MikroTik initially on default configuration