Security

[English | 中文]

Project Overview

The current project mainly includes the implementation of TA, CA and set_model tools in openvela.

Among them, CA/TA is implemented based on the standard GP API. If our current device supports TEE, then we call openvela running in TEE openvela TEE, and openvela running in a normal environment openvela AP.

Among them, CA runs in openvela AP, and TA runs in openvela TEE. The overall communication process between CA and TA in openvela is as follows:

+-------------+ +---------------+
|[openvela AP] | |[openvela TEE] |
| | | |
| CA | | TA |
| | | | /|\ |
| \|/ | | | |
| LIB_TEEC | | TA MANAGER |
| | | | /|\ |
| \|/ | rpmsg socket | | |
| /dev/tee0 <----------------> opteed server |
|_____________| |_______________|

Project Description

CA

1 CA

1. comsst CA

   comsst CA is a CA program for communicating with comsst TA, which includes the input, read, verify and delete operations of comsst.

   comsst CA itself is a complete CA program, but users can also choose to define their own logic based on the API provided by comsst CA for secondary development.

2. pin CA

   pin CA is a CA program for communicating with pin TA, which includes the acquisition, storage, deletion and verification operations of pin.

   pin CA itself is a complete CA program, but users can also choose to define their own logic based on the API provided by pin CA for secondary development.

3. triad CA

   triad CA is a CA program used to communicate with triad TA, which includes the acquisition, deletion and update operations of the device key, did and did hmac. triad CA itself is a complete CA program, but users can also define their own logic based on the API provided by triad CA for secondary development.

2 TA

1. comsst TA

   comsst TA is mainly used to call the underlying TEE API to implement the input, read, verify and delete operations of comsst.

2. pin TA

   pin TA is mainly used to call the underlying TEE API to implement the input, read, update, delete and verify operations of pin.

3. triad TA

   triad TA is mainly used to call the underlying TEE API to implement the read, delete and write operations of the system key and did.

3 tools

tools mainly includes a set_model tool.

set_model tool is mainly used to store some key information of the device, such as the device's sn code, wifi mac address, bluetooth mac address, and the device's unique identifier did and other information.

The internal implementation principle of set_model is to save these key information through kvdb.

The specific location where these data are saved can be specified by passing the specified parameters to the set_model tool to specify the specific storage path.

Usage Guide

1 CA

1. comsst CA

   First, turn on the CONFIG_CA_COMSST_API option in openvela AP. Then, in the current project, a test program comsst api demo that fully uses the comsst CA API is provided.

2. pin CA

   First, turn on the CONFIG_CA_PIN_API option in openvela AP. Then, in the current project, a test program pin api demo that fully uses the pin CA API is provided.

3. triad CA

   First, turn on the CONFIG_CA_TRIAD_API option in openvela AP. Then, in the current project, a test program triad api demo that fully uses the triad CA API is provided.

2 TA

If we need to use the TA program in openvela, we need to enable the following configuration options in openvela TEE:

CONFIG_INTERPRETERS_WAMR=y
CONFIG_INTERPRETERS_WAMR_AOT=y
CONFIG_INTERPRETERS_WAMR_BUILD_MODULES_FOR_NUTTX=y
CONFIG_INTERPRETERS_WAMR_LIBC_BUILTIN=y
CONFIG_TA_TRIAD=y # If you use triad TA, you need to open this option
CONFIG_TA_COMSST=y # If you use comsst TA, you need to open this option
CONFIG_TA_PIN=y # If you use pin TA, you need to open this option

3 set_model

When using the set_model tool, we first need to turn on the CONFIG_SC_SET_MODEL option.

Since the set_model tool itself has many sub-functions, we need to turn on the corresponding options when using the corresponding functions.

The set_model tool is a command-line tool that can be run directly in nsh.

Below are the commands, parameters, and corresponding configuration options for running the set_model tool in nsh:

Command	Expected Result	Corresponding Configuration Options
set_model set sn 55119/F3YN00102	[ INFO] [ap] Set sn=55119/F3YN00102 success	SC_SET_MODEL_PRODUCT_ID
set_model set mac_wifi CC:D8:43:20:C4:22	[ INFO] [ap] Set mac_wifi=CC:D8:43:20:C4:22 success	SC_SET_MODEL_PRODUCT_HARDWARE
set_model set mac_bt CC:D8:43:20:C4:22	[ INFO] [ap] Set mac_bt=CC:D8:43:20:C4:22 success	SC_SET_MODEL_PRODUCT_HARDWARE
set_model set miio_did 771897593	[ INFO] [ap] Set miio_did=771897593 success	SC_SET_MODEL_PRODUCT_APP_ID
set_model set miio_key 0000000000000001	[ INFO] [ap] Set miio_key=0000000000000001 success	SC_SET_MODEL_PRODUCT_ID
set_model set color_id 0	[ INFO] [ap] Set color_id=0 success	SC_SET_MODEL_PRIORITY
set_model set color_desc 000000000000000	[ INFO] [ap] Set color_desc=000000000000000 success	SC_SET_MODEL_PRIORITY
set_model get	[ INFO] [ap] get /data/etc/device.info success	SC_SET_MODEL_PRIORITY
set_model setpsm	[ INFO] [ap] Writing psm path and set property success	SC_SET_MODEL_MIIO_PSM_PATH
set_model reset	[ INFO] [ap] Reset /data/etc/device.info success	CONFIG_SC_SET_MODEL