[PTL] Topology2 - Add support to generate a topology for everest codec +HDMI-In capture #10048
Conversation
CBala21
commented
Jun 9, 2025
CBala21
commented
- Added changes to create a topology binary with ace3 to support Everest codec on PTL platforms.
- Changes to create a topology binary with ace3 to support Everest codec+HDMI-in capture via I2S.
|
|
||
| # SSP codec topologies for PTL | ||
| # ES83x6 codec alone without HDMI-in capture | ||
| "cavs-es83x6\;sof-ptl-es83x6-ssp1\;PLATFORM=ptl,PREPROCESS_PLUGINS=nhlt,\ |
There was a problem hiding this comment.
Do we have a corresponding kernel change for the topology?
According to thesofproject/linux#5434, what we need is 'sof-ptl-es8336'
There was a problem hiding this comment.
Do we have a corresponding kernel change for the topology? According to thesofproject/linux#5434, what we need is 'sof-ptl-es8336'
@bardliao : there is no specific changes for this topology file name. The idea is to keep the topology file name as generic and rename it to respective driver name later(es8326/8336). Please suggest, does it ok or need one to one mapping with driver name.
There was a problem hiding this comment.
I would prefer to have all required topology files upstream. So that users can use it when they get the topology form https://github.com/thesofproject/sof-bin without renaming. @lgirdwood @kv2019i What do you think?
There was a problem hiding this comment.
@bardliao : updated the patch as you suggested. please check. Thanks.
There was a problem hiding this comment.
Yes, users should not have to rename files.
There was a problem hiding this comment.
@CBala21 .sof_tplg_filename = "sof-ptl-es8336", Will the -ssp1 suffix be added somewhere in the kernel? If not, I would suggest that we add a sof-ptl-es8336.tplg in the topology as the kernel may need it.
There was a problem hiding this comment.
@bardliao : Yes. The kernel will add the suffix SSP1 due to the quirk mask from kernel driver
.tplg_quirk_mask = SND_SOC_ACPI_TPLG_INTEL_SSP_NUMBER |
As of now, we are creating the tplg for SSP1. later if any product that requires for other SSP then should add the support in make file.
CBala21
force-pushed
the
ptl-Es8326+HDMI-In
branch
from
e65a329 to
181ffb1
Compare
Adding support to generate the topology binary with ace3 blob for the PTL products which contains everest SSP codec. Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
…apture Adding changes to create a topology binary with ace3 blob to support Es83x6 codec with HDMI-In capture via I2S. Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
CBala21
force-pushed
the
ptl-Es8326+HDMI-In
branch
from
181ffb1 to
1f6349b
Compare
|
@bardliao @CBala21 pls ping when thesofproject/linux#5434 is aligned/merged and then we can merge this. |
@lgirdwood : The kernel changes were got merged. Could you help to merge this topology changes. |
3 participants
